diff options
Diffstat (limited to 'include')
79 files changed, 1800 insertions, 732 deletions
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index c18e4ca27a..62cb1eabc1 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -66,7 +66,6 @@ typedef struct bd_info { unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif - unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ diff --git a/include/common.h b/include/common.h index 5fb0bb2d3d..13e5dc74e6 100644 --- a/include/common.h +++ b/include/common.h @@ -729,9 +729,12 @@ void get_sys_info ( sys_info_t * ); #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) void cpu_init_f (volatile immap_t *immr); #endif -#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx) +#if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) void cpu_init_f (void); #endif +#ifdef CONFIG_MPC85xx +ulong cpu_init_f(void); +#endif int cpu_init_r (void); #if defined(CONFIG_MPC8260) @@ -820,12 +823,10 @@ char * strmhz(char *buf, unsigned long hz); #include <u-boot/crc.h> /* lib/rand.c */ -#if defined(CONFIG_LIB_RAND) || defined(CONFIG_LIB_HW_RAND) #define RAND_MAX -1U void srand(unsigned int seed); unsigned int rand(void); unsigned int rand_r(unsigned int *seedp); -#endif /* common/console.c */ int console_init_f(void); /* Before relocation; uses the serial stuff */ diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index e6fb47be0b..b304a4103d 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -71,6 +71,10 @@ #define CONFIG_LIB_RAND #endif +#if defined(CONFIG_API) && defined(CONFIG_LCD) +#define CONFIG_CMD_BMP +#endif + #ifndef CONFIG_SYS_PROMPT #define CONFIG_SYS_PROMPT "=> " #endif diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index df371b771d..1af9ba686d 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -7,6 +7,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* * B4860 QDS board configuration file */ @@ -115,6 +118,17 @@ #define IDT_SERDES1_ADDRESS 0x6E #define IDT_SERDES2_ADDRESS 0x6C +/* Voltage monitor on channel 2*/ +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +#define CONFIG_ZM7300 +#define I2C_MUX_CH_DPM 0xa +#define I2C_DPM_ADDR 0x28 + #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH @@ -547,15 +561,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -824,8 +838,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=b4860qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=b4860qds/b4860qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* For emulation this causes u-boot to jump to the start of the proof point app code automatically */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index e76a04b262..7bb5d33d0c 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -360,7 +360,7 @@ combinations. this should be removed later #endif /* Set up IFC registers for boot location NOR/NAND */ -#if defined(CONFIG_NAND) +#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index f15e1626f0..72f5fde16a 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -11,6 +11,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_36BIT diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 7b63945888..48ae9d4cae 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -11,6 +11,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_36BIT @@ -30,7 +33,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 7443acec80..a0d7d52627 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -16,6 +16,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* High Level Configuration Options */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 0f04067258..110ba5f325 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -20,39 +20,119 @@ #ifdef CONFIG_P1011RDB #define CONFIG_P1011 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P1020RDB #define CONFIG_P1020 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P2010RDB #define CONFIG_P2010 +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_P2020RDB #define CONFIG_P2020 -#endif - -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (129 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif +#endif + +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 4096 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif /* not CONFIG_TPL_BUILD */ + +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -64,8 +144,12 @@ #endif #ifndef CONFIG_SYS_MONITOR_BASE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif +#endif /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ @@ -120,22 +204,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x1fffffff #define CONFIG_PANIC_HANG /* do not reset board on panic */ - /* - * Config the L2 Cache as L2 SRAM - */ +/* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) +#if defined(CONFIG_P2020RDB) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) +#else +#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) +#endif +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif /* CONFIG_TPL_BUILD */ +#endif #endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#if defined(CONFIG_NAND_SPL) +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif @@ -146,7 +253,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR size on P1_P2 RDBs */ +#if defined(CONFIG_P1011RDB) || defined(CONFIG_P1020RDB) +/* + * P1020 and it's derivatives support max 32bit DDR width + * So Reduce available DDR size +*/ +#define CONFIG_SYS_SDRAM_SIZE 512 +#else +#define CONFIG_SYS_SDRAM_SIZE 1024 +#endif #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -201,14 +316,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ - defined(CONFIG_RAMBOOT_SPIFLASH) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else -#undef CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -241,21 +348,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE 0xff800000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull #else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#endif #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} @@ -264,15 +362,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - /* NAND flash config */ #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ @@ -288,7 +377,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND +#ifdef CONFIG_NAND #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ @@ -323,7 +412,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -490,33 +579,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_OFFSET ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_RAMBOOT_SDCARD) +#ifdef CONFIG_SPIFLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_IN_SPI_FLASH - #define CONFIG_ENV_SPI_BUS 0 - #define CONFIG_ENV_SPI_CS 0 - #define CONFIG_ENV_SPI_MAX_HZ 10000000 - #define CONFIG_ENV_SPI_MODE 0 - #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ - #define CONFIG_ENV_SECT_SIZE 0x10000 - #define CONFIG_ENV_SIZE 0x2000 -#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (512 * 0x800) +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#elif defined(CONFIG_SYS_RAMBOOT) +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif + #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 54e6493913..16f7525def 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -381,15 +381,15 @@ unsigned long get_board_sys_clk(unsigned long dummy); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -713,8 +713,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=p2041rdb/p2041rdb.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 522653bdc3..2215ac86ab 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -767,8 +767,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t1040qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t1040qds/t1040qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_LINUX \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 81b4f31bc6..e564cb7f53 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -779,8 +779,7 @@ "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \ "fdtaddr=c00000\0" \ "fdtfile=" __stringify(FDTFILE) "\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_LINUX \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 8bf08430be..8dd2e492ba 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -505,15 +505,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -837,8 +837,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t2080qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t2080qds/t2080qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 73d82edb80..3a1c49c811 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -461,15 +461,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -721,6 +721,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA #define CONFIG_CMD_MII #define CONFIG_CMD_I2C #define CONFIG_CMD_PING @@ -750,7 +751,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data @@ -797,8 +797,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t2080rdb/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t2080rdb/t2080rdb.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index ad5a9a6f0c..53c69b03db 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -128,8 +128,7 @@ "ramdiskfile=t4240emu/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t4240emu/t4240emu.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the proof point diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index e4eb30fbeb..a770dd0d3a 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -375,15 +375,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -572,8 +572,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t4240qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t4240qds/t4240qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h new file mode 100644 index 0000000000..183255d283 --- /dev/null +++ b/include/configs/T4240RDB.h @@ -0,0 +1,756 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T4240 RDB board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_T4240RDB +#define CONFIG_PHYS_64BIT + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg +#endif + +#define CONFIG_DDR_ECC + +#define CONFIG_CMD_REGINFO + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff40000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR3 + + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#ifdef CONFIG_SYS_NO_FLASH +#ifndef CONFIG_RAMBOOT_PBL +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1658) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_DDR_CLK_FREQ 133333333 + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x52 +#define SPD_EEPROM_ADDRESS2 0x54 +#define SPD_EEPROM_ADDRESS3 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ + | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_CORTINA +#define CONFIG_CORTINA_FW_ADDR 0xefe00000 +#define CONFIG_CORTINA_FW_LENGTH 0x40000 +#define CONFIG_PHY_TERANETICS +#define SGMII_PHY_ADDR1 0x0 +#define SGMII_PHY_ADDR2 0x1 +#define SGMII_PHY_ADDR3 0x2 +#define SGMII_PHY_ADDR4 0x3 +#define SGMII_PHY_ADDR5 0x4 +#define SGMII_PHY_ADDR6 0x5 +#define SGMII_PHY_ADDR7 0x6 +#define SGMII_PHY_ADDR8 0x7 +#define FM1_10GEC1_PHY_ADDR 0x10 +#define FM1_10GEC2_PHY_ADDR 0x11 +#define FM2_10GEC1_PHY_ADDR 0x12 +#define FM2_10GEC2_PHY_ADDR 0x13 +#define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR +#define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR +#define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR +#define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR +#endif + + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define __USB_PHY_TYPE utmi + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240rdb/t4240rdb.dtb\0" \ + "bdev=sda3\0" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#include <asm/fsl_secure_boot.h> + +#ifdef CONFIG_SECURE_BOOT +/* Secure Boot target was not getting build for T4240 because of + * increased binary size. So the size is being reduced by removing USB + * which is anyways not used in Secure Environment. + */ +#undef CONFIG_CMD_USB +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 670e3f19e3..762f6d2e4b 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -61,11 +61,8 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "fdt_high=0xffffffff\0" \ + DEFAULT_LINUX_BOOT_ENV \ "boot_fdt=try\0" \ - "rdaddr=0x81000000\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ @@ -82,7 +79,7 @@ "nfsopts=nolock\0" \ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ "::off\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramroot=/dev/ram0 rw\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ @@ -216,14 +213,6 @@ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -/* SPI flash. */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 - #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #ifdef CONFIG_NAND @@ -367,6 +356,15 @@ * 0x442000 - 0x800000 : Userland */ #if defined(CONFIG_SPI_BOOT) +/* SPL related */ +#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED @@ -442,7 +440,6 @@ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Reduce SPL size by removing unlikey targets */ -#undef CONFIG_SPL_SPI_SUPPORT #ifdef CONFIG_NOR_BOOT #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 614857dd25..d5e6c4b0dc 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -35,6 +35,8 @@ /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ + (128 << 20)) #define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ @@ -96,14 +98,6 @@ #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 -/* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 - /* Enhance our eMMC support / experience. */ #define CONFIG_CMD_GPT #define CONFIG_EFI_PARTITION @@ -112,10 +106,7 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "fdt_high=0xffffffff\0" \ - "rdaddr=0x81000000\0" \ + DEFAULT_LINUX_BOOT_ENV \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ @@ -131,7 +122,7 @@ "usbroot=/dev/sda2 rw\0" \ "usbrootfstype=ext4 rootwait\0" \ "usbdev=0\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramroot=/dev/ram0 rw\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 06f095cc41..c1eda96385 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -75,6 +75,7 @@ #define CONFIG_ROOTPATH "/romfs/brettl2" /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ +#define CONFIG_LIB_RAND #endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9eb85ebf3d..9e374c4024 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -89,7 +89,7 @@ #define CONFIG_PHY_ADDR 3 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 3065d22f0b..972eca9c17 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -87,7 +87,7 @@ #define CONFIG_HOSTNAME bf526-ezbrd /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 748ddb3b15..92c183e27c 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -85,7 +85,7 @@ #define CONFIG_HOSTNAME bf527-ezkit /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 156eeabb06..3bc364ccfd 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -89,6 +89,7 @@ /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 3aa3d50a89..ba74a695f8 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -67,7 +67,7 @@ #define CONFIG_HOSTNAME bf537-pnav /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:24:21:18 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index e12d761a24..0b723cf934 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -88,7 +88,7 @@ #define CONFIG_ROOTPATH "/romfs" /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index e1705cadae..a302f839a1 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -67,7 +67,7 @@ #define CONFIG_HOSTNAME bf537-stamp /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 8182a7577b..d1a8ff2a82 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -57,10 +57,10 @@ #define CONFIG_RESET_PHY_R /* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ /* NAND: socketed, two chipselects, normally 2 GBytes */ #define CONFIG_NAND_DAVINCI diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 384d8715ad..8d3ae49913 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -85,7 +85,7 @@ #define CONFIG_HOSTNAME cm-bf527 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 67cf801a3f..47967d7120 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -73,7 +73,7 @@ #define CONFIG_HOSTNAME cm-bf537e /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 34ce75baeb..88c99821b1 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -71,7 +71,7 @@ #define CONFIG_HOSTNAME cm-bf537u /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index db6b9be73c..12b32967b4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_RAMBOOT_PBL @@ -376,15 +379,15 @@ * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -712,8 +715,7 @@ "ramdiskfile=p4080ds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=p4080ds/p4080ds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index c4cc62ecb4..27171950a6 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -55,10 +55,10 @@ /* * I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /* * I2C EEPROM definitions for catalyst 24W256 EEPROM chip diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 509fe20d2c..860a11dd2b 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -166,10 +166,10 @@ /* * I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 25000 -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ #define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 /* diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 6382e75b95..c2e187e3de 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -41,10 +41,10 @@ #define DM9000_DATA (CONFIG_DM9000_BASE + 2) /* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ /* NAND: socketed, two chipselects, normally 2 GBytes */ #define CONFIG_NAND_DAVINCI diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 234bbc0996..5188fdf878 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -40,10 +40,10 @@ #define DM9000_DATA (CONFIG_DM9000_BASE + 16) /* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x10 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* NAND */ #define CONFIG_NAND_DAVINCI diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index b547289d2d..c4fccfd39a 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -49,10 +49,10 @@ #define CONFIG_NET_RETRY_COUNT 10 /* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ /* NAND: socketed, two chipselects, normally 2 GBytes */ #define CONFIG_NAND_DAVINCI diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 2132342eb7..8a3c453347 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -60,10 +60,10 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_BAUDRATE 115200 /* I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 -#define CONFIG_SYS_I2C_SLAVE 10 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index d8fa64600a..9b3d0febc0 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -77,10 +77,10 @@ /*===================*/ /* I2C Configuration */ /*===================*/ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /*==================================*/ /* Network & Ethernet Configuration */ /*==================================*/ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index f9a0a76d36..96c8fe2a4d 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -46,10 +46,10 @@ /*===================*/ /* I2C Configuration */ /*===================*/ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /*==================================*/ /* Network & Ethernet Configuration */ /*==================================*/ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 44449df9cd..6e07cce766 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -42,10 +42,10 @@ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ /* I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index ac543f8d94..cd23aaca20 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -78,10 +78,10 @@ /*===================*/ /* I2C Configuration */ /*===================*/ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /*==================================*/ /* Network & Ethernet Configuration */ /*==================================*/ diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index 4f2c742a5d..3f1f9f3846 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -55,6 +55,8 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING + +#define CONFIG_LIB_RAND #endif /* diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 291c538a34..8d0a0eb8bc 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -14,12 +14,15 @@ #define CONFIG_DRA7XX +#ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_SIZE (128 << 10) #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#endif #define CONFIG_CMD_SAVEENV #if (CONFIG_CONS_INDEX == 1) @@ -75,13 +78,46 @@ #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 +/* + * Default to using SPI for environment, etc. + * 0x000000 - 0x010000 : QSPI.SPL (64KiB) + * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB) + * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB) + * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB) + * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) + * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) + * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) + * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) + * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) + * 0x9E0000 - 0x2000000 : USERLAND + */ +#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 +#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 +#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 +#if defined(CONFIG_QSPI_BOOT) +/* In SPL, use the environment and discard MMC support for space. */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_SPL_MMC_SUPPORT +#undef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */ +#endif +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ +#define CONFIG_ENV_OFFSET 0x1C0000 +#define CONFIG_ENV_OFFSET_REDUND 0x1D0000 +#endif + /* SPI SPL */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 58e40ed888..1d50a37d2f 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -78,9 +78,10 @@ /* * I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ /* * Network & Ethernet Configuration diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 03b74a2dab..30ca95f02d 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -73,10 +73,10 @@ /* * I2C Configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CONFIG_SYS_I2C_SPEED 80000 -#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ #define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 #define CONFIG_CMD_I2C diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 7dbee3cdb9..a6202cfab4 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -7,15 +7,15 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <config_distro_defaults.h> + #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH -#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP #define CONFIG_FIT -#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SYS_BOOTMAPSZ (16 << 20) #define CONFIG_SYS_TIMER_RATE (150000000/256) @@ -48,35 +48,18 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - #define CONFIG_CALXEDA_XGMAC -/* PXE support */ -#define CONFIG_BOOTP_PXE -#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" - /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF #define CONFIG_CMD_MEMORY #define CONFIG_CMD_LOADS #define CONFIG_CMD_SCSI -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PXE -#define CONFIG_MENU -#define CONFIG_BOOTDELAY 2 #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY #define CONFIG_AUTOBOOT_KEYED @@ -85,14 +68,9 @@ /* * Miscellaneous configurable options */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PROMPT "Highbank #" -#define CONFIG_SYS_HUSH_PARSER /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 613f7e1a2e..c1b3b633e9 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -474,7 +474,6 @@ #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo" #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_HZ 1000 /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 0efa2b7b9f..3767502faa 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -77,6 +77,7 @@ #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 2) +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h new file mode 100644 index 0000000000..6255750c3b --- /dev/null +++ b/include/configs/jetson-tk1.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2013-2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/sizes.h> + +#include "tegra124-common.h" + +/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra124-jetson-tk1 +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra124 (Jetson TK1) # " +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTD +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_SYS_I2C_TEGRA +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 + +/* SPI */ +#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ +#define CONFIG_TEGRA114_SPI_CTRLS 6 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h new file mode 100644 index 0000000000..9bb8f342b6 --- /dev/null +++ b/include/configs/k2hk_evm.h @@ -0,0 +1,256 @@ +/* + * Configuration header file for TI's k2hk-evm + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_K2HK_EVM_H +#define __CONFIG_K2HK_EVM_H + +/* Platform type */ +#define CONFIG_SOC_K2HK +#define CONFIG_K2HK_EVM + +/* U-Boot Build Configuration */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_THUMB_BUILD + +/* SoC Configuration */ +#define CONFIG_ARMV7 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0x0c001000 +#define CONFIG_SPL_TARGET "u-boot-spi.gph" +#define CONFIG_SYS_DCACHE_OFF + +/* Memory Configuration */ +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 +#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ +#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ + GENERATED_GBL_DATA_SIZE) + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c200000 +#define CONFIG_SPL_PAD_TO 65536 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) +#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ + CONFIG_SPL_MAX_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) +#define CONFIG_SPL_STACK_SIZE (8 * 1024) +#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ + CONFIG_SYS_SPL_MALLOC_SIZE + \ + CONFIG_SPL_STACK_SIZE - 4) +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SPL_FRAMEWORK + +/* UART Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_MEM32 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* SPI Configuration */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI0 +#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE +#define CONFIG_SYS_SPI0_NUM_CS 4 +#define CONFIG_SYS_SPI1 +#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE +#define CONFIG_SYS_SPI1_NUM_CS 4 +#define CONFIG_SYS_SPI2 +#define CONFIG_SYS_SPI2_NUM_CS 4 +#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE +#define CONFIG_CMD_SPI +#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* I2C Configuration */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ +#define I2C_BUS_MAX 3 + +/* EEPROM definitions */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_ENV_EEPROM_IS_ON_I2C + +/* Network Configuration */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 32 +#define CONFIG_NET_MULTI +#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 +#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 +#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 +#define CONFIG_SYS_SGMII_RATESCALE 2 + +/* NAND Configuration */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro," \ + "-(ubifs)" +/* U-Boot command configuration */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_SF +#define CONFIG_CMD_EEPROM + +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2HK EVM # " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE 2048 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "boot=ramfs\0" \ + "tftp_root=/\0" \ + "nfs_root=/export\0" \ + "mem_lpae=1\0" \ + "mem_reserve=512M\0" \ + "addr_fdt=0x87000000\0" \ + "addr_kern=0x88000000\0" \ + "addr_mon=0x0c5f0000\0" \ + "addr_uboot=0x87000000\0" \ + "addr_fs=0x82000000\0" \ + "addr_ubi=0x82000000\0" \ + "fdt_high=0xffffffff\0" \ + "name_fdt=uImage-k2hk-evm.dtb\0" \ + "name_fs=arago-console-image.cpio.gz\0" \ + "name_kern=uImage-keystone-evm.bin\0" \ + "name_mon=skern-keystone-evm.bin\0" \ + "name_uboot=u-boot-spi-keystone-evm.gph\0" \ + "name_ubi=keystone-evm-ubifs.ubi\0" \ + "run_mon=mon_install ${addr_mon}\0" \ + "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ + "init_net=run args_all args_net\0" \ + "init_ubi=run args_all args_ubi; " \ + "ubi part ubifs; ubifsmount boot\0" \ + "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ + "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ + "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ + "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ + "burn_uboot=sf probe; sf erase 0 0x100000; " \ + "sf write ${addr_uboot} 0 ${filesize}\0" \ + "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ + "${nfs_options} ip=dhcp\0" \ + "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ + "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ + "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ + "burn_ubi=nand erase.part ubifs; " \ + "nand write ${addr_ubi} ubifs ${filesize}\0" \ + "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ + "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \ + "rdinit=/sbin/init rw root=/dev/ram0 " \ + "initrd=0x802000000,9M\0" \ + "no_post=1\0" \ + "mtdparts=mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0" +#define CONFIG_BOOTCOMMAND \ + "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ + "get_kern_${boot} run_mon run_kern" +#define CONFIG_BOOTARGS \ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_SYS_BARGSIZE 1024 +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) + +#define CONFIG_SUPPORT_RAW_INITRD + +/* we may include files below only after all above definitions */ +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6) + +#endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 418e3d1298..efd96352ec 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -85,11 +85,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */ /* * Config the L3 Cache as L3 SRAM @@ -143,10 +139,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_PNVRAM 0x80000 /* physical RAM MTD size [hex] */ #define CONFIG_KM_PHRAM 0x100000 -/* resereved pram area at the end of memroy [hex] */ -#define CONFIG_KM_RESERVED_PRAM 0x0 -/* enable protected RAM */ -#define CONFIG_PRAM 0 +/* reserved pram area at the end of memory [hex] + * u-boot reserves some memory for the MP boot page */ +#define CONFIG_KM_RESERVED_PRAM 0x1000 +/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable + * is not valid yet, which is the case for when u-boot copies itself to RAM */ +#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) #define CONFIG_KM_CRAMFS_ADDR 0x2000000 #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ @@ -383,6 +381,7 @@ int get_scl(void); */ #define CONFIG_CMD_PCI #define CONFIG_CMD_NET +#define CONFIG_CMD_ERRATA /* we don't need flash support */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index be39b7c0a0..a5b7a400cd 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -12,19 +12,22 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ + /* - * High Level Configuration Options + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. We use this rather than the inherited defines from + * ti_armv7_common.h for backwards compatibility. */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON - -#define CONFIG_SDRC /* The chip has SDRC controller */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap3.h> +#include <configs/ti_omap3_common.h> /* * Display CPU and Board information @@ -32,57 +35,10 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - #define CONFIG_MISC_INIT_R -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ - -/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 /* Status LED */ #define CONFIG_STATUS_LED 1 @@ -144,44 +100,23 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_FS_GENERIC /* Generic FS support */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ + #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ "1920k(u-boot),128k(u-boot-env),"\ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_USB_STORAGE /* USB storage support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_LED /* LED support */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ -#define CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_SETEXPR /* Evaluate expressions */ #define CONFIG_CMD_GPIO /* Enable gpio command */ -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_VIDEO_OMAP3 /* DSS Support */ /* * TWL4030 */ -#define CONFIG_TWL4030_POWER 1 #define CONFIG_TWL4030_LED 1 /* @@ -189,17 +124,9 @@ */ #define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -/* Environment information */ -#define CONFIG_BOOTDELAY 3 - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "rdaddr=0x81000000\0" \ @@ -320,46 +247,14 @@ "run mmcbootz; " \ "fi; " \ -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # " -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_ALT_MEMTEST 1 -#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */ - /* defaults */ -#define CONFIG_SYS_MEMTEST_END (0x87FFFFFF) /* 128MB */ -#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ - /* load address */ - /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). * This rate is divided by a local divisor. */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -369,8 +264,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - #if defined(CONFIG_CMD_NAND) #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE #endif @@ -380,6 +273,7 @@ #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ @@ -387,49 +281,12 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - #define CONFIG_OMAP3_SPI #define CONFIG_SYS_CACHELINE_SIZE 64 /* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE @@ -443,17 +300,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index f0fa96efcb..7c5540ff66 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -16,15 +16,22 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ -#define CONFIG_OMAP_COMMON - -#define CONFIG_SDRC /* The chip has SDRC controller */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_NAND +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +#include <configs/ti_omap3_common.h> + +/* Remove SPL boot option - we do not support that on LDP yet */ +#undef CONFIG_SPL +#undef CONFIG_SPL_FRAMEWORK +#undef CONFIG_SPL_OS_BOOT + +/* Generic NAND definition conflicts with debug_base */ +#undef CONFIG_SYS_NAND_BASE /* * Display CPU and Board information @@ -32,57 +39,16 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - #define CONFIG_MISC_INIT_R -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 -#define CONFIG_OF_LIBFDT 1 - -/* - * Size of malloc() pool - */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* * Hardware drivers */ -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -98,63 +64,52 @@ #define CONFIG_USBD_MANUFACTURER "Texas Instruments" #define CONFIG_USBD_PRODUCT_NAME "Zoom1" -/* commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ + "1920k(u-boot),128k(u-boot-env),"\ + "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ +#if defined(CONFIG_CMD_NAND) #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ +#endif #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ -#undef CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#undef CONFIG_SYS_I2C_OMAP24XX #define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 */ -#define CONFIG_TWL4030_POWER 1 #define CONFIG_TWL4030_LED 1 /* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ + "fdtaddr=0x80f80000\0" \ + "bootfile=uImage\0" \ + "fdtfile=omap3-ldp.dtb\0" \ + "bootdir=/\0" \ + "bootpart=0:1\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mmcdev=0\0" \ "videomode=1024x768@60,vxres=1024,vyres=768\0" \ "videospec=omapfb:vram:2M,vram:4M\0" \ @@ -169,10 +124,15 @@ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ + "mmczboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ "nand read ${loadaddr} 280000 400000; " \ @@ -183,57 +143,22 @@ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ + "if run loadimage; then " \ "run mmcboot; " \ + "else if run loadzimage; then " \ + "run mmczboot; " \ "else run nandboot; " \ - "fi; " \ + "fi; fi;" \ "fi; " \ "else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1 /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ - /* works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) /* memtest */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_2 + \ 0x01F00000) /* 31MB */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ - /* load address */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -244,8 +169,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - #if defined(CONFIG_CMD_NAND) #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE #endif @@ -264,4 +187,12 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 +#ifdef CONFIG_CMD_NET +/* Ethernet (LAN9211 from SMSC9118 family) */ +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE DEBUG_BASE + +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 783b7c3e32..7e2ecd53f5 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -26,6 +26,7 @@ /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_SIZE (128 << 10) #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index e745945ba7..185df775aa 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #ifdef CONFIG_36BIT #define CONFIG_PHYS_64BIT #endif @@ -883,6 +886,10 @@ #endif #endif +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#endif + #define CONFIG_MMC #ifdef CONFIG_MMC diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 10e014d33c..763a47ac3d 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -19,6 +19,7 @@ #undef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_MPC85XX_NO_RESETVEC diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 91cc7d8e58..41c946d1ec 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -17,7 +17,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index fa62cb6cd5..6bb2546eda 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -140,8 +140,6 @@ #define CONFIG_CROS_EC #define CONFIG_CMD_CROS_EC #define CONFIG_CROS_EC_SANDBOX -#define CONFIG_KEYBOARD -#define CONFIG_CROS_EC_KEYB #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -149,7 +147,12 @@ #define CONFIG_SOUND_SANDBOX #define CONFIG_CMD_SOUND +#ifndef SANDBOX_NO_SDL #define CONFIG_SANDBOX_SDL +#endif + +/* LCD and keyboard require SDL support */ +#ifdef CONFIG_SANDBOX_SDL #define CONFIG_LCD #define CONFIG_VIDEO_SANDBOX_SDL #define CONFIG_CMD_BMP @@ -158,9 +161,18 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define LCD_BPP LCD_COLOR16 +#define CONFIG_CROS_EC_KEYB +#define CONFIG_KEYBOARD + #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" +#else + +#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" +#endif #define CONFIG_GZIP_COMPRESSED #define CONFIG_BZIP2 diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 36bc5294ef..75609b9f61 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -10,6 +10,8 @@ #ifndef __T4QDS_H #define __T4QDS_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 1ff34d517d..a77ba697d0 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -68,7 +68,7 @@ #define CONFIG_HOSTNAME tcm-bf518 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 370d97ffe0..c4c1c579bc 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -73,7 +73,7 @@ #define CONFIG_HOSTNAME tcm-bf537 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 50c32037ff..128b66edef 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -61,6 +61,8 @@ */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ + (128 << 20)) /* Enable the watchdog inside of SPL */ #define CONFIG_SPL_WATCHDOG_SUPPORT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 69d69a5421..485427276a 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -20,6 +20,7 @@ /* Common define for many platforms. */ #define CONFIG_OMAP #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD /* * We typically do not contain NOR flash. In the cases where we do, we @@ -36,8 +37,28 @@ /* * Our DDR memory always starts at 0x80000000 and U-Boot shall have * relocated itself to higher in memory by the time this value is used. + * However, set this to a 32MB offset to allow for easier Linux kernel + * booting as the default is often used as the kernel load address. */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +/* + * We setup defaults based on constraints from the Linux kernel, which should + * also be safe elsewhere. We have the default load at 32MB into DDR (for + * the kernel), FDT above 128MB (the maximum location for the end of the + * kernel), and the ramdisk 512KB above that (allowing for hopefully never + * seen large trees). We say all of this must be within the first 256MB + * as that will normally be within the kernel lowmem and thus visible via + * bootm_size and we only run on platforms with 256MB or more of memory. + */ +#define DEFAULT_LINUX_BOOT_ENV \ + "loadaddr=0x82000000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdtaddr=0x88000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "rdaddr=0x88080000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + "bootm_size=0x10000000\0" /* * Default to a quick boot delay. @@ -90,7 +111,9 @@ */ #ifdef CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC +#ifndef CONFIG_SYS_NAND_BASE #define CONFIG_SYS_NAND_BASE 0x8000000 +#endif #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_CMD_NAND #endif @@ -188,12 +211,18 @@ * We have the SPL malloc pool at the end of the BSS area. */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 +#endif +#ifndef CONFIG_SPL_BSS_START_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80a00000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ +#endif +#ifndef CONFIG_SYS_SPL_MALLOC_START #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN +#endif /* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ @@ -204,8 +233,6 @@ #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 - /* FAT */ #define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" #define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" @@ -245,6 +272,7 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 854cb78882..ade35d295a 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -61,10 +61,14 @@ #define CONFIG_SPL_MAX_SIZE (54 * 1024) #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ + (64 << 20)) + #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SYS_NAND_BASE 0x30000000 #endif /* Now bring in the rest of the common code. */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index bcb5eabd75..77fbfb6410 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -87,10 +87,8 @@ * Environment setup */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ + DEFAULT_LINUX_BOOT_ENV \ "console=ttyO2,115200n8\0" \ - "fdt_high=0xffffffff\0" \ - "fdtaddr=0x80f80000\0" \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ @@ -158,6 +156,8 @@ #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ + (128 << 20)) #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 7b10fbd28a..a582fa4041 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -46,8 +46,6 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap.h> -#define CONFIG_ENV_SIZE (128 << 10) - #include <configs/ti_armv7_common.h> /* @@ -70,10 +68,7 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "fdt_high=0xffffffff\0" \ - "rdaddr=0x81000000\0" \ + DEFAULT_LINUX_BOOT_ENV \ "console=" CONSOLEDEV ",115200n8\0" \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ @@ -145,6 +140,8 @@ #define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ + (128 << 20)) #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ diff --git a/include/ext4fs.h b/include/ext4fs.h index aacb147de2..fbbb002b16 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -133,6 +133,7 @@ int ext4fs_open(const char *filename); int ext4fs_read(char *buf, unsigned len); int ext4fs_mount(unsigned part_length); void ext4fs_close(void); +void ext4fs_reinit_global(void); int ext4fs_ls(const char *dirname); int ext4fs_exists(const char *filename); void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); diff --git a/include/fat.h b/include/fat.h index c8eb7ccd29..81d9790420 100644 --- a/include/fat.h +++ b/include/fat.h @@ -84,8 +84,13 @@ #define START(dent) (FAT2CPU16((dent)->start) \ + (mydata->fatsize != 32 ? 0 : \ (FAT2CPU16((dent)->starthi) << 16))) +#define IS_LAST_CLUST(x, fatsize) ((x) >= ((fatsize) != 32 ? \ + ((fatsize) != 16 ? 0xff8 : 0xfff8) : \ + 0xffffff8)) #define CHECK_CLUST(x, fatsize) ((x) <= 1 || \ - (x) >= ((fatsize) != 32 ? 0xfff0 : 0xffffff0)) + (x) >= ((fatsize) != 32 ? \ + ((fatsize) != 16 ? 0xff0 : 0xfff0) : \ + 0xffffff0)) typedef struct boot_sector { __u8 ignored[3]; /* Bootstrap code */ diff --git a/include/fdt_support.h b/include/fdt_support.h index b77a0f1f89..ae010bb624 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -65,6 +65,13 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif void ft_board_setup(void *blob, bd_t *bd); +/* + * The keystone2 SOC requires all 32 bit aliased addresses to be converted + * to their 36 physical format. This has to happen after all fdt nodes + * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex() + * called at the end of the image_setup_libfdt() is to do that convertion. + */ +void ft_board_setup_ex(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); diff --git a/include/image.h b/include/image.h index e1f92979a4..18861686cc 100644 --- a/include/image.h +++ b/include/image.h @@ -224,6 +224,7 @@ struct lmb; #define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image, can run from any load address */ #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ +#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ /* * Compression Types diff --git a/include/net.h b/include/net.h index 0802fad876..735b0b9d26 100644 --- a/include/net.h +++ b/include/net.h @@ -130,23 +130,6 @@ extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr); extern int eth_getenv_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); -#ifdef CONFIG_RANDOM_MACADDR -/* - * The u-boot policy does not allow hardcoded ethernet addresses. Under the - * following circumstances a random generated address is allowed: - * - in emergency cases, where you need a working network connection to set - * the ethernet address. - * Eg. you want a rescue boot and don't have a serial port to access the - * CLI to set environment variables. - * - * In these cases, we generate a random locally administered ethernet address. - * - * Args: - * enetaddr - returns 6 byte hardware address - */ -extern void eth_random_enetaddr(uchar *enetaddr); -#endif - extern int usb_eth_initialize(bd_t *bi); extern int eth_init(bd_t *bis); /* Initialize the device */ extern int eth_send(void *packet, int length); /* Send a packet */ @@ -674,6 +657,25 @@ static inline int is_valid_ether_addr(const u8 *addr) return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr); } +/** + * eth_random_addr - Generate software assigned random Ethernet address + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Generate a random Ethernet address (MAC) that is not multicast + * and has the local assigned bit set. + */ +static inline void eth_random_addr(uchar *addr) +{ + int i; + unsigned int seed = get_timer(0); + + for (i = 0; i < 6; i++) + addr[i] = rand_r(&seed); + + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + /* Convert an IP address to a string */ extern void ip_to_string(IPaddr_t x, char *s); diff --git a/include/ns16550.h b/include/ns16550.h index 51cb5b4a66..17f829f6f9 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -100,6 +100,7 @@ typedef struct NS16550 *NS16550_t; #define UART_MCR_OUT1 0x04 /* Out 1 */ #define UART_MCR_OUT2 0x08 /* Out 2 */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS */ #define UART_MCR_DMA_EN 0x04 #define UART_MCR_TX_DFR 0x08 diff --git a/include/spartan2.h b/include/spartan2.h index 087a27d3cc..2aca954e73 100644 --- a/include/spartan2.h +++ b/include/spartan2.h @@ -10,37 +10,35 @@ #include <xilinx.h> -extern int Spartan2_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Spartan2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Spartan2_info(Xilinx_desc *desc); - /* Slave Parallel Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Spartan2_Slave_Parallel_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_spartan2_slave_parallel_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_init_fn init; - Xilinx_done_fn done; - Xilinx_wr_fn wr; - Xilinx_post_fn post; -} Xilinx_Spartan2_Slave_Serial_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_init_fn init; + xilinx_done_fn done; + xilinx_wr_fn wr; + xilinx_post_fn post; +} xilinx_spartan2_slave_serial_fns; + +extern struct xilinx_fpga_op spartan2_op; /* Device Image Sizes *********************************************************************/ @@ -63,36 +61,36 @@ typedef struct { *********************************************************************/ /* Spartan-II devices */ #define XILINX_XC2S15_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S30_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S50_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S100_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S150_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S200_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S100E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S150E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S200E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S300E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie, &spartan2_op } #endif /* _SPARTAN2_H_ */ diff --git a/include/spartan3.h b/include/spartan3.h index 72e7c0ddd0..d6d67a6e56 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -10,39 +10,37 @@ #include <xilinx.h> -extern int Spartan3_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Spartan3_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Spartan3_info(Xilinx_desc *desc); - /* Slave Parallel Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Spartan3_Slave_Parallel_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_spartan3_slave_parallel_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_init_fn init; - Xilinx_done_fn done; - Xilinx_wr_fn wr; - Xilinx_post_fn post; - Xilinx_bwr_fn bwr; /* block write function */ - Xilinx_abort_fn abort; -} Xilinx_Spartan3_Slave_Serial_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_init_fn init; + xilinx_done_fn done; + xilinx_wr_fn wr; + xilinx_post_fn post; + xilinx_bwr_fn bwr; /* block write function */ + xilinx_abort_fn abort; +} xilinx_spartan3_slave_serial_fns; + +extern struct xilinx_fpga_op spartan3_op; /* Device Image Sizes *********************************************************************/ @@ -73,46 +71,48 @@ typedef struct { *********************************************************************/ /* Spartan-III devices */ #define XILINX_XC3S50_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S200_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S400_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S2000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S4000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S5000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie, &spartan3_op } /* Spartan-3E devices */ #define XILINX_XC3S100E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S250E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S500E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie, \ + &spartan3_op } #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie, \ + &spartan3_op } #define XILINX_XC6SLX4_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie, &spartan3_op } #endif /* _SPARTAN3_H_ */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index c9ee1d5bf6..dd77ad6325 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -11,6 +11,8 @@ #include <asm/processor.h> +#define CONTROL_REGISTER_W1C_MASK 0x00020000 /* W1C: PHY_CLK_VALID */ + /* Global offsets */ #define FSL_SKIP_PCI 0x100 diff --git a/include/virtex2.h b/include/virtex2.h index 2e9a4f52da..7b7825f513 100644 --- a/include/virtex2.h +++ b/include/virtex2.h @@ -11,36 +11,34 @@ #include <xilinx.h> -extern int Virtex2_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Virtex2_info(Xilinx_desc *desc); +extern struct xilinx_fpga_op virtex2_op; /* * Slave SelectMap Implementation function table. */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Virtex2_Slave_SelectMap_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_virtex2_slave_selectmap_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; -} Xilinx_Virtex2_Slave_Serial_fns; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; +} xilinx_virtex2_slave_serial_fns; /* Device Image Sizes (in bytes) *********************************************************************/ @@ -60,39 +58,39 @@ typedef struct { /* Descriptor Macros *********************************************************************/ #define XILINX_XC2V40_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V80_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V250_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie, &virtex2_op } #endif /* _VIRTEX2_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index 00a585e5fc..9801267c59 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -12,7 +12,7 @@ /* Xilinx types *********************************************************************/ -typedef enum { /* typedef Xilinx_iface */ +typedef enum { /* typedef xilinx_iface */ min_xilinx_iface_type, /* low range check value */ slave_serial, /* serial data and external clock */ master_serial, /* serial data w/ internal clock (not used) */ @@ -22,48 +22,55 @@ typedef enum { /* typedef Xilinx_iface */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ max_xilinx_iface_type /* insert all new types before this */ -} Xilinx_iface; /* end, typedef Xilinx_iface */ +} xilinx_iface; /* end, typedef xilinx_iface */ -typedef enum { /* typedef Xilinx_Family */ +typedef enum { /* typedef xilinx_family */ min_xilinx_type, /* low range check value */ - Xilinx_Spartan2, /* Spartan-II Family */ - Xilinx_VirtexE, /* Virtex-E Family */ - Xilinx_Virtex2, /* Virtex2 Family */ - Xilinx_Spartan3, /* Spartan-III Family */ + xilinx_spartan2, /* Spartan-II Family */ + xilinx_virtexE, /* Virtex-E Family */ + xilinx_virtex2, /* Virtex2 Family */ + xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ -} Xilinx_Family; /* end, typedef Xilinx_Family */ +} xilinx_family; /* end, typedef xilinx_family */ -typedef struct { /* typedef Xilinx_desc */ - Xilinx_Family family; /* part type */ - Xilinx_iface iface; /* interface type */ +typedef struct { /* typedef xilinx_desc */ + xilinx_family family; /* part type */ + xilinx_iface iface; /* interface type */ size_t size; /* bytes of data part can accept */ void *iface_fns; /* interface function table */ int cookie; /* implementation specific cookie */ + struct xilinx_fpga_op *operations; /* operations */ char *name; /* device name in bitstream */ -} Xilinx_desc; /* end, typedef Xilinx_desc */ +} xilinx_desc; /* end, typedef xilinx_desc */ + +struct xilinx_fpga_op { + int (*load)(xilinx_desc *, const void *, size_t); + int (*dump)(xilinx_desc *, const void *, size_t); + int (*info)(xilinx_desc *); +}; /* Generic Xilinx Functions *********************************************************************/ -extern int xilinx_load(Xilinx_desc *desc, const void *image, size_t size); -extern int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int xilinx_info(Xilinx_desc *desc); +int xilinx_load(xilinx_desc *desc, const void *image, size_t size); +int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize); +int xilinx_info(xilinx_desc *desc); /* Board specific implementation specific function types *********************************************************************/ -typedef int (*Xilinx_pgm_fn)( int assert_pgm, int flush, int cookie ); -typedef int (*Xilinx_init_fn)( int cookie ); -typedef int (*Xilinx_err_fn)( int cookie ); -typedef int (*Xilinx_done_fn)( int cookie ); -typedef int (*Xilinx_clk_fn)( int assert_clk, int flush, int cookie ); -typedef int (*Xilinx_cs_fn)( int assert_cs, int flush, int cookie ); -typedef int (*Xilinx_wr_fn)( int assert_write, int flush, int cookie ); -typedef int (*Xilinx_rdata_fn)( unsigned char *data, int cookie ); -typedef int (*Xilinx_wdata_fn)( unsigned char data, int flush, int cookie ); -typedef int (*Xilinx_busy_fn)( int cookie ); -typedef int (*Xilinx_abort_fn)( int cookie ); -typedef int (*Xilinx_pre_fn)( int cookie ); -typedef int (*Xilinx_post_fn)( int cookie ); -typedef int (*Xilinx_bwr_fn)( void *buf, size_t len, int flush, int cookie ); +typedef int (*xilinx_pgm_fn)(int assert_pgm, int flush, int cookie); +typedef int (*xilinx_init_fn)(int cookie); +typedef int (*xilinx_err_fn)(int cookie); +typedef int (*xilinx_done_fn)(int cookie); +typedef int (*xilinx_clk_fn)(int assert_clk, int flush, int cookie); +typedef int (*xilinx_cs_fn)(int assert_cs, int flush, int cookie); +typedef int (*xilinx_wr_fn)(int assert_write, int flush, int cookie); +typedef int (*xilinx_rdata_fn)(unsigned char *data, int cookie); +typedef int (*xilinx_wdata_fn)(unsigned char data, int flush, int cookie); +typedef int (*xilinx_busy_fn)(int cookie); +typedef int (*xilinx_abort_fn)(int cookie); +typedef int (*xilinx_pre_fn)(int cookie); +typedef int (*xilinx_post_fn)(int cookie); +typedef int (*xilinx_bwr_fn)(void *buf, size_t len, int flush, int cookie); #endif /* _XILINX_H_ */ diff --git a/include/zynqpl.h b/include/zynqpl.h index c81446e986..8a9ec3297f 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -12,9 +12,7 @@ #include <xilinx.h> -extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size); -extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int zynq_info(Xilinx_desc *desc); +extern struct xilinx_fpga_op zynq_op; #define XILINX_ZYNQ_7010 0x2 #define XILINX_ZYNQ_7015 0x1b @@ -33,21 +31,21 @@ extern int zynq_info(Xilinx_desc *desc); /* Descriptor Macros */ #define XILINX_XC7Z010_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" } +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, &zynq_op, "7z010" } #define XILINX_XC7Z015_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, "7z015" } +{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, &zynq_op, "7z015" } #define XILINX_XC7Z020_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" } +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, &zynq_op, "7z020" } #define XILINX_XC7Z030_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, "7z030" } +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, &zynq_op, "7z030" } #define XILINX_XC7Z045_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, &zynq_op, "7z045" } #define XILINX_XC7Z100_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, "7z100" } +{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, &zynq_op, "7z100" } #endif /* _ZYNQPL_H_ */ |