diff options
Diffstat (limited to 'include')
198 files changed, 405 insertions, 847 deletions
diff --git a/include/atf_common.h b/include/atf_common.h new file mode 100644 index 00000000000..8c513e7c3e0 --- /dev/null +++ b/include/atf_common.h @@ -0,0 +1,183 @@ +/* + * This is from the ARM TF Project, + * Repository: https://github.com/ARM-software/arm-trusted-firmware.git + * File: include/common/bl_common.h + * Portions copyright (c) 2013-2016, ARM Limited and Contributors. All rights + * reserved. + * Copyright (C) 2016-2017 Rockchip Electronic Co.,Ltd + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __BL_COMMON_H__ +#define __BL_COMMON_H__ + +#define ATF_PARAM_EP 0x01 +#define ATF_PARAM_IMAGE_BINARY 0x02 +#define ATF_PARAM_BL31 0x03 + +#define ATF_VERSION_1 0x01 + +#define ATF_EP_SECURE 0x0 +#define ATF_EP_NON_SECURE 0x1 + +#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \ + (_p)->h.type = (uint8_t)(_type); \ + (_p)->h.version = (uint8_t)(_ver); \ + (_p)->h.size = (uint16_t)sizeof(*_p); \ + (_p)->h.attr = (uint32_t)(_attr) ; \ + } while (0) + +#define MODE_RW_SHIFT 0x4 +#define MODE_RW_MASK 0x1 +#define MODE_RW_64 0x0 +#define MODE_RW_32 0x1 + +#define MODE_EL_SHIFT 0x2 +#define MODE_EL_MASK 0x3 +#define MODE_EL3 0x3 +#define MODE_EL2 0x2 +#define MODE_EL1 0x1 +#define MODE_EL0 0x0 + +#define MODE_SP_SHIFT 0x0 +#define MODE_SP_MASK 0x1 +#define MODE_SP_EL0 0x0 +#define MODE_SP_ELX 0x1 + +#define SPSR_DAIF_SHIFT 6 +#define SPSR_DAIF_MASK 0x0f + +#define SPSR_64(el, sp, daif) \ + (MODE_RW_64 << MODE_RW_SHIFT | \ + ((el) & MODE_EL_MASK) << MODE_EL_SHIFT | \ + ((sp) & MODE_SP_MASK) << MODE_SP_SHIFT | \ + ((daif) & SPSR_DAIF_MASK) << SPSR_DAIF_SHIFT) + +#define SPSR_FIQ (1 << 6) +#define SPSR_IRQ (1 << 7) +#define SPSR_SERROR (1 << 8) +#define SPSR_DEBUG (1 << 9) +#define SPSR_EXCEPTION_MASK (SPSR_FIQ | SPSR_IRQ | SPSR_SERROR | SPSR_DEBUG) + +#define DAIF_FIQ_BIT (1<<0) +#define DAIF_IRQ_BIT (1<<1) +#define DAIF_ABT_BIT (1<<2) +#define DAIF_DBG_BIT (1<<3) +#define DISABLE_ALL_EXECPTIONS \ + (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT | DAIF_DBG_BIT) + +#ifndef __ASSEMBLY__ + +/******************************************************************************* + * Structure used for telling the next BL how much of a particular type of + * memory is available for its use and how much is already used. + ******************************************************************************/ +struct aapcs64_params { + unsigned long arg0; + unsigned long arg1; + unsigned long arg2; + unsigned long arg3; + unsigned long arg4; + unsigned long arg5; + unsigned long arg6; + unsigned long arg7; +}; + +/*************************************************************************** + * This structure provides version information and the size of the + * structure, attributes for the structure it represents + ***************************************************************************/ +struct param_header { + uint8_t type; /* type of the structure */ + uint8_t version; /* version of this structure */ + uint16_t size; /* size of this structure in bytes */ + uint32_t attr; /* attributes: unused bits SBZ */ +}; + +/***************************************************************************** + * This structure represents the superset of information needed while + * switching exception levels. The only two mechanisms to do so are + * ERET & SMC. Security state is indicated using bit zero of header + * attribute + * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start + * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while + * processing SMC to jump to BL31. + *****************************************************************************/ +struct entry_point_info { + struct param_header h; + uintptr_t pc; + uint32_t spsr; + struct aapcs64_params args; +}; + +/***************************************************************************** + * Image info binary provides information from the image loader that + * can be used by the firmware to manage available trusted RAM. + * More advanced firmware image formats can provide additional + * information that enables optimization or greater flexibility in the + * common firmware code + *****************************************************************************/ +struct atf_image_info { + struct param_header h; + uintptr_t image_base; /* physical address of base of image */ + uint32_t image_size; /* bytes read from image file */ +}; + +/***************************************************************************** + * The image descriptor struct definition. + *****************************************************************************/ +struct image_desc { + /* Contains unique image id for the image. */ + unsigned int image_id; + /* + * This member contains Image state information. + * Refer IMAGE_STATE_XXX defined above. + */ + unsigned int state; + uint32_t copied_size; /* image size copied in blocks */ + struct atf_image_info atf_image_info; + struct entry_point_info ep_info; +}; + +/******************************************************************************* + * This structure represents the superset of information that can be passed to + * BL31 e.g. while passing control to it from BL2. The BL32 parameters will be + * populated only if BL2 detects its presence. A pointer to a structure of this + * type should be passed in X0 to BL31's cold boot entrypoint. + * + * Use of this structure and the X0 parameter is not mandatory: the BL31 + * platform code can use other mechanisms to provide the necessary information + * about BL32 and BL33 to the common and SPD code. + * + * BL31 image information is mandatory if this structure is used. If either of + * the optional BL32 and BL33 image information is not provided, this is + * indicated by the respective image_info pointers being zero. + ******************************************************************************/ +struct bl31_params { + struct param_header h; + struct atf_image_info *bl31_image_info; + struct entry_point_info *bl32_ep_info; + struct atf_image_info *bl32_image_info; + struct entry_point_info *bl33_ep_info; + struct atf_image_info *bl33_image_info; +}; + +/******************************************************************************* + * This structure represents the superset of information that is passed to + * BL31, e.g. while passing control to it from BL2, bl31_params + * and other platform specific params + ******************************************************************************/ +struct bl2_to_bl31_params_mem { + struct bl31_params bl31_params; + struct atf_image_info bl31_image_info; + struct atf_image_info bl32_image_info; + struct atf_image_info bl33_image_info; + struct entry_point_info bl33_ep_info; + struct entry_point_info bl32_ep_info; + struct entry_point_info bl31_ep_info; +}; + +#endif /*__ASSEMBLY__*/ + +#endif /* __BL_COMMON_H__ */ diff --git a/include/common.h b/include/common.h index 83e4037a86d..45f190a600f 100644 --- a/include/common.h +++ b/include/common.h @@ -499,9 +499,19 @@ void reset_phy (void); void fdc_hw_init (void); /* $(BOARD)/eeprom.c */ +#ifdef CONFIG_CMD_EEPROM void eeprom_init (int bus); int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); +#else +/* + * Some EEPROM code is depecated because it used the legacy I2C interface. Add + * some macros here so we don't have to touch every one of those uses + */ +#define eeprom_init(bus) +#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) +#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) +#endif /* * Set this up regardless of board diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index abfdbc92767..2041b7bb3e5 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -723,9 +723,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 6f333e75ef7..72dc8ba7104 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -334,9 +334,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SHA_HW_ACCEL #endif -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 9097932581c..1b956fc7da6 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -476,8 +476,7 @@ combinations. this should be removed later #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #endif -#define CONFIG_USB_EHCI /* USB */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 7f5eecaad52..3f7c1c9988f 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -88,7 +88,6 @@ /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI #define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 #define CONFIG_SYS_USB_EHCI_CPU_INIT #endif diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 1817571efe4..7b162cccefe 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -166,7 +166,6 @@ /* I2c */ #undef CONFIG_SYS_FSL_I2C -#undef CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SPEED 80000 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 493e3fa646d..fbe033afb13 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -366,7 +366,6 @@ #define CONFIG_HAS_FSL_DR_USB #define CONFIG_SYS_SCCR_USBDRCM 3 -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_PHY_TYPE "utmi" #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 719c27966a3..6d35d705ecc 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -148,7 +148,6 @@ /* * Support USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL /* Current USB implementation supports the only USB controller, diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 85b7c48fdfa..fcced0eb86c 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -376,7 +376,6 @@ extern int board_pci_host_broken(void); #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index d39dc1b465c..607b9266d2f 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -651,7 +651,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index aeb9f0bbaf0..8375ead394c 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -609,9 +609,7 @@ */ #define CONFIG_HAS_FSL_MPH_USB #ifdef CONFIG_HAS_FSL_MPH_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 8f7e056606e..b186e012d36 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -359,9 +359,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * USB */ -#define CONFIG_USB_EHCI -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_EHCI_DEVICE 0 diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index e6aca11e500..2c1be228eeb 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -559,9 +559,8 @@ /* * USB */ -#define CONFIG_USB_EHCI -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_EHCI_DEVICE 0 diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 95b42208e93..867004fb489 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -670,9 +670,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif @@ -733,7 +731,7 @@ extern unsigned long get_sdram_size(void); #undef CONFIG_WATCHDOG /* watchdog disabled */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ || defined(CONFIG_FSL_SATA) #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index db66c309e7f..0763cf312e0 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -606,9 +606,7 @@ */ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 787b8d206ef..8821be3410d 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -253,9 +253,7 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index c3e3fae44f0..7629fe8eb49 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -594,7 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 4da829d8389..42e692c4a02 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -637,7 +637,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 3b55404cdab..c2175bda345 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -641,7 +641,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index b2810b65f9b..25658871e47 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -527,9 +527,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 55774080152..d2ece40d4ac 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -637,9 +637,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a32ddeed1d2..02fd37d5cb3 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -12,7 +12,6 @@ #define __T208xQDS_H #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI #if defined(CONFIG_ARCH_T2080) #define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ @@ -702,7 +701,7 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 90ce554035d..faa1111e9f1 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -12,7 +12,6 @@ #define __T2080RDB_H #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI #define CONFIG_FSL_SATA_V2 /* High Level Configuration Options */ @@ -652,7 +651,7 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 9d4baaa79fc..5d030d11796 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -507,7 +507,6 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index cc1f79940cf..8ebfde19f93 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 13f4ef67e19..19e0b1be1bd 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -124,8 +124,7 @@ #ifndef CONFIG_CAM5200 /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_I2C) + CONFIG_SYS_POST_CPU) #endif #ifdef CONFIG_POST @@ -144,7 +143,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO @@ -279,54 +277,6 @@ #endif /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#ifdef CONFIG_TQM5200_REV100 -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ -#else -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ -#endif - -/* - * I2C clock frequency - * - * Please notice, that the resulting clock frequency could differ from the - * configured value. This is because the I2C clock is derived from system - * clock over a frequency divider with only a few divider values. U-Boot - * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated - * approximation allways lies below the configured value, never above. - */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work - * also). For other EEPROMs configuration should be verified. On Mini-FAP the - * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the - * same configuration could be used. - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* - * HW-Monitor configuration on Mini-FAP - */ -#if defined (CONFIG_MINIFAP) -#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C -#endif - -/* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_MINIFAP) -#undef CONFIG_SYS_POST_I2C_ADDRS -#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE} -#endif - -/* * Flash configuration */ #define CONFIG_SYS_FLASH_BASE 0xFC000000 @@ -545,18 +495,6 @@ #endif /* - * RTC configuration - */ -#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100) -# define CONFIG_RTC_M41T11 1 -# define CONFIG_SYS_I2C_RTC_ADDR 0x68 -# define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base - year */ -#else -# define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index c60743acd08..cd46db4f6f3 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -453,11 +453,9 @@ #define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 79099518e7b..2ea43ffce1f 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -81,7 +81,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #if defined(CONFIG_PCI) @@ -146,25 +145,6 @@ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#define CONFIG_SYS_EEPROM_WREN 1 -#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4 - -/* * Flash configuration */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index ee015bb83d4..2a46e9b8647 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -336,29 +336,12 @@ #define CONFIG_CMDLINE_EDITING 1 /* command line history */ -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS - -/* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - /* * IIM - IC Identification Module */ #undef CONFIG_FSL_IIM /* - * EEPROM configuration for Atmel AT24C01: - * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 30 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 - -/* * Ethernet configuration */ #define CONFIG_MPC512x_FEC 1 @@ -384,7 +367,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FUSE #undef CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 52f84756697..b76f376a042 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -55,8 +55,6 @@ #define CONFIG_BOUNCE_BUFFER /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/alt.h b/include/configs/alt.h index d8a66f2d7d3..16525087f18 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 8be49af9f11..5de39cf740f 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -16,9 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ - #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include <asm/arch/cpu.h> /* get chip and board defs */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 7490f2b5eaf..feb7b6eb974 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -13,10 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ - -#define CONFIG_OMAP - #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ @@ -49,9 +45,6 @@ /* Hardware drivers */ -/* OMAP GPIO configuration */ -#define CONFIG_OMAP_GPIO - /* NS16550 Configuration */ #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index 5f5882dc8e7..d3d72b634d6 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -35,20 +35,6 @@ #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* I2C */ -#define CONFIG_SH_SH7734_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_MODULE 0 -#define CONFIG_SYS_I2C_SPEED 400000 /* 400 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x50 -#define CONFIG_SH_I2C_DATA_HIGH 4 -#define CONFIG_SH_I2C_DATA_LOW 5 -#define CONFIG_SH_I2C_CLOCK 500000000 -#define CONFIG_SH_I2C_BASE0 0xFFC70000 -#define CONFIG_SH_I2C_BASE1 0xFFC71000 - /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index c6c956e1ee1..2c49729caab 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_MMC_ENV_PART 1 /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* PCI host support */ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index e2acc6e8c9c..cdb50cc28b8 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_MMC_ENV_PART 1 /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* PCI host support */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index a4c7847dab2..cce39f27c7d 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -79,12 +79,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif -/* RTC */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 -#endif - /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTCOMMAND "run bootcmd_nand" diff --git a/include/configs/aria.h b/include/configs/aria.h index 94f6605d468..4d946fc44a9 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -340,32 +340,12 @@ #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS - -/* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7F -#if 0 -#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ -#endif - /* * IIM - IC Identification Module */ #undef CONFIG_FSL_IIM /* - * EEPROM configuration for Atmel AT24C32A-10TQ-2.7: - * 16-bit addresses, 10ms write delay, 32-Byte Page Write Mode - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 - -/* * Ethernet configuration */ #define CONFIG_MPC512x_FEC 1 @@ -392,7 +372,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FUSE #undef CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index 4d16d335854..7360e11ff14 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -202,8 +202,6 @@ #define CONFIG_RTC_M41T11 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 52a051a1375..a5489cd28c9 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -51,7 +51,7 @@ #define CONFIG_CMD_NAND /* - * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0) + * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) * NB: in this case, USB 1.1 devices won't be recognized. */ @@ -99,7 +99,7 @@ /* USB */ #ifdef CONFIG_CMD_USB -#ifndef CONFIG_USB_EHCI +#ifndef CONFIG_USB_EHCI_HCD #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index 768e8fbfa42..66e8cd5e9a4 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -100,7 +100,7 @@ /* * Environment settings */ -#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE SZ_512 #define CONFIG_ENV_OFFSET 0 diff --git a/include/configs/beaver.h b/include/configs/beaver.h index cc328611695..f3d7a2fad2f 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -39,7 +39,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 0c1a54d7ba2..521d097f8a9 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -20,9 +20,6 @@ #define CONFIG_LCD_DT_SIMPLEFB #define LCD_BPP LCD_COLOR32 -#define CONFIG_HW_WATCHDOG -#define CONFIG_OMAP_WATCHDOG - /* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3742514a6e6..7aad7ea51f6 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -13,7 +13,6 @@ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ #define CONFIG_AM33XX -#define CONFIG_OMAP #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* Timer information */ @@ -76,8 +75,6 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX -/* GPIO */ -#define CONFIG_OMAP_GPIO /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index e338f9bdd25..f1b5a71edf1 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -43,7 +43,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 8185926590e..fd8df46776f 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -38,7 +38,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index e05db3ed8a1..cad1357f5cf 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -61,8 +61,6 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 0073cb53736..3a7d826837e 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -44,7 +44,7 @@ /* * POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C) +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU) #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) /* List of I2C addresses to be verified by POST */ #define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ @@ -200,16 +200,6 @@ "-(config)" /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 */ -#define CONFIG_SYS_I2C_SPEED 40000 /* 40 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ -#define CONFIG_SYS_I2C_EEPROM 0x53 /* I2C EEPROM device address */ - -/* * RTC configuration */ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index dfdad6c3d09..1898e3837d5 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -22,8 +22,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -77,8 +75,6 @@ /* USB */ #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB @@ -248,14 +244,7 @@ #define CONFIG_SPLASHIMAGE_GUARD -/* GPIO banks */ -#ifdef CONFIG_LED_STATUS -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif - /* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 #define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16 diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index e12dc020ff7..0df7d4269cb 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -13,7 +13,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_CM_T3517 /* working with CM-T3517 */ #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -80,15 +79,11 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_OMAP_GPIO - /* USB */ #define CONFIG_USB_MUSB_AM35X #ifndef CONFIG_USB_MUSB_AM35X #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 #else /* !CONFIG_USB_MUSB_AM35X */ @@ -250,14 +245,7 @@ /* Status LED */ #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ -/* GPIO banks */ -#ifdef CONFIG_LED_STATUS -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif - /* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 #define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16 diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 477aa07bd89..ccaa5680094 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -58,8 +58,6 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) /* USB UHH support options */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET @@ -86,9 +84,6 @@ #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 -/* Max time to hold reset on this board, see doc/README.omap-reset-time */ -#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 - /* * Miscellaneous configurable options */ diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 023e75cf33d..03f6863169d 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -25,7 +25,6 @@ #define CONFIG_SYS_I2C_TEGRA /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index bc1904418d5..853cd528780 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_MMC_ENV_PART 1 /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index c7f174839f0..28383f49da6 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -191,7 +191,6 @@ #endif /* USB Host Support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_VF #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index b52f300af92..7535ad5a62d 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -291,7 +291,6 @@ /* * USB */ -#define CONFIG_USB_EHCI #define CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI_FSL diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index f42ba795eab..7e606cd794c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -608,7 +608,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/corvus.h b/include/configs/corvus.h index bb1d0d7715d..71b428f1f74 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -96,8 +96,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 /* USB DFU support */ diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index 904da1a8acc..435929723b3 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -426,7 +426,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index f3ff9e7494b..96a2df806a5 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -35,7 +35,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index e72cee0c000..5884d5c67c1 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -16,7 +16,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 /* diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 2b56945dd93..ab546c50cdb 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -85,7 +85,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI @@ -206,36 +205,6 @@ #define CONFIG_BOOTCOMMAND "run mtcb_start" /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 - -/* - * RTC configuration - */ -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_SYS_I2C_RTC_ADDR 0x56 -#define CONFIG_RTC_RV3029 -/* Enable 5k Ohm trickle charge resistor */ -#define CONFIG_SYS_RV3029_TCR 0x20 -#else -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */ -#endif - -/* * Flash configuration */ #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/draco.h b/include/configs/draco.h index 896d14f99a9..ba6a43062a6 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -45,9 +45,6 @@ #define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - /* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000 #define CONFIG_ENV_SIZE_REDUND 0x2000 diff --git a/include/configs/ds414.h b/include/configs/ds414.h index d1d4bf01564..2c83a716a38 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -74,8 +74,6 @@ #endif #if !defined(CONFIG_USB_XHCI_HCD) -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI #endif diff --git a/include/configs/duovero.h b/include/configs/duovero.h index 4bb81e5d9cb..f1422316891 100644 --- a/include/configs/duovero.h +++ b/include/configs/duovero.h @@ -25,8 +25,6 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h index b6a758f0b20..f88045436fa 100644 --- a/include/configs/e2220-1170.h +++ b/include/configs/e2220-1170.h @@ -33,7 +33,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h index 03cc74c5966..3d7a168bc4e 100644 --- a/include/configs/eco5pk.h +++ b/include/configs/eco5pk.h @@ -15,8 +15,6 @@ #include "tam3517-common.h" -#undef CONFIG_USB_EHCI -#undef CONFIG_USB_EHCI_OMAP #undef CONFIG_USB_OMAP3 /* Our console port is port3 */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index f7ac3027dd8..d1c7b937e36 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -171,8 +171,6 @@ * Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_MARVELL #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE #define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */ diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 68d48b2e6ae..749a9e3bc17 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 40c57948ccd..a0152a4a43e 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -116,9 +116,6 @@ #define CONFIG_SYS_DCACHE_OFF #endif -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - /* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0xB80000 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index aee9fea9da0..8e8cdf359b4 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -26,7 +26,6 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 776910c6cdd..198259b3c0d 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -68,8 +68,6 @@ /* USB Configs */ #ifdef CONFIG_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/gose.h b/include/configs/gose.h index 8956841fbe4..8a1d6d3407f 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -78,7 +78,6 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 3ec7649a1d4..f2260eae564 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -82,7 +82,6 @@ #define CONFIG_ENV_SIZE 0x4000 #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ARMADA100 #define CONFIG_EHCI_IS_TDI #endif /* CONFIG_CMD_USB */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 92eded6cdad..1c18a380fef 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -156,8 +156,6 @@ #define CONFIG_ARP_TIMEOUT 200UL /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 1a5d4b1dd5d..c17d7fad792 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -36,7 +36,6 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 6b6bbbd5c02..7ffc9d1dd98 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -165,7 +165,6 @@ #define CONFIG_TSEC2 #define CONFIG_TSEC_ENET #define CONFIG_HARD_SPI -#define CONFIG_HARD_I2C /* * NOR FLASH setup diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index aff4adf5d0d..ece72c6aa1d 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -150,29 +150,6 @@ #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - #define CONFIG_SYS_FLASH_BASE 0xFC000000 #define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index b31ba6a4ee5..89f6cbc85b9 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -34,7 +34,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 0d97317c7fb..4461623118e 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -127,25 +127,6 @@ #define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" #endif -#if 0 -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -#endif - /* * Flash configuration */ diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 85bc0e3fb77..343685a652d 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -24,13 +24,6 @@ #define CONFIG_SYS_PL310_BASE 0x48242000 /* - * Platform - */ - -#define CONFIG_OMAP -#define CONFIG_OMAP4430 - -/* * Board */ @@ -61,12 +54,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE) /* - * GPIO - */ - -#define CONFIG_OMAP_GPIO - -/* * I2C */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 1ca564f983d..2166e2c8f23 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -78,7 +78,6 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/lager.h b/include/configs/lager.h index b619d153c92..bf1352d941e 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -80,7 +80,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 22941068026..016d54f138c 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -137,8 +137,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 8d7e54305d2..2b3833d61b9 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -115,7 +115,6 @@ /*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 373de40d298..333bb266238 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -402,7 +402,6 @@ unsigned long get_board_ddr_clk(void); /*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 1ff3d9ee9e9..81f38a30a47 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -40,7 +40,6 @@ /*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 911192da7a1..6893bf24ff2 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -362,7 +362,6 @@ /* * USB/EHCI */ -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */ #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 #define CONFIG_EHCI_MMIO_BIG_ENDIAN diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index f6fa599e6bf..c4717238bb5 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -16,7 +16,6 @@ /* U-Boot Commands */ #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS @@ -63,11 +62,6 @@ #define CONFIG_FEC_MXC #endif -/* EEPROM */ -#ifdef CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#endif - /* RTC */ #ifdef CONFIG_CMD_DATE /* Use the internal RTC in the MXS chip */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index d85de5fa17f..c729e0938f1 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -162,7 +162,6 @@ * USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index db58f735bcd..8413c5c2346 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -102,8 +102,6 @@ * USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* USB device */ diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h new file mode 100644 index 00000000000..68874dc0290 --- /dev/null +++ b/include/configs/manroland/mpc5200-common.h @@ -0,0 +1,176 @@ +/* + * (C) Copyright 2009 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MANROLAND_MPC52XX__COMMON_H +#define __MANROLAND_MPC52XX__COMMON_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC5200 1 /* MPC5200 CPU */ + +/* ... running at 33.000000MHz */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\ + 230400 } + +#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */ +# define CONFIG_SYS_LOWBOOT 1 +#endif + +/* + * IPB Bus clocking configuration. + */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + +/* + * Flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xFF800000 + +#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ + +#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_CFI_AMD_RESET + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */ +#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */ + +/* Settings for XLB = 132 MHz */ +#define SDRAM_DDR 1 +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE +#else +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (192 << 10) +#define CONFIG_SYS_MALLOC_LEN (512 << 10) +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII 1 + +/*use Hardware WDT */ +#define CONFIG_HW_WATCHDOG + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Various low-level settings + */ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE + +/* 8Mbit SRAM @0x80100000 */ +#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ + +#define CONFIG_IDE_PREINIT 1 + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" +#define CONFIG_OF_IDE_FIXUP + +#endif /* __MANROLAND_MPC52XX__COMMON_H */ diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 9e5c29f92f2..4b9b5312bf8 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -98,8 +98,6 @@ "128k@0x19C0000(swupdate-kernel-dtb.nor)" /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mcx.h b/include/configs/mcx.h index e4f2a02dcf2..c70e68c5b0c 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -12,9 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP3_MCX /* working with mcx */ -#define CONFIG_OMAP_GPIO #define CONFIG_MACH_TYPE MACH_TYPE_MCX @@ -76,10 +73,6 @@ 115200} /* EHCI */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 1a9cb675dfb..fe94e663c5b 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -241,27 +241,12 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* slave address */ - /* * IIM - IC Identification Module */ #undef CONFIG_FSL_IIM /* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ -#define CONFIG_SYS_EEPROM_WREN /* Use EEPROM write protect */ - -/* * Ethernet configuration */ #define CONFIG_MPC512x_FEC 1 @@ -280,7 +265,7 @@ /* * Environment */ -#define CONFIG_ENV_IS_IN_EEPROM /* Store env in I2C EEPROM */ +#define CONFIG_ENV_IS_NOWHERE /* Store env in I2C EEPROM */ #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0x0000 /* environment starts here */ @@ -288,7 +273,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FUSE #undef CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index b9b666fd3e4..d2165828d36 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -29,7 +29,6 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 136db0dd260..cb5c346807b 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -34,7 +34,6 @@ * Command line configuration. */ #define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #define CONFIG_CMD_IMMAP #define CONFIG_CMD_JFFS2 @@ -256,21 +255,6 @@ #define CONFIG_SYS_ATA_STRIDE 4 /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* select I2C module #2 */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ - -/* * RTC configuration */ #define CONFIG_RTC_DS1337 1 @@ -284,12 +268,6 @@ #define LED_ON 0x00000010 /* - * Temperature sensor - */ -#define CONFIG_DTT_LM75 1 -#define CONFIG_DTT_SENSORS { 0x49 } - -/* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index dafb724e3fc..7919320c886 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -327,29 +327,12 @@ #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#if 0 -#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ -#endif - /* * IIM - IC Identification Module */ #undef CONFIG_FSL_IIM /* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ - -/* * Ethernet configuration */ #define CONFIG_MPC512x_FEC 1 @@ -369,7 +352,6 @@ */ #if defined(CONFIG_CMD_USB) -#define CONFIG_USB_EHCI /* Enable EHCI Support */ #define CONFIG_USB_EHCI_FSL /* On a FSL platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */ #define CONFIG_EHCI_DESC_BIG_ENDIAN @@ -396,7 +378,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h index dfebde20ecd..2e373175dc8 100644 --- a/include/configs/mt_ventoux.h +++ b/include/configs/mt_ventoux.h @@ -24,7 +24,6 @@ #define CONFIG_BOOTFILE "uImage" #define CONFIG_AUTO_COMPLETE -#define CONFIG_OMAP3_GPIO_4 #define CONFIG_HOSTNAME mt_ventoux /* diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 814f0dd7ca1..d000d7617a2 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -121,7 +121,6 @@ * Common USB/EHCI configuration */ #if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM) -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 79d92bb06ad..e60b96f7dc9 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -199,7 +199,6 @@ #define CONFIG_SYS_NAND_LARGEPAGE /* EHCI driver */ -#define CONFIG_USB_EHCI #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index dfd7ea9d453..54bc5634676 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -73,7 +73,6 @@ #define CONFIG_FEC_MXC_PHYADDR 0x1F /* USB Configs */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index 3094402d15a..151c4b3faff 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -45,7 +45,6 @@ #define CONFIG_FEC_MXC_PHYADDR 0x1F /* USB Configs */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 945be5835bf..1b6d868d044 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -42,7 +42,6 @@ #define CONFIG_FEC_MXC_PHYADDR 0x1F /* USB Configs */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 84fdf656cd6..b2cecc5d0eb 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -44,8 +44,6 @@ #define CONFIG_IMX_VIDEO_SKIP /* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 9f427355719..de5dc1c4517 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -128,8 +128,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index ef7675c6881..635c04acf9e 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -15,8 +15,6 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 598ab9aa2ee..a8c0e035829 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -63,8 +63,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 2fff7995eac..6ab76bb8fa1 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -159,8 +159,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 971f6c2f317..3e73dad9a3f 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -149,8 +149,6 @@ #define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index dafa946e478..b39ab729d8a 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -167,8 +167,6 @@ #define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 240d3a226c3..2c40decf499 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -186,8 +186,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/mxs.h b/include/configs/mxs.h index fdf596f82f0..041dcde38e7 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -126,16 +126,6 @@ #endif #endif -/* I2C */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXS -#define CONFIG_HARD_I2C -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 400000 -#endif -#endif - /* LCD */ #ifdef CONFIG_VIDEO #define CONFIG_VIDEO_MXS @@ -168,7 +158,6 @@ /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS #define CONFIG_EHCI_IS_TDI #endif diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 861cb5df57d..7004176c4ab 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -94,7 +94,6 @@ * USB/EHCI */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ #define CONFIG_EHCI_IS_TDI #define CONFIG_SUPPORT_VFAT diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index cacc1b81f07..13625286c5b 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -74,8 +74,6 @@ #define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index f51bfc34c1b..5e2d5991e76 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -22,10 +22,6 @@ /* * High Level Configuration Options */ - -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ -#define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 @@ -129,7 +125,6 @@ #define CONFIG_TWL4030_LED #define CONFIG_TWL4030_KEYPAD -#define CONFIG_OMAP_GPIO #define GPIO_SLIDE 71 /* diff --git a/include/configs/novena.h b/include/configs/novena.h index df0efbca92d..e0ed3045865 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -135,8 +135,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index d9d4f2d5837..b5357ea15c7 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -39,7 +39,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index e2881a7177b..1b4200bcbff 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -68,7 +68,6 @@ /* * Supported commands */ -#define CONFIG_CMD_EEPROM #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif @@ -173,27 +172,6 @@ #endif /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration: - * - * O2DNT board is equiped with Ramtron FRAM device FM24CL16 - * 16 Kib Ferroelectric Nonvolatile serial RAM memory - * organized as 2048 x 8 bits and addressable as eight I2C devices - * 0x50 ... 0x57 each 256 bytes in size - * - */ -#define CONFIG_SYS_I2C_FRAM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -/* * There is no write delay with FRAM, write operations are performed at bus * speed. Thus, no status polling or write delay is needed. */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 6cc7dd16a2f..afc7c5e35f2 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -188,7 +188,6 @@ #define CONFIG_LIB_HW_RAND /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 40b48f70abf..246fb808a96 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -41,7 +41,6 @@ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS /* DFU */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c69b32531cc..0d48d4ecc1c 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -55,9 +55,7 @@ #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* USB EHCI */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 @@ -66,10 +64,6 @@ #define CONFIG_USB_ETHER_MCS7830 #define CONFIG_USB_ETHER_SMSC95XX -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ - /* commands to include */ #define MTDIDS_DEFAULT "nand0=nand" diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index bf5b2f51396..d8ca6225d6e 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -83,13 +83,9 @@ /* * High level configuration options */ -#define CONFIG_OMAP /* This is TI OMAP core */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ -#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ - /* * Clock related definitions */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 70d337e6f16..59da726bd63 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -37,11 +37,6 @@ #endif #endif -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ - /* USB */ #define CONFIG_USB_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 772fc60c9c3..735c9ef08ab 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -49,10 +49,6 @@ /* Hardware drivers */ -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO 96..128 is in GPIO bank 4 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ - #define CONFIG_USB_OMAP3 /* commands to include */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index ebf7dd0c01f..111aec58d39 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -40,18 +40,9 @@ #define CONFIG_TWL4030_LED /* USB EHCI */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -/* Initialize GPIOs by default */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO Bank 2 */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64..95 is in GPIO Bank 3 */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO Bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */ - /* commands to include */ #ifdef CONFIG_NAND diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index ba7d3cdef5d..efee5b0c3f1 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -35,10 +35,6 @@ /* TWL4030 LED */ #define CONFIG_TWL4030_LED -/* Initialize GPIOs by default */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */ - /* * NS16550 Configuration */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index aa27a9e68a4..6c869c4c07b 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -13,11 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ - #define CONFIG_NAND #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #include <asm/arch/cpu.h> /* get chip and board defs */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index a6078daca6f..e1263b68bcf 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -17,8 +17,6 @@ */ /* USB UHH support options */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 533bb02c5e2..d8b0c023b94 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -52,8 +52,6 @@ #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 /* USB UHH support options */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET @@ -68,9 +66,6 @@ #define CONSOLEDEV "ttyO2" -/* Max time to hold reset on this board, see doc/README.omap-reset-time */ -#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 - #define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index b4d2b0a8715..34da90f20b6 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -55,8 +55,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index d995d0448c5..638e9da0283 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -823,9 +823,7 @@ #define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index dad0616517d..427629f409d 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -394,9 +394,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index 897add3dd05..b106439071c 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -33,7 +33,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 3cf0c87be43..22fc122cc30 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -33,7 +33,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 76fb7cec87a..974fd3f59f8 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -34,7 +34,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 2e8cbd94cf6..87a8557ea98 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -29,7 +29,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 6d8a2338a29..406f3e547ab 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -49,7 +49,6 @@ Serial console configuration /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PCI @@ -121,31 +120,6 @@ IPB Bus clocking configuration. #define CONFIG_SYS_XLB_PIPELINING 1 /*--------------------------------------------------------------------------- - I2C configuration ----------------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/*--------------------------------------------------------------------------- - EEPROM CAT24WC32 configuration ----------------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */ -#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_SIZE 2048 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 - -/*--------------------------------------------------------------------------- -RTC configuration ----------------------------------------------------------------------------*/ -#define RTC -#define CONFIG_RTC_PCF8563 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/*--------------------------------------------------------------------------- Flash configuration ---------------------------------------------------------------------------*/ @@ -172,11 +146,10 @@ RTC configuration Environment settings ---------------------------------------------------------------------------*/ -/* pcm030 ships with environment is EEPROM by default */ -#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ /*beginning of the EEPROM */ -#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE +#define CONFIG_ENV_SIZE 2048 #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 501611dde72..4bd8236b33c 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -302,34 +302,11 @@ #define CONFIG_SYS_PDM360NG_COPROC_BAUDRATE 38400 /* - * I2C - */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE -/* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* * IIM - IC Identification Module */ #undef CONFIG_FSL_IIM /* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM addr */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* ST AT24C01 */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-Byte Write Mode */ - -/* - * MAC addr in EEPROM - */ -#define CONFIG_SYS_I2C_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_MAC_OFFSET 0x10 -/* * Enabled only to delete "ethaddr" before testing * "ethaddr" setting from EEPROM */ @@ -345,12 +322,6 @@ #define CONFIG_HAS_ETH0 /* - * Configure on-board RTC - */ -#define CONFIG_RTC_M41T62 /* use M41T00 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* * Environment */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -367,7 +338,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_FUSE diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 26b1b1147cb..8d78f49c968 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -37,8 +37,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 733768aa7b2..998a7a344b2 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -98,8 +98,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/platinum.h b/include/configs/platinum.h index 6687c38c992..9c2182cbea3 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -52,8 +52,6 @@ #define CONFIG_PHYLIB /* USB config */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 911cad8cdd7..ff396eceb97 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -29,7 +29,6 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/porter.h b/include/configs/porter.h index fabab73680c..ac21411178e 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -82,7 +82,6 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 57f034f0df6..e8e0c7edd89 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -42,9 +42,6 @@ #define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - #ifndef CONFIG_SPL_BUILD /* Use common default */ diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 642572fc954..b159b1ed8d9 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -40,20 +40,6 @@ # define CONFIG_SMC911X_BASE (0x84000000) #endif -/* I2C */ -#define CONFIG_SH_SH7734_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_MODULE 0 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x50 -#define CONFIG_SH_I2C_DATA_HIGH 4 -#define CONFIG_SH_I2C_DATA_LOW 5 -#define CONFIG_SH_I2C_CLOCK 500000000 -#define CONFIG_SH_I2C_BASE0 0xFFC70000 -#define CONFIG_SH_I2C_BASE1 0xFFC7100 - /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 99fe1616e55..0820f6fc7a3 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -49,9 +49,6 @@ #define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - /* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000 #define CONFIG_ENV_SIZE_REDUND 0x2000 diff --git a/include/configs/rut.h b/include/configs/rut.h index 8cfb73d7813..e676a5acd48 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -110,10 +110,6 @@ #endif /* CONFIG_SPL_BUILD */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_HW_WATCHDOG -#endif - #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX #define CONFIG_SPLASH_SCREEN diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 398b3aa3439..33487cd86fe 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -97,16 +97,6 @@ #define CONFIG_PHY_MICREL #endif -#if 0 /* Disable until the I2C driver will be updated */ - -/* I2C Configs */ -#define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 -#endif - #if 0 /* Disable until the FLASH will be implemented */ #define CONFIG_SYS_USE_NAND #endif diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index 16bafc09907..7d20d65bf3b 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -66,8 +66,6 @@ #define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 207b59118d0..afc2c7dfe96 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index f5b03caf830..c39bb24420e 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -192,16 +192,13 @@ /* USB */ #ifdef CONFIG_440EPX - -#undef CONFIG_USB_EHCI /* OHCI by default */ - -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PPC4XX #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_EHCI_MMIO_BIG_ENDIAN #define CONFIG_EHCI_DESC_BIG_ENDIAN -#else /* CONFIG_USB_EHCI */ +#else /* CONFIG_USB_EHCI_HCD */ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 508b8494723..5bb471c8f60 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -15,7 +15,6 @@ #define __CONFIG_SIEMENS_AM33X_COMMON_H #define CONFIG_AM33XX -#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -548,13 +547,6 @@ #endif #endif -#define CONFIG_OMAP_GPIO - -/* Gpio cmd support */ - -/* Watchdog */ -#define CONFIG_HW_WATCHDOG - /* Reboot after 60 sec if bootcmd fails */ #define CONFIG_RESET_TO_RETRY #define CONFIG_BOOT_RETRY_TIME 60 diff --git a/include/configs/silk.h b/include/configs/silk.h index 4fc270fcc22..84108fd5235 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -82,7 +82,6 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 952c6f546fd..99b5b23d294 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -61,8 +61,6 @@ #define CONFIG_TFTP_TSIZE /* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 /* MMC */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 5214827ad93..c56169dcff8 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -19,12 +19,6 @@ #define CONFIG_ARM_ARCH_CP15_ERRATA /* - * Platform - */ - -#define CONFIG_OMAP - -/* * Board */ @@ -62,17 +56,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE) /* - * GPIO - */ - -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_3 -#define CONFIG_OMAP3_GPIO_4 -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_OMAP3_GPIO_6 - -/* * I2C */ diff --git a/include/configs/stout.h b/include/configs/stout.h index 90258c2f42e..16f3ce86474 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -84,7 +84,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 3dfd95ad77f..bd349694c64 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -12,7 +12,7 @@ * A10 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h index 1b7bfb6c22e..b7b67a1ddc0 100644 --- a/include/configs/sun50i.h +++ b/include/configs/sun50i.h @@ -11,7 +11,7 @@ * A64 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index ec8f3199ba3..0535d6a7f32 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -12,7 +12,7 @@ * High Level Configuration Options */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 6c1eca4d268..8b9adb1be66 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -15,7 +15,7 @@ * A31 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 5455901efe3..12c96230c27 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -13,7 +13,7 @@ * A20 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 6ac42acaead..47f28132407 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -13,7 +13,7 @@ * A23 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 0bdf52eb684..34ce122489a 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -13,8 +13,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -43,7 +41,6 @@ /* * DDR related */ -#define CONFIG_OMAP3_MICRON_DDR /* Micron DDR */ #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) /* @@ -69,9 +66,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} /* EHCI */ -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 9bb4a1a8c0c..ae6c768c229 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -16,9 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ - -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* Has an SDRC controller */ @@ -64,13 +61,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ - /* commands to include */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ @@ -238,8 +228,6 @@ */ /* USB EHCI */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index b4a14eae7c4..9720a09b323 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -93,8 +93,6 @@ /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 06d8720df2b..6406d396983 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -33,7 +33,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/tec.h b/include/configs/tec.h index b380a69bdf7..8ffdbec9d1e 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -29,7 +29,6 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index ab4136ab138..1a4a7e23205 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -123,9 +123,6 @@ #endif /* remove USB */ -#ifdef CONFIG_USB_EHCI -#undef CONFIG_USB_EHCI -#endif #ifdef CONFIG_USB_EHCI_TEGRA #undef CONFIG_USB_EHCI_TEGRA #endif diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 8c37d7cace8..cea84acd03c 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -42,9 +42,6 @@ #define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - /* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000 #define CONFIG_ENV_SIZE_REDUND 0x2000 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index baf818ba1a6..60322b1938a 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -18,7 +18,6 @@ #define CONFIG_TI81XX #define CONFIG_TI814X -#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -110,8 +109,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ -#define CONFIG_OMAP_GPIO - /** * Physical Memory Map */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index b7ec200e068..51b09d4b561 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -12,7 +12,6 @@ #define CONFIG_TI81XX #define CONFIG_TI816X -#define CONFIG_OMAP #define CONFIG_ARCH_CPU_INIT @@ -50,7 +49,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_CMD_ASKENV -#define CONFIG_OMAP_GPIO #define CONFIG_FS_FAT diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index e4c3c807f21..bf44121a0fe 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -47,10 +47,6 @@ */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 -/* Enable the HW watchdog, since we can use this with bootcount */ -#define CONFIG_HW_WATCHDOG -#define CONFIG_OMAP_WATCHDOG - /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h index de14b8575ad..b4565daf41c 100644 --- a/include/configs/ti_armv7_omap.h +++ b/include/configs/ti_armv7_omap.h @@ -12,9 +12,6 @@ #ifndef __CONFIG_TI_ARMV7_OMAP_H__ #define __CONFIG_TI_ARMV7_OMAP_H__ -/* Common defines for all OMAP architecture based SoCs */ -#define CONFIG_OMAP - /* I2C IP block */ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 @@ -23,9 +20,6 @@ /* SPI IP Block */ #define CONFIG_OMAP3_SPI -/* GPIO block */ -#define CONFIG_OMAP_GPIO - /* * GPMC NAND block. We support 1 device and the physical address to * access CS0 at is 0x8000000. diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index b85db500b57..1a6551e24d2 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -12,10 +12,6 @@ #ifndef __CONFIG_TI_OMAP4_COMMON_H #define __CONFIG_TI_OMAP4_COMMON_H -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP4430 1 /* which is in a 4430 */ #define CONFIG_MISC_INIT_R #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 2c05f9c9308..79e37e2cefb 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -50,8 +50,6 @@ #define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index e662e65204e..738693c0c00 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -81,8 +81,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 9741ca5fc99..8fe4165a77f 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -16,9 +16,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ - #define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM @@ -49,14 +46,6 @@ /* Hardware drivers */ -/* GPIO support */ -#define CONFIG_OMAP_GPIO - -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */ - -/* LED support */ - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 2c37107a3c0..ab9c5c3ab82 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -36,7 +36,6 @@ #define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/twister.h b/include/configs/twister.h index 30ad241f7ff..a7de75ec6ff 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -45,7 +45,4 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_SPL_BOARD_INIT -/* gpio 55 is used as SPL_OS_BOOT_KEY */ -#define CONFIG_OMAP3_GPIO_2 - #endif /* __CONFIG_H */ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 58b62d24489..f725b79cd4f 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 1 /* USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/v38b.h b/include/configs/v38b.h index cc0007827d4..0bc0ae517a2 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -135,27 +135,6 @@ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 - -/* - * RTC configuration - */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* * Flash configuration - use CFI driver */ #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 9db6fee6e78..b1dccdf666f 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -99,7 +99,6 @@ /* * USB/EHCI */ -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_VCT /* on VCT platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN #define CONFIG_EHCI_DESC_BIG_ENDIAN diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 9e83863c0a4..850a9bd49a4 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -34,7 +34,6 @@ #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 0e851a1b108..1ab6476f3cb 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index c146f773dbf..dc35b289d42 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -66,8 +66,6 @@ /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #endif diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 9a517a97389..78e14b38c11 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -76,8 +76,6 @@ #define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 47daf724ab6..3e0ea71e69a 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -50,8 +50,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/warp.h b/include/configs/warp.h index 5274b274a41..afe3eaed46d 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -58,8 +58,6 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 429e5b6a320..9f350d556a6 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA /* USB networking support */ diff --git a/include/configs/x600.h b/include/configs/x600.h index 6e52e562226..bf6fafce980 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -100,7 +100,6 @@ #define CONFIG_FPGA_COUNT 1 /* USB EHCI options */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SPEAR #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 653a30d3bd0..29be55a8400 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -134,7 +134,6 @@ /*----------------------------------------------------------------------- * USB configuration */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_PCI #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 2793a9bfb96..ad4247ab48b 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -332,7 +332,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/xpress.h b/include/configs/xpress.h index e3ae4e8f745..e13b792f386 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -64,8 +64,6 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ /* USB Configs */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index c61c353901f..c1daf656213 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -82,7 +82,6 @@ * USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MXC #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORT 1 diff --git a/include/i2c.h b/include/i2c.h index cd7f61e1c1e..a88cc7cddf9 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -706,9 +706,6 @@ void i2c_early_init_f(void); #endif void i2c_init(int speed, int slaveaddr); void i2c_init_board(void); -#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT -void i2c_board_late_init(void); -#endif #ifdef CONFIG_SYS_I2C /* diff --git a/include/spl.h b/include/spl.h index d1638e9d7cb..ffadce93c7b 100644 --- a/include/spl.h +++ b/include/spl.h @@ -267,4 +267,5 @@ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr); int spl_mmc_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); +void bl31_entry(void); #endif diff --git a/include/usb.h b/include/usb.h index 02a0ccdd77b..62f051fe535 100644 --- a/include/usb.h +++ b/include/usb.h @@ -187,7 +187,8 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); -#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_HOST || defined(CONFIG_DM_USB) +#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_MUSB_HOST \ + || defined(CONFIG_DM_USB) struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, int elementsize, void *buffer, int interval); int destroy_int_queue(struct usb_device *dev, struct int_queue *queue); |