diff options
Diffstat (limited to 'include')
30 files changed, 436 insertions, 81 deletions
diff --git a/include/axp152.h b/include/axp152.h index 9d205f8d3af..c3aef772104 100644 --- a/include/axp152.h +++ b/include/axp152.h @@ -15,6 +15,17 @@ enum axp152_reg { #define AXP152_POWEROFF (1 << 7) +/* For axp_gpio.c */ +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x91 +#define AXP_GPIO2_CTRL 0x92 +#define AXP_GPIO3_CTRL 0x93 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x97 +#define AXP_GPIO_STATE_OFFSET 0 + int axp152_set_dcdc2(int mvolt); int axp152_set_dcdc3(int mvolt); int axp152_set_dcdc4(int mvolt); diff --git a/include/axp209.h b/include/axp209.h index d36da41a5e1..6170202b4c7 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -18,11 +18,6 @@ enum axp209_reg { AXP209_IRQ_ENABLE5 = 0x44, AXP209_IRQ_STATUS5 = 0x4c, AXP209_SHUTDOWN = 0x32, - AXP209_GPIO0_CTRL = 0x90, - AXP209_GPIO1_CTRL = 0x92, - AXP209_GPIO2_CTRL = 0x93, - AXP209_GPIO_STATE = 0x94, - AXP209_GPIO3_CTRL = 0x95, }; #define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) @@ -33,16 +28,17 @@ enum axp209_reg { #define AXP209_POWEROFF (1 << 7) -#define AXP209_GPIO_OUTPUT_LOW 0x00 /* Drive pin low */ -#define AXP209_GPIO_OUTPUT_HIGH 0x01 /* Drive pin high */ -#define AXP209_GPIO_INPUT 0x02 /* Float pin */ - -/* GPIO3 is different from the others */ -#define AXP209_GPIO3_OUTPUT_LOW 0x00 /* Drive pin low, Output mode */ -#define AXP209_GPIO3_OUTPUT_HIGH 0x02 /* Float pin, Output mode */ -#define AXP209_GPIO3_INPUT 0x06 /* Float pin, Input mode */ - -#define AXP_GPIO +/* For axp_gpio.c */ +#define AXP_POWER_STATUS 0x00 +#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x92 +#define AXP_GPIO2_CTRL 0x93 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x94 +#define AXP_GPIO_STATE_OFFSET 4 extern int axp209_set_dcdc2(int mvolt); extern int axp209_set_dcdc3(int mvolt); @@ -52,8 +48,3 @@ extern int axp209_set_ldo4(int mvolt); extern int axp209_init(void); extern int axp209_poweron_by_dc(void); extern int axp209_power_button(void); - -extern int axp_gpio_direction_input(unsigned int pin); -extern int axp_gpio_direction_output(unsigned int pin, unsigned int val); -extern int axp_gpio_get_value(unsigned int pin); -extern int axp_gpio_set_value(unsigned int pin, unsigned int val); diff --git a/include/axp221.h b/include/axp221.h index 0aac04dfebd..9c871623a87 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -6,17 +6,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#define AXP221_CHIP_ADDR 0x68 -#define AXP221_CTRL_ADDR 0x3e -#define AXP221_INIT_DATA 0x3e - -#define AXP223_DEVICE_ADDR 0x3a3 -#define AXP223_RUNTIME_ADDR 0x2d - /* Page 0 addresses */ -#define AXP221_POWER_STATUS 0x00 -#define AXP221_POWER_STATUS_VBUS_AVAIL (1 << 5) -#define AXP221_POWER_STATUS_VBUS_USABLE (1 << 4) #define AXP221_CHIP_ID 0x03 #define AXP221_OUTPUT_CTRL1 0x10 #define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0) @@ -62,7 +52,16 @@ /* Page 1 addresses */ #define AXP221_SID 0x20 -#define AXP_GPIO +/* For axp_gpio.c */ +#define AXP_POWER_STATUS 0x00 +#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x92 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x94 +#define AXP_GPIO_STATE_OFFSET 0 int axp221_set_dcdc1(unsigned int mvolt); int axp221_set_dcdc2(unsigned int mvolt); @@ -79,8 +78,3 @@ int axp221_set_aldo3(unsigned int mvolt); int axp221_set_eldo(int eldo_num, unsigned int mvolt); int axp221_init(void); int axp221_get_sid(unsigned int *sid); - -int axp_gpio_direction_input(unsigned int pin); -int axp_gpio_direction_output(unsigned int pin, unsigned int val); -int axp_gpio_get_value(unsigned int pin); -int axp_gpio_set_value(unsigned int pin, unsigned int val); diff --git a/include/common.h b/include/common.h index cde3474b187..d4d704a6af7 100644 --- a/include/common.h +++ b/include/common.h @@ -192,22 +192,8 @@ int cpu_init(void); /* */ phys_size_t initdram (int); -int display_options (void); -/** - * print_size() - Print a size with a suffic - * - * print sizes as "xxx KiB", "xxx.y KiB", "xxx MiB", "xxx.y MiB", - * xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string - * (like "\n") - * - * @size: Size to print - * @suffix String to print after the size - */ -void print_size(uint64_t size, const char *suffix); - -int print_buffer(ulong addr, const void *data, uint width, uint count, - uint linelen); +#include <display_options.h> /* common/main.c */ void main_loop (void); diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h index 52657878c6f..f2d798a52f0 100644 --- a/include/configs/chromebook_link.h +++ b/include/configs/chromebook_link.h @@ -16,4 +16,7 @@ #include <configs/x86-common.h> #include <configs/x86-chromebook.h> +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0x003f8000 + #endif /* __CONFIG_H */ diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h index df32f2ac528..4fef433252c 100644 --- a/include/configs/crownbay.h +++ b/include/configs/crownbay.h @@ -15,6 +15,7 @@ #define CONFIG_SYS_MONITOR_LEN (1 << 20) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_MISC_INIT #define CONFIG_NR_DRAM_BANKS 1 @@ -61,10 +62,6 @@ #undef CONFIG_CFB_CONSOLE /* Environment configuration */ -#undef CONFIG_ENV_IS_NOWHERE -#undef CONFIG_ENV_SIZE -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0 diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h new file mode 100644 index 00000000000..12a24ced1ba --- /dev/null +++ b/include/configs/db-88f6820-gp.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_DB_88F6820_GP_H +#define _CONFIG_DB_88F6820_GP_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_ARMADA_XP /* SOC Family Name */ +#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ + +#define CONFIG_SYS_L2_PL310 + +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#define CONFIG_SYS_TEXT_BASE 0x04000000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include <config_cmd_default.h> +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#define CONFIG_CMD_TIME + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#define CONFIG_SPI_FLASH_STMICRO + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define CONFIG_PHY_ADDR { 1, 0 } +#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#endif /* _CONFIG_DB_88F6820_GP_H */ diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 4dd7b11fb4a..77d34080fd8 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -53,7 +53,7 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_BASE_ADDR 0x10 +#define CONFIG_PHY_ADDR { 0x10, 0x11, 0x12, 0x13 } #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ #define CONFIG_RESET_PHY_R @@ -100,7 +100,6 @@ #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/galileo.h b/include/configs/galileo.h index 288acf30f1b..f780b8fa512 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -63,10 +63,6 @@ #define CONFIG_PHYLIB /* Environment configuration */ -#undef CONFIG_ENV_IS_NOWHERE -#undef CONFIG_ENV_SIZE -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0 diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index e9096234af6..d8811a47cdc 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -53,7 +53,7 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_BASE_ADDR 0x0 +#define CONFIG_PHY_ADDR { 0x0, 0x1, 0x2, 0x3 } #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ #define CONFIG_RESET_PHY_R @@ -100,7 +100,6 @@ #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index 823e051eb11..2a1915d8722 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -42,7 +42,7 @@ #define CONFIG_SCSI_DEV_LIST \ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA} -#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MMC #define CONFIG_SDHCI @@ -69,4 +69,8 @@ /* Avoid a warning in the Realtek Ethernet driver */ #define CONFIG_SYS_CACHELINE_SIZE 16 +/* Environment in SPI flash is unsupported for now */ +#undef CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_IS_NOWHERE + #endif /* __CONFIG_H */ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 721b75daee2..51436da64e0 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -57,6 +57,7 @@ 115200,230400, 460800, 921600 } /* auto boot */ #define CONFIG_BOOTDELAY 3 /* default enable autoboot */ +#define CONFIG_PREBOOT /* * For booting Linux, the board info and command line data diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 7cd5c69d3a8..ea079eb5f78 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -17,6 +17,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif +#define CONFIG_SUNXI_USB_PHYS 3 + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index e0470d4282c..d2576599036 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -17,6 +17,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif +#define CONFIG_SUNXI_USB_PHYS 2 + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 617c1cdfdec..2c24bd2312d 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -20,6 +20,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif +#define CONFIG_SUNXI_USB_PHYS 3 + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 7fa7cec2441..56101a9ffcd 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -18,6 +18,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif +#define CONFIG_SUNXI_USB_PHYS 3 + #define CONFIG_ARMV7_PSCI 1 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_TIMER_CLK_FREQ 24000000 diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 79796d75d34..7111c635c15 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -18,6 +18,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif +#define CONFIG_SUNXI_USB_PHYS 2 + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 365d9a50b57..c8ebb54f374 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -41,7 +41,7 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL) # define CONFIG_DW_SERIAL #endif @@ -195,14 +195,15 @@ #define CONFIG_SPL_I2C_SUPPORT #endif -#define CONFIG_SYS_I2C #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ defined CONFIG_I2C4_ENABLE +#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI -#endif #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 0x7f +#define CONFIG_CMD_I2C +#endif #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) #define CONFIG_SYS_I2C_SOFT @@ -222,8 +223,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ #endif -#define CONFIG_CMD_I2C - /* PMU */ #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER #define CONFIG_SPL_POWER_SUPPORT @@ -284,7 +283,9 @@ extern int soft_i2c_gpio_scl; /* Ethernet support */ #ifdef CONFIG_SUNXI_EMAC +#define CONFIG_PHY_ADDR 1 #define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHYLIB #endif #ifdef CONFIG_SUNXI_GMAC @@ -401,7 +402,7 @@ extern int soft_i2c_gpio_scl; #define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" \ BOOTENV diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 9571c656be0..3e21e093587 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -20,6 +20,7 @@ #define CONFIG_PHYSMEM #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_LAST_STAGE_INIT #define CONFIG_LMB #define CONFIG_OF_LIBFDT @@ -207,7 +208,7 @@ /*----------------------------------------------------------------------- * Environment configuration */ -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x01000 /*----------------------------------------------------------------------- diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index b83e037f6f5..926b3815806 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -34,7 +34,6 @@ /* DCC driver */ #if defined(CONFIG_ZYNQ_DCC) # define CONFIG_ARM_DCC -# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #else # define CONFIG_ZYNQ_SERIAL #endif diff --git a/include/cpu.h b/include/cpu.h new file mode 100644 index 00000000000..34c60bcbaa1 --- /dev/null +++ b/include/cpu.h @@ -0,0 +1,84 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CPU_H +#define __CPU_H + +/** + * struct cpu_platdata - platform data for a CPU + * + * This can be accessed with dev_get_parent_platdata() for any UCLASS_CPU + * device. + * + * @cpu_id: Platform-specific way of identifying the CPU. + */ +struct cpu_platdata { + int cpu_id; +}; + +/* CPU features - mostly just a placeholder for now */ +enum { + CPU_FEAT_L1_CACHE = 0, /* Supports level 1 cache */ + CPU_FEAT_MMU = 1, /* Supports virtual memory */ + + CPU_FEAT_COUNT, +}; + +/** + * struct cpu_info - Information about a CPU + * + * @cpu_freq: Current CPU frequency in Hz + * @features: Flags for supported CPU features + */ +struct cpu_info { + ulong cpu_freq; + ulong features; +}; + +struct cpu_ops { + /** + * get_desc() - Get a description string for a CPU + * + * @dev: Device to check (UCLASS_CPU) + * @buf: Buffer to place string + * @size: Size of string space + * @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error + */ + int (*get_desc)(struct udevice *dev, char *buf, int size); + + /** + * get_info() - Get information about a CPU + * + * @dev: Device to check (UCLASS_CPU) + * @info: Returns CPU info + * @return 0 if OK, -ve on error + */ + int (*get_info)(struct udevice *dev, struct cpu_info *info); +}; + +#define cpu_get_ops(dev) ((struct cpu_ops *)(dev)->driver->ops) + +/** + * cpu_get_desc() - Get a description string for a CPU + * + * @dev: Device to check (UCLASS_CPU) + * @buf: Buffer to place string + * @size: Size of string space + * @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error + */ +int cpu_get_desc(struct udevice *dev, char *buf, int size); + +/** + * cpu_get_info() - Get information about a CPU + * + * @dev: Device to check (UCLASS_CPU) + * @info: Returns CPU info + * @return 0 if OK, -ve on error + */ +int cpu_get_info(struct udevice *dev, struct cpu_info *info); + +#endif diff --git a/include/display_options.h b/include/display_options.h new file mode 100644 index 00000000000..ac44c459b3b --- /dev/null +++ b/include/display_options.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DISPLAY_OPTIONS_H +#define __DISPLAY_OPTIONS_H + +/** + * print_size() - Print a size with a suffix + * + * Print sizes as "xxx KiB", "xxx.y KiB", "xxx MiB", "xxx.y MiB", + * xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string + * (like "\n") + * + * @size: Size to print + * @suffix String to print after the size + */ +void print_size(uint64_t size, const char *suffix); + +/** + * print_freq() - Print a frequency with a suffix + * + * Print frequencies as "x.xx GHz", "xxx KHz", etc as needed; allow for + * optional trailing string (like "\n") + * + * @freq: Frequency to print in Hz + * @suffix String to print after the frequency + */ +void print_freq(uint64_t freq, const char *suffix); + +/** + * print_buffer() - Print data buffer in hex and ascii form + * + * Data reads are buffered so that each memory address is only read once. + * This is useful when displaying the contents of volatile registers. + * + * @addr: Starting address to display at start of line + * @data: pointer to data buffer + * @width: data value width. May be 1, 2, or 4. + * @count: number of values to display + * @linelen: Number of values to print per line; specify 0 for default length + */ +int print_buffer(ulong addr, const void *data, uint width, uint count, + uint linelen); + +/** + * display_options() - display the version string / build tag + * + * This displays the U-Boot version string. If a build tag is available this + * is displayed also. + */ +int display_options(void); + +#endif diff --git a/include/dm/lists.h b/include/dm/lists.h index 1b50af9f23c..61610e69aa5 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -73,4 +73,20 @@ int lists_bind_fdt(struct udevice *parent, const void *blob, int offset, int device_bind_driver(struct udevice *parent, const char *drv_name, const char *dev_name, struct udevice **devp); +/** + * device_bind_driver_to_node() - bind a device to a driver for a node + * + * This binds a new device to a driver for a given device tree node. This + * should only be needed if the node lacks a compatible strings. + * + * @parent: Parent device + * @drv_name: Name of driver to attach to this parent + * @dev_name: Name of the new device thus created + * @node: Device tree node + * @devp: Returns the newly bound device + */ +int device_bind_driver_to_node(struct udevice *parent, const char *drv_name, + const char *dev_name, int node, + struct udevice **devp); + #endif diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index fddfd35f1fb..395e25a4313 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -45,6 +45,7 @@ enum uclass_id { UCLASS_USB_HUB, /* USB hub */ UCLASS_USB_DEV_GENERIC, /* USB generic device */ UCLASS_MASS_STORAGE, /* Mass storage device */ + UCLASS_CPU, /* CPU, typically part of an SoC */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/dt-bindings/dma/sun4i-a10.h b/include/dt-bindings/dma/sun4i-a10.h new file mode 100644 index 00000000000..8caba9ef7e9 --- /dev/null +++ b/include/dt-bindings/dma/sun4i-a10.h @@ -0,0 +1,56 @@ +/* + * Copyright 2014 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __DT_BINDINGS_DMA_SUN4I_A10_H_ +#define __DT_BINDINGS_DMA_SUN4I_A10_H_ + +#define SUN4I_DMA_NORMAL 0 +#define SUN4I_DMA_DEDICATED 1 + +#endif /* __DT_BINDINGS_DMA_SUN4I_A10_H_ */ diff --git a/include/dt-bindings/pinctrl/sun4i-a10.h b/include/dt-bindings/pinctrl/sun4i-a10.h new file mode 100644 index 00000000000..f7553c143b4 --- /dev/null +++ b/include/dt-bindings/pinctrl/sun4i-a10.h @@ -0,0 +1,62 @@ +/* + * Copyright 2014 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ +#define __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ + +#define SUN4I_PINCTRL_10_MA 0 +#define SUN4I_PINCTRL_20_MA 1 +#define SUN4I_PINCTRL_30_MA 2 +#define SUN4I_PINCTRL_40_MA 3 + +#define SUN4I_PINCTRL_NO_PULL 0 +#define SUN4I_PINCTRL_PULL_UP 1 +#define SUN4I_PINCTRL_PULL_DOWN 2 + +#endif /* __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ */ diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h new file mode 100644 index 00000000000..b5e6b0069ac --- /dev/null +++ b/include/dt-bindings/thermal/thermal.h @@ -0,0 +1,17 @@ +/* + * This header provides constants for most thermal bindings. + * + * Copyright (C) 2013 Texas Instruments + * Eduardo Valentin <eduardo.valentin@ti.com> + * + * GPLv2 only + */ + +#ifndef _DT_BINDINGS_THERMAL_THERMAL_H +#define _DT_BINDINGS_THERMAL_THERMAL_H + +/* On cooling devices upper and lower limits */ +#define THERMAL_NO_LIMIT (~0) + +#endif + diff --git a/include/mmc.h b/include/mmc.h index 2ad0f191c3b..dd98b3b8acf 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -55,13 +55,12 @@ #define MMC_MODE_4BIT (1 << 2) #define MMC_MODE_8BIT (1 << 3) #define MMC_MODE_SPI (1 << 4) -#define MMC_MODE_HC (1 << 5) -#define MMC_MODE_DDR_52MHz (1 << 6) +#define MMC_MODE_DDR_52MHz (1 << 5) #define SD_DATA_4BIT 0x00040000 #define IS_SD(x) ((x)->version & SD_VERSION_SD) -#define IS_MMC(x) ((x)->version & SD_VERSION_MMC) +#define IS_MMC(x) ((x)->version & MMC_VERSION_MMC) #define MMC_DATA_READ 1 #define MMC_DATA_WRITE 2 @@ -70,8 +69,7 @@ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 -#define IN_PROGRESS -20 /* operation is in progress */ -#define SWITCH_ERR -21 /* Card reports failure to switch mode */ +#define SWITCH_ERR -20 /* Card reports failure to switch mode */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -356,7 +354,6 @@ struct mmc { char op_cond_pending; /* 1 if we are waiting on an op_cond command */ char init_in_progress; /* 1 if we have done mmc_start_init() */ char preinit; /* start init as early as possible */ - uint op_cond_response; /* the response byte from the last op_cond */ int ddr_mode; }; diff --git a/include/netdev.h b/include/netdev.h index d96e1dabf98..662d1735db0 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -80,8 +80,6 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); -int sunxi_emac_initialize(bd_t *bis); -int sunxi_gmac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); diff --git a/include/smsc_lpc47m.h b/include/smsc_lpc47m.h index bffd622f0fd..32b069df6f0 100644 --- a/include/smsc_lpc47m.h +++ b/include/smsc_lpc47m.h @@ -13,7 +13,8 @@ * * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number. * @iobase: Processor I/O port address to assign to this serial device. + * @irq: Processor IRQ number to assign to this serial device. */ -void lpc47m_enable_serial(u16 dev, u16 iobase); +void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq); #endif /* _SMSC_LPC47M_H_ */ |