summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/cm5200.h (renamed from include/configs/cm1_qp1.h)48
1 files changed, 26 insertions, 22 deletions
diff --git a/include/configs/cm1_qp1.h b/include/configs/cm5200.h
index effa41c052..76628560e5 100644
--- a/include/configs/cm1_qp1.h
+++ b/include/configs/cm5200.h
@@ -29,7 +29,7 @@
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
-#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */
+#define CONFIG_CM5200 1 /* ... on CM5200 platform */
/*
@@ -63,6 +63,7 @@
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */
/*
@@ -103,7 +104,6 @@
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "hostname=cm1_qp1\0" \
"netmask=255.255.0.0\0" \
"ipaddr=192.168.160.33\0" \
"serverip=192.168.1.1\0" \
@@ -116,13 +116,14 @@
"fdt_addr_flash=fc0a0000\0" \
"ramdisk_addr=500000\0" \
"rootpath=/opt/eldk-4.1/ppc_6xx\0" \
- "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \
- "bootfile=/tftpboot/cm1_qp1/uImage\0" \
- "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \
+ "u-boot=/tftpboot/cm5200/u-boot.bin\0" \
+ "bootfile_fdt=/tftpboot/cm5200/uImage\0" \
+ "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
- "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \
+ "update=prot off fc000000 +${filesize}; " \
+ "era fc000000 +${filesize}; " \
"cp.b ${u-boot_addr} fc000000 ${filesize}; " \
- "prot on fc000000 fc05ffff\0" \
+ "prot on fc000000 +${filesize}\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \
@@ -174,6 +175,8 @@
#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_BOARD_TYPES 1 /* we use board_type */
+
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_BASE TEXT_BASE
@@ -181,8 +184,21 @@
#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE 0xfc000000
+/* we need these despite using CFI */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
+#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
+
+
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT 1
+#undef CFG_LOWBOOT
#endif
@@ -215,24 +231,13 @@
#define SDRAM_CONFIG2 0x8EE70000
-/*
- * Flash configuration
- */
-#define CFG_FLASH_CFI 1
-#define CFG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_BASE TEXT_BASE
-/* we need these despite using CFI */
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
-#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
-
/*
* MTD configuration
*/
#define CONFIG_JFFS2_CMDLINE 1
-#define MTDIDS_DEFAULT "nor0=cm1qp1-0"
-#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \
+#define MTDIDS_DEFAULT "nor0=cm5200-0"
+#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \
"384k(uboot),128k(env)," \
"128k(redund_env),128k(dtb)," \
"2m(kernel),27904k(rootfs)," \
@@ -347,9 +352,8 @@
/*
* Flat Device Tree support
*/
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
#define OF_TBCLK (bd->bi_busfreq / 4)