diff options
Diffstat (limited to 'include')
253 files changed, 655 insertions, 1403 deletions
diff --git a/include/clk.h b/include/clk.h index dc18b0310a..fe1f8922c6 100644 --- a/include/clk.h +++ b/include/clk.h @@ -9,6 +9,7 @@ #ifndef _CLK_H_ #define _CLK_H_ +#include <linux/errno.h> #include <linux/types.h> /** @@ -59,7 +60,7 @@ struct clk { unsigned long id; }; -#if CONFIG_IS_ENABLED(OF_CONTROL) +#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK) struct phandle_2_cell; int clk_get_by_index_platdata(struct udevice *dev, int index, struct phandle_2_cell *cells, struct clk *clk); @@ -97,19 +98,6 @@ int clk_get_by_index(struct udevice *dev, int index, struct clk *clk); * @return 0 if OK, or a negative error code. */ int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk); -#else -static inline int clk_get_by_index(struct udevice *dev, int index, - struct clk *clk) -{ - return -ENOSYS; -} - -static inline int clk_get_by_name(struct udevice *dev, const char *name, - struct clk *clk) -{ - return -ENOSYS; -} -#endif /** * clk_request - Request a clock by provider-specific ID. @@ -174,5 +162,17 @@ int clk_enable(struct clk *clk); int clk_disable(struct clk *clk); int soc_clk_dump(void); +#else +static inline int clk_get_by_index(struct udevice *dev, int index, + struct clk *clk) +{ + return -ENOSYS; +} +static inline int clk_get_by_name(struct udevice *dev, const char *name, + struct clk *clk) +{ + return -ENOSYS; +} +#endif #endif diff --git a/include/common.h b/include/common.h index e9f0dea308..a8d833b989 100644 --- a/include/common.h +++ b/include/common.h @@ -866,17 +866,20 @@ int getc(void); int tstc(void); /* stdout */ -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT) -#define putc(...) do { } while (0) -#define puts(...) do { } while (0) -#define printf(...) do { } while (0) -#define vprintf(...) do { } while (0) -#else +#if !defined(CONFIG_SPL_BUILD) || \ + (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \ + (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ + defined(CONFIG_SPL_SERIAL_SUPPORT)) void putc(const char c); void puts(const char *s); int printf(const char *fmt, ...) __attribute__ ((format (__printf__, 1, 2))); int vprintf(const char *fmt, va_list args); +#else +#define putc(...) do { } while (0) +#define puts(...) do { } while (0) +#define printf(...) do { } while (0) +#define vprintf(...) do { } while (0) #endif /* stderr */ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index b5fd6c68e8..0c4f645930 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -48,7 +48,6 @@ #define CONFIG_SCSI /* SCSI Support */ #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ -#define CONFIG_CMD_UBI /* UBI Support */ #define CONFIG_CMD_UBIFS /* UBIFS Support */ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ #define CONFIG_CMD_UNZIP /* unzip from memory to memory */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 2a8aeeead5..8710307d8c 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -21,15 +21,8 @@ #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -37,7 +30,6 @@ #define CONFIG_SPL_MAX_SIZE 0x28000 #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index a0ca0db27c..92c69e5cf2 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -28,8 +28,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index eb6ddae74b..4276f653cd 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -44,8 +44,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index f75919dc89..a61e25cc88 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -27,15 +27,8 @@ #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_TPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -46,8 +39,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000 diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 63b0a1e0ed..9754bbd899 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -40,7 +40,6 @@ /* Command line configuration */ #undef CONFIG_CMD_DATE #undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_UBI #undef CONFIG_CMD_NAND #define CONFIG_CMD_REGINFO diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 5da0005c9b..bf75209775 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_MIP405 1 /* ...on a MIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 @@ -57,9 +56,6 @@ #define CONFIG_CMD_SAVES #define CONFIG_CMD_BSP -#if !defined(CONFIG_MIP405T) -#endif - /************************************************************** * I2C Stuff: * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address @@ -312,7 +308,7 @@ /************************************************************ * IDE/ATA stuff ************************************************************/ -#if defined(CONFIG_MIP405T) +#if defined(CONFIG_TARGET_MIP405T) #define CONFIG_SYS_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */ #else #define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ @@ -358,7 +354,7 @@ /************************************************************ * USB support EXPERIMENTAL ************************************************************/ -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) #define CONFIG_USB_UHCI #define CONFIG_USB_KEYBOARD @@ -377,21 +373,4 @@ ************************************************************/ #define CONFIG_BZIP2 1 -/************************************************************ - * Ident - ************************************************************/ - -#define VERSION_TAG "released" -#if !defined(CONFIG_MIP405T) -#define CONFIG_ISO_STRING "MEV-10072-001" -#else -#define CONFIG_ISO_STRING "MEV-10082-001" -#endif - -#if !defined(CONFIG_BOOT_PCI) -#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG -#else -#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version" -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 1c4e082d4e..90b14294b0 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -22,8 +22,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 0c84622b4d..ab8993bf11 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -19,17 +19,9 @@ #define CONFIG_NAND_FSL_IFC #ifdef CONFIG_SDCARD -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xD0001000 @@ -53,18 +45,9 @@ #define CONFIG_SYS_TEXT_BASE 0x11000000 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #else -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xD0001000 @@ -86,8 +69,6 @@ #ifdef CONFIG_NAND #ifdef CONFIG_SECURE_BOOT #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -106,15 +87,7 @@ #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xD0001000 @@ -125,8 +98,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 9fbc128384..41e3ee8f52 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -14,16 +14,9 @@ #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_SDCARD -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -42,17 +35,9 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -78,14 +63,7 @@ #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -96,8 +74,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000 #define CONFIG_SPL_MAX_SIZE 4096 diff --git a/include/configs/PATI.h b/include/configs/PATI.h index e96fbc5aac..ebabdffc31 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -252,9 +252,4 @@ */ #define CONFIG_SYS_DER 0x00000000 -#define VERSION_TAG "released" -#define CONFIG_ISO_STRING "MEV-10084-001" - -#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG - #endif /* __CONFIG_H */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index ecb126b9e3..7d08f0c5d9 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -333,11 +333,4 @@ ************************************************************/ #define CONFIG_BZIP2 1 -/************************************************************ - * Ident - ************************************************************/ -#define VERSION_TAG "released" -#define CONFIG_ISO_STRING "MEV-10066-001" -#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG - #endif /* __CONFIG_H */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 391a697735..53e51e5135 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -374,7 +374,6 @@ /* * UBI */ -#define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 2218907a4e..f7f0acbbed 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -43,15 +43,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -67,7 +60,6 @@ #endif #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 @@ -78,8 +70,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) @@ -94,7 +84,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index d5fd3e956c..e61c80dd05 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -50,15 +50,8 @@ #elif defined(CONFIG_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg #endif -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x30001000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -74,7 +67,6 @@ #endif #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 @@ -85,8 +77,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) @@ -101,7 +91,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 07c511f1d9..02633b641b 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -43,15 +43,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #endif -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x30001000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -67,7 +60,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define BOOT_PAGE_OFFSET 0x27000 #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #ifdef CONFIG_SECURE_BOOT #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* @@ -88,8 +80,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) @@ -104,7 +94,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 065ffcd697..1c7b59cf0e 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -53,15 +53,8 @@ #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg #endif -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -77,7 +70,6 @@ #endif #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 @@ -88,8 +80,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) @@ -104,7 +94,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 1a8c62e73e..7879eb3248 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -42,15 +42,8 @@ #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -66,7 +59,6 @@ #endif #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 @@ -77,8 +69,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) @@ -93,7 +83,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 06f03aa297..aac2e10d0e 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,15 +25,8 @@ #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -43,7 +36,6 @@ #define BOOT_PAGE_OFFSET 0x27000 #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 @@ -54,7 +46,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 38ad503817..92b401dde8 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -25,15 +25,8 @@ #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x00201000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 @@ -44,7 +37,6 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index c5a7d6859d..913b099c56 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -151,12 +151,6 @@ #define CONFIG_LZO #define CONFIG_LZMA -/* Ident */ -/*#define VERSION_TAG "released"*/ -#define VERSION_TAG "unstable" -#define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \ - "MEV-10080-001 " VERSION_TAG - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ @@ -198,7 +192,6 @@ #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000 /* File system */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_JFFS2 #define CONFIG_YAFFS2 diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index ab2477c4d5..cc211c5e20 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -75,7 +75,6 @@ #define CONFIG_LZO /* needed for UBI */ #define CONFIG_RBTREE /* needed for UBI */ #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* @@ -397,18 +396,13 @@ */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ -#define CONFIG_SPL_SERIAL_SUPPORT /* Place BSS for SPL near end of SDRAM */ #define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20) #define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_ENV_SUPPORT /* Place patched DT blob (fdt) at this address */ #define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index f12ee0465e..6b5ed484b3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -206,16 +206,12 @@ /* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT - /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ -#define CONFIG_SPL_MUSB_NEW_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #endif @@ -326,19 +322,12 @@ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) /* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT -#undef CONFIG_SPL_NAND_SUPPORT -#undef CONFIG_SPL_MMC_SUPPORT #define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND /* disable host part of MUSB in SPL */ /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION -/* General network SPL */ -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" #endif /* USB Device Firmware Update support */ @@ -398,8 +387,6 @@ #if defined(CONFIG_SPI_BOOT) /* SPL related */ #undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 @@ -416,7 +403,6 @@ "-(rootfs)" #elif defined(CONFIG_EMMC_BOOT) #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET 0x0 diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index a14310a8ed..18db58ad8a 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -124,7 +124,6 @@ /* SPL */ #undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 9327c3d729..db518a5823 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -279,8 +279,6 @@ #define CONFIG_POWER_TPS65217 /* SPL */ -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" @@ -326,11 +324,6 @@ #if defined CONFIG_SHC_NETBOOT #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ETH_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_MMC #endif diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index 8454872554..833c5c4659 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -80,8 +80,6 @@ #define CONFIG_POWER_TPS65910 /* SPL */ -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT @@ -98,9 +96,6 @@ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) /* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT -#undef CONFIG_SPL_NAND_SUPPORT -#undef CONFIG_SPL_MMC_SUPPORT #define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND /* disable host part of MUSB in SPL */ @@ -108,16 +103,11 @@ /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION -/* General network SPL */ -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" #endif #if defined(CONFIG_EMMC_BOOT) #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET 0x0 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 0055803046..698c924ea6 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -287,18 +287,9 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 98c29b0d66..e18e39ab04 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -140,7 +140,6 @@ #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_BCH -#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */ #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */ #define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */ @@ -344,19 +343,9 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_MTD_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #endif /* __CONFIG_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 495dd8afc5..19ccbcbbd9 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -39,8 +39,6 @@ #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ #define CONFIG_SYS_L2_PL310 @@ -87,9 +85,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* SPL USB Support */ -#ifdef CONFIG_SPL_USB_HOST_SUPPORT -#define CONFIG_SPL_USB_SUPPORT -#endif #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 @@ -318,13 +313,9 @@ #define CONFIG_PHYLIB #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL" - #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT) #undef CONFIG_ENV_IS_IN_FAT #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_NET_SUPPORT #endif #define CONFIG_SYS_RX_ETH_BUFFER 64 diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 3479de40df..d865f415bc 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -104,11 +104,8 @@ #endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_DMA_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 /* SPI */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 5667680230..fcb82e286c 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -1,7 +1,7 @@ /* * Sysam AMCORE board configuration * - * (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it> + * (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -19,6 +19,17 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTCOMMAND "bootm ffc20000" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "upgrade_uboot=loady; " \ + "protect off 0xffc00000 0xffc1ffff; " \ + "erase 0xffc00000 0xffc1ffff; " \ + "cp.b 0x20000 0xffc00000 ${filesize}\0" \ + "upgrade_kernel=loady; " \ + "erase 0xffc20000 0xffefffff; " \ + "cp.b 0x20000 0xffc20000 ${filesize}\0" \ + "upgrade_jffs2=loady; " \ + "erase 0xfff00000 0xffffffff; " \ + "cp.b 0x20000 0xfff00000 ${filesize}\0" #undef CONFIG_CMD_AES #define CONFIG_CMD_DIAG diff --git a/include/configs/apf27.h b/include/configs/apf27.h index e84cfb5d43..79366bed75 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -11,7 +11,6 @@ #define __CONFIG_H #define CONFIG_ENV_VERSION 10 -#define CONFIG_IDENT_STRING " apf27 patch 3.10" #define CONFIG_BOARD_NAME apf27 /* @@ -38,10 +37,8 @@ #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_TEXT_BASE 0xA0000000 -#define CONFIG_SPL_SERIAL_SUPPORT /* NAND boot config */ -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE @@ -72,7 +69,6 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index 92fea87721..80049f7982 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -57,7 +57,6 @@ /* UBI and NAND partitioning */ #ifdef CONFIG_CMD_NAND -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_RBTREE diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index 6dc419e8a5..d6d9838858 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -223,12 +223,8 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE #define CONFIG_RBTREE -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_MTD_UBI_FASTMAP -#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 - #define CONFIG_HW_WATCHDOG #define CONFIG_IMX_WATCHDOG diff --git a/include/configs/arndale.h b/include/configs/arndale.h index b08f341227..74fd9c4227 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -27,8 +27,6 @@ /* Miscellaneous configurable options */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -#define CONFIG_IDENT_STRING " for ARNDALE" - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index c4684843a8..0cc72ca266 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -11,11 +11,6 @@ #define __CONFIG_ASPENITE_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB" - -/* * High Level Configuration Options */ #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 37fa3ec630..9968b14d90 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -186,11 +186,6 @@ #define CONFIG_SPL_MAX_SIZE 0x010000 #define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT - #define CONFIG_SYS_MONITOR_LEN 0x80000 #ifdef CONFIG_SYS_USE_MMC @@ -201,16 +196,12 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 5fdda1af39..c3d07a151e 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -230,11 +230,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) @@ -245,16 +240,12 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 @@ -267,8 +258,6 @@ #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 637c4037dc..edad1dd75b 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -109,7 +109,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif @@ -230,11 +229,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) @@ -245,16 +239,12 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 @@ -267,8 +257,6 @@ #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 diff --git a/include/configs/baltos.h b/include/configs/baltos.h index fc56c82553..58df571323 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -48,7 +48,6 @@ #define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* I2C configuration */ @@ -217,19 +216,13 @@ /* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT - /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX /* USB gadget RNDIS */ -/*#define CONFIG_SPL_MUSB_NEW_SUPPORT*/ /* General network SPL, both CPSW and USB gadget RNDIS */ -/*#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" @@ -291,7 +284,6 @@ /* * Disable CPSW SPL support so we fit within the 101KiB limit. */ -#undef CONFIG_SPL_ETH_SUPPORT #endif /* Network. */ diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index d8a8c0c63f..82d82f49f2 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -350,16 +350,12 @@ DEFAULT_LINUX_BOOT_ENV \ /* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT - /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ -#define CONFIG_SPL_MUSB_NEW_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #endif @@ -465,10 +461,6 @@ DEFAULT_LINUX_BOOT_ENV \ /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION -/* General network SPL */ -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "BAV335x U-Boot SPL" #endif /* USB Device Firmware Update support */ @@ -528,8 +520,6 @@ DEFAULT_LINUX_BOOT_ENV \ #if defined(CONFIG_SPI_BOOT) /* SPL related */ #undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 @@ -547,7 +537,6 @@ DEFAULT_LINUX_BOOT_ENV \ #elif defined(CONFIG_EMMC_BOOT) #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET 0x0 diff --git a/include/configs/boston.h b/include/configs/boston.h new file mode 100644 index 0000000000..e95805408a --- /dev/null +++ b/include/configs/boston.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2016 Imagination Technologies + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __CONFIGS_BOSTON_H__ +#define __CONFIGS_BOSTON_H__ + +/* + * General board configuration + */ +#define CONFIG_DISPLAY_BOARDINFO + +/* + * CPU + */ +#define CONFIG_SYS_MIPS_TIMER_FREQ 30000000 + +/* + * PCI + */ +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_CMD_PCI + +/* + * Memory map + */ +#ifdef CONFIG_64BIT +# define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 +#else +# define CONFIG_SYS_SDRAM_BASE 0x80000000 +#endif + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100000) + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x10000000) + +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) + +/* + * Console + */ +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_BAUDRATE 115200 + +/* + * Flash + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 +#define CONFIG_SYS_MAX_FLASH_SECT 1024 + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#ifdef CONFIG_64BIT +# define CONFIG_ENV_ADDR \ + (0xffffffffb8000000 + (128 << 20) - CONFIG_ENV_SIZE) +#else +# define CONFIG_ENV_ADDR \ + (0xb8000000 + (128 << 20) - CONFIG_ENV_SIZE) +#endif + +#endif /* __CONFIGS_BOSTON_H__ */ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 6a239b59a6..e01d53565c 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -24,9 +24,7 @@ #define CONFIG_HW_WATCHDOG #define CONFIG_OMAP_WATCHDOG -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 #define CONFIG_BOOTCOUNT_LIMIT @@ -58,7 +56,6 @@ /* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ - #define CONFIG_SPL_MMC_SUPPORT #endif /* CONFIG_EMMC_BOOT */ /* @@ -90,7 +87,6 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -257,8 +253,6 @@ MMCARGS #define CONFIG_OMAP3_SPI #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #undef CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index 11f56bfb4d..1e8426fdb5 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED_PSOC 20000 /* GPIO */ -#define CONFIG_SPL_GPIO_SUPPORT /* MMC/SD IP block */ #define CONFIG_MMC @@ -52,7 +51,6 @@ /* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SPL_MMC_SUPPORT /* Always 64 KiB env size */ #define CONFIG_ENV_SIZE (64 << 10) diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 1de5edc301..e425cb9193 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC /* enable 32kHz OSC at bootime */ -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_POWER_TPS65217 #define CONFIG_SYS_NO_FLASH /* have no NOR-flash */ @@ -113,12 +112,7 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN /* General parts of the framework, required. */ -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #endif /* ! __BUR_AM335X_COMMON_H__ */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 9a0469da9f..36a29f1b47 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -18,10 +18,6 @@ #define CONFIG_MACH_TYPE 4122 #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h" diff --git a/include/configs/chromebook_jerry.h b/include/configs/chromebook_jerry.h index d1f5b46089..180527a684 100644 --- a/include/configs/chromebook_jerry.h +++ b/include/configs/chromebook_jerry.h @@ -15,20 +15,13 @@ #include <configs/rk3288_common.h> #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_CMD_SF_TEST -#undef CONFIG_SPL_GPIO_SUPPORT - #define CONFIG_KEYBOARD -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10 diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 6cbdee2fac..39909001f1 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -123,15 +123,8 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS @@ -139,8 +132,6 @@ #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index c839b03591..46584fdf74 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -247,11 +247,8 @@ /* SPL */ #include "imx6_spl.h" -#define CONFIG_SPL_MMC_SUPPORT +#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ -#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024) -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 562ba56189..e4c9358d18 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -306,19 +306,9 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 45fa37a316..92ff251310 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -91,8 +91,6 @@ #include <configs/ti_armv7_omap.h> #undef CONFIG_SPL_OS_BOOT -#undef CONFIG_SPL_GPIO_SUPPORT -#undef CONFIG_SPL_NAND_SUPPORT #undef CONFIG_SYS_MONITOR_LEN #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR @@ -153,15 +151,10 @@ /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT /* EEPROM */ #define CONFIG_CMD_EEPROM diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 6b51b43bad..ddb1e97b6c 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -56,7 +56,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* SATA Boot related defines */ -#define CONFIG_SPL_SATA_SUPPORT #define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 2ec392e4b1..ba1adea364 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -188,8 +188,6 @@ /* UBI stuff */ #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI -#define CONFIG_MTD_UBI_FASTMAP #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ /* Dynamic MTD partition support */ diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index d9954c1b55..b299e155a5 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -74,10 +74,8 @@ #define CONFIG_ENV_SIZE (SZ_64K) /* UBI */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ #define CONFIG_LZO -#define CONFIG_MTD_UBI_FASTMAP #define CONFIG_RBTREE /* Debug commands */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index d3e4523af8..0ee08e61d8 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -70,8 +70,6 @@ #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI -#define CONFIG_MTD_UBI_FASTMAP #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ #define CONFIG_FEC_MXC diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 29189a4336..fbe9c82106 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -45,12 +45,6 @@ #define CONFIG_ENABLE_36BIT_PHYS #define CONFIG_FSL_LAW /* Use common FSL init code */ -#ifdef CONFIG_TRAILBLAZER -#define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" -#else -#define CONFIG_IDENT_STRING " controlcenterd 0.01" -#endif - #ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index db90f92d98..6521ddeb16 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -160,13 +160,7 @@ #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index ef0fd5979e..2403ca3148 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -147,8 +147,6 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 @@ -205,7 +203,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 10 #define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -301,7 +298,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_LZO #define CONFIG_RBTREE -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif @@ -340,12 +336,7 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 @@ -355,10 +346,7 @@ /* Load U-Boot Image From MMC */ #ifdef CONFIG_SPL_MMC_LOAD -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75 -#undef CONFIG_SPL_SPI_SUPPORT #undef CONFIG_SPL_SPI_LOAD #endif diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 4e008124ad..a134889200 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -91,14 +91,7 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h new file mode 100644 index 0000000000..a6d022191e --- /dev/null +++ b/include/configs/db-88f6820-amc.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_DB_88F6820_AMC_H +#define _CONFIG_DB_88F6820_AMC_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_PCI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Partition support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#endif + +/* NAND */ +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * + * MMC is not populated on this board. + * NAND support may be added in the future. + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 96 + +#endif /* _CONFIG_DB_88F6820_AMC_H */ diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 88614b3f45..48b4b2e09c 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -124,15 +124,8 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS @@ -140,8 +133,6 @@ #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 5cdfd1c8c3..c43dece3f4 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -116,14 +116,7 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index abf1394eab..4ad118e0c1 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -193,16 +193,12 @@ /* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* SPL will use serial */ -#define CONFIG_SPL_SERIAL_SUPPORT /* SPL loads an image from NAND */ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5112ef37b9..d17cdbba4b 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -199,7 +199,6 @@ #define CONFIG_SYS_SRAM_SIZE 0x10000 /* Defines for SPL */ -#undef CONFIG_SPL_MTD_SUPPORT #undef CONFIG_SPL_TEXT_BASE #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 521604e70f..a5384a235b 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -17,7 +17,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 4dda3194fd..57640da325 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -17,7 +17,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvision -#define CONFIG_IDENT_STRING " dlvision 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 7ee274ea78..23c173e8d2 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -18,7 +18,6 @@ */ #define MACH_TYPE_DNS325 3800 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 -#define CONFIG_IDENT_STRING "\nD-Link DNS-325" /* * High Level Configuration Options (easy to change) diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index cd05857e88..781a8b573f 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -13,11 +13,6 @@ #define _CONFIG_DOCKSTAR_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ @@ -87,7 +82,6 @@ * File system */ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 8d5dbc03de..194804c293 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -182,11 +182,6 @@ #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 #if defined(CONFIG_QSPI_BOOT) -/* In SPL, use the environment and discard MMC support for space. */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_SPL_MMC_SUPPORT -#endif -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED @@ -197,11 +192,8 @@ #endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_DMA_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/draco.h b/include/configs/draco.h index 889178c283..04240c7899 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -48,10 +48,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index cc7ab8365d..1b440eaf0f 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -12,8 +12,6 @@ #include <linux/sizes.h> #include <asm/arch/sysmap-apq8016.h> -#define CONFIG_IDENT_STRING "\nQualcomm-DragonBoard 410C" - #define CONFIG_MISC_INIT_R /* To stop autoboot */ /* Physical Memory Map */ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index c78c949f13..252e5f5d1e 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -26,11 +26,6 @@ #endif /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 11c1ec4843..4309c5621d 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -122,14 +122,7 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 910bcd4028..f49284c070 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -160,7 +160,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_LZO #define CONFIG_RBTREE -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_NAND_DAVINCI diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index c30b63bd24..982d526263 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -17,10 +17,6 @@ */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xffff0000 #define CONFIG_SPL_MAX_SIZE 0x0000fff0 #define CONFIG_SPL_STACK 0x00020000 @@ -35,12 +31,6 @@ #define CONFIG_SYS_TEXT_BASE 0x00800000 /* - * Version number information - */ - -#define CONFIG_IDENT_STRING " EDMiniV2" - -/* * High Level Configuration Options (easy to change) */ diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index 55ef612f51..81b79b20e3 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -25,10 +25,6 @@ #define CONFIG_MXC_UART #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h" diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h index c6a756d2b9..0a50154dda 100644 --- a/include/configs/espresso7420.h +++ b/include/configs/espresso7420.h @@ -24,7 +24,6 @@ /* select serial console configuration */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -#define CONFIG_IDENT_STRING " for ESPRESSO7420" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* DRAM Memory Banks */ diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 4919cfe353..fda18b206d 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -106,10 +106,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index ce254b3b43..0895497ed3 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -96,7 +96,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_REISER #define CONFIG_CMD_SAVES -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_UNZIP #endif diff --git a/include/configs/evb_rk3288.h b/include/configs/evb_rk3288.h index 342557fff3..390c243cae 100644 --- a/include/configs/evb_rk3288.h +++ b/include/configs/evb_rk3288.h @@ -10,8 +10,6 @@ #define ROCKCHIP_DEVICE_SETTINGS #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SPL @ 32k for ~36k diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 421002d0be..51a0d190db 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -57,10 +57,6 @@ #define COPY_BL2_FNPTR_ADDR 0x02020030 #define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT - /* specific .lds file */ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" diff --git a/include/configs/fennec_rk3288.h b/include/configs/fennec_rk3288.h index 342557fff3..390c243cae 100644 --- a/include/configs/fennec_rk3288.h +++ b/include/configs/fennec_rk3288.h @@ -10,8 +10,6 @@ #define ROCKCHIP_DEVICE_SETTINGS #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SPL @ 32k for ~36k diff --git a/include/configs/firefly-rk3288.h b/include/configs/firefly-rk3288.h index a29f55709d..ee924c3816 100644 --- a/include/configs/firefly-rk3288.h +++ b/include/configs/firefly-rk3288.h @@ -14,8 +14,6 @@ #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 /* SPL @ 32k for ~36k diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index ffbe66072e..ae6539cb63 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -16,11 +16,6 @@ #define _CONFIG_GOFLEXHOME_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 82b1830999..c1b43fd0fe 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -26,11 +26,6 @@ #endif /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-gplugD" - -/* * High Level Configuration Options */ #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 8b573545cd..842ed16190 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -340,9 +340,6 @@ /* no DDR2 Controller */ #undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 -/* Identification string */ -#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-CPCI-AX2000" - /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 265f03c1d0..fa10676a44 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -306,9 +306,6 @@ /* no DDR2 Controller */ #undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 -/* Identification string */ -#define CONFIG_IDENT_STRING " Gaisler LEON3 EP2S60" - /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index 36acf01631..9e00ff93e4 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -272,9 +272,6 @@ /* no DDR2 Controller */ #undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 -/* Identification string */ -#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-XC3S-1500" - /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" diff --git a/include/configs/grsim.h b/include/configs/grsim.h index c2656fbeb2..5736540ff1 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -292,8 +292,6 @@ /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" -#define CONFIG_IDENT_STRING " Gaisler GRSIM" - /* TSIM command: * $ ./tsim-leon3 -mmu -cas * diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 59adbdc102..0f3204e6f4 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -287,6 +287,4 @@ /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" -#define CONFIG_IDENT_STRING " Gaisler GRSIM LEON2" - #endif /* __CONFIG_H */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 5907e98f59..5ac29db240 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -11,11 +11,6 @@ #define _CONFIG_GURUPLUG_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-GuruPlug" - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 92d64a9ce6..f01a74a57b 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -9,9 +9,6 @@ /* SPL */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT /* Location in NAND to read U-Boot from */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M) @@ -32,7 +29,6 @@ #include "imx6_spl.h" /* common IMX6 SPL configuration */ #include "mx6_common.h" -#undef CONFIG_SPL_EXT_SUPPORT #undef CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -152,7 +148,6 @@ #define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ #define CONFIG_CMD_GSC #define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ -#define CONFIG_CMD_UBI #define CONFIG_RBTREE /* Ethernet support */ diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 5e5aa19b4a..39faf80580 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -21,8 +21,6 @@ #define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_IDENT_STRING "hikey" - #define CONFIG_BOARD_EARLY_INIT_F /* Physical Memory Map */ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index c5e6828e2b..99dcb75363 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -20,12 +20,6 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 -#ifdef CONFIG_HRCON_DH -#define CONFIG_IDENT_STRING " hrcon dh 0.01" -#else -#define CONFIG_IDENT_STRING " hrcon 0.01" -#endif - #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index ab236075d2..f686c7ff57 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -10,11 +10,6 @@ #define _CONFIG_IB62x0_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" - -/* * High level configuration options */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index f0d4250409..633941b7dd 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -10,11 +10,6 @@ #define _CONFIG_ICONNECT_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING " Iomega iConnect" - -/* * High level configuration options */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ @@ -95,7 +90,6 @@ * File system */ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index c9d3b93fb5..112e8856b0 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -533,7 +533,6 @@ /* UBI Support */ #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h new file mode 100644 index 0000000000..0a7fe60214 --- /dev/null +++ b/include/configs/imgtec_xilfpga.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2016, Imagination Technologies Ltd. + * + * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Imagination Technologies Ltd. MIPSfpga + */ + +#ifndef __XILFPGA_CONFIG_H +#define __XILFPGA_CONFIG_H + +/* BootROM + MIG is pretty smart. DDR and Cache initialized */ +#define CONFIG_SKIP_LOWLEVEL_INIT + +/*-------------------------------------------- + * CPU configuration + */ +/* CPU Timer rate */ +#define CONFIG_SYS_MIPS_TIMER_FREQ 50000000 + +/* Cache Configuration */ +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT + +/*---------------------------------------------------------------------- + * Memory Layout + */ + +/* SDRAM Configuration (for final code, data, stack, heap) */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 Mbytes */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000) + +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_LOAD_ADDR 0x80500000 /* default load address */ + +/*---------------------------------------------------------------------- + * Commands + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +/*------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_SYS_NO_FLASH + +/*------------------------------------------------------------ + * Console Configuration + */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ +#define CONFIG_BAUDRATE 115200 + +/* ------------------------------------------------- + * Environment + */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x4000 + +/* --------------------------------------------------------------------- + * Board boot configuration + */ +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +#endif /* __XILFPGA_CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 9bd9f6e3e4..76d1ca088d 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -29,17 +29,10 @@ #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_STACK 0x0091FFB8 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */ #if defined(CONFIG_SPL_NAND_SUPPORT) #define CONFIG_SPL_NAND_MXS -#define CONFIG_SPL_DMA_SUPPORT #endif /* MMC support */ @@ -49,7 +42,6 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#define CONFIG_SPL_EXT_SUPPORT #endif /* SATA support */ @@ -57,13 +49,11 @@ #define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#define CONFIG_SPL_EXT_SUPPORT #endif /* Define the payload for FAT/EXT support */ #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_LIBDISK_SUPPORT #endif #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL) diff --git a/include/configs/intip.h b/include/configs/intip.h index c5af36579c..5aa8faebee 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -24,10 +24,8 @@ #define CONFIG_460EX 1 /* Specific PPC460EX */ #ifdef CONFIG_DEVCONCENTER #define CONFIG_HOSTNAME devconcenter -#define CONFIG_IDENT_STRING " devconcenter 0.06" #else #define CONFIG_HOSTNAME intip -#define CONFIG_IDENT_STRING " intip 0.06" #endif #define CONFIG_440 1 diff --git a/include/configs/io.h b/include/configs/io.h index 544d044019..8c9ee0e1ae 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -17,7 +17,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io -#define CONFIG_IDENT_STRING " io 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/io64.h b/include/configs/io64.h index 14ffb33d50..894da84f7e 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -36,7 +36,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io64 -#define CONFIG_IDENT_STRING " io64 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/iocon.h b/include/configs/iocon.h index d85a76c749..87f56f187b 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -17,7 +17,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.06" #include "amcc-common.h" /* Reclaim some space. */ diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 37a5fa40f1..5f07629a59 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -178,7 +178,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 10 #define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -266,7 +265,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_LZO #define CONFIG_RBTREE -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define MTDIDS_NAME_STR "davinci_nand.0" @@ -285,9 +283,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 @@ -309,7 +304,6 @@ #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* GPIO support */ -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_DA8XX_GPIO #define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14) diff --git a/include/configs/kc1.h b/include/configs/kc1.h index c1a9e643ec..32be5281ca 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -129,15 +129,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2 /* diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 8e1de7c817..4ab96bf939 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -65,7 +65,6 @@ #define CONFIG_BOOTP_HOSTNAME /* UBI Support for all Keymile boards */ -#define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index b377c41b04..0d78cfaed6 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -23,14 +23,12 @@ /* KM_KIRKWOOD */ #if defined(CONFIG_KM_KIRKWOOD) -#define CONFIG_IDENT_STRING "\nKeymile Kirkwood" #define CONFIG_HOSTNAME km_kirkwood #define CONFIG_KM_DISABLE_PCIE #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ /* KM_KIRKWOOD_PCI */ #elif defined(CONFIG_KM_KIRKWOOD_PCI) -#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI" #define CONFIG_HOSTNAME km_kirkwood_pci #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #define CONFIG_KM_FPGA_CONFIG @@ -39,7 +37,6 @@ /* KM_KIRKWOOD_128M16 */ #elif defined(CONFIG_KM_KIRKWOOD_128M16) -#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" #define CONFIG_HOSTNAME km_kirkwood_128m16 #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg @@ -51,10 +48,8 @@ #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ # if defined(CONFIG_KM_NUSA) -#define CONFIG_IDENT_STRING "\nKeymile NUSA" #define CONFIG_HOSTNAME kmnusa # elif defined(CONFIG_KM_SUGP1) -#define CONFIG_IDENT_STRING "\nKeymile SUGP1" #define CONFIG_HOSTNAME kmsugp1 #define KM_PCIE_RESET_MPP7 #endif @@ -69,7 +64,6 @@ /* KM_MGCOGE3UN */ #elif defined(CONFIG_KM_MGCOGE3UN) -#define CONFIG_IDENT_STRING "\nKeymile COGE3UN" #define CONFIG_HOSTNAME mgcoge3un #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG @@ -81,7 +75,6 @@ /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#define CONFIG_IDENT_STRING "\nKeymile COGE5UN" #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg @@ -93,7 +86,6 @@ /* KM_PORTL2 */ #elif defined(CONFIG_KM_PORTL2) -#define CONFIG_IDENT_STRING "\nKeymile Port-L2" #define CONFIG_HOSTNAME portl2 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #define CONFIG_KM_PIGGY4_88E6061 @@ -101,7 +93,6 @@ /* KM_SUV31 */ #elif defined(CONFIG_KM_SUV31) #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_IDENT_STRING "\nKeymile SUV31" #define CONFIG_HOSTNAME kmsuv31 #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 9b2c575bad..bd6c83e8a7 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -12,27 +12,20 @@ */ #if defined(CONFIG_INETSPACE_V2) #define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2 -#define CONFIG_IDENT_STRING " IS v2" #elif defined(CONFIG_NETSPACE_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2 -#define CONFIG_IDENT_STRING " NS v2" #elif defined(CONFIG_NETSPACE_LITE_V2) #define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */ #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2 -#define CONFIG_IDENT_STRING " NS v2 Lite" #elif defined(CONFIG_NETSPACE_MINI_V2) #define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */ #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2 -#define CONFIG_IDENT_STRING " NS v2 Mini" #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 -#define CONFIG_IDENT_STRING " NS Max v2" #elif defined(CONFIG_D2NET_V2) #define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2 -#define CONFIG_IDENT_STRING " D2 v2" #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 -#define CONFIG_IDENT_STRING " 2Big v2" #else #error "Unknown board" #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 7a256da1f2..0d72e6993d 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -67,15 +67,6 @@ unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600 @@ -105,15 +96,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 90ae770eef..e5ac50e4ee 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -112,14 +112,6 @@ #endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 #ifdef CONFIG_SECURE_BOOT diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e55fcb2928..ed0e434702 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -60,15 +60,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 @@ -91,15 +82,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 903f6ddad5..42d02986ee 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -259,17 +259,9 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x1800a000 diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h index 16e37bff4f..cec12ad04c 100644 --- a/include/configs/ls2080a_emu.h +++ b/include/configs/ls2080a_emu.h @@ -9,8 +9,6 @@ #include "ls2080a_common.h" -#define CONFIG_IDENT_STRING " LS2080A-EMU" - #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 7f245b5fad..1851d41b58 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -9,8 +9,6 @@ #include "ls2080a_common.h" -#define CONFIG_IDENT_STRING " LS2080A-SIMU" - #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index e878cbe76f..baa35db370 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -12,12 +12,10 @@ * Version number information */ #if defined(CONFIG_LSCHLV2) -#define CONFIG_IDENT_STRING " LS-CHLv2" #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg #define CONFIG_MACH_TYPE 3006 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ #elif defined(CONFIG_LSXHL) -#define CONFIG_IDENT_STRING " LS-XHL" #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg #define CONFIG_MACH_TYPE 2663 /* CONFIG_SYS_TCLK is 200000000 by default */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index da638428a6..7b88ad51d6 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -12,11 +12,6 @@ #define __CONFIG_H /* - * Liebherr extra version info - */ -#define CONFIG_IDENT_STRING " - v2.0" - -/* * High Level Configuration Options */ #define CONFIG_LWMON5 1 /* Board is lwmon5 */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index cdd24cd9ce..4b95af3317 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -46,7 +46,6 @@ #define CONFIG_ENV_OFFSET_REDUND \ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_RBTREE diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index fd47a72cd5..5af55d8013 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -115,7 +115,6 @@ #define CONFIG_ENV_OFFSET_REDUND \ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_RBTREE @@ -239,11 +238,6 @@ #define CONFIG_SPL_TEXT_BASE 0x70008000 #define CONFIG_SPL_PAD_TO 0x8000 #define CONFIG_SPL_STACK 0x70004000 -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index a696c1a688..b156e42a2a 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -216,16 +216,9 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 47d2948b34..29ed28448e 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -84,14 +84,7 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 22a54c7ec4..b6a710f50d 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -109,7 +109,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO @@ -320,15 +319,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index e5bf700853..a07bcc632c 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -177,7 +177,6 @@ #if defined(FLASH) # define CONFIG_CMD_JFFS2 -# define CONFIG_CMD_UBI # undef CONFIG_CMD_UBIFS # if !defined(RAMENV) @@ -192,7 +191,6 @@ # endif #else # undef CONFIG_CMD_JFFS2 -# undef CONFIG_CMD_UBI # undef CONFIG_CMD_UBIFS #endif #endif @@ -202,7 +200,6 @@ #endif #if defined(CONFIG_CMD_UBIFS) -# define CONFIG_CMD_UBI # define CONFIG_LZO #endif @@ -285,16 +282,12 @@ /* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" #define CONFIG_SPL_RAM_DEVICE #ifdef CONFIG_SYS_FLASH_BASE -# define CONFIG_SPL_NOR_SUPPORT # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/miniarm_rk3288.h b/include/configs/miniarm_rk3288.h index 342557fff3..390c243cae 100644 --- a/include/configs/miniarm_rk3288.h +++ b/include/configs/miniarm_rk3288.h @@ -10,8 +10,6 @@ #define ROCKCHIP_DEVICE_SETTINGS #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SPL @ 32k for ~36k diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index dd223be4fa..ed271c2490 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -137,7 +137,6 @@ */ #ifdef CONFIG_SYS_MVFS #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index b2bf5999a5..808736bc1a 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -69,7 +69,6 @@ /* UBI and NAND partitioning */ #ifdef CONFIG_CMD_NAND -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_RBTREE diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index a81dd784c9..a37646e7f4 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -31,9 +31,6 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x87dc0000 #define CONFIG_SYS_TEXT_BASE 0x87e00000 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 366b5b9e53..237ef04481 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -11,8 +11,6 @@ #include <config_distro_defaults.h> #include "mx6_common.h" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #define CONFIG_IMX_THERMAL diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index d3b10e057d..5c2734d3cc 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -10,8 +10,6 @@ #define __MX6QSABRESD_CONFIG_H #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 13589df575..501d7de544 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -12,8 +12,6 @@ #include "mx6_common.h" #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #endif diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 274cb36002..c30e3dd668 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -173,7 +173,6 @@ #define CONFIG_IMX_THERMAL -#define CONFIG_FSL_QSPI #ifdef CONFIG_FSL_QSPI #define CONFIG_SYS_FSL_QSPI_AHB #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 86987df645..4c61999415 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -12,8 +12,6 @@ #include "mx6_common.h" #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #endif diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 614de5fc78..925a4183fb 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -16,8 +16,6 @@ #define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) /* SPL options */ -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -188,15 +186,11 @@ #ifndef CONFIG_SYS_DCACHE_OFF #endif -#define CONFIG_FSL_QSPI #ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 40000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SPI_FLASH_STMICRO #define FSL_QSPI_FLASH_NUM 1 #define FSL_QSPI_FLASH_SIZE SZ_32M #endif diff --git a/include/configs/mxs.h b/include/configs/mxs.h index d80dc5e229..d15dd5fc49 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -49,10 +49,6 @@ #define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT /* Memory sizes */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index cca2324862..7cfdacd789 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -17,7 +17,6 @@ */ #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS #define CONFIG_MACH_TYPE MACH_TYPE_NAS220 -#define CONFIG_IDENT_STRING "\nNAS 220" /* * High Level Configuration Options (easy to change) @@ -111,7 +110,6 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_NAND #define CONFIG_JFFS2_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 4f244a9e91..8b6ee92f66 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -17,7 +17,6 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME neo -#define CONFIG_IDENT_STRING " neo 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index cdae544253..41ebd6da26 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -135,7 +135,6 @@ #define CONFIG_CMD_MTDPARTS /* mtd parts support */ #ifdef UBIFS_SUPPORT -#define CONFIG_CMD_UBI /* UBI Support */ #define CONFIG_CMD_UBIFS /* UBIFS Support */ #endif diff --git a/include/configs/novena.h b/include/configs/novena.h index 13a707457c..8cb02820a9 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -72,8 +72,6 @@ #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) /* SPL */ -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" /* common IMX6 SPL configuration */ /* Ethernet Configuration */ diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h index bf5df9c77b..1d5b3d5a5f 100644 --- a/include/configs/odroid-c2.h +++ b/include/configs/odroid-c2.h @@ -8,8 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_IDENT_STRING " odroid-c2" - /* Serial setup */ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 5196d58954..0b57949f37 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -12,7 +12,6 @@ #include <configs/exynos5-common.h> #undef CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_IDENT_STRING " for ODROID-XU3" #define CONFIG_BOARD_COMMON diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index b134ac9176..740b5885b0 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -56,8 +56,6 @@ #define CONFIG_OMAP_HSMMC /* SPL */ -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 @@ -78,7 +76,6 @@ /* NAND SPL */ #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -349,12 +346,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 3389bf3164..9ca648dd44 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -75,7 +75,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_UBI #ifndef CONFIG_SPL_BUILD @@ -116,13 +115,11 @@ #define CONFIG_SYS_MTDPARTS_RUNTIME /* OneNAND config */ -#define CONFIG_SPL_ONENAND_SUPPORT #define CONFIG_USE_ONENAND_BOARD_INIT #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024) /* NAND config */ -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_SYS_NAND_5_ADDR_CYCLE @@ -167,6 +164,4 @@ #define CONFIG_UBIFS_SILENCE_MSG 1 #define CONFIG_ENV_SIZE (32*1024) -#undef CONFIG_SPL_EXT_SUPPORT - #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 496da17b39..6a60ec3552 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -93,7 +93,6 @@ #ifdef CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */ #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */ #define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 8dffa89298..0036c5cab1 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -59,7 +59,6 @@ /* commands to include */ #ifdef CONFIG_NAND -#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */ #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index b66431929c..fce50f5d81 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #ifdef CONFIG_NAND -#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */ #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 43afecdf48..854fc478ad 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -97,8 +97,6 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 @@ -225,7 +223,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_LZO #define CONFIG_RBTREE -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif @@ -268,9 +265,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 4defa7efe0..908a1af8f6 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -15,23 +15,6 @@ #define _CONFIG_OPENRD_H /* - * Version number information - */ -#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_IDENT_STRING "\nOpenRD-Ultimate" -#else -# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT -# define CONFIG_IDENT_STRING "\nOpenRD-Client" -# else -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_IDENT_STRING "\nOpenRD-Base" -# else -# error Unknown OpenRD board specified -# endif -# endif -#endif - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 1fa2f4db7a..0f76d32c33 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -87,8 +87,6 @@ "fi;" \ "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " -#define CONFIG_IDENT_STRING " for ORIGEN" - #define CONFIG_CLK_1000_400_200 /* MIU (Memory Interleaving Unit) */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 9be9d8b32c..f4b3e06f92 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -80,9 +80,6 @@ /* SPL */ #ifdef CONFIG_SPL #include "imx6_spl.h" -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD #endif diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index ae0f6a5638..721f9d5e4a 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -181,16 +181,9 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -209,17 +202,9 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_SYS_TEXT_BASE 0x11001000 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -241,14 +226,7 @@ #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 @@ -259,8 +237,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0xff800000 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index e24dcb9974..ef081b259b 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -120,16 +120,9 @@ /* CPU */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL" -#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #ifdef CONFIG_SPI_BOOT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 57a76306e2..a70c9887e7 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -44,7 +44,6 @@ #define CONFIG_JFFS2_NAND /* UBI */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index 97cbebacce..c36245b4cc 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -11,12 +11,6 @@ #include <config_distro_defaults.h> #ifdef CONFIG_SPL -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_DMA_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #include "imx6_spl.h" @@ -98,7 +92,6 @@ #define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ #define CONFIG_CMD_GSC #define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ -#define CONFIG_CMD_UBI #define CONFIG_RBTREE /* Physical Memory Map */ diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index 6c42aaac0e..b01fe4c51d 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -29,8 +29,6 @@ #define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -#define CONFIG_IDENT_STRING " for Peach-Pi" - /* Display */ #define CONFIG_LCD #ifdef CONFIG_LCD diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 6c68dd2e0c..c4ae0e2512 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -29,8 +29,6 @@ #define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -#define CONFIG_IDENT_STRING " for Peach-Pit" - /* DRAM Memory Banks */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 909ed9d80a..4130f53582 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -114,13 +114,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* SPL */ -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT - -/* General network SPL */ -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" /* NAND support */ #define CONFIG_CMD_NAND @@ -201,7 +194,6 @@ #if defined(CONFIG_SPL_BUILD) /* disable host part of MUSB in SPL */ /* Disable CPSW SPL support so we fit within the 101KiB limit. */ -#undef CONFIG_SPL_ETH_SUPPORT #endif /* CPSW ethernet */ @@ -214,7 +206,6 @@ #define CONFIG_PHY_REALTEK /* CPSW support */ -#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index c2e2c436da..206bfa71a8 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -163,12 +163,6 @@ #define CONFIG_SPL_MAX_SIZE 0x010000 #define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT - #define CONFIG_SYS_MONITOR_LEN 0x80000 #ifdef CONFIG_SYS_USE_MMC @@ -179,13 +173,10 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 diff --git a/include/configs/platinum.h b/include/configs/platinum.h index 34ce086912..f3ac4589aa 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -8,8 +8,6 @@ #define __PLATINUM_CONFIG_H__ /* SPL */ -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT /* Location in NAND to read U-Boot from */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) @@ -25,7 +23,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 6393ff3fed..fb1339c02d 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -18,7 +18,6 @@ */ #define MACH_TYPE_POGO_E02 3542 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 -#define CONFIG_IDENT_STRING "\nPogo E02" /* * High Level Configuration Options (easy to change) @@ -82,7 +81,6 @@ * File system */ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/popmetal_rk3288.h b/include/configs/popmetal_rk3288.h index 342557fff3..390c243cae 100644 --- a/include/configs/popmetal_rk3288.h +++ b/include/configs/popmetal_rk3288.h @@ -10,8 +10,6 @@ #define ROCKCHIP_DEVICE_SETTINGS #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SPL @ 32k for ~36k diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 990fd84b32..99a201c403 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -42,10 +42,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #define CONFIG_PHY_ATHEROS #define CONFIG_FACTORYSET diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 55be46bcf2..f8ed22a436 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -51,10 +51,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index 101a3ed5bd..4b26662744 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -24,8 +24,6 @@ #define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */ #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 601186c5c1..e8bf9878f2 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -9,6 +9,7 @@ #include <asm/arch/hardware.h> +#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY #define CONFIG_SYS_NO_FLASH #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_ENV_SIZE 0x2000 @@ -24,10 +25,6 @@ #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SPL_BOARD_INIT @@ -66,10 +63,6 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_PINCTRL_SUPPORT -#define CONFIG_SPL_RAM_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT - #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_NR_DRAM_BANKS 1 #define SDRAM_BANK_SIZE (2UL << 30) diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index e9626a5e39..b026122f52 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -83,4 +83,16 @@ #endif +/* enable usb config for usb ether */ +#define CONFIG_USB_HOST_ETHER + +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_ASIX88179 +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_ETHER_RTL8152 + +/* rockchip xhci host driver */ +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + #endif diff --git a/include/configs/rock2.h b/include/configs/rock2.h index a29f55709d..ee924c3816 100644 --- a/include/configs/rock2.h +++ b/include/configs/rock2.h @@ -14,8 +14,6 @@ #include <configs/rk3288_common.h> -#define CONFIG_SPL_MMC_SUPPORT - #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 /* SPL @ 32k for ~36k diff --git a/include/configs/rut.h b/include/configs/rut.h index aea8e217d0..5f62358507 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -37,10 +37,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #define CONFIG_PHY_NATSEMI #define CONFIG_FACTORYSET diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index c1c01bd2ee..7a049d4580 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -121,22 +121,14 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_PMECC_CAP 8 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 563c045dc9..e684d2a77d 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -125,27 +125,17 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index fef925fece..5e6617410c 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -67,7 +67,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif @@ -124,26 +123,17 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 248de8db08..8b73a1b03a 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -164,26 +164,17 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 @@ -196,8 +187,6 @@ #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index d874ab524e..c90e1e6f8a 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -124,26 +124,17 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_PMECC_CAP 8 @@ -158,8 +149,6 @@ #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 61c3f85cc2..b9927e9d25 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -122,26 +122,17 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_PMECC_CAP 8 @@ -156,8 +147,6 @@ #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 diff --git a/include/configs/sandbox_spl.h b/include/configs/sandbox_spl.h index ffc309867a..2aaa3ab976 100644 --- a/include/configs/sandbox_spl.h +++ b/include/configs/sandbox_spl.h @@ -10,11 +10,6 @@ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #endif diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index fa76a257fa..748a2ea5bb 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -11,11 +11,6 @@ #define _CONFIG_SHEEVAPLUG_H /* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" - -/* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 3eca93b996..d81e1a575d 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -133,22 +133,8 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_FS_FAT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT - -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT - -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 @@ -156,7 +142,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_AM33XX_BCH -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -285,10 +270,7 @@ #define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_MTD_UBI_FASTMAP -#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 #endif /* Commen environment */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 8ad8f24cc9..1ea41a22cb 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -239,13 +239,8 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT - #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index c8148bb7ae..f83a9c8e79 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -166,7 +166,6 @@ /* * File system */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_DEVICE diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 92a08332a3..5c60887563 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -20,7 +20,6 @@ #define CONFIG_BOARD_COMMON -#define CONFIG_IDENT_STRING " for SMDK5250" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SMDK_H */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index a46ca74166..d8d095ff4d 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -31,7 +31,6 @@ #define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -#define CONFIG_IDENT_STRING " for SMDK5420" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* USB */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 9d52689b80..0ad1a27ba1 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -167,7 +167,6 @@ #define CONFIG_SYS_NO_FLASH 1 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ -#define CONFIG_IDENT_STRING " for SMDKC100" #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) #define CONFIG_ENABLE_MMU diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index efb18ffa29..ccb89216d8 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -67,7 +67,6 @@ #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE /* FLASH and environment organization */ -#define CONFIG_IDENT_STRING " for SMDKC210/V310" #define CONFIG_CLK_1000_400_200 diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 5062cd0e44..3bc9819f9c 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -137,16 +137,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/snow.h b/include/configs/snow.h index 1d8d8da397..01d9db8e60 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -15,7 +15,6 @@ #define CONFIG_BOARD_COMMON -#define CONFIG_IDENT_STRING " for snow" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SNOW_H */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index b3fb245fea..084874d2fd 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -300,7 +300,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* UBI and UBIFS support */ #if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND) -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO @@ -322,36 +321,19 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE (64 * 1024) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#ifdef CONFIG_DM_MMC -#define CONFIG_SPL_MMC_SUPPORT -#endif -#ifdef CONFIG_DM_SPI -#define CONFIG_SPL_SPI_SUPPORT -#endif -#ifdef CONFIG_SPL_NAND_DENALI -#define CONFIG_SPL_NAND_SUPPORT -#endif - /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#define CONFIG_SPL_LIBDISK_SUPPORT #else #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 /* offset 512 sect (256k) */ -#define CONFIG_SPL_LIBDISK_SUPPORT #endif #endif /* SPL QSPI boot support */ #ifdef CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #endif diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 1c7d45e4a8..8d90c914ba 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -192,9 +192,7 @@ "else echo \"Unsupported boot mode: \"${bootmode} ; " \ "fi\0" \ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_MTD_UBI_FASTMAP #define CONFIG_RBTREE #define CONFIG_LZO #define MTDPARTS_DEFAULT \ diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 7f6cb9318b..a6973c56ac 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -182,7 +182,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x04000000 #define CONFIG_SYS_MALLOC_LEN (1024*1024) -#define CONFIG_IDENT_STRING "-SPEAr" #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/spear3xx_evb.h b/include/configs/spear3xx_evb.h index 8090bc8973..dd73a4d1bd 100644 --- a/include/configs/spear3xx_evb.h +++ b/include/configs/spear3xx_evb.h @@ -12,22 +12,19 @@ * High Level Configuration Options * (easy to change) */ -#if defined(CONFIG_spear300) +#if defined(CONFIG_SPEAR300) #define CONFIG_SPEAR3XX -#define CONFIG_SPEAR300 -#elif defined(CONFIG_spear310) +#elif defined(CONFIG_SPEAR310) #define CONFIG_SPEAR3XX -#define CONFIG_SPEAR310 -#elif defined(CONFIG_spear320) +#elif defined(CONFIG_SPEAR320) #define CONFIG_SPEAR3XX -#define CONFIG_SPEAR320 #endif -#if defined(CONFIG_usbtty) +#if defined(CONFIG_USBTTY) #define CONFIG_SPEAR_USBTTY #endif -#if defined(CONFIG_nand) +#if defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #else #define CONFIG_ENV_IS_IN_FLASH diff --git a/include/configs/spear6xx_evb.h b/include/configs/spear6xx_evb.h index 28dddcc5b9..7745247052 100644 --- a/include/configs/spear6xx_evb.h +++ b/include/configs/spear6xx_evb.h @@ -12,13 +12,11 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_SPEAR600 - -#if defined(CONFIG_usbtty) +#if defined(CONFIG_USBTTY) #define CONFIG_SPEAR_USBTTY #endif -#if defined(CONFIG_nand) +#if defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #else #define CONFIG_ENV_IS_IN_FLASH diff --git a/include/configs/spring.h b/include/configs/spring.h index 8940123f34..d8c9b4a783 100644 --- a/include/configs/spring.h +++ b/include/configs/spring.h @@ -13,7 +13,6 @@ #define CONFIG_BOARD_COMMON -#define CONFIG_IDENT_STRING " for spring" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SPRING_H */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 5fabbadba8..5cd37d700f 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -20,16 +20,6 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 -#ifdef CONFIG_STRIDER_CPU_DP -#define CONFIG_IDENT_STRING " strider cpu dp 0.01" -#elif defined(CONFIG_STRIDER_CPU) -#define CONFIG_IDENT_STRING " strider cpu 0.01" -#elif defined(CONFIG_STRIDER_CON_DP) -#define CONFIG_IDENT_STRING " strider con dp 0.01" -#else -#define CONFIG_IDENT_STRING " strider con 0.01" -#endif - #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 708ab1793e..deb2e8d07d 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -134,13 +134,11 @@ #ifdef CONFIG_NAND_SUNXI #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 -#define CONFIG_SPL_NAND_SUPPORT 1 #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_MAX_NAND_DEVICE 8 #endif #ifdef CONFIG_SPL_SPI_SUNXI -#define CONFIG_SPL_SPI_FLASH_SUPPORT 1 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #endif @@ -180,7 +178,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ -#define CONFIG_IDENT_STRING " Allwinner Technology" #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ @@ -189,9 +186,6 @@ #define CONFIG_FAT_WRITE /* enable write access */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_BOARD_LOAD_IMAGE @@ -206,12 +200,6 @@ #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ #endif -#define CONFIG_SPL_LIBDISK_SUPPORT - -#ifdef CONFIG_MMC -#define CONFIG_SPL_MMC_SUPPORT -#endif - #ifndef CONFIG_ARM64 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" #endif @@ -232,7 +220,6 @@ /* I2C */ #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ defined CONFIG_SY8106A_POWER -#define CONFIG_SPL_I2C_SUPPORT #endif #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ @@ -266,7 +253,6 @@ extern int soft_i2c_gpio_scl; #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ defined CONFIG_SY8106A_POWER -#define CONFIG_SPL_POWER_SUPPORT #endif #ifndef CONFIG_CONS_INDEX @@ -293,7 +279,6 @@ extern int soft_i2c_gpio_scl; /* GPIO */ #define CONFIG_SUNXI_GPIO -#define CONFIG_SPL_GPIO_SUPPORT #ifdef CONFIG_VIDEO /* diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index a63db65d3a..61c563eb27 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -201,16 +201,6 @@ #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -260,7 +250,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 696ca32c9c..176f54469c 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -288,19 +288,9 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 2c41dd8eb6..af0b841e2e 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -143,8 +143,6 @@ #if defined(CONFIG_SPL_BUILD) /* SPL related */ #undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 @@ -258,14 +256,8 @@ #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 7b0940a7f2..29614e0f9e 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -122,11 +122,6 @@ CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT - #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 8bbf8790cc..d27ab9c8e9 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -149,14 +149,7 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 25ac2cba4b..8d7b280f56 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -44,10 +44,6 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 5c3b3da73c..4387082b26 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -15,9 +15,6 @@ #define CONFIG_SYS_NO_FLASH -#define CONFIG_IDENT_STRING \ - " for Cavium Thunder CN88XX ARM v8 Multi-Core" - #define MEM_BASE 0x00500000 #define CONFIG_SYS_LOWMEM_BASE MEM_BASE diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 82ab47936c..22a8e4f4ff 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -166,15 +166,7 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT + #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index e3cd647819..b3215a2bcb 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -132,15 +132,7 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT + #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 9a671de730..6b63fd29d3 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -62,7 +62,6 @@ (128 << 20)) /* Enable the watchdog inside of SPL */ -#define CONFIG_SPL_WATCHDOG_SUPPORT /* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 32cb20273a..d8a8c4a875 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -260,30 +260,15 @@ #define CONFIG_CMD_SPL #endif -#ifdef CONFIG_MMC -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_EXT_SUPPORT -#endif - #define CONFIG_SYS_THUMB_BUILD /* General parts of the framework, required. */ -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #endif #endif /* !CONFIG_NOR_BOOT */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index c8df48adc8..9c0614e566 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -54,8 +54,6 @@ CONFIG_SYS_SPL_MALLOC_SIZE + \ SPL_MALLOC_F_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO @@ -206,7 +204,6 @@ /* U-Boot command configuration */ #define CONFIG_CMD_SAVES -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_EEPROM @@ -307,15 +304,10 @@ #undef CONFIG_SPL_OS_BOOT /* We do not have MMC support.. yet.. */ -#undef CONFIG_SPL_LIBDISK_SUPPORT -#undef CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_SPL_FAT_SUPPORT -#undef CONFIG_SPL_EXT_SUPPORT #undef CONFIG_MMC #undef CONFIG_GENERIC_MMC /* And no support for GPIO, yet.. */ -#undef CONFIG_SPL_GPIO_SUPPORT /* we may include files below only after all above definitions */ #include <asm/arch/hardware.h> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 33426c89bb..d607f407fd 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -69,7 +69,6 @@ /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (64 << 20)) diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 8c88ebf2f0..4115c78e94 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -164,7 +164,6 @@ /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ #undef CONFIG_SYS_I2C #undef CONFIG_SYS_I2C_OMAP24XX -#undef CONFIG_SPL_I2C_SUPPORT #endif #endif /* __CONFIG_TI_OMAP4_COMMON_H */ diff --git a/include/configs/titanium.h b/include/configs/titanium.h index f550aab247..bbdaf0443d 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -197,7 +197,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_RBTREE #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #endif /* __CONFIG_H */ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 3173dc0c17..029eddd7d0 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -12,11 +12,6 @@ #include <linux/kconfig.h> /* SPL */ /* #if defined(CONFIG_SPL_BUILD) */ - -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT - /* common IMX6 SPL configuration */ #include "imx6_spl.h" diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index e5d321ac6a..c1c94954ac 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -146,7 +146,6 @@ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#define CONFIG_CMD_UBI /* UBI commands */ #define CONFIG_CMD_UBIFS /* UBIFS commands */ #define CONFIG_LZO /* LZO is needed for UBIFS */ @@ -319,19 +318,9 @@ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/udoo.h b/include/configs/udoo.h index fba78d01c3..0a7767c205 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -11,8 +11,6 @@ #include "mx6_common.h" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #define MACH_TYPE_UDOO 4800 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index b3ca46be67..29be00a895 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -31,9 +31,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_MISC_INIT_F -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -277,18 +274,10 @@ #define CONFIG_PANIC_HANG #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NOR_SUPPORT #ifdef CONFIG_ARM64 #define CONFIG_SPL_BOARD_LOAD_IMAGE -#else -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #endif -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT - #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 diff --git a/include/configs/vct.h b/include/configs/vct.h index 168902cb2f..f2e0e5cad3 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -246,7 +246,6 @@ int vct_gpio_get(int pin); #if defined(CONFIG_VCT_ONENAND) #define CONFIG_SYS_USE_UBI #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 71c4a1f08d..48834c2fae 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -19,8 +19,6 @@ #define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_IDENT_STRING " vexpress_aemv8a" - /* Link Definitions */ #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM) diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 33f966ac6e..03586f03d3 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR /* UBI */ -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_LZO diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 295f834602..69d0fd5c88 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -12,8 +12,6 @@ #include <config_distro_defaults.h> #include "mx6_common.h" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #define MACH_TYPE_WANDBOARD 4412 diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index 25bfeef036..5a04b99400 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -22,15 +22,9 @@ */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 /* 512 KB */ -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10002300 #define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index b2103b49b5..ff39c3184f 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -188,12 +188,8 @@ #define CONFIG_SPL_BOARD_INIT /* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* SPL will use serial */ -#define CONFIG_SPL_SERIAL_SUPPORT /* SPL will load U-Boot from NAND offset 0x40000 */ -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_BOOT diff --git a/include/configs/x600.h b/include/configs/x600.h index 4af6b67f9e..f15b1f9007 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -115,7 +115,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_SAVES -#define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_LZO @@ -148,7 +147,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x04000000 #define CONFIG_SYS_MALLOC_LEN (8 << 20) -#define CONFIG_IDENT_STRING "-SPEAr" #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE @@ -267,10 +265,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NOR_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ /* * Please select/define only one of the following diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 02f0e4c9a9..5ed8beb9c2 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -34,10 +34,6 @@ /* Have release address at the end of 256MB for now */ #define CPU_RELEASE_ADDR 0xFFFFFF0 -#if !defined(CONFIG_IDENT_STRING) -# define CONFIG_IDENT_STRING " Xilinx ZynqMP" -#endif - #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ @@ -79,7 +75,9 @@ /* Diff from config_distro_defaults.h */ #define CONFIG_SUPPORT_RAW_INITRD +#if !defined(CONFIG_SPL_BUILD) #define CONFIG_ENV_VARS_UBOOT_CONFIG +#endif #define CONFIG_AUTO_COMPLETE /* PXE */ @@ -112,7 +110,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 #if defined(CONFIG_ZYNQMP_USB) -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_XHCI_ZYNQMP @@ -140,7 +138,6 @@ # define DFU_ALT_INFO #endif - #define CONFIG_BOARD_LATE_INIT /* Do not preserve environment */ @@ -189,7 +186,6 @@ #endif #ifdef CONFIG_SATA_CEVA -#define CONFIG_AHCI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -251,18 +247,26 @@ DFU_ALT_INFO #endif +/* SPL can't handle all huge variables - define just DFU */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) +#undef CONFIG_EXTRA_ENV_SETTINGS +# define CONFIG_EXTRA_ENV_SETTINGS \ + "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ + "atf-uboot.ub ram 0x10000000 0x1000000;" \ + "Image ram 0x80000 0x3f80000;" \ + "system.dtb ram 0x4000000 0x100000\0" \ + "dfu_bufsiz=0x1000\0" +#endif + #define CONFIG_SPL_TEXT_BASE 0xfffc0000 #define CONFIG_SPL_STACK 0xfffffffc -#define CONFIG_SPL_MAX_SIZE 0x20000 +#define CONFIG_SPL_MAX_SIZE 0x40000 /* Just random location in OCM */ -#define CONFIG_SPL_BSS_START_ADDR 0x1000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000000 +#define CONFIG_SPL_BSS_START_ADDR 0x0 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_RAM_DEVICE @@ -272,21 +276,32 @@ #define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000 /* ATF is my kernel image */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf.ub" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub" /* FIT load address for RAM boot */ #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000 /* MMC support */ #ifdef CONFIG_ZYNQ_SDHCI -# define CONFIG_SPL_MMC_SUPPORT # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */ # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */ # define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */ -# define CONFIG_SPL_LIBDISK_SUPPORT -# define CONFIG_SPL_FAT_SUPPORT # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) +# undef CONFIG_CMD_BOOTD +# define CONFIG_SPL_ENV_SUPPORT +# define CONFIG_SPL_HASH_SUPPORT +# define CONFIG_ENV_MAX_ENTRIES 10 + +# define CONFIG_SYS_SPL_MALLOC_START 0x20000000 +# define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000000 + +#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE +# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used" +#endif +#endif + #endif /* __XILINX_ZYNQMP_H */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index 44434aab7b..8e4b96033b 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -16,7 +16,6 @@ #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) #define CONFIG_ZYNQ_EEPROM -#define CONFIG_AHCI #define CONFIG_SATA_CEVA #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} diff --git a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h index c9f443207d..b19a55219a 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h @@ -15,8 +15,6 @@ #define CONFIG_AHCI #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} -#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h index 526d0bbe58..0714d72911 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h @@ -12,8 +12,6 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB1_XHCI_BASEADDR} -#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h b/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h deleted file mode 100644 index 65277a64c3..0000000000 --- a/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Configuration for Xilinx ZynqMP zc1751 XM018 DC4 - * - * (C) Copyright 2015 Xilinx, Inc. - * Michal Simek <michal.simek@xilinx.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H -#define __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H - -#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm018 dc4" - -#include <configs/xilinx_zynqmp.h> - -#endif /* __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h index 76350d9579..6a0e3975b9 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h @@ -13,8 +13,6 @@ #define CONFIG_ZYNQ_SDHCI0 -#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */ diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h index 7ceab3230b..adf2321c5d 100644 --- a/include/configs/xilinx_zynqmp_zcu102.h +++ b/include/configs/xilinx_zynqmp_zcu102.h @@ -45,8 +45,6 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} -#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102" - #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_CMD_EEPROM #define CONFIG_ZYNQ_EEPROM_BUS 5 diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 26be33787a..dd28e6ad75 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -12,8 +12,6 @@ #include <asm/imx-common/gpio.h> /* SPL options */ -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 5f7fefde3d..260df2f0b4 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -293,9 +293,6 @@ /* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_RAM_DEVICE @@ -303,12 +300,9 @@ /* MMC support */ #ifdef CONFIG_ZYNQ_SDHCI -#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif @@ -331,9 +325,7 @@ /* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 #define CONFIG_SYS_SPI_ARGS_OFFS 0x200000 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 diff --git a/include/dt-bindings/clock/boston-clock.h b/include/dt-bindings/clock/boston-clock.h new file mode 100644 index 0000000000..25f9cd25f2 --- /dev/null +++ b/include/dt-bindings/clock/boston-clock.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2016 Imagination Technologies + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ +#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ + +#define BOSTON_CLK_SYS 0 +#define BOSTON_CLK_CPU 1 + +#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */ diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h new file mode 100644 index 0000000000..cf35a577e3 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/mips-gic.h @@ -0,0 +1,9 @@ +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H + +#include <dt-bindings/interrupt-controller/irq.h> + +#define GIC_SHARED 0 +#define GIC_LOCAL 1 + +#endif diff --git a/include/errno.h b/include/errno.h index 15ece2f97f..e0c670a16c 100644 --- a/include/errno.h +++ b/include/errno.h @@ -7,7 +7,7 @@ #ifndef _ERRNO_H #define _ERRNO_H -#include <asm-generic/errno.h> +#include <linux/errno.h> extern int errno; diff --git a/include/ext4fs.h b/include/ext4fs.h index 13d2c5603b..965cd9e9c5 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -28,6 +28,7 @@ #define __EXT4__ #include <ext_common.h> +#define EXT4_INDEX_FL 0x00001000 /* Inode uses hash tree index */ #define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */ #define EXT4_EXT_MAGIC 0xf30a #define EXT4_FEATURE_RO_COMPAT_GDT_CSUM 0x0010 @@ -86,6 +87,8 @@ struct ext_filesystem { uint32_t inodesz; /* Sectors per Block */ uint32_t sect_perblk; + /* Group Descriptor size */ + uint16_t gdsize; /* Group Descriptor Block Number */ uint32_t gdtable_blkno; /* Total block groups of partition */ @@ -95,7 +98,6 @@ struct ext_filesystem { /* Superblock */ struct ext2_sblock *sb; /* Block group descritpor table */ - struct ext2_block_group *bgd; char *gdtable; /* Block Bitmap Related */ @@ -124,7 +126,7 @@ extern int gindex; int ext4fs_init(void); void ext4fs_deinit(void); -int ext4fs_filename_check(char *filename); +int ext4fs_filename_unlink(char *filename); int ext4fs_write(const char *fname, unsigned char *buffer, unsigned long sizebytes); int ext4_write_file(const char *filename, void *buf, loff_t offset, loff_t len, diff --git a/include/ext_common.h b/include/ext_common.h index 6cddf166d9..07b61fa56b 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -49,11 +49,9 @@ #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) /* Log2 size of ext2 block in bytes. */ -#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ +#define LOG2_BLOCK_SIZE(data) (le32_to_cpu \ (data->sblock.log2_block_size) \ + EXT2_MIN_BLOCK_LOG_SIZE) -#define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \ - (data->sblock.inode_size)) #define EXT2_FT_DIR 2 #define SUCCESS 1 @@ -66,92 +64,134 @@ /* The ext2 superblock. */ struct ext2_sblock { - uint32_t total_inodes; - uint32_t total_blocks; - uint32_t reserved_blocks; - uint32_t free_blocks; - uint32_t free_inodes; - uint32_t first_data_block; - uint32_t log2_block_size; - uint32_t log2_fragment_size; - uint32_t blocks_per_group; - uint32_t fragments_per_group; - uint32_t inodes_per_group; - uint32_t mtime; - uint32_t utime; - uint16_t mnt_count; - uint16_t max_mnt_count; - uint16_t magic; - uint16_t fs_state; - uint16_t error_handling; - uint16_t minor_revision_level; - uint32_t lastcheck; - uint32_t checkinterval; - uint32_t creator_os; - uint32_t revision_level; - uint16_t uid_reserved; - uint16_t gid_reserved; - uint32_t first_inode; - uint16_t inode_size; - uint16_t block_group_number; - uint32_t feature_compatibility; - uint32_t feature_incompat; - uint32_t feature_ro_compat; - uint32_t unique_id[4]; + __le32 total_inodes; + __le32 total_blocks; + __le32 reserved_blocks; + __le32 free_blocks; + __le32 free_inodes; + __le32 first_data_block; + __le32 log2_block_size; + __le32 log2_fragment_size; + __le32 blocks_per_group; + __le32 fragments_per_group; + __le32 inodes_per_group; + __le32 mtime; + __le32 utime; + __le16 mnt_count; + __le16 max_mnt_count; + __le16 magic; + __le16 fs_state; + __le16 error_handling; + __le16 minor_revision_level; + __le32 lastcheck; + __le32 checkinterval; + __le32 creator_os; + __le32 revision_level; + __le16 uid_reserved; + __le16 gid_reserved; + __le32 first_inode; + __le16 inode_size; + __le16 block_group_number; + __le32 feature_compatibility; + __le32 feature_incompat; + __le32 feature_ro_compat; + __le32 unique_id[4]; char volume_name[16]; char last_mounted_on[64]; - uint32_t compression_info; + __le32 compression_info; + uint8_t prealloc_blocks; + uint8_t prealloc_dir_blocks; + __le16 reserved_gdt_blocks; + uint8_t journal_uuid[16]; + __le32 journal_inode; + __le32 journal_dev; + __le32 last_orphan; + __le32 hash_seed[4]; + uint8_t default_hash_version; + uint8_t journal_backup_type; + __le16 descriptor_size; + __le32 default_mount_options; + __le32 first_meta_block_group; + __le32 mkfs_time; + __le32 journal_blocks[17]; + __le32 total_blocks_high; + __le32 reserved_blocks_high; + __le32 free_blocks_high; + __le16 min_extra_inode_size; + __le16 want_extra_inode_size; + __le32 flags; + __le16 raid_stride; + __le16 mmp_interval; + __le64 mmp_block; + __le32 raid_stripe_width; + uint8_t log2_groups_per_flex; + uint8_t checksum_type; }; struct ext2_block_group { - __u32 block_id; /* Blocks bitmap block */ - __u32 inode_id; /* Inodes bitmap block */ - __u32 inode_table_id; /* Inodes table block */ - __u16 free_blocks; /* Free blocks count */ - __u16 free_inodes; /* Free inodes count */ - __u16 used_dir_cnt; /* Directories count */ - __u16 bg_flags; - __u32 bg_reserved[2]; - __u16 bg_itable_unused; /* Unused inodes count */ - __u16 bg_checksum; /* crc16(s_uuid+grouo_num+group_desc)*/ + __le32 block_id; /* Blocks bitmap block */ + __le32 inode_id; /* Inodes bitmap block */ + __le32 inode_table_id; /* Inodes table block */ + __le16 free_blocks; /* Free blocks count */ + __le16 free_inodes; /* Free inodes count */ + __le16 used_dir_cnt; /* Directories count */ + __le16 bg_flags; + __le32 bg_exclude_bitmap; + __le16 bg_block_id_csum; + __le16 bg_inode_id_csum; + __le16 bg_itable_unused; /* Unused inodes count */ + __le16 bg_checksum; /* crc16(s_uuid+group_num+group_desc)*/ + /* following fields only exist if descriptor size is 64 */ + __le32 block_id_high; + __le32 inode_id_high; + __le32 inode_table_id_high; + __le16 free_blocks_high; + __le16 free_inodes_high; + __le16 used_dir_cnt_high; + __le16 bg_itable_unused_high; + __le32 bg_exclude_bitmap_high; + __le16 bg_block_id_csum_high; + __le16 bg_inode_id_csum_high; + __le32 bg_reserved; }; /* The ext2 inode. */ struct ext2_inode { - uint16_t mode; - uint16_t uid; - uint32_t size; - uint32_t atime; - uint32_t ctime; - uint32_t mtime; - uint32_t dtime; - uint16_t gid; - uint16_t nlinks; - uint32_t blockcnt; /* Blocks of 512 bytes!! */ - uint32_t flags; - uint32_t osd1; + __le16 mode; + __le16 uid; + __le32 size; + __le32 atime; + __le32 ctime; + __le32 mtime; + __le32 dtime; + __le16 gid; + __le16 nlinks; + __le32 blockcnt; /* Blocks of either 512 or block_size bytes */ + __le32 flags; + __le32 osd1; union { struct datablocks { - uint32_t dir_blocks[INDIRECT_BLOCKS]; - uint32_t indir_block; - uint32_t double_indir_block; - uint32_t triple_indir_block; + __le32 dir_blocks[INDIRECT_BLOCKS]; + __le32 indir_block; + __le32 double_indir_block; + __le32 triple_indir_block; } blocks; char symlink[60]; + char inline_data[60]; } b; - uint32_t version; - uint32_t acl; - uint32_t dir_acl; - uint32_t fragment_addr; - uint32_t osd2[3]; + __le32 version; + __le32 acl; + __le32 size_high; /* previously dir_acl, but never used */ + __le32 fragment_addr; + __le32 osd2[3]; }; /* The header of an ext2 directory entry. */ struct ext2_dirent { - uint32_t inode; - uint16_t direntlen; - uint8_t namelen; - uint8_t filetype; + __le32 inode; + __le16 direntlen; + __u8 namelen; + __u8 filetype; }; struct ext2fs_node { diff --git a/include/fat.h b/include/fat.h index 9d053e6fa6..8ec91cda75 100644 --- a/include/fat.h +++ b/include/fat.h @@ -169,6 +169,7 @@ typedef struct { int fatsize; /* Size of FAT in bits */ __u32 fatlength; /* Length of FAT in sectors */ __u16 fat_sect; /* Starting sector of the FAT */ + __u8 fat_dirty; /* Set if fatbuf has been modified */ __u32 rootdir_sect; /* Start sector of root directory */ __u16 sect_size; /* Size of sectors in bytes */ __u16 clust_size; /* Size of clusters in sectors */ diff --git a/include/fdtdec.h b/include/fdtdec.h index aeb6bab1c4..27887c8c21 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -148,7 +148,6 @@ enum fdt_compat_id { COMPAT_INTEL_MICROCODE, /* Intel microcode update */ COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */ COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */ - COMPAT_SOCIONEXT_XHCI, /* Socionext UniPhier xHCI */ COMPAT_ALTERA_SOCFPGA_DWMAC, /* SoCFPGA Ethernet controller */ COMPAT_ALTERA_SOCFPGA_DWMMC, /* SoCFPGA DWMMC controller */ COMPAT_ALTERA_SOCFPGA_DWC2USB, /* SoCFPGA DWC2 USB controller */ diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index c6f46664c7..e15d3aeaec 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -10,7 +10,7 @@ #ifndef __FSL_ESDHC_H__ #define __FSL_ESDHC_H__ -#include <asm/errno.h> +#include <linux/errno.h> #include <asm/byteorder.h> /* needed for the mmc_cfg definition */ diff --git a/include/hwconfig.h b/include/hwconfig.h index def7ad03da..d30421d267 100644 --- a/include/hwconfig.h +++ b/include/hwconfig.h @@ -13,7 +13,7 @@ #define _HWCONFIG_H #include <linux/types.h> -#include <asm/errno.h> +#include <linux/errno.h> #ifdef CONFIG_HWCONFIG diff --git a/include/linux/compat.h b/include/linux/compat.h index 7236b8d0c3..c7fd649f5e 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -151,8 +151,6 @@ typedef unsigned long sector_t; typedef unsigned long blkcnt_t; #endif -#define ENOTSUPP 524 /* Operation is not supported */ - /* module */ #define THIS_MODULE 0 #define try_module_get(...) 1 diff --git a/include/linux/err.h b/include/linux/err.h index 5b3c8bcf70..e4d22d508c 100644 --- a/include/linux/err.h +++ b/include/linux/err.h @@ -4,7 +4,7 @@ #include <linux/compiler.h> #include <linux/compat.h> -#include <asm/errno.h> +#include <linux/errno.h> /* diff --git a/include/asm-generic/errno.h b/include/linux/errno.h index 464cfb715c..3d94207dff 100644 --- a/include/asm-generic/errno.h +++ b/include/linux/errno.h @@ -1,23 +1,15 @@ -/* - * U-Boot - errno.h Error number defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ +#ifndef _LINUX_ERRNO_H +#define _LINUX_ERRNO_H -#ifndef _GENERIC_ERRNO_H -#define _GENERIC_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Argument list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Argument list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ #define ECHILD 10 /* No child processes */ #define EAGAIN 11 /* Try again */ #define ENOMEM 12 /* Out of memory */ @@ -43,10 +35,13 @@ #define EPIPE 32 /* Broken pipe */ #define EDOM 33 /* Math argument out of domain of func */ #define ERANGE 34 /* Math result not representable */ + #define EDEADLK 35 /* Resource deadlock would occur */ #define ENAMETOOLONG 36 /* File name too long */ #define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ + +#define ENOSYS 38 /* Invalid system call number */ + #define ENOTEMPTY 39 /* Directory not empty */ #define ELOOP 40 /* Too many symbolic links encountered */ #define EWOULDBLOCK EAGAIN /* Operation would block */ @@ -126,14 +121,48 @@ #define EHOSTUNREACH 113 /* No route to host */ #define EALREADY 114 /* Operation already in progress */ #define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ +#define ESTALE 116 /* Stale file handle */ #define EUCLEAN 117 /* Structure needs cleaning */ #define ENOTNAM 118 /* Not a XENIX named type file */ #define ENAVAIL 119 /* No XENIX semaphores available */ #define EISNAM 120 /* Is a named type file */ #define EREMOTEIO 121 /* Remote I/O error */ #define EDQUOT 122 /* Quota exceeded */ + #define ENOMEDIUM 123 /* No medium found */ #define EMEDIUMTYPE 124 /* Wrong medium type */ +#define ECANCELED 125 /* Operation Canceled */ +#define ENOKEY 126 /* Required key not available */ +#define EKEYEXPIRED 127 /* Key has expired */ +#define EKEYREVOKED 128 /* Key has been revoked */ +#define EKEYREJECTED 129 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 130 /* Owner died */ +#define ENOTRECOVERABLE 131 /* State not recoverable */ + +#define ERFKILL 132 /* Operation not possible due to RF-kill */ + +#define EHWPOISON 133 /* Memory page has hardware error */ + +#define ERESTARTSYS 512 +#define ERESTARTNOINTR 513 +#define ERESTARTNOHAND 514 /* restart if no handler.. */ +#define ENOIOCTLCMD 515 /* No ioctl command */ +#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */ +#define EPROBE_DEFER 517 /* Driver requests probe retry */ +#define EOPENSTALE 518 /* open found a stale dentry */ + +/* Defined for the NFSv3 protocol */ +#define EBADHANDLE 521 /* Illegal NFS file handle */ +#define ENOTSYNC 522 /* Update synchronization mismatch */ +#define EBADCOOKIE 523 /* Cookie is stale */ +#define ENOTSUPP 524 /* Operation is not supported */ +#define ETOOSMALL 525 /* Buffer or request is too small */ +#define ESERVERFAULT 526 /* An untranslatable error occurred */ +#define EBADTYPE 527 /* Type not supported by server */ +#define EJUKEBOX 528 /* Request initiated, but will not complete before timeout */ +#define EIOCBQUEUED 529 /* iocb queued, will get completion event */ +#define ERECALLCONFLICT 530 /* conflict with recalled state */ #endif diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 779eea035c..1fd17c303a 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -20,7 +20,7 @@ #else #include <linux/compat.h> #include <mtd/mtd-abi.h> -#include <asm/errno.h> +#include <linux/errno.h> #include <div64.h> #define MAX_MTD_DEVICES 32 diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 87d72dbad6..d55807b2e2 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -16,12 +16,12 @@ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H -#include "config.h" +#include <config.h> -#include "linux/compat.h" -#include "linux/mtd/mtd.h" -#include "linux/mtd/flashchip.h" -#include "linux/mtd/bbm.h" +#include <linux/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/flashchip.h> +#include <linux/mtd/bbm.h> struct mtd_info; struct nand_flash_dev; diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h index 6d1e36505d..a0274461cc 100644 --- a/include/linux/usb/dwc3.h +++ b/include/linux/usb/dwc3.h @@ -180,7 +180,21 @@ struct dwc3 { /* offset: 0xC100 */ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) +#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) +#define DWC3_GUSB2PHYCFG_PHYIF (1 << 3) + +/* Global USB2 PHY Configuration Mask */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK (0xf << 10) + +/* Global USB2 PHY Configuration Offset */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET 10 + +#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \ + DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET) +#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \ + DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET) /* Global USB3 PIPE Control Register */ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) diff --git a/include/mmc.h b/include/mmc.h index aa6d5d1d4f..e815eb3736 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -11,6 +11,7 @@ #define _MMC_H_ #include <linux/list.h> +#include <linux/sizes.h> #include <linux/compiler.h> #include <part.h> @@ -102,6 +103,7 @@ #define SD_CMD_SWITCH_UHS18V 11 #define SD_CMD_APP_SET_BUS_WIDTH 6 +#define SD_CMD_APP_SD_STATUS 13 #define SD_CMD_ERASE_WR_BLK_START 32 #define SD_CMD_ERASE_WR_BLK_END 33 #define SD_CMD_APP_SEND_OP_COND 41 @@ -392,6 +394,12 @@ struct mmc_config { unsigned char part_type; }; +struct sd_ssr { + unsigned int au; /* In sectors */ + unsigned int erase_timeout; /* In milliseconds */ + unsigned int erase_offset; /* In milliseconds */ +}; + /* * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device * with mmc_get_mmc_dev(). @@ -426,6 +434,7 @@ struct mmc { uint write_bl_len; uint erase_grp_size; /* in 512-byte sectors */ uint hc_wp_grp_size; /* in 512-byte sectors */ + struct sd_ssr ssr; /* SD status register */ u64 capacity; u64 capacity_user; u64 capacity_boot; diff --git a/include/reset.h b/include/reset.h index dc0900f96a..f45fcf88c4 100644 --- a/include/reset.h +++ b/include/reset.h @@ -7,6 +7,8 @@ #ifndef _RESET_H #define _RESET_H +#include <linux/errno.h> + /** * A reset is a hardware signal indicating that a HW module (or IP block, or * sometimes an entire off-CPU chip) reset all of its internal state to some @@ -58,6 +60,7 @@ struct reset_ctl { unsigned long id; }; +#ifdef CONFIG_DM_RESET /** * reset_get_by_index - Get/request a reset signal by integer index. * @@ -132,4 +135,33 @@ int reset_assert(struct reset_ctl *reset_ctl); */ int reset_deassert(struct reset_ctl *reset_ctl); +#else +static inline int reset_get_by_index(struct udevice *dev, int index, + struct reset_ctl *reset_ctl) +{ + return -ENOTSUPP; +} + +static inline int reset_get_by_name(struct udevice *dev, const char *name, + struct reset_ctl *reset_ctl) +{ + return -ENOTSUPP; +} + +static inline int reset_free(struct reset_ctl *reset_ctl) +{ + return 0; +} + +static inline int reset_assert(struct reset_ctl *reset_ctl) +{ + return 0; +} + +static inline int reset_deassert(struct reset_ctl *reset_ctl) +{ + return 0; +} +#endif + #endif diff --git a/include/sdhci.h b/include/sdhci.h index 6844c73bdc..144570f2be 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -97,6 +97,7 @@ #define SDHCI_DIV_MASK 0xFF #define SDHCI_DIV_MASK_LEN 8 #define SDHCI_DIV_HI_MASK 0x300 +#define SDHCI_PROG_CLOCK_MODE 0x0020 #define SDHCI_CLOCK_CARD_EN 0x0004 #define SDHCI_CLOCK_INT_STABLE 0x0002 #define SDHCI_CLOCK_INT_EN 0x0001 @@ -242,6 +243,7 @@ struct sdhci_host { unsigned int quirks; unsigned int host_caps; unsigned int version; + unsigned int clk_mul; /* Clock Multiplier value */ unsigned int clock; struct mmc *mmc; const struct sdhci_ops *ops; diff --git a/include/spi.h b/include/spi.h index ca96fa4b31..4c179838ee 100644 --- a/include/spi.h +++ b/include/spi.h @@ -26,12 +26,9 @@ #define SPI_TX_BYTE BIT(8) /* transmit with 1 wire byte */ #define SPI_TX_DUAL BIT(9) /* transmit with 2 wires */ #define SPI_TX_QUAD BIT(10) /* transmit with 4 wires */ - -/* SPI mode_rx flags */ -#define SPI_RX_SLOW BIT(0) /* receive with 1 wire slow */ -#define SPI_RX_FAST BIT(1) /* receive with 1 wire fast */ -#define SPI_RX_DUAL BIT(2) /* receive with 2 wires */ -#define SPI_RX_QUAD BIT(3) /* receive with 4 wires */ +#define SPI_RX_SLOW BIT(11) /* receive with 1 wire slow */ +#define SPI_RX_DUAL BIT(12) /* receive with 2 wires */ +#define SPI_RX_QUAD BIT(13) /* receive with 4 wires */ /* SPI bus connection options - see enum spi_dual_flash */ #define SPI_CONN_DUAL_SHARED (1 << 0) @@ -61,13 +58,11 @@ struct dm_spi_bus { * @cs: Chip select number (0..n-1) * @max_hz: Maximum bus speed that this slave can tolerate * @mode: SPI mode to use for this device (see SPI mode flags) - * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags) */ struct dm_spi_slave_platdata { unsigned int cs; uint max_hz; uint mode; - u8 mode_rx; }; #endif /* CONFIG_DM_SPI */ @@ -94,7 +89,6 @@ struct dm_spi_slave_platdata { * bus (bus->seq) so does not need to be stored * @cs: ID of the chip select connected to the slave. * @mode: SPI mode to use for this slave (see SPI mode flags) - * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags) * @wordlen: Size of SPI word in number of bits * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. @@ -112,7 +106,6 @@ struct spi_slave { unsigned int cs; #endif uint mode; - u8 mode_rx; unsigned int wordlen; unsigned int max_write_size; void *memory_map; diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 324fe72016..80acbcb148 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -32,12 +32,9 @@ #include <onenand_uboot.h> #endif -#include <asm/errno.h> +#include <linux/errno.h> /* configurable */ -#if !defined(CONFIG_MTD_UBI_WL_THRESHOLD) -#define CONFIG_MTD_UBI_WL_THRESHOLD 4096 -#endif #define CONFIG_MTD_UBI_BEB_RESERVE 1 /* debug options (Linux: drivers/mtd/ubi/Kconfig.debug) */ @@ -59,10 +56,6 @@ */ #define CONFIG_MTD_UBI_MODULE -#if !defined(CONFIG_MTD_UBI_BEB_LIMIT) -#define CONFIG_MTD_UBI_BEB_LIMIT 20 -#endif - /* build.c */ #define get_device(...) #define put_device(...) diff --git a/include/usb/lin_gadget_compat.h b/include/usb/lin_gadget_compat.h index 29fb166934..4a01585f80 100644 --- a/include/usb/lin_gadget_compat.h +++ b/include/usb/lin_gadget_compat.h @@ -13,8 +13,6 @@ #include <linux/compat.h> /* common */ -#define ENOTSUPP 524 /* Operation is not supported */ - #define BITS_PER_BYTE 8 #define BITS_TO_LONGS(nr) \ DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) diff --git a/include/version.h b/include/version.h index 777e9f68fa..049430978f 100644 --- a/include/version.h +++ b/include/version.h @@ -14,10 +14,6 @@ #include "generated/version_autogenerated.h" #endif -#ifndef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING "" -#endif - #define U_BOOT_VERSION_STRING U_BOOT_VERSION " (" U_BOOT_DATE " - " \ U_BOOT_TIME " " U_BOOT_TZ ")" CONFIG_IDENT_STRING diff --git a/include/wait_bit.h b/include/wait_bit.h index 061a2db5a2..066e30c118 100644 --- a/include/wait_bit.h +++ b/include/wait_bit.h @@ -11,7 +11,7 @@ #include <common.h> #include <console.h> -#include <asm/errno.h> +#include <linux/errno.h> #include <asm/io.h> /** diff --git a/include/xilinx.h b/include/xilinx.h index aebcb3bfdf..d2a2ea71e1 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -21,6 +21,7 @@ typedef enum { /* typedef xilinx_iface */ master_selectmap, /* master SelectMap (virtex2) */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ + csu_dma, /* csu_dma interface (zynqmp) */ max_xilinx_iface_type /* insert all new types before this */ } xilinx_iface; /* end, typedef xilinx_iface */ @@ -31,6 +32,7 @@ typedef enum { /* typedef xilinx_family */ xilinx_virtex2, /* Virtex2 Family */ xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ + xilinx_zynqmp, /* ZynqMP Family */ max_xilinx_type /* insert all new types before this */ } xilinx_family; /* end, typedef xilinx_family */ diff --git a/include/zynqmppl.h b/include/zynqmppl.h new file mode 100644 index 0000000000..542ace9a03 --- /dev/null +++ b/include/zynqmppl.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2015 Xilinx, Inc, + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _ZYNQMPPL_H_ +#define _ZYNQMPPL_H_ + +#include <xilinx.h> + +#define ZYNQMP_SIP_SVC_CSU_DMA_CHIPID 0xC2000018 +#define ZYNQMP_SIP_SVC_PM_FPGA_LOAD 0xC2000016 +#define ZYNQMP_FPGA_OP_INIT (1 << 0) +#define ZYNQMP_FPGA_OP_LOAD (1 << 1) +#define ZYNQMP_FPGA_OP_DONE (1 << 2) + +extern struct xilinx_fpga_op zynqmp_op; + +#define XILINX_ZYNQMP_DESC \ +{ xilinx_zynqmp, csu_dma, 1, &zynqmp_op, 0, &zynqmp_op } + +#endif /* _ZYNQMPPL_H_ */ |