diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/pcm030.h | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h new file mode 100644 index 00000000000..8acf3c7469b --- /dev/null +++ b/include/configs/pcm030.h @@ -0,0 +1,444 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2006 + * Eric Schumann, Phytec Messatechnik GmbH + * + * (C) Copyright 2009 + * Jon Smirl <jonsmirl@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny" + +/*----------------------------------------------------------------------------- +High Level Configuration Options +(easy to change) +-----------------------------------------------------------------------------*/ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ +#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ + /* FEC configuration and IDE */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/*----------------------------------------------------------------------------- +Serial console configuration +-----------------------------------------------------------------------------*/ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */ + /*define gps port conf. */ + /* register later on to */ + /*enable UART function! */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI + +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + +#if (TEXT_BASE == 0xFF000000) /* Boot low */ +#define CONFIG_SYS_LOWBOOT 1 +#endif +/* RAMBOOT will be defined automatically in memory section */ + +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ + "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" + +/*----------------------------------------------------------------------------- +Autobooting +-----------------------------------------------------------------------------*/ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */ + /* even with bootdelay=0 */ +#undef CONFIG_BOOTARGS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\ + "mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uimage=uImage-pcm030\0" \ + "oftree=oftree-pcm030.dtb\0" \ + "jffs2=root-pcm030.jffs2\0" \ + "uboot=u-boot-pcm030.bin\0" \ + "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \ + " $(mtdparts) rw\0" \ + "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \ + " rootfstype=jffs2\0" \ + "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \ + " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \ + "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \ + " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \ + "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \ + "0xfff40000\0" \ + " cp.b 0x400000 0xff040000 $(filesize)\0" \ + "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \ + "cp.b 0x400000 0xff200000 $(filesize)\0" \ + "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \ + " cp.b 0x400000 0xfff40000 $(filesize)\0" \ + "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \ + " cp.b 0x400000 0xFFF00000 $(filesize)\0" \ + "unlock=yes\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run bcmd_flash" + +/*-------------------------------------------------------------------------- +IPB Bus clocking configuration. + ---------------------------------------------------------------------------*/ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + +/*------------------------------------------------------------------------- + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + * -----------------------------------------------------------------------*/ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 +#define CONFIG_SYS_XLB_PIPELINING 1 + +/*--------------------------------------------------------------------------- + I2C configuration +---------------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/*--------------------------------------------------------------------------- + EEPROM CAT24WC32 configuration +---------------------------------------------------------------------------*/ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */ +#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_SIZE 2048 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 + +/*--------------------------------------------------------------------------- +RTC configuration +---------------------------------------------------------------------------*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +/*--------------------------------------------------------------------------- + Flash configuration +---------------------------------------------------------------------------*/ + +#define CONFIG_SYS_FLASH_BASE 0xff000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ + /* (= chip selects) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* + * Use also hardware protection. This seems required, as the BDI uses + * hardware protection. Without this, U-Boot can't work with this sectors, + * as its protection is software only by default + */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + +/*--------------------------------------------------------------------------- + Environment settings +---------------------------------------------------------------------------*/ + +/* pcm030 ships with environment is EEPROM by default */ +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ + /*beginning of the EEPROM */ +#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE + +#define CONFIG_ENV_OVERWRITE 1 + +/*----------------------------------------------------------------------------- + Memory map +-----------------------------------------------------------------------------*/ +#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */ + /* bootloader or debugger config */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used */ + /* area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes */ + /* reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------------- + Ethernet configuration +-----------------------------------------------------------------------------*/ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x01 + +/*--------------------------------------------------------------------------- + GPIO configuration + ---------------------------------------------------------------------------*/ + +/* GPIO port configuration + * + * Pin mapping: + * + * [29:31] = 01x + * PSC1_0 -> AC97 SDATA out + * PSC1_1 -> AC97 SDTA in + * PSC1_2 -> AC97 SYNC out + * PSC1_3 -> AC97 bitclock out + * PSC1_4 -> AC97 reset out + * + * [25:27] = 001 + * PSC2_0 -> CAN 1 Tx out + * PSC2_1 -> CAN 1 Rx in + * PSC2_2 -> CAN 2 Tx out + * PSC2_3 -> CAN 2 Rx in + * PSC2_4 -> GPIO (claimed for ATA reset, active low) + * + * + * [20:23] = 1100 + * PSC3_0 -> UART Tx out + * PSC3_1 -> UART Rx in + * PSC3_2 -> UART RTS (in/out FIXME) + * PSC3_3 -> UART CTS (in/out FIXME) + * PSC3_4 -> LocalPlus Bus CS6 \ + * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5] + * PSC3_6 -> dedicated SPI MOSI out (master case) + * PSC3_7 -> dedicated SPI MISO in (master case) + * PSC3_8 -> dedicated SPI SS out (master case) + * PSC3_9 -> dedicated SPI CLK out (master case) + * + * [18:19] = 01 + * USB_0 -> USB OE out + * USB_1 -> USB Tx- out + * USB_2 -> USB Tx+ out + * USB_3 -> USB RxD (in/out FIXME) + * USB_4 -> USB Rx+ in + * USB_5 -> USB Rx- in + * USB_6 -> USB PortPower out + * USB_7 -> USB speed out + * USB_8 -> USB suspend (in/out FIXME) + * USB_9 -> USB overcurrent in + * + * [17] = 0 + * USB differential mode + * + * [16] = 0 + * PCI enabled + * + * [12:15] = 0101 + * ETH_0 -> ETH Txen + * ETH_1 -> ETH TxD0 + * ETH_2 -> ETH TxD1 + * ETH_3 -> ETH TxD2 + * ETH_4 -> ETH TxD3 + * ETH_5 -> ETH Txerr + * ETH_6 -> ETH MDC + * ETH_7 -> ETH MDIO + * ETH_8 -> ETH RxDv + * ETH_9 -> ETH RxCLK + * ETH_10 -> ETH Collision + * ETH_11 -> ETH TxD + * ETH_12 -> ETH RxD0 + * ETH_13 -> ETH RxD1 + * ETH_14 -> ETH RxD2 + * ETH_15 -> ETH RxD3 + * ETH_16 -> ETH Rxerr + * ETH_17 -> ETH CRS + * + * [9:11] = 101 + * PSC6_0 -> UART RxD in + * PSC6_1 -> UART CTS (in/out FIXME) + * PSC6_2 -> UART TxD out + * PSC6_3 -> UART RTS (in/out FIXME) + * + * [2:3/6:7] = 00/11 + * TMR_0 -> ATA_CS0 out + * TMR_1 -> ATA_CS1 out + * TMR_2 -> GPIO + * TMR_3 -> GPIO + * TMR_4 -> GPIO + * TMR_5 -> GPIO + * TMR_6 -> GPIO + * TMR_7 -> GPIO + * I2C_0 -> I2C 1 Clock out + * I2C_1 -> I2C 1 IO in/out + * I2C_2 -> I2C 2 Clock out + * I2C_3 -> I2C 2 IO in/out + * + * [4] = 1 + * PSC3_5 is used as CS7 + * + * [5] = 1 + * PSC3_4 is used as CS6 + * + * [1] = 0 + * gpio_wkup_7 is GPIO + * + * [0] = 0 + * gpio_wkup_6 is GPIO + * + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12 + +/*----------------------------------------------------------------------------- + Miscellaneous configurable options +-------------------------------------------------------------------------------*/ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_DISPLAY_BOARDINFO 1 + +/*----------------------------------------------------------------------------- + Various low-level settings +-----------------------------------------------------------------------------*/ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +/* no burst access on the LPB */ +#define CONFIG_SYS_CS_BURST 0x00000000 +/* one deadcycle for the 33MHz statemachine */ +#define CONFIG_SYS_CS_DEADCYCLE 0x33333331 +/* one additional waitstate for the 33MHz statemachine */ +#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00 +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*--------------------------------------------------------------------------- + IDE/ATA stuff Supports IDE harddisk +----------------------------------------------------------------------------*/ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#define CONFIG_SYS_ATA_CS_ON_TIMER01 +#define CONFIG_IDE_RESET 1 /* reset for ide supported */ +#define CONFIG_IDE_PREINIT +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 +#define CONFIG_ATAPI 1 + +/* we enable IDE and FAT support, so we also need partition support */ +#define CONFIG_DOS_PARTITION 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN +#define OF_SOC "soc5200@f0000000" +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400" + +#endif /* __CONFIG_H */ |