summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-ppc/u-boot.h5
-rw-r--r--include/configs/SXNI855T.h26
-rw-r--r--include/configs/TQM8260.h24
3 files changed, 49 insertions, 6 deletions
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index e417e0d306..78744e28fd 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -68,7 +68,10 @@ typedef struct bd_info {
#if defined(CONFIG_HYMOD)
hymod_conf_t bi_hymod_conf; /* hymod configuration information */
#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_PN62) || defined(CONFIG_SVM_SC8xx)
+#if defined(CONFIG_EVB64260) || \
+ defined(CONFIG_PN62) || \
+ defined(CONFIG_SXNI855T) || \
+ defined(CONFIG_SVM_SC8xx)
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 8725f27c69..a7f0c21967 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -81,6 +81,32 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+/*-----------------------------------------------------------------------
+ * Definitions for status LED
+ */
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+
+# define STATUS_LED_PAR im_ioport.iop_papar
+# define STATUS_LED_DIR im_ioport.iop_padir
+# define STATUS_LED_ODR im_ioport.iop_paodr
+# define STATUS_LED_DAT im_ioport.iop_padat
+
+# define STATUS_LED_BIT 0x8000 /* LED 0 is on PA.0 */
+# define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+# define STATUS_LED_STATE STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+
+# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+#ifdef DEV /* development (debug) settings */
+#define CONFIG_BOOT_LED_STATE STATUS_LED_OFF
+#else /* production settings */
+#define CONFIG_BOOT_LED_STATE STATUS_LED_ON
+#endif
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
#define CONFIG_BOOTCOMMAND "bootm f8040000 f8100000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram ip=off"
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 9972312023..3dd671471a 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -69,11 +69,25 @@
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
- "bootm"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "bootfile=/tftpboot/TQM8260/uImage\0" \
+ "kernel_addr=40040000\0" \
+ "ramdisk_addr=40100000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */