summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/405_mal.h2
-rw-r--r--include/440_i2c.h3
-rw-r--r--include/asm-ppc/processor.h4
-rw-r--r--include/asm-ppc/u-boot.h3
-rw-r--r--include/configs/bamboo.h1
-rw-r--r--include/configs/pcs440ep.h1
-rw-r--r--include/configs/sequoia.h431
-rw-r--r--include/configs/yellowstone.h1
-rw-r--r--include/configs/yosemite.h1
-rw-r--r--include/linux/mtd/compat.h2
-rw-r--r--include/linux/mtd/ndfc.h67
-rw-r--r--include/ppc440.h609
-rw-r--r--include/ppc4xx_enet.h22
-rw-r--r--include/ppc_asm.tmpl2
14 files changed, 1113 insertions, 36 deletions
diff --git a/include/405_mal.h b/include/405_mal.h
index 05985869534..2a421848b4b 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,7 @@
#define MAL_ESR_PBEI 0x00000001
/* ^^ ^^ */
/* Mal IER */
-#ifdef CONFIG_440SPE
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
#define MAL_IER_PWE 0x00000020
diff --git a/include/440_i2c.h b/include/440_i2c.h
index 9c90a9e3c48..0c2bf362730 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,8 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 44b23f1eb4c..bbd3497c50e 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -728,6 +728,10 @@
#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
#define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */
#define PVR_440GX_RA 0x51B21850
#define PVR_440GX_RB 0x51B21851
#define PVR_440GX_RC 0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index f7aa55f3343..794a6d49747 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -108,7 +108,8 @@ typedef struct bd_info {
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index cd4339b5822..4961011b5cd 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -73,6 +73,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 50c1c4fd4cb..23bdfc8dfb9 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -63,6 +63,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
new file mode 100644
index 00000000000..d3fcc032aa5
--- /dev/null
+++ b/include/configs/sequoia.h
@@ -0,0 +1,431 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_SEQUOIA 1 /* Board is Sequoia */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+#define CFG_BCSR_BASE 0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#if 0
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
+#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
+#else
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+#endif
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#if 1 /* test-only */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#endif
+#if 0
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE CFG_NAND_ADDR
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+
+#ifdef CFG_ENV_IS_IN_NAND
+#define CFG_ENV_SIZE 0x4000
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=sequoia\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/sequoia/uImage\0" \
+ "kernel_addr=FE000000\0" \
+ "ramdisk_addr=FE180000\0" \
+ "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
+ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
+ "cp.b 100000 FFFA0000 60000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_M88E1111_PHY 1
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DTT | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_USB )
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_NAND 0xD0000000
+#define CFG_CPLD 0xC0000000
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000)
+#else
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+/* Memory Bank 3 (NOR-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x03017300
+#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000)
+#endif
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x24814580
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index cf42b666b00..bcafd8ba8b3 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 86a85b8a6d3..3d7b4a2f4bc 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h
index 460cd45c808..fe55087ea93 100644
--- a/include/linux/mtd/compat.h
+++ b/include/linux/mtd/compat.h
@@ -31,11 +31,13 @@
#define max_t(type,x,y) \
({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
+#ifndef BUG
#define BUG() do { \
printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
} while (0)
#define BUG_ON(condition) do { if (condition) BUG(); } while(0)
+#endif /* BUG */
#define likely(x) __builtin_expect(!!(x), 1)
#define unlikely(x) __builtin_expect(!!(x), 0)
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 00000000000..d0558a98262
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ * linux/include/linux/mtd/ndfc.h
+ *
+ * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD 0x00
+#define NDFC_ALE 0x04
+#define NDFC_DATA 0x08
+#define NDFC_ECC 0x10
+#define NDFC_BCFG0 0x30
+#define NDFC_BCFG1 0x34
+#define NDFC_BCFG2 0x38
+#define NDFC_BCFG3 0x3c
+#define NDFC_CCR 0x40
+#define NDFC_STAT 0x44
+#define NDFC_HWCTL 0x48
+#define NDFC_REVID 0x50
+
+#define NDFC_STAT_IS_READY 0x01000000
+
+#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS 4
+
+struct ndfc_controller_settings {
+ uint32_t ccr_settings;
+ uint64_t ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+ uint32_t bank_settings;
+};
+
+#endif
diff --git a/include/ppc440.h b/include/ppc440.h
index d5a9f66a419..c4a3ed54835 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -82,7 +82,10 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -151,7 +154,18 @@
#define sdr_ecid1 0x0081
#define sdr_ecid2 0x0082
#define sdr_jtag 0x00c0
+#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#define sdr_ddrdl 0x00e0
+#else
+#define sdr_cfg 0x00e0
+#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_32BITS 0x00000000 /* 32 bits */
+#define SDR_CFG_64BITS 0x01000000 /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */
+#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */
+#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
#define sdr_ebc 0x0100
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
@@ -180,6 +194,54 @@
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
+#define DDR0_00 0x00
+#define DDR0_01 0x01
+#define DDR0_02 0x02
+#define DDR0_03 0x03
+#define DDR0_04 0x04
+#define DDR0_05 0x05
+#define DDR0_06 0x06
+#define DDR0_07 0x07
+#define DDR0_08 0x08
+#define DDR0_09 0x09
+#define DDR0_10 0x0A
+#define DDR0_11 0x0B
+#define DDR0_12 0x0C
+#define DDR0_13 0x0D
+#define DDR0_14 0x0E
+#define DDR0_15 0x0F
+#define DDR0_16 0x10
+#define DDR0_17 0x11
+#define DDR0_18 0x12
+#define DDR0_19 0x13
+#define DDR0_20 0x14
+#define DDR0_21 0x15
+#define DDR0_22 0x16
+#define DDR0_23 0x17
+#define DDR0_24 0x18
+#define DDR0_25 0x19
+#define DDR0_26 0x1A
+#define DDR0_27 0x1B
+#define DDR0_28 0x1C
+#define DDR0_29 0x1D
+#define DDR0_30 0x1E
+#define DDR0_31 0x1F
+#define DDR0_32 0x20
+#define DDR0_33 0x21
+#define DDR0_34 0x22
+#define DDR0_35 0x23
+#define DDR0_36 0x24
+#define DDR0_37 0x25
+#define DDR0_38 0x26
+#define DDR0_39 0x27
+#define DDR0_40 0x28
+#define DDR0_41 0x29
+#define DDR0_42 0x2A
+#define DDR0_43 0x2B
+#define DDR0_44 0x2C
+#endif /*CONFIG_440EPX*/
+
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -787,7 +849,8 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x24 /* external bus core id reg */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PLB4 to PLB3 Bridge OUT */
#define P4P3_DCR_BASE 0x020
@@ -877,6 +940,7 @@
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
@@ -918,6 +982,178 @@
#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR_USB2D0CR 0x0320
+#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */
+#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */
+#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
+
+#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */
+#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
+#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
+
+#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
+#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
+#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+
+/* USB2 Host Control Register */
+#define SDR0_USB2H0CR 0x0340
+#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */
+#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
+#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
+#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+
+#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */
+#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */
+
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
+#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
+#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
+#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
+#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
+#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
+#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
+#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
+#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
+#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
+#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
+#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
+
+#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
+#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
+
+/* Ethernet PLL Configuration Register */
+#define SDR0_PFC2 0x4102
+#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */
+#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */
+#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */
+#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */
+
+#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */
+#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
+
+/* USB2PHY0 Control Register */
+#define SDR0_USB2PHY0CR 0x4103
+#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */
+#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
+#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
+
+#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
+#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
+#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
+
+#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */
+#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */
+#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */
+
+#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */
+#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
+#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
+
+#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
+#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
+#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */
+
+#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */
+#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
+#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */
+
+#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */
+
+#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */
+#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */
+#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */
+
+#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */
+#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */
+#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */
+
+#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
+#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+
/* CUST0 Customer Configuration Register0 */
#define SDR0_CUST0 0x4000
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
@@ -1007,27 +1243,18 @@
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+/*-----------------------------------------------------------------------------
+ | Internal SRAM
+ +----------------------------------------------------------------------------*/
+#define ISRAM0_DCR_BASE 0x380
+#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
#else
@@ -1121,7 +1348,7 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */
#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */
@@ -1423,6 +1650,46 @@
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
+#define UIC_KDA 0x08000000 /* Kasumi Data Available */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_IIC1 0x01000000 /* IIC */
+#define UIC_SPI 0x00800000 /* SPI */
+#define UIC_EPCISER 0x00400000 /* External PCI SERR */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_UD0 0x00008000 /* UDMA irq 0 */
+#define UIC_UD1 0x00004000 /* UDMA irq 1 */
+#define UIC_UD2 0x00002000 /* UDMA irq 2 */
+#define UIC_UD3 0x00001000 /* UDMA irq 3 */
+#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
+#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
+#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
+#define UIC_EIP94 0x00000100 /* Security EIP94 */
+#define UIC_ETH0 0x00000080 /* Emac 0 */
+#define UIC_ETH1 0x00000040 /* Emac 1 */
+#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
+#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_TXEOB UIC_MTE
+#define UIC_MAL_RXEOB UIC_MRE
+
#elif !defined(CONFIG_440SPE)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
@@ -1531,6 +1798,48 @@
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_U2 0x10000000 /* UART 2 */
+#define UIC_U3 0x08000000 /* UART 3 */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_NDFC 0x02000000 /* NDFC */
+#define UIC_KSLE 0x01000000 /* KASUMI slave error */
+#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
+#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
+#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
+#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
+#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
+#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
+#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
+#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
+#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
+#define UIC_RSVD0 0x00000020 /* Reserved */
+#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
+#define UIC_EIR0 0x00000008 /* External interrupt 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_EIR1 0x00000002 /* External interrupt 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_SERR UIC_MS
+#define UIC_MAL_TXDE UIC_MTDE
+#define UIC_MAL_RXDE UIC_MRDE
+#define UIC_ENET UIC_ETH0
+
#elif !defined(CONFIG_440SPE)
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
@@ -1608,6 +1917,20 @@
#define UIC_RSVD29 0x00000004 /* Reserved */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
+
+#define UIC_EIR5 0x80000000 /* External interrupt 5 */
+#define UIC_EIR6 0x40000000 /* External interrupt 6 */
+#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_EIR2 0x10000000 /* External interrupt 2 */
+#define UIC_EIR3 0x08000000 /* External interrupt 3 */
+#define UIC_DDR2 0x04000000 /* DDR2 sdram */
+#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
+#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
+#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
+#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@@ -1623,6 +1946,17 @@
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
| Universal interrupt controller interrupts
@@ -2262,7 +2596,8 @@
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
@@ -2390,11 +2725,81 @@
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
#define SDR0_MFR_ERRATA3_EN0 0x00800000
#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
+#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
+#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29)
+#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07)
+#endif
+
+#define SDR0_MFR_ECS_MASK 0x10000000
+#define SDR0_MFR_ECS_INTERNAL 0x10000000
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_SRST0 0x200
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
+#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
+#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
+#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
+#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
+#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
+#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
+#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
+#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
+#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */
+
+#define SDR0_SRST1 0x201
+#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
+#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
+#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
+#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
+#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */
+#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
+#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */
+#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
+#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
+#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
+#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
+#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
+#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
+#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
+#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
+#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+
+#else
#define SDR0_SRST_BGO 0x80000000
#define SDR0_SRST_PLB 0x40000000
@@ -2427,10 +2832,15 @@
#define SDR0_SRST_EMAC3 0x00000008
#define SDR0_SRST_RGMII 0x00000001
+#endif
+
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if !defined (CONFIG_440GX) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -2498,6 +2908,120 @@
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
#endif /* CONFIG_440GX */
+#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
+/*--------------------------------------*/
+#define CPR0_PLLC 0x40
+#define CPR0_PLLC_RST_MASK 0x80000000
+#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
+#define CPR0_PLLC_RST_PLLRESET 0x80000000
+#define CPR0_PLLC_ENG_MASK 0x40000000
+#define CPR0_PLLC_ENG_DISABLE 0x00000000
+#define CPR0_PLLC_ENG_ENABLE 0x40000000
+#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define CPR0_PLLC_SRC_MASK 0x20000000
+#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
+#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
+#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define CPR0_PLLC_SEL_MASK 0x07000000
+#define CPR0_PLLC_SEL_PLL 0x00000000
+#define CPR0_PLLC_SEL_CPU 0x01000000
+#define CPR0_PLLC_SEL_PER 0x05000000
+#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
+#define CPR0_PLLC_TUNE_MASK 0x000003FF
+#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+/*--------------------------------------*/
+#define CPR0_PLLD 0x60
+#define CPR0_PLLD_FBDV_MASK 0x1F000000
+#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define CPR0_PLLD_FWDVA_MASK 0x000F0000
+#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
+#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define CPR0_PLLD_FWDVB_MASK 0x00000700
+#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
+#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define CPR0_PLLD_LFBDV_MASK 0x0000003F
+#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMAD 0x80
+#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
+#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMBD 0xA0
+#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
+#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#if 0
+#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
+#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
+#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
+#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
+#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
+#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
+#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
+#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
+#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
+#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
+#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
+#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
+#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
+#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
+#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
+#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
+#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
+#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
+#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
+#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
+#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
+#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
+#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
+#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
+#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
+#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
+#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
+#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
+#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
+#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
+#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
+#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
+#endif
+/*--------------------------------------*/
+#define CPR0_OPBD 0xC0
+#define CPR0_OPBD_OPBDV0_MASK 0x03000000
+#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_PERD 0xE0
+#define CPR0_PERD_PERDV0_MASK 0x07000000
+#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_MALD 0x100
+#define CPR0_MALD_MALDV0_MASK 0x03000000
+#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_SPCID 0x120
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_ICFG 0x140
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_RLI_RESETCPR 0x00000000
+#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
+
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
@@ -2539,7 +3063,8 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PCI Local Configuration Registers
--------------------------------- */
@@ -2625,6 +3150,33 @@
#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* USB2.0 Device */
+#define USB2D0_BASE CFG_USB2D0_BASE
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */
+#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */
+#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */
+#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */
+#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */
+#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */
+#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */
+#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */
+#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */
+#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */
+#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
+#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */
+#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
+#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
+#endif
+
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
@@ -2640,7 +3192,8 @@
#define GPIO0_IR (GPIO0_BASE+0x1C)
#endif /* CONFIG_440GP */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index ec2e3629bb8..43c5ca451e0 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -145,12 +145,14 @@ typedef struct emac_4xx_hw_st {
#define EMAC_STACR_OC_MASK (0x00000000)
#endif
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_PFC1_EM_1000 (0x00200000)
#endif
/*ZMII Bridge Register addresses */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -163,6 +165,7 @@ typedef struct emac_4xx_hw_st {
#define ZMII_MDI0 0x80000000
/* ZMII FER Register Bit Definitions */
+#define ZMII_FER_DIS (0x0)
#define ZMII_FER_MDI (0x8)
#define ZMII_FER_SMII (0x4)
#define ZMII_FER_RMII (0x2)
@@ -197,7 +200,11 @@ typedef struct emac_4xx_hw_st {
#define ZMII_SMIISR_V(__x) ((3 - __x) * 8)
/* RGMII Register Addresses */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000)
+#else
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790)
+#endif
#define RGMII_FER (RGMII_BASE + 0x00)
#define RGMII_SSR (RGMII_BASE + 0x04)
@@ -216,7 +223,11 @@ typedef struct emac_4xx_hw_st {
#define RGMII_SSR_SP_100MBPS (0x02)
#define RGMII_SSR_SP_1000MBPS (0x04)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_SSR_V(__x) ((__x) * 8)
+#else
#define RGMII_SSR_V(__x) ((__x -2) * 8)
+#endif
/*---------------------------------------------------------------------------+
@@ -286,7 +297,8 @@ typedef struct emac_4xx_hw_st {
/* Ethernet MAC Regsiter Addresses */
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@@ -332,7 +344,9 @@ typedef struct emac_4xx_hw_st {
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 72d690ef0f8..3e47e82abad 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -312,7 +312,7 @@ label: \
lwz r3,GOT(transfer_to_handler); \
mtlr r3; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
- li r20,MSR_KERNEL; \
+ li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
rlwimi r20,r23,0,25,25; \
blrl ; \
.L_ ## label : \