diff options
Diffstat (limited to 'include')
107 files changed, 2 insertions, 198 deletions
diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h index d7ec31708a..b8a25e95f3 100644 --- a/include/configs/am64x_evm.h +++ b/include/configs/am64x_evm.h @@ -18,17 +18,7 @@ /* DDR Configuration */ #define CONFIG_SYS_SDRAM_BASE1 0x880000000 -#if defined(CONFIG_TARGET_AM642_A53_EVM) -#else -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (TI_SRAM_SCRATCH_BOARD_EEPROM_START -\ - CONFIG_SPL_BSS_MAX_SIZE) +#if !defined(CONFIG_TARGET_AM642_A53_EVM) /* Set the stack right below the SPL BSS section */ /* Configure R5 SPL post-relocation malloc pool in DDR */ #define CONFIG_SYS_SPL_MALLOC_START 0x84000000 diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index 7849976d6f..06aade0b25 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -18,17 +18,7 @@ #define CONFIG_SYS_SDRAM_BASE1 0x880000000 /* SPL Loader Configuration */ -#ifdef CONFIG_TARGET_AM654_A53_EVM -#else -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) +#ifndef CONFIG_TARGET_AM654_A53_EVM /* Set the stack right below the SPL BSS section */ /* Configure R5 SPL post-relocation malloc pool in DDR */ #define CONFIG_SYS_SPL_MALLOC_START 0x84000000 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 85732e3f9d..17e2d2d7f6 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -41,7 +41,6 @@ #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_BSS_START_ADDR 0x70000000 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index b6346ae1df..d9b7269a1f 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -53,7 +53,6 @@ /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 446c5e1d3f..f436e8aa69 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -53,7 +53,6 @@ /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 7ca83a82fc..7a1b9dbd08 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x04000000 -#endif - #define RISCV_MMODE_TIMERBASE 0xe6000000 #define RISCV_MMODE_TIMER_FREQ 60000000 diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 6591de49c4..0f3b53c47a 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -68,7 +68,6 @@ * * ---------------------------------------------------------------------------- */ -#define CONFIG_SPL_BSS_START_ADDR 0x80A00000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index b22fc6c5dd..ad28251f1d 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SYS_SPL_MALLOC_START 0x00120000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_MALLOC_F_ADDR 0x00120000 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index d12feda16a..2c029f42b6 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -14,7 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SYS_SPL_MALLOC_START 0x00120000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 diff --git a/include/configs/ci20.h b/include/configs/ci20.h index f0497407af..bcec88415f 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -32,8 +32,6 @@ /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0xf4004000 - #define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 03f7ceb2f4..c2aef08dbf 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -45,8 +45,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA) /* SPL related MMC defines */ #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 62465acc97..914d7ec83d 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -37,8 +37,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (160 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/corvus.h b/include/configs/corvus.h index f15e15822e..864a79346b 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -55,8 +55,6 @@ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE - #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 209a1423c1..b488819249 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -32,7 +32,6 @@ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ -#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE /* memtest start addr */ /* memtest will be run on 16MB */ diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index e97ff21360..7357f9800f 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -35,6 +35,4 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) - #endif /* _CONFIG_DB_88F6720_H */ diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index 727756dbba..0b814f5e96 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -42,8 +42,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index c6ce784b4b..fe75666d05 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -42,8 +42,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index cade78b85d..808debc6f5 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -54,8 +54,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) - /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SPD_EEPROM 0x4e diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 6d0f63d075..b46f622690 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -23,8 +23,6 @@ * other needs. */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ - #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 16d59ed014..7fa1a4ebf0 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -46,8 +46,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) - /* Default Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 2bc9c99231..1c260c7ad4 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -15,7 +15,6 @@ * SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x00020000 #define CONFIG_SYS_SPL_MALLOC_START 0x00040000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff #define CONFIG_SYS_UBOOT_BASE 0xfff90000 diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 380622c9c7..ea54d9964f 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -34,7 +34,6 @@ /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index c012931722..d21a9b9383 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -17,7 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/helios4.h b/include/configs/helios4.h index 86d441b11b..90a631c376 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -45,8 +45,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA) /* SPL related MMC defines */ #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index daf44294a2..0b0cf9ddee 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -20,11 +20,9 @@ #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #else -#define CONFIG_SPL_BSS_START_ADDR 0x18200000 #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #endif diff --git a/include/configs/imx7_spl.h b/include/configs/imx7_spl.h index 9fe0dbdfe9..6f7ec9ea8c 100644 --- a/include/configs/imx7_spl.h +++ b/include/configs/imx7_spl.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ #endif -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 0e16d14f8b..638e8cc3b4 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -17,7 +17,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index d28774cddb..09788ebe24 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -14,7 +14,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index ed819e392a..17d0f19ef2 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_MONITOR_LEN SZ_1M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M /* 16 MiB */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index b6dda33317..a6ae1ab8bf 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -16,7 +16,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index ffe88f7027..b3ee0e2009 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -15,7 +15,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -# define CONFIG_SPL_BSS_START_ADDR 0x910000 # define CONFIG_SYS_SPL_MALLOC_START 0x42200000 # define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index eb30ed1b95..4b41f351d8 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -14,7 +14,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_1M diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 3b99ba41bd..5fac4ad5e6 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -14,7 +14,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x0095e000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/imx8mn_bsh_smm_s2_common.h b/include/configs/imx8mn_bsh_smm_s2_common.h index 60faedb76e..5aa5a311ca 100644 --- a/include/configs/imx8mn_bsh_smm_s2_common.h +++ b/include/configs/imx8mn_bsh_smm_s2_common.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#define CONFIG_SPL_BSS_START_ADDR 0x950000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index fac2c26146..8f199672ff 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -17,7 +17,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x950000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h index 699a51c1eb..d9cf466b0d 100644 --- a/include/configs/imx8mn_var_som.h +++ b/include/configs/imx8mn_var_som.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#define CONFIG_SPL_BSS_START_ADDR 0x950000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index 5807da5ac4..7a449c9f20 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -14,7 +14,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x950000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h index abe245748f..33b101daf9 100644 --- a/include/configs/imx8mp_dhcom_pdk2.h +++ b/include/configs/imx8mp_dhcom_pdk2.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_MONITOR_LEN SZ_1M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x0096FC00 #define CONFIG_SYS_SPL_MALLOC_START 0x4c000000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 kiB */ diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 1cfd63d78c..ba059f7d68 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -17,7 +17,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 97f66bddbc..f98f04b46f 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -27,7 +27,6 @@ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index 074f5b08fc..2933e4a5de 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -14,7 +14,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index fc4b1c5bf7..11ed33ddc8 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 179c5123d7..b9dbbb7d06 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -16,7 +16,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index bc749538d8..4507d7c54c 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 4f3e004f38..6971941785 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -15,7 +15,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SYS_SPL_MALLOC_START 0x00120000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 1f86b79d33..88d38a1dcb 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -10,8 +10,6 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 - #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 7afc64800e..0a6746c42c 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SYS_SPL_MALLOC_START 0x00120000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 55b1795634..34ebfda29f 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x22048000 #define CONFIG_SYS_SPL_MALLOC_START 0x22040000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000 /* 32 KB */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index ba3f9de6bf..8e7861fc91 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -24,15 +24,6 @@ /* Image load address in RAM for DFU boot*/ #else #define CONFIG_SYS_UBOOT_BASE 0x50080000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) /* Set the stack right below the SPL BSS section */ /* Configure R5 SPL post-relocation malloc pool in DDR */ #define CONFIG_SYS_SPL_MALLOC_START 0x84000000 diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index 3103face55..6099db1d42 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -25,15 +25,6 @@ /* Image load address in RAM for DFU boot*/ #else #define CONFIG_SYS_UBOOT_BASE 0x50080000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (0x41c80000 -\ - CONFIG_SPL_BSS_MAX_SIZE) /* Set the stack right below the SPL BSS section */ /* Configure R5 SPL post-relocation malloc pool in DDR */ #define CONFIG_SYS_SPL_MALLOC_START 0x84000000 diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index b2c826b6f1..eb6c5e6091 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -55,7 +55,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 08c6b80abb..f86b7fd471 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -17,7 +17,6 @@ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 52778dd02b..676e2c6ee4 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -41,7 +41,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index 56a0c996c0..2e077dd516 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -17,7 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 614b399af5..b592786fd8 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index fb50c82a65..bddd6be30d 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_MONITOR_LEN 0xc0000 #endif @@ -25,7 +24,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 3e9175f504..97c3bbeae5 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -47,7 +47,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #ifdef CONFIG_U_BOOT_HDR_SIZE /* diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 4470d974ca..1141a9b013 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #ifdef CONFIG_U_BOOT_HDR_SIZE /* diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index a09486a417..fee760f112 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) @@ -70,7 +69,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #ifdef CONFIG_NXP_ESBC diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 92fcc453f1..d283c8587a 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -46,7 +46,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 @@ -67,7 +66,6 @@ #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL) #define CONFIG_SPL_TARGET "spl/u-boot-spl.pbl" -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 @@ -79,7 +77,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 1b8180f6f1..83dcddafcf 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -144,7 +144,6 @@ unsigned long long get_qixis_addr(void); #endif #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index f33e369847..e32159baff 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -137,7 +137,6 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index d728c1fc11..db84302231 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -46,13 +46,6 @@ * L2 cache thus cannot be used. */ -/* SPL */ -/* Defines for SPL */ - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) - -/* SPL related SPI defines */ - /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_SDRAM_SIZE SZ_1G diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index 9ecc55cbf4..db4d68d750 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -19,7 +19,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index cc02cf0085..4dcfa39350 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -31,7 +31,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 6fefb1eab9..e3a679efe7 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -28,8 +28,6 @@ #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ -#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE - /* memtest start addr */ /* memtest will be run on 16MB */ diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index e194fbaeec..d3b638e838 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_256M #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x82000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x0100000 diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 284891414e..bf08e7a624 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -17,7 +17,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 99aecdad4e..c2e370d5a8 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -17,7 +17,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x98FC00 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 10e3e23e8d..508909a744 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 6f49568484..614bfad0e4 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -48,7 +48,6 @@ #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_BSS_START_ADDR 0x70000000 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 diff --git a/include/configs/px30_common.h b/include/configs/px30_common.h index 1cf239f8a6..96dcfb420f 100644 --- a/include/configs/px30_common.h +++ b/include/configs/px30_common.h @@ -13,7 +13,6 @@ /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */ #define CONFIG_IRAM_BASE 0xff020000 -#define CONFIG_SPL_BSS_START_ADDR 0x4000000 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define GICD_BASE 0xff131000 diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h index 15e8ae922e..9f4752a88f 100644 --- a/include/configs/qemu-riscv.h +++ b/include/configs/qemu-riscv.h @@ -10,7 +10,6 @@ #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 #define CONFIG_SYS_SPL_MALLOC_START 0x84100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 6cda69159b..ee9fc2862e 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -43,11 +43,4 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" -/* SPL support */ -#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) -#define CONFIG_SPL_BSS_START_ADDR 0xe633f000 -#else -#define CONFIG_SPL_BSS_START_ADDR 0xe631f000 -#endif - #endif /* __RCAR_GEN3_COMMON_H */ diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 2b0b367df7..169cf2ac9c 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -8,8 +8,6 @@ #include "rockchip-common.h" -#define CONFIG_SPL_BSS_START_ADDR 0x00400000 - #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_IRAM_BASE 0xfff80000 diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index 25e2c65900..9cdc9004a9 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -10,8 +10,6 @@ #define CONFIG_IRAM_BASE 0xff090000 -#define CONFIG_SPL_BSS_START_ADDR 0x2000000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ /* FAT sd card locations. */ diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index 1bdc8cf187..ac88188682 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -16,8 +16,6 @@ #define CONFIG_IRAM_BASE 0xff8c0000 -#define CONFIG_SPL_BSS_START_ADDR 0x400000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 112b8639ad..3ca80c8c7c 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -11,10 +11,8 @@ #define CONFIG_IRAM_BASE 0xff8c0000 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) -#define CONFIG_SPL_BSS_START_ADDR 0x00400000 #else /* BSS setup */ -#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000 #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h index c0721aa1af..f9c7c23cd9 100644 --- a/include/configs/rk3568_common.h +++ b/include/configs/rk3568_common.h @@ -10,8 +10,6 @@ #define CONFIG_IRAM_BASE 0xfdcc0000 -#define CONFIG_SPL_BSS_START_ADDR 0x4000000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define CONFIG_SYS_SDRAM_BASE 0 diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index dd5f8d8c80..8a39069c21 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h index 728dc9fb98..14a6e0f051 100644 --- a/include/configs/sama5d27_wlsom1_ek.h +++ b/include/configs/sama5d27_wlsom1_ek.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 0645c21b61..3b1e80921e 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -27,7 +27,6 @@ #endif /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 8481b0262c..88020536c0 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -12,7 +12,6 @@ #include "at91-sama5_common.h" /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 23ffab226b..eb8f15f310 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -49,7 +49,6 @@ #endif /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index e293002f39..fe3adece81 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -61,7 +61,6 @@ #endif /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 825925c114..c589b07af4 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -26,7 +26,6 @@ #endif /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index d2466da6fc..d5cfd2115d 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -26,7 +26,6 @@ #endif /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 8a81ae4081..4d2e927f4f 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -52,8 +52,6 @@ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 - #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 9a460de077..9734e1e75f 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x85000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index 6453cc9329..be19471471 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -13,7 +13,6 @@ #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x85000000 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d84a2c262e..1e5087444c 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -114,7 +114,6 @@ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 923da0ef99..9f17cd6f13 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -48,7 +48,6 @@ * SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index b73ce91760..a79423740b 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -144,8 +144,6 @@ unsigned int cm_get_l4_sys_free_clk_hz(void); * */ #define CONFIG_SPL_TARGET "spl/u-boot-spl-dtb.hex" -#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \ - - CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \ - CONFIG_SYS_SPL_MALLOC_SIZE) diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3431366bcd..5b543fd2db 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -49,16 +49,13 @@ #ifdef CONFIG_MACH_SUN9I #define SDRAM_OFFSET(x) 0x2##x #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 #elif defined(CONFIG_MACH_SUNIV) #define SDRAM_OFFSET(x) 0x8##x #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SPL_BSS_START_ADDR 0x81f80000 #else #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* V3s do not have enough memory to place code at 0x4a000000 */ -#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 #endif /* diff --git a/include/configs/taurus.h b/include/configs/taurus.h index d7dba72db4..ef856f07fd 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -146,8 +146,6 @@ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE - #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index e5e21ef3bb..c81e89eed8 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -74,8 +74,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) - /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_SDRAM_SIZE SZ_2G diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 9c1f5ea7c8..777e78859b 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -86,8 +86,6 @@ /* Defines for SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 - #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 /* diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 316a21524f..7a19fc4b58 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -113,9 +113,6 @@ * of the BSS area. We suggest that the stack be placed at 32MiB after the * start of DRAM to allow room for all of the above (handled in Kconfig). */ -#ifndef CONFIG_SPL_BSS_START_ADDR -#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 -#endif #ifndef CONFIG_SYS_SPL_MALLOC_START #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 1cc593fdea..4a6d9bfddd 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -25,8 +25,6 @@ #endif /* SPL SPI Loader Configuration */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_ISW_ENTRY_ADDR + \ - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 4dc27a31a4..4bbc992c9f 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -29,8 +29,6 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC /* SPL related MMC defines */ # ifdef CONFIG_SPL_BUILD diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index de79691782..4fc7617c77 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index e6eb986466..47bb532494 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -15,7 +15,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_BSS_START_ADDR 0x0098fc00 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 5a215f14fd..6a7a0832c9 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -17,7 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/x530.h b/include/configs/x530.h index 8b690cd9bf..e66d8af802 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -69,6 +69,4 @@ /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) - #endif /* _CONFIG_X530_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index b6f345b17a..3e766b5180 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -199,9 +199,6 @@ "dfu_bufsiz=0x1000\0" #endif -/* Just random location in OCM */ -#define CONFIG_SPL_BSS_START_ADDR 0x0 - #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) # define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000 # define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index a0e276bcc4..d29d423e11 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -238,7 +238,4 @@ * Set it up as limit for now. */ -/* BSS setup */ -#define CONFIG_SPL_BSS_START_ADDR 0x100000 - #endif /* __CONFIG_ZYNQ_COMMON_H */ diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h index ff9d6d15dc..cb982c2e74 100644 --- a/include/configs/zynq_cse.h +++ b/include/configs/zynq_cse.h @@ -18,7 +18,5 @@ #undef CONFIG_SYS_INIT_RAM_SIZE #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFDE000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#undef CONFIG_SPL_BSS_START_ADDR -#define CONFIG_SPL_BSS_START_ADDR 0x20000 #endif /* __CONFIG_ZYNQ_CSE_H */ |