diff options
Diffstat (limited to 'include')
77 files changed, 2362 insertions, 2154 deletions
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 4b39844549f..3e32eee92c3 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -90,9 +90,6 @@ extern void _start(void); extern ulong _rel_dyn_start_ofs; extern ulong _rel_dyn_end_ofs; -/* Start/end of the relocation symbol table, as an offset from _start */ -extern ulong _dynsym_start_ofs; - /* End of the region to be relocated, as an offset form _start */ extern ulong _image_copy_end_ofs; diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a9aa8baf0dc..a4bfdac18e0 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -61,14 +61,6 @@ typedef struct bd_info { #if defined(CONFIG_MPC83xx) unsigned long bi_immrbar; #endif -#if defined(CONFIG_MPC8220) - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_inpfreq; /* Input Freq, In MHz */ - unsigned long bi_pcifreq; /* PCI Freq, in MHz */ - unsigned long bi_pevfreq; /* PEV Freq, in MHz */ - unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ - unsigned long bi_vcofreq; /* VCO Freq, in MHz */ -#endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ diff --git a/include/atmel_mci.h b/include/atmel_mci.h index c711881276b..31c4569c8fb 100644 --- a/include/atmel_mci.h +++ b/include/atmel_mci.h @@ -52,6 +52,8 @@ typedef struct atmel_mci { u32 ier; /* 0x44 */ u32 idr; /* 0x48 */ u32 imr; /* 0x4c */ + u32 reserved[43]; + u32 version; } atmel_mci_t; #endif /* __ASSEMBLY__ */ diff --git a/include/bootstage.h b/include/bootstage.h index 3b2216b8a8c..6dc0422bac4 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -221,7 +221,7 @@ enum bootstage_id { */ ulong timer_get_boot_us(void); -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) /* * Board code can implement show_boot_progress() if needed. * @@ -233,10 +233,21 @@ void show_boot_progress(int val); #define show_boot_progress(val) do {} while (0) #endif -#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ + !defined(USE_HOSTCC) /* This is the full bootstage implementation */ /** + * Relocate existing bootstage records + * + * Call this after relocation has happened and after malloc has been initted. + * We need to copy any pointers in bootstage records that were added pre- + * relocation, since memory can be overritten later. + * @return Always returns 0, to indicate success + */ +int bootstage_relocate(void); + +/** * Add a new bootstage record * * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) @@ -257,6 +268,19 @@ ulong bootstage_error(enum bootstage_id id); ulong bootstage_mark_name(enum bootstage_id id, const char *name); /** + * Mark a time stamp in the given function and line number + * + * See BOOTSTAGE_MARKER() for a convenient macro. + * + * @param file Filename to record (NULL if none) + * @param func Function name to record + * @param linenum Line number to record + * @return recorded time stamp + */ +ulong bootstage_mark_code(const char *file, const char *func, + int linenum); + +/** * Mark the start of a bootstage activity. The end will be marked later with * bootstage_accum() and at that point we accumulate the time taken. Calling * this function turns the given id into a accumulator rather than and @@ -315,11 +339,22 @@ int bootstage_stash(void *base, int size); int bootstage_unstash(void *base, int size); #else +static inline ulong bootstage_add_record(enum bootstage_id id, + const char *name, int flags, ulong mark) +{ + return 0; +} + /* * This is a dummy implementation which just calls show_boot_progress(), * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined */ +static inline int bootstage_relocate(void) +{ + return 0; +} + static inline ulong bootstage_mark(enum bootstage_id id) { show_boot_progress(id); @@ -337,6 +372,22 @@ static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) return 0; } +static inline ulong bootstage_mark_code(const char *file, const char *func, + int linenum) +{ + return 0; +} + +static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) +{ + return 0; +} + +static inline uint32_t bootstage_accum(enum bootstage_id id) +{ + return 0; +} + static inline int bootstage_stash(void *base, int size) { return 0; /* Pretend to succeed */ @@ -348,4 +399,8 @@ static inline int bootstage_unstash(void *base, int size) } #endif /* CONFIG_BOOTSTAGE */ +/* Helper macro for adding a bootstage to a line of code */ +#define BOOTSTAGE_MARKER() \ + bootstage_mark_code(__FILE__, __func__, __LINE__) + #endif diff --git a/include/common.h b/include/common.h index 8a1f3e406d9..e682bd82377 100644 --- a/include/common.h +++ b/include/common.h @@ -71,8 +71,6 @@ typedef volatile unsigned char vu_char; #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_MPC8220) -#include <asm/immap_8220.h> #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -199,18 +197,35 @@ typedef void (interrupt_handler_t)(void *); * General Purpose Utilities */ #define min(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x < __y) ? __x : __y; }) #define max(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) #define MIN(x, y) min(x, y) #define MAX(x, y) max(x, y) +#define min3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x < __y ? (__x < __z ? __x : __z) : \ + (__y < __z ? __y : __z); }) + +#define max3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x > __y ? (__x > __z ? __x : __z) : \ + (__y > __z ? __y : __z); }) + +#define MIN3(x, y, z) min3(x, y, z) +#define MAX3(x, y, z) max3(x, y, z) + /* * Return the absolute value of a number. * @@ -323,6 +338,16 @@ int update_flash_size(int flash_size); */ void board_show_dram(ulong size); +/** + * arch_fixup_memory_node() - Write arch-specific memory information to fdt + * + * Defined in arch/$(ARCH)/lib/bootm.c + * + * @blob: FDT blob to write to + * @return 0 if ok, or -ve FDT_ERR_... on failure + */ +int arch_fixup_memory_node(void *blob); + /* common/flash.c */ void flash_perror (int); @@ -556,7 +581,6 @@ void trap_init (ulong); defined (CONFIG_74x) || \ defined (CONFIG_75x) || \ defined (CONFIG_74xx) || \ - defined (CONFIG_MPC8220) || \ defined (CONFIG_MPC85xx) || \ defined (CONFIG_MPC86xx) || \ defined (CONFIG_MPC83xx) @@ -648,9 +672,6 @@ int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif -#if defined(CONFIG_MPC8220) -int prt_mpc8220_clks (void); -#endif #ifdef CONFIG_4xx ulong get_OPB_freq (void); ulong get_PCI_freq (void); diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h deleted file mode 100644 index 39c29ecc222..00000000000 --- a/include/configs/Alaska8220.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_ALASKA8220 1 /* ... on Alaska board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME Alaska -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* - * JFFS2 partitions - */ - -/* No command line, one static partition */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 -*/ - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=alaska-0" -#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b09119a2f24..1c9d08e2564 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -36,7 +36,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -528,6 +527,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SF_DEFAULT_MODE 0 /* + * MAPLE + */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull +#else +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 +#endif + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -623,7 +631,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_FMAN_ENET #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +/*B4860 QDS AMC2PEX-2S default PHY_ADDR */ +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ +#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ + #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 76b3ca68986..6dd5c0d53a9 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,7 +25,6 @@ */ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_PPC_T4240 #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h deleted file mode 100644 index 5f925b328c3..00000000000 --- a/include/configs/Yukon8220.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_YUKON8220 1 /* ... on Yukon board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME yukon -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CONFIG_SYS_JFFS2_FIRST_BANK -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#endif -#ifndef CONFIG_SYS_JFFS2_NUM_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 -#endif -#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index f019134216a..7cc3ef24acc 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -60,7 +60,7 @@ "rdaddr=0x81000000\0" \ "bootdir=/boot\0" \ "bootfile=uImage\0" \ - "fdtfile=\0" \ + "fdtfile=undefined\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ @@ -145,8 +145,9 @@ "if test $board_name = A33515BB; then " \ "setenv fdtfile am335x-evm.dtb; fi; " \ "if test $board_name = A335X_SK; then " \ - "setenv fdtfile am335x-evmsk.dtb; fi\0" \ - + "setenv fdtfile am335x-evmsk.dtb; fi " \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" #endif #define CONFIG_BOOTCOMMAND \ @@ -305,8 +306,14 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +/* + * Place the image at the start of the ROM defined image space and leave + * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ +#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ebcc69afa3e..43289446b1f 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,6 +105,8 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1 /* @@ -128,6 +130,24 @@ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif +/* + * The (arm)linux board id set by generic code depending on configured board + * (see boards.cfg for different boards) + */ +#ifdef CONFIG_AT91SAM9G20 + /* the sam9g20 variants have two different board ids */ +# ifdef CONFIG_AT91SAM9G20EK_2MMC + /* we may be setup for the 2MMC variant of at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC +# else + /* or the normal at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK +# endif +#else + /* otherwise default to good old at91sam9260ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK +#endif + /* DataFlash */ #ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI @@ -158,6 +178,18 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 @@ -170,13 +202,11 @@ /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -211,7 +241,7 @@ "mtdparts=atmel_nand:-(root) " \ "rw rootfstype=jffs2" -#else /* CONFIG_SYS_USE_NANDFLASH */ +#elif defined(CONFIG_SYS_USE_NANDFLASH) /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 @@ -226,6 +256,22 @@ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#else /* CONFIG_SYS_USE_MMC */ +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_BOOTCOMMAND \ + "fatload mmc 0:1 0x22000000 uImage; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h new file mode 100644 index 00000000000..8d2673dacbc --- /dev/null +++ b/include/configs/at91sam9n12ek.h @@ -0,0 +1,232 @@ +/* + * (C) Copyright 2013 Atmel Corporation. + * Josh Wu <josh.wu@atmel.com> + * + * Configuation settings for the AT91SAM9N12-EK boards. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __AT91SAM9N12_CONFIG_H_ +#define __AT91SAM9N12_CONFIG_H_ + +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +#define CONFIG_ARM926EJS +#define CONFIG_AT91FAMILY + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ +#define CONFIG_SYS_HZ 1000 + +/* Misc CPU related */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_OF_LIBFDT + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA + +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +/* + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, + * leaving the correct space for initial global data structure above + * that address while providing maximum stack area below. + */ +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5 + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 2 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 +#endif + +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ + "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" + +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x26e00000 + +#ifdef CONFIG_SYS_USE_SPIFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ + "bootm 0x22000000" + +#elif defined(CONFIG_SYS_USE_NANDFLASH) + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "nand read 0x21000000 0x180000 0x080000;" \ + "nand read 0x22000000 0x200000 0x400000;" \ + "bootm 0x22000000 - 0x21000000" + +#else /* CONFIG_SYS_USE_MMC */ + +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ + "fatload mmc 0:1 0x21000000 dtb;" \ + "fatload mmc 0:1 0x22000000 uImage;" \ + "bootm 0x22000000 - 0x21000000" + +#endif + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ + + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#endif diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 058da4fa13b..165de137531 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -71,6 +71,20 @@ #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7b51b53dc54..db1b6136f3a 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -149,10 +149,15 @@ #define CONFIG_MUSB_TIMEOUT 100000 #endif +/* Don't waste time transferring a logo over the UART */ +#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) +/*# define CONFIG_VIDEO*/ +#endif /* * Video Settings */ +#ifdef CONFIG_VIDEO #ifdef CONFIG_BF527_EZKIT_REV_2_1 # define CONFIG_LQ035Q1_SPI_BUS 0 # define CONFIG_LQ035Q1_SPI_CS 7 @@ -166,7 +171,7 @@ #else # define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h> #endif - +#endif /* CONFIG_VIDEO */ /* * Misc Settings @@ -175,11 +180,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -/* Don't waste time transferring a logo over the UART */ -#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -#endif - /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 05029d497bb..25cebf880fa 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -52,7 +52,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) @@ -135,15 +135,17 @@ /* * SPI_MMC Settings */ +#define CONFIG_MMC_SPI +#ifdef CONFIG_MMC_SPI #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_SPI - +#endif /* * NAND Settings */ /* #define CONFIG_NAND_PLAT */ +#ifdef CONFIG_NAND_PLAT #define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -158,7 +160,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 - +#endif /* CONFIG_NAND_PLAT */ /* * CF-CARD IDE-HDD Support diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e6b05db09d7..da5f0294351 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -120,18 +120,16 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #endif - /* * NAND Settings */ -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_BFIN_NFC_BOOTROM_ECC #define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * I2C Settings @@ -184,13 +182,12 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#ifndef __ADSPBF542__ -/* Don't waste time transferring a logo over the UART */ -# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h> -# endif -# define CONFIG_DEB_DMA_URGENT +#define CONFIG_ADI_GPIO2 + +#undef CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h > +#define CONFIG_DEB_DMA_URGENT #endif /* Define if want to do post memory test */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1a9d27ea2a0..6ee1e4c869d 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -98,6 +98,11 @@ */ #define CONFIG_UART_CONSOLE 0 +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 02149fa94df..1a43e1b433e 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -144,10 +144,13 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) #define CONFIG_BFIN_SOFT_SWITCH +#define CONFIG_ADI_GPIO2 + #if 0 #define CONFIG_UART_MEM 1024 #undef CONFIG_UART_CONSOLE @@ -155,6 +158,13 @@ #undef CONFIG_UART_CONSOLE_IS_JTAG #endif +#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) + +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index d3ae3a71cd7..e1a6fe3056c 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -111,8 +111,8 @@ #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif -#ifndef CONFIG_DEBUG_EARLY_SERIAL -# define CONFIG_SYS_BFIN_UART +#ifdef CONFIG_UART_CONSOLE +# define CONFIG_BFIN_SERIAL #endif /* @@ -317,5 +317,13 @@ #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #define CONFIG_MONITOR_IS_IN_RAM - +#ifdef CONFIG_HW_WATCHDOG +# define CONFIG_BFIN_WATCHDOG +# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 +# endif +#endif +#ifndef CONFIG_ADI_GPIO2 +# define CONFIG_ADI_GPIO1 +#endif #endif diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 6a991752114..fd46083581a 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -70,6 +70,20 @@ #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 5bacc77bb50..be04a7548a7 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -38,7 +38,6 @@ #define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_VSNPRINTF -#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT @@ -49,6 +48,19 @@ #define CONFIG_OF_SEPARATE #define CONFIG_DEFAULT_DEVICE_TREE link +#define CONFIG_BOOTSTAGE +#define CONFIG_BOOTSTAGE_REPORT +#define CONFIG_BOOTSTAGE_FDT +#define CONFIG_CMD_BOOTSTAGE +/* Place to stash bootstage data from first-stage U-Boot */ +#define CONFIG_BOOTSTAGE_STASH 0x0110f000 +#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc +#define CONFIG_BOOTSTAGE_USER_COUNT 60 + +#define CONFIG_LZO +#undef CONFIG_ZLIB +#undef CONFIG_GZIP + /*----------------------------------------------------------------------- * Watchdog Configuration */ @@ -218,7 +230,6 @@ #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_X86_ISR_TIMER /*----------------------------------------------------------------------- * SDRAM Configuration @@ -235,8 +246,9 @@ * CPU Features */ -#define CONFIG_SYS_GENERIC_TIMER +#define CONFIG_SYS_X86_TSC_TIMER #define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER #define CONFIG_SYS_NUM_IRQS 16 /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 5cc9b5ab26e..2e2d439678c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -38,6 +38,8 @@ #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#elif defined(CONFIG_P5040DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 198892ba571..00e92a68503 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -36,6 +36,7 @@ #define CONFIG_MACH_DAVINCI_DA830_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA830 /* TI DA830 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE @@ -226,6 +227,28 @@ #define CONFIG_CMD_SAVEENV #endif +/* SD/MMC configuration */ +#ifndef CONFIG_USE_NAND +#define CONFIG_MMC +#define CONFIG_DAVINCI_MMC_SD1 +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#endif + +/* + * Enable MMC commands only when + * MMC support is present + */ +#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX) +#define CONFIG_DOS_PARTITION /* include support for FAT/storage */ +#define CONFIG_CMD_FAT /* include support for FAT cmd */ +#endif + +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#endif + #if !defined(CONFIG_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) @@ -244,8 +267,6 @@ #define CONFIG_USB_STORAGE /* MSC class support */ #define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ -#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ -#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ #ifdef CONFIG_USB_KEYBOARD /* HID class support */ #define CONFIG_SYS_USB_EVENT_POLL diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 7b68f7ca987..27238434393 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -75,6 +75,20 @@ #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 28a306ba8e0..c11f005535d 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -28,11 +28,20 @@ #ifndef __CONFIG_DRA7XX_EVM_H #define __CONFIG_DRA7XX_EVM_H +/* High Level Configuration Options */ +#define CONFIG_DRA7XX /* in a TI DRA7XX core */ #define CONFIG_ENV_IS_NOWHERE /* For now. */ #include <configs/omap5_common.h> -#define CONFIG_DRA7XX /* in a TI DRA7XX core */ #define CONFIG_SYS_PROMPT "DRA752 EVM # " +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 UART1_BASE +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_OMAP_ABE_SYSCK + +#define CONSOLEDEV "ttyO0" + #endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 8a82892f4f9..b32d1bdb98e 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -78,9 +78,9 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) /* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 +#define CONFIG_SILENT_CONSOLE /* Console configuration */ #define CONFIG_CONSOLE_MUX @@ -93,15 +93,18 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS -#define TZPC_BASE_OFFSET 0x10000 - /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_S5P_SDHCI +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_SUPPORT_EMMC_BOOT + #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SKIP_LOWLEVEL_INIT /* PWM */ #define CONFIG_PWM @@ -135,6 +138,7 @@ #define CONFIG_USB_STORAGE /* USB boot mode */ +#define CONFIG_USB_BOOTING #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 @@ -150,8 +154,10 @@ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 +#define CONFIG_SPL_LIBCOMMON_SUPPORT + /* specific .lds file */ -#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds" +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x02023400 #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) @@ -227,15 +233,19 @@ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) -#define OM_STAT (0x1f << 1) +#define CONFIG_SPI_BOOTING #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) #define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + #define CONFIG_IRAM_STACK 0x02050000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD @@ -262,6 +272,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #define EXYNOS5_SPI_NUM_CONTROLLERS 5 diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h new file mode 100644 index 00000000000..e7765141585 --- /dev/null +++ b/include/configs/goflexhome.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> + * + * Based on dockstar.h originally written by + * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> + * + * Based on sheevaplug.h originally written by + * Prafulla Wadaskar <prafulla@marvell.com> + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_GOFLEXHOME_H +#define _CONFIG_GOFLEXHOME_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_GOFLEXHOME /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Default GPIO configuration and LED status + */ +#define GOFLEXHOME_OE_LOW (~(0)) +#define GOFLEXHOME_OE_HIGH (~(0)) +#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ +#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT4 +#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0xC0000 +#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:root; " \ + "ubifsload 0x800000 ${kernel}; " \ + "bootm 0x800000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/uImage\0" \ + "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */ + +/* + * * SATA Driver configuration + * */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +/* + * * RTC driver configuration + * */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 0c73f86ec15..27aaf1663d0 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -49,6 +49,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_HARMONY #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ /* SD/MMC */ #define CONFIG_MMC @@ -83,6 +84,14 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h index 1912d7df376..afbd5499974 100644 --- a/include/configs/igep0033.h +++ b/include/configs/igep0033.h @@ -214,8 +214,14 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +/* + * Place the image at the start of the ROM defined image space and leave + * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ +#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 09b5798d578..e2b3b21182f 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -120,10 +120,14 @@ #endif /* + * Enable platform initialisation via misc_init_r() function + */ +#define CONFIG_MISC_INIT_R + +/* * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_NETCONSOLE #endif @@ -153,6 +157,9 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#if defined(CONFIG_NET2BIG_V2) +#define CONFIG_SYS_I2C_G762_ADDR 0x3e +#endif #endif /* CONFIG_CMD_I2C */ /* diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h new file mode 100644 index 00000000000..026f32134aa --- /dev/null +++ b/include/configs/lp8x4x.h @@ -0,0 +1,262 @@ +/* + * ICP DAS LP-8x4x configuration file + * + * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Board Configuration Options + */ +#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */ +#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */ +#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X +#define CONFIG_SYS_TEXT_BASE 0x00000000 + +#define CONFIG_SYS_MALLOC_LEN (128*1024) +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOOTCOMMAND \ + "bootm 80000;" + +#define CONFIG_BOOTARGS \ + "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \ + "init=/sbin/init rootfstype=ext3" + +#define CONFIG_TIMESTAMP +#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_LZMA /* LZMA compression support */ +#undef CONFIG_OF_LIBFDT + +/* + * Serial Console Configuration + */ +#define CONFIG_PXA_SERIAL +#define CONFIG_FFUART 1 +#define CONFIG_CONS_INDEX 3 +#define CONFIG_BAUDRATE 115200 + +/* + * Bootloader Components Configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_USB +#undef CONFIG_LCD +#undef CONFIG_CMD_IDE + +/* + * Networking Configuration + * chip on the ICPDAS LINPAC board + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x0C000000 +#define DM9000_IO 0x0C000000 +#define DM9000_DATA 0x0C004000 +#define DM9000_IO_2 0x0D000000 +#define DM9000_DATA_2 0x0D004000 +#define CONFIG_NET_RETRY_COUNT 10 + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#endif + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#endif + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * HUSH Shell Configuration + */ +#define CONFIG_SYS_HUSH_PARSER 1 + +#undef CONFIG_SYS_LONGHELP +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " +#else +#define CONFIG_SYS_PROMPT "=> " +#endif +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Clock Configuration + */ +#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ + +/* + * DRAM Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ + +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ +#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ + +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0xa0008000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +/* Use first 64kb bank of the internal SRAM */ +#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 + +/* + * NOR FLASH + */ +#define CONFIG_SYS_MONITOR_BASE 0x0 +#define CONFIG_SYS_MONITOR_LEN 0x40000 +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x40000 + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } + +#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 + +#define CONFIG_ENV_IS_IN_FLASH 1 + +/* + * GPIO settings + */ +#define CONFIG_SYS_GPSR0_VAL 0x0808c014 +#define CONFIG_SYS_GPSR1_VAL 0x00cf0002 +#define CONFIG_SYS_GPSR2_VAL 0x0221c000 +#define CONFIG_SYS_GPSR3_VAL 0x00020000 + +#define CONFIG_SYS_GPCR0_VAL 0x00000000 +#define CONFIG_SYS_GPCR1_VAL 0x0000ab80 +#define CONFIG_SYS_GPCR2_VAL 0x00100000 +#define CONFIG_SYS_GPCR3_VAL 0x0 + +#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4 +#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 +#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff +#define CONFIG_SYS_GPDR3_VAL 0x00021b81 + +#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 +#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018 +#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a +#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x55f0a402 +#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c +#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 + +#define CONFIG_SYS_PSSR_VAL 0x32 + +/* + * Clock settings + */ +#define CONFIG_SYS_CKEN 0x005002c0 +#define CONFIG_SYS_CCCR 0x02000290 +#define CONFIG_SYS_CLKCFG 0x0000000b + +/* + * Memory settings + */ +#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2 +#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc +#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9 +#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 +#define CONFIG_SYS_MDREFR_VAL 0x2093e018 +#define CONFIG_SYS_MDCNFG_VAL 0x890009d1 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CONFIG_SYS_MECR_VAL 0x00000001 +#define CONFIG_SYS_MCMEM0_VAL 0x0000c497 +#define CONFIG_SYS_MCMEM1_VAL 0x0000c497 +#define CONFIG_SYS_MCATT0_VAL 0x0000c497 +#define CONFIG_SYS_MCATT1_VAL 0x0000c497 +#define CONFIG_SYS_MCIO0_VAL 0x00008407 +#define CONFIG_SYS_MCIO1_VAL 0x00008407 + +/* + * LCD + */ +#ifdef CONFIG_LCD +#define CONFIG_VOIPAC_LCD +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x" +#define CONFIG_USB_STORAGE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0c4e7193ba7..17f53baf908 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -104,7 +104,7 @@ /* gpio */ #ifdef XILINX_GPIO_BASEADDR -# define CONFIG_SYS_GPIO_0 1 +# define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif @@ -312,6 +312,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #define CONFIG_CMD_ECHO +#define CONFIG_CMD_GPIO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) # define CONFIG_CMD_CACHE diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h deleted file mode 100644 index 04e8d3ad513..00000000000 --- a/include/configs/omap2420h4.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Kshitij Gupta <kshitij@ti.com> - * - * Configuration settings for the 242x TI H4 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420H4 1 /* and on a H4 board */ -/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ -/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ - -#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000 - -/* Clock config to target*/ -#define PRCM_CONFIG_II 1 -/* #define PRCM_CONFIG_III 1 */ - -#include <asm/arch/omap2420.h> /* get chip and board defs */ - -/* On H4, NOR and NAND flash are mutual exclusive. - Define this if you want to use NAND - */ -/*#define CONFIG_SYS_NAND_BOOT */ - -#ifdef CONFIG_APTIX -#define V_SCLK 1500000 -#else -#define V_SCLK 12000000 -#endif - -/* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ -#define CONFIG_SYS_CLK_FREQ V_SCLK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 -#define CONFIG_OF_LIBFDT - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) - -/* - * Hardware drivers - */ - -/* - * SMC91c96 Etherent - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#ifdef CONFIG_APTIX -#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ -#else -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ -#endif - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* UART1 on H4 */ - - /* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP24XX_I2C - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifdef CONFIG_SYS_NAND_BOOT - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_I2C - #define CONFIG_CMD_NAND - #define CONFIG_CMD_JFFS2 -#else - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_I2C - #define CONFIG_CMD_JFFS2 - - #undef CONFIG_CMD_SOURCE -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_BOOTDELAY 3 - -#ifdef NFS_BOOT_DEFAULTS -#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" -#else -#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" -#endif - -#define CONFIG_NETMASK 255.255.254.0 -#define CONFIG_IPADDR 128.247.77.90 -#define CONFIG_SERVERIP 128.247.77.158 -#define CONFIG_BOOTFILE "uImage" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_APTIX -# define CONFIG_SYS_PROMPT "OMAP2420 Aptix # " -#else -# define CONFIG_SYS_PROMPT "OMAP242x H4 # " -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ - -/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by - * 32KHz clk, or from external sig. This rate is divided by a local divisor. - */ -#ifdef CONFIG_APTIX -#define V_PTV 3 -#else -#define V_PTV 7 /* use with 12MHz/128 */ -#endif - -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 -#define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 - -#define PHYS_FLASH_SECT_SIZE SZ_128K -#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE_1 SZ_32M -#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ -#define PHYS_FLASH_SIZE_2 SZ_32M - -#define PHYS_SRAM 0x4020F800 -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_LEN SZ_128K /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 } - -#ifdef CONFIG_SYS_NAND_BOOT -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x80000 /* environment starts here */ -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_256K) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ -#endif - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_SYS_JFFS2_MEM_NAND - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=omap2420-1" -#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" -*/ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index d6448b0529e..2fa4382c3ef 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -45,10 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 -/* Clock Defines */ -#define V_OSCK 38400000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -154,6 +150,7 @@ "console=ttyO2,115200n8\0" \ "fdt_high=0xffffffff\0" \ "fdtaddr=0x80f80000\0" \ + "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ @@ -181,8 +178,12 @@ "setenv fdtfile omap4-sdp.dtb; fi; " \ "if test $board_name = panda; then " \ "setenv fdtfile omap4-panda.dtb; fi;" \ + "if test $board_name = panda-a4; then " \ + "setenv fdtfile omap4-panda-a4.dtb; fi;" \ "if test $board_name = panda-es; then " \ - "setenv fdtfile omap4-panda-es.dtb; fi; \0" \ + "setenv fdtfile omap4-panda-es.dtb; fi;" \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index deb5e9fd5e6..b87ee422869 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -45,10 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -/* Clock Defines */ -#define V_OSCK 19200000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT @@ -81,10 +77,6 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE - -#define CONFIG_BAUDRATE 115200 /* CPU */ #define CONFIG_ARCH_CPU_INIT @@ -144,9 +136,10 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ + "console=" CONSOLEDEV ",115200n8\0" \ "fdt_high=0xffffffff\0" \ "fdtaddr=0x80f80000\0" \ + "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ @@ -174,7 +167,11 @@ "bootz ${loadaddr} - ${fdtaddr}\0" \ "findfdt="\ "if test $board_name = omap5_uevm; then " \ - "setenv fdtfile omap5-uevm.dtb; fi;\0 " \ + "setenv fdtfile omap5-uevm.dtb; fi; " \ + "if test $board_name = dra7xx; then " \ + "setenv fdtfile dra7-evm.dtb; fi;" \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \ #define CONFIG_BOOTCOMMAND \ @@ -246,6 +243,10 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PALMAS_POWER +#endif + /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 9e0339b31bf..46dacc20744 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -35,10 +35,9 @@ #include <configs/omap5_common.h> -/* TWL6035 */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PALMAS_POWER -#endif +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE +#define CONFIG_BAUDRATE 115200 /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC @@ -54,7 +53,9 @@ #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART -#define CONFIG_SYS_PROMPT "OMAP5430 EVM # " +#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # " + +#define CONSOLEDEV "ttyO2" #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index ff2b24d97f4..5013aeeca24 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -36,6 +36,7 @@ #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F /* Keep L2 Cache Disabled */ #define CONFIG_L2_OFF 1 @@ -67,6 +68,8 @@ #define CONFIG_BAUDRATE 115200 #define EXYNOS4_DEFAULT_UART_OFFSET 0x020000 +#define CONFIG_SKIP_LOWLEVEL_INIT + /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC @@ -96,6 +99,8 @@ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 +#define CONFIG_SPL_TEXT_BASE 0x02021410 + #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" /* Miscellaneous configurable options */ @@ -145,7 +150,10 @@ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) #define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + +#define CONFIG_SYS_INIT_SP_ADDR 0x02040000 /* U-boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 @@ -154,4 +162,5 @@ /* Enable devicetree support */ #define CONFIG_OF_LIBFDT + #endif /* __CONFIG_H */ diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h new file mode 100644 index 00000000000..2ab6fd2e8a9 --- /dev/null +++ b/include/configs/palmtreo680.h @@ -0,0 +1,286 @@ +/* + * Palm Treo 680 configuration file + * + * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Board Configuration Options + */ +#define CONFIG_CPU_PXA27X +#define CONFIG_PALMTREO680 +#define CONFIG_MACH_TYPE MACH_TYPE_TREO680 + +#define CONFIG_SYS_MALLOC_LEN (4096*1024) + +#define CONFIG_LZMA + +/* + * Serial Console Configuration + */ +#define CONFIG_PXA_SERIAL +#define CONFIG_FFUART 1 +#define CONFIG_BAUDRATE 9600 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_CONS_INDEX 3 + +/* we have nand (although technically nand *is* flash...) */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_LCD +/* #define CONFIG_KEYBOARD */ /* TODO */ + +/* + * Bootloader Components Configuration + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE +#undef CONFIG_CMD_XIMG + +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#endif + +/* + * LCD + */ +#ifdef CONFIG_LCD +#define CONFIG_PXA_LCD +#define CONFIG_ACX544AKN +#define CONFIG_LCD_LOGO +#define CONFIG_SYS_LCD_PXA_NO_L_BIAS /* don't configure GPIO77 as L_BIAS */ +#define LCD_BPP LCD_COLOR16 +#define CONFIG_FB_ADDR 0x5c000000 /* internal SRAM */ +#define CONFIG_CMD_BMP +#define CONFIG_SPLASH_SCREEN /* requires "splashimage" env var */ +#define CONFIG_SPLASH_SCREEN_ALIGN /* requires "splashpos" env var */ +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) + +#endif + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * HUSH Shell Configuration + */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " +#else +#define CONFIG_SYS_PROMPT "=> " +#endif +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_DEVICE_NULLDEV 1 + +/* + * Clock Configuration + */ +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * DRAM Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_SYS_DRAM_BASE 0xa0000000 +#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ + +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* + * GPIO settings + */ +#define CONFIG_SYS_GAFR0_L_VAL 0x0E000000 +#define CONFIG_SYS_GAFR0_U_VAL 0xA500001A +#define CONFIG_SYS_GAFR1_L_VAL 0x60000002 +#define CONFIG_SYS_GAFR1_U_VAL 0xAAA07959 +#define CONFIG_SYS_GAFR2_L_VAL 0x02AAAAAA +#define CONFIG_SYS_GAFR2_U_VAL 0x41440F08 +#define CONFIG_SYS_GAFR3_L_VAL 0x56AA95FF +#define CONFIG_SYS_GAFR3_U_VAL 0x00001401 +#define CONFIG_SYS_GPCR0_VAL 0x1FF80400 +#define CONFIG_SYS_GPCR1_VAL 0x03003FC1 +#define CONFIG_SYS_GPCR2_VAL 0x01C1E000 +#define CONFIG_SYS_GPCR3_VAL 0x01C1E000 +#define CONFIG_SYS_GPDR0_VAL 0xCFF90400 +#define CONFIG_SYS_GPDR1_VAL 0xFB22BFC1 +#define CONFIG_SYS_GPDR2_VAL 0x93CDFFDF +#define CONFIG_SYS_GPDR3_VAL 0x0069FF81 +#define CONFIG_SYS_GPSR0_VAL 0x02000018 +#define CONFIG_SYS_GPSR1_VAL 0x00000000 +#define CONFIG_SYS_GPSR2_VAL 0x000C0000 +#define CONFIG_SYS_GPSR3_VAL 0x00080000 + +#define CONFIG_SYS_PSSR_VAL 0x30 + +/* + * Clock settings + */ +#define CONFIG_SYS_CKEN 0x01ffffff +#define CONFIG_SYS_CCCR 0x02000210 + +/* + * Memory settings + */ +#define CONFIG_SYS_MSC0_VAL 0x7ff844c8 +#define CONFIG_SYS_MSC1_VAL 0x7ff86ab4 +#define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 +#define CONFIG_SYS_MDCNFG_VAL 0x0B880acd +#define CONFIG_SYS_MDREFR_VAL 0x201fa031 +#define CONFIG_SYS_MDMRS_VAL 0x00320032 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x40044004 +#define CONFIG_SYS_MECR_VAL 0x00000003 +#define CONFIG_SYS_MCMEM0_VAL 0x0001c391 +#define CONFIG_SYS_MCMEM1_VAL 0x0001c391 +#define CONFIG_SYS_MCATT0_VAL 0x0001c391 +#define CONFIG_SYS_MCATT1_VAL 0x0001c391 +#define CONFIG_SYS_MCIO0_VAL 0x00014611 +#define CONFIG_SYS_MCIO1_VAL 0x0001c391 + +/* + * USB + */ +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_USB_DEV_PULLUP_GPIO 114 + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */ +#define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */ +#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */ +#define CONFIG_SPL_NAND_DOCG4 /* use lean docg4 nand spl driver */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT /* spl uses memcpy */ + +/* + * NAND + */ +#define CONFIG_NAND_DOCG4 +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* only one device */ +#define CONFIG_SYS_NAND_BASE 0x00000000 /* mapped to reset vector */ +#define CONFIG_SYS_NAND_PAGE_SIZE 0x200 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_BITREVERSE /* needed by docg4 driver */ +#define CONFIG_BCH /* needed by docg4 driver */ + +/* + * IMPORTANT NOTE: this is the size of the concatenated spl + u-boot image. It + * will be rounded up to the next 64k boundary (the spl flash block size), so it + * does not have to be exact, but you must ensure that it is not less than the + * actual image size, or it may fail to boot (bricked phone)! + * (Tip: reduces to three blocks with lcd and mmc support removed from u-boot.) +*/ +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* four 64k flash blocks */ + +/* + * This is the byte offset into the flash at which the concatenated spl + u-boot + * image is placed. It must be at the start of a block (256k boundary). Blocks + * 0 - 5 are write-protected, so we start at block 6. + */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x180000 /* block 6 */ + +/* DRAM address to which u-boot proper is loaded (before it relocates itself) */ +#define CONFIG_SYS_NAND_U_BOOT_DST 0xa0000000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST + +/* passed to linker by Makefile as arg to -Ttext option */ +#define CONFIG_SYS_TEXT_BASE 0xa0000000 + +#define CONFIG_SYS_INIT_SP_ADDR 0x5c040000 /* end of internal SRAM */ + +/* + * environment + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_BUILD_ENVCRC +#define CONFIG_ENV_SIZE 0x200 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=usbtty\0" \ + "stdout=usbtty\0" \ + "stderr=usbtty" +#define CONFIG_BOOTARGS "mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) \ +ip=192.168.11.102:::255.255.255.0:treo:usb0" +#define CONFIG_BOOTDELAY 3 + +#if 0 /* example: try 2nd mmc partition, then nand */ +#define CONFIG_BOOTCOMMAND \ + "mmc rescan; " \ + "if mmcinfo && ext2load mmc 0:2 0xa1000000 uImage; then " \ + "bootm 0xa1000000; " \ + "elif nand read 0xa1000000 0x280000 0x240000; then " \ + "bootm 0xa1000000; " \ + "fi; " +#endif + +/* u-boot lives at end of SDRAM, so use start of SDRAM for stand alone apps */ +#define CONFIG_STANDALONE_LOAD_ADDR 0xa0000000 + +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_ICACHE_OFF + +#endif /* __CONFIG_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 478f805b7c5..348030227db 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -204,8 +204,14 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +/* + * Place the image at the start of the ROM defined image space and leave + * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ +#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h new file mode 100644 index 00000000000..c13e983cf1c --- /dev/null +++ b/include/configs/sama5d3xek.h @@ -0,0 +1,245 @@ +/* + * Configuation settings for the SAMA5D3xEK board. + * + * Copyright (C) 2012 - 2013 Atmel + * + * based on at91sam9m10g45ek.h by: + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91FAMILY +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* Device Tree support */ + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_DBGU + +/* + * This needs to be defined for the OHCI code to work but it is defined as + * ATMEL_ID_UHPHS in the CPU specific header files. + */ +#define ATMEL_ID_UHP ATMEL_ID_UHPHS + +/* + * Specify the clock enable bit in the PMC_SCER register. + */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* board specific (not enough SRAM) */ +#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* SerialFlash */ +#define CONFIG_CMD_SF + +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* NAND flash */ +#define CONFIG_CMD_NAND + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 4 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512 +#define CONFIG_CMD_NAND_TRIMFFS +#endif + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0 +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#define CONFIG_DOS_PARTITION +#define CONFIG_USB_STORAGE +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#ifdef CONFIG_SYS_USE_SERIALFLASH +/* bootstrap + u-boot + env + linux in serial flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x42000 0x300000; " \ + "bootm 0x22000000" +#elif CONFIG_SYS_USE_NANDFLASH +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ + "nand read 0x22000000 0x200000 0x600000;" \ + "bootm 0x22000000 - 0x21000000" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env in sd card */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ + "fatload mmc 0:1 0x22000000 uImage; " \ + "bootm 0x22000000 - 0x21000000" +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONIG_ENV_IS_NOWHERE +#endif + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mmcblk0p2 rw rootwait" +#else +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256K(env),256k(evn_redundent),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +#endif diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index b796b46a7f6..0f045972b72 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -36,6 +36,7 @@ #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F /* Mach Type */ #define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310 @@ -57,6 +58,7 @@ /* Handling Sleep Mode*/ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) @@ -93,8 +95,11 @@ /* MMC SPL */ #define CONFIG_SPL +#define CONFIG_SKIP_LOWLEVEL_INIT #define COPY_BL2_FNPTR_ADDR 0x00002488 +#define CONFIG_SPL_TEXT_BASE 0x02021410 + #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" /* Miscellaneous configurable options */ @@ -144,7 +149,10 @@ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) #define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + +#define CONFIG_SYS_INIT_SP_ADDR 0x02040000 /* U-boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h deleted file mode 100644 index f67898e840f..00000000000 --- a/include/configs/sorcery.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_SORCERY 1 /* Sorcery board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* PCI */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 - -#define CONFIG_PCI_MEM_BUS 0x80000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x71000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_PCI_CFG_BUS 0x70000000 -#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS -#define CONFIG_PCI_CFG_SIZE 0x01000000 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Default Environment - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_HOSTNAME sorcery - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/sorcery/uImage\0" \ - "kernel_addr=FFE00000\0" \ - "ramdisk_addr=FFB00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EEPRO100 - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). - * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# - */ - -/* Flash */ -#define CONFIG_SYS_CS0_BASE 0xf800 -#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ -#define CONFIG_SYS_CS0_CTRL 0x001019c0 - -/* NVM */ -#define CONFIG_SYS_CS1_BASE 0xf7e8 -#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ -#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ - -/* Atlas2 + Gemini */ -#define CONFIG_SYS_CS2_BASE 0xf7e7 -#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ -#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ - -/* CAN Controller */ -#define CONFIG_SYS_CS3_BASE 0xf7e6 -#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ - -/* Foreign interface */ -#define CONFIG_SYS_CS4_BASE 0xf7e5 -#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ - -/* CPLD */ -#define CONFIG_SYS_CS5_BASE 0xf7e4 -#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) -#define CONFIG_ENV_SIZE 0x4000 /* 16K */ -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration (for SPD) */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ - -/* SDRAM drive strength register (for SSTL_2 class II)*/ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 - -/* -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 2c665b8a9dd..fa1dcc3528c 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -29,13 +29,14 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -444,11 +445,19 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_MUX_CH_VSC3316_FS 0xc #define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR #define VSC3316_FSM_TX_ADDR 0x70 #define VSC3316_FSM_RX_ADDR 0x71 @@ -504,7 +513,7 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -641,15 +650,10 @@ unsigned long get_board_ddr_clk(void); #define SGMII_CARD_PORT2_PHY_ADDR 0x1D #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ -#define XFI_CARD_PORT2_PHY_ADDR 0x2 -#define XFI_CARD_PORT3_PHY_ADDR 0x3 -#define XFI_CARD_PORT4_PHY_ADDR 0x4 -#define QSGMII_CARD_PHY_ADDR 0x5 -#define FM1_10GEC1_PHY_ADDR 0x6 -#define FM1_10GEC2_PHY_ADDR 0x7 -#define FM2_10GEC1_PHY_ADDR 0x8 -#define FM2_10GEC2_PHY_ADDR 0x9 +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 #endif #ifdef CONFIG_PCI @@ -783,8 +787,21 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE utmi +/* + * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to + * cacheline interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index bf186995ed4..6ed2fde3f36 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -157,6 +157,8 @@ /* overrides for SPL build here */ #ifdef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT + /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL #undef CONFIG_OF_CONTROL diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index c2986d83092..44e98e50195 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -74,9 +74,10 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" - /* Total I2C ports on Tegra114 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 +/* For USB EHCI controller */ +#define CONFIG_EHCI_IS_TDI + #endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 395a657584f..d5abecb46f1 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SPL_STACK 0x000ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" - /* Align LCD to 1MB boundary */ #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index f6c07c6ecc7..7ea36be0ed5 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -87,9 +87,10 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds" - /* Total I2C ports on Tegra30 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 +/* For USB EHCI controller */ +#define CONFIG_EHCI_IS_TDI + #endif /* _TEGRA30_COMMON_H_ */ diff --git a/include/configs/trats.h b/include/configs/trats.h index fd58558bebc..103295e9678 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -66,7 +66,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TRATS /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (16 << 20)) /* select serial console configuration */ #define CONFIG_SERIAL2 /* use SERIAL 2 */ @@ -146,7 +146,8 @@ #define CONFIG_DFU_ALT \ "u-boot mmc 80 400;" \ - "uImage ext4 0 2\0" \ + "uImage ext4 0 2;" \ + "exynos4210-trats.dtb ext4 0 2\0" #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -154,7 +155,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ - "run loaduimage; bootm 0x40007FC0\0" \ + "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ "updatemmc=" \ "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ "mmc boot 0 1 1 0\0" \ @@ -177,7 +178,7 @@ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ - "run loaduimage; bootm 0x40007FC0\0" \ + "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ @@ -188,6 +189,8 @@ "nfsroot=/nfsroot/arm\0" \ "bootblock=" CONFIG_BOOTBLOCK "\0" \ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ + "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr}" \ + "${fdtfile}\0" \ "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=5\0" \ @@ -212,7 +215,10 @@ " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ "setenv spl_imgsize;" \ "setenv spl_imgaddr;" \ - "setenv spl_addr_tmp;\0" + "setenv spl_addr_tmp;\0" \ + "fdtaddr=40800000\0" \ + "fdtfile=exynos4210-trats.dtb\0" + /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -322,4 +328,7 @@ #define CONFIG_USB_GADGET_MASS_STORAGE #endif +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 5755f11714f..64e78751af7 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -43,6 +43,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ /* SD/MMC */ #define CONFIG_MMC @@ -73,6 +74,14 @@ /* USB keyboard */ #define CONFIG_USB_KEYBOARD +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h new file mode 100644 index 00000000000..9e230add491 --- /dev/null +++ b/include/configs/vexpress_ca15_tc2.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 Linaro + * Andre Przywara, <andre.przywara@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA15X2_TC2_h +#define __VEXPRESS_CA15X2_TC2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2" + +#define CONFIG_SYS_CLK_FREQ 24000000 + +#endif diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h new file mode 100644 index 00000000000..9331134967b --- /dev/null +++ b/include/configs/vexpress_ca5x2.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA5X2_h +#define __VEXPRESS_CA5X2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2" + +#endif /* __VEXPRESS_CA5X2_h */ diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h new file mode 100644 index 00000000000..c3b698654d0 --- /dev/null +++ b/include/configs/vexpress_ca9x4.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA9X4_H +#define __VEXPRESS_CA9X4_H + +#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4" + +#endif /* VEXPRESS_CA9X4_H */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/vexpress_common.h index a7cd1d45ad1..3c5683aaaab 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/vexpress_common.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2011 ARM Limited * (C) Copyright 2010 Linaro * Matt Waddel, <matt.waddel@linaro.org> * @@ -24,15 +25,113 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __VEXPRESS_COMMON_H +#define __VEXPRESS_COMMON_H + +/* + * Definitions copied from linux kernel: + * arch/arm/mach-vexpress/include/mach/motherboard.h + */ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +/* CS register bases for the original memory map. */ +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +#define V2M_PERIPH_OFFSET(x) (x << 12) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) + +#define V2M_BASE 0x60000000 +#define CONFIG_SYS_TEXT_BASE 0x60800000 +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +/* CS register bases for the extended memory map. */ +#define V2M_PA_CS0 0x08000000 +#define V2M_PA_CS1 0x0c000000 +#define V2M_PA_CS2 0x14000000 +#define V2M_PA_CS3 0x18000000 +#define V2M_PA_CS7 0x1c000000 + +#define V2M_PERIPH_OFFSET(x) (x << 16) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3)) + +#define V2M_BASE 0x80000000 +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#endif + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* Common peripherals relative to CS7. */ +#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4)) +#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5)) +#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6)) +#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7)) + +#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9)) +#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10)) +#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11)) +#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12)) + +#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15)) + +#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17)) +#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18)) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22)) +#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23)) + +#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26)) + +#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31)) +#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32) + +/* System register offsets. */ +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) /* Board info register */ -#define SYS_ID 0x10000000 +#define SYS_ID V2M_SYSREGS #define CONFIG_REVISION_TAG 1 -#define CONFIG_SYS_TEXT_BASE 0x60800000 -#define CONFIG_SYS_MEMTEST_START 0x60000000 +#define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_HZ 1000 @@ -46,13 +145,13 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define SCTL_BASE 0x10001000 +#define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) /* SMSC9115 Ethernet from SMSC9118 family */ #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_32_BIT 1 -#define CONFIG_SMC911X_BASE 0x4E000000 +#define CONFIG_SMC911X_BASE V2M_LAN9118 /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL @@ -62,8 +161,9 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_SERIAL0 0x10009000 -#define CONFIG_SYS_SERIAL1 0x1000A000 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_SERIAL0 V2M_UART0 +#define CONFIG_SYS_SERIAL1 V2M_UART1 /* Command line configuration */ #define CONFIG_CMD_BDI @@ -79,6 +179,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION 1 @@ -86,7 +188,7 @@ #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000 +#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 @@ -97,18 +199,18 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.ca9x4_ct_vxp" /* Miscellaneous configurable options */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */ -#define LINUX_BOOT_PARAM_ADDR 0x60000200 +#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) +#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) #define CONFIG_BOOTDELAY 2 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \ + ((unsigned int)0x20000000)) #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ #define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */ @@ -122,14 +224,27 @@ /* Basic environment settings */ #define CONFIG_BOOTCOMMAND "run bootflash;" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#define CONFIG_PLATFORM_ENV_SETTINGS \ "loadaddr=0x80008000\0" \ "ramdisk_addr_r=0x61000000\0" \ "kernel_addr=0x44100000\0" \ "ramdisk_addr=0x44800000\0" \ "maxramdisk=0x1800000\0" \ "pxefile_addr_r=0x88000000\0" \ - "kernel_addr_r=0x80008000\0" \ + "kernel_addr_r=0x80008000\0" +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +#define CONFIG_PLATFORM_ENV_SETTINGS \ + "loadaddr=0xa0008000\0" \ + "ramdisk_addr_r=0x81000000\0" \ + "kernel_addr=0x0c100000\0" \ + "ramdisk_addr=0x0c800000\0" \ + "maxramdisk=0x1800000\0" \ + "pxefile_addr_r=0xa8000000\0" \ + "kernel_addr_r=0xa0008000\0" +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS \ "console=ttyAMA0,38400n8\0" \ "dram=1024M\0" \ "root=/dev/sda1 rw\0" \ @@ -148,8 +263,8 @@ #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_SIZE 0x04000000 #define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BASE0 0x40000000 -#define CONFIG_SYS_FLASH_BASE1 0x44000000 +#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 +#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 /* Timeout values in ticks */ @@ -189,10 +304,12 @@ #define CONFIG_SYS_PROMPT "VExpress# " #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER + #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_CMD_SOURCE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 16 /* max command args */ -#endif +#endif /* VEXPRESS_COMMON_H */ diff --git a/include/dwmmc.h b/include/dwmmc.h index c8b1d408e2b..e142f3ec4a3 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -123,6 +123,8 @@ #define MSIZE(x) ((x) << 28) #define RX_WMARK(x) ((x) << 16) #define TX_WMARK(x) (x) +#define RX_WMARK_SHIFT 16 +#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT) #define DWMCI_IDMAC_OWN (1 << 31) #define DWMCI_IDMAC_CH (1 << 4) @@ -144,6 +146,7 @@ struct dwmci_host { unsigned int bus_hz; int dev_index; int buswidth; + u32 clksel_val; u32 fifoth_val; struct mmc *mmc; diff --git a/include/ext4fs.h b/include/ext4fs.h index 025a2e89c23..379f7eb5e9f 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -141,4 +141,5 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock); int ext4fs_probe(block_dev_desc_t *fs_dev_desc, disk_partition_t *fs_partition); int ext4_read_file(const char *filename, void *buf, int offset, int len); +int ext4_read_superblock(char *buffer); #endif diff --git a/include/ext_common.h b/include/ext_common.h index 86373a6e501..78a7808aa96 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -34,7 +34,6 @@ #define __EXT_COMMON__ #include <command.h> #define SECTOR_SIZE 0x200 -#define SECTOR_BITS 9 /* Magic value used to identify an ext2 filesystem. */ #define EXT2_MAGIC 0xEF53 @@ -58,18 +57,13 @@ #define FILETYPE_INO_SYMLINK 0120000 #define EXT2_ROOT_INO 2 /* Root inode */ -/* Bits used as offset in sector */ -#define DISK_SECTOR_BITS 9 /* The size of an ext2 block in bytes. */ #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) -/* Log2 size of ext2 block in 512 blocks. */ -#define LOG2_EXT2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 1) - /* Log2 size of ext2 block in bytes. */ -#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 10) +#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ + (data->sblock.log2_block_size) \ + + EXT2_MIN_BLOCK_LOG_SIZE) #define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \ (data->sblock.inode_size)) diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h index c34dde7477e..8284f533488 100644 --- a/include/faraday/ftsdc010.h +++ b/include/faraday/ftsdc010.h @@ -23,6 +23,7 @@ #define __FTSDC010_H #ifndef __ASSEMBLY__ + /* sd controller register */ struct ftsdc010_mmc { unsigned int cmd; /* 0x00 - command reg */ @@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */ #define FTSDC010_STATUS_DATA0_STATUS (1 << 17) #endif /* CONFIG_FTSDC010_SDIO */ +#define FTSDC010_STATUS_RSP_ERROR \ + (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT) +#define FTSDC010_STATUS_RSP_MASK \ + (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK) +#define FTSDC010_STATUS_DATA_ERROR \ + (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT) +#define FTSDC010_STATUS_DATA_MASK \ + (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \ + | FTSDC010_STATUS_DATA_END) /* 0x2c - clear register */ #define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0) @@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0) #define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */ #define FTSDC010_CCR_CLK_DIS (1 << 8) +#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */ /* card type */ #define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE #define FTSDC010_CARD_TYPE_MMC 0x0 /* 0x3c - bus width register */ -#define FTSDC010_BWR_SINGLE_BUS (1 << 0) -#define FTSDC010_BWR_WIDE_8_BUS (1 << 1) -#define FTSDC010_BWR_WIDE_4_BUS (1 << 2) -#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3) -#define FTSDC010_BWR_CARD_DETECT (1 << 5) - -#define FTSDC010_BWR_1_BUS_SUPPORT 0x0 -#define FTSDC010_BWR_4_BUS_SUPPORT 0x1 -#define FTSDC010_BWR_8_BUS_SUPPORT 0x2 +#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */ +#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */ +#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */ +#define FTSDC010_BWR_MODE_MASK (7 << 0) +#define FTSDC010_BWR_MODE_SHIFT (0) +#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */ +#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */ +#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */ +#define FTSDC010_BWR_CAPS_MASK (3 << 3) +#define FTSDC010_BWR_CAPS_SHIFT (3) +#define FTSDC010_BWR_CARD_DETECT (1 << 5) /* 0x44 or 0x9c - feature register */ #define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff) diff --git a/include/fdt.h b/include/fdt.h index f9612ed8212..526aedb5155 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,5 +1,56 @@ #ifndef _FDT_H #define _FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ #ifndef __ASSEMBLY__ @@ -57,6 +108,4 @@ struct fdt_property { #define FDT_V16_SIZE FDT_V3_SIZE #define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) -/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ -#define FDT_RAMDISK_OVERHEAD 0x80 #endif /* _FDT_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 2cccc3551db..8f07a670db6 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -78,11 +78,9 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -#ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -#endif void set_working_fdt_addr(void *addr); int fdt_resize(void *blob); diff --git a/include/fdtdec.h b/include/fdtdec.h index 4e8032ba6cd..818ddde369e 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -64,6 +64,8 @@ struct fdt_memory { enum fdt_compat_id { COMPAT_UNKNOWN, COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ + COMPAT_NVIDIA_TEGRA30_USB, /* Tegra30 USB port */ + COMPAT_NVIDIA_TEGRA114_USB, /* Tegra114 USB port */ COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ @@ -89,6 +91,8 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */ COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */ COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */ + COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */ + COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */ diff --git a/include/fm_eth.h b/include/fm_eth.h index 495765b933f..8fcf172105a 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -88,7 +88,7 @@ enum fm_eth_type { #define FM_TGEC_INFO_INITIALIZER(idx, n) \ { \ - FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \ .index = idx, \ .num = n - 1, \ .type = FM_ETH_10G_E, \ @@ -96,7 +96,7 @@ enum fm_eth_type { .rx_port_id = RX_PORT_10G_BASE + n - 1, \ .tx_port_id = TX_PORT_10G_BASE + n - 1, \ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ - offsetof(struct ccsr_fman, memac[n-1]),\ + offsetof(struct ccsr_fman, memac[n-1+8]),\ } #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ diff --git a/include/hash.h b/include/hash.h index 2dbbd9b7d57..c402067af8a 100644 --- a/include/hash.h +++ b/include/hash.h @@ -71,4 +71,26 @@ enum { int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +/** + * hash_block() - Hash a block according to the requested algorithm + * + * The caller probably knows the hash length for the chosen algorithm, but + * in order to provide a general interface, and output_size parameter is + * provided. + * + * @algo_name: Hash algorithm to use + * @data: Data to hash + * @len: Lengh of data to hash in bytes + * @output: Place to put hash value + * @output_size: On entry, pointer to the number of bytes available in + * output. On exit, pointer to the number of bytes used. + * If NULL, then it is assumed that the caller has + * allocated enough space for the hash. This is possible + * since the caller is selecting the algorithm. + * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, + * -ENOSPC if the output buffer is not large enough. + */ +int hash_block(const char *algo_name, const void *data, unsigned int len, + uint8_t *output, int *output_size); + #endif diff --git a/include/image.h b/include/image.h index 4ad0e6b21ac..b8cc5236a81 100644 --- a/include/image.h +++ b/include/image.h @@ -36,6 +36,9 @@ #include "compiler.h" #include <asm/byteorder.h> +/* Define this to avoid #ifdefs later on */ +struct lmb; + #ifdef USE_HOSTCC /* new uImage format support enabled on host */ @@ -43,19 +46,79 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define IMAGE_ENABLE_IGNORE 0 +#define IMAGE_INDENT_STRING "" + #else #include <lmb.h> #include <asm/u-boot.h> #include <command.h> +/* Take notice of the 'ignore' property for hashes */ +#define IMAGE_ENABLE_IGNORE 1 +#define IMAGE_INDENT_STRING " " + #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) #include <libfdt.h> #include <fdt_support.h> -#define CONFIG_MD5 /* FIT images need MD5 support */ -#define CONFIG_SHA1 /* and SHA1 */ +# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_SPL_CRC32_SUPPORT +# define IMAGE_ENABLE_CRC32 1 +# endif +# ifdef CONFIG_SPL_MD5_SUPPORT +# define IMAGE_ENABLE_MD5 1 +# endif +# ifdef CONFIG_SPL_SHA1_SUPPORT +# define IMAGE_ENABLE_SHA1 1 +# endif +# else +# define CONFIG_CRC32 /* FIT images need CRC32 support */ +# define CONFIG_MD5 /* and MD5 */ +# define CONFIG_SHA1 /* and SHA1 */ +# define IMAGE_ENABLE_CRC32 1 +# define IMAGE_ENABLE_MD5 1 +# define IMAGE_ENABLE_SHA1 1 +# endif + +#ifndef IMAGE_ENABLE_CRC32 +#define IMAGE_ENABLE_CRC32 0 +#endif + +#ifndef IMAGE_ENABLE_MD5 +#define IMAGE_ENABLE_MD5 0 +#endif + +#ifndef IMAGE_ENABLE_SHA1 +#define IMAGE_ENABLE_SHA1 0 +#endif + +#endif /* CONFIG_FIT */ + +#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH +# define IMAGE_ENABLE_RAMDISK_HIGH 1 +#else +# define IMAGE_ENABLE_RAMDISK_HIGH 0 +#endif + +#ifdef CONFIG_OF_LIBFDT +# define IMAGE_ENABLE_OF_LIBFDT 1 +#else +# define IMAGE_ENABLE_OF_LIBFDT 0 +#endif + +#ifdef CONFIG_SYS_BOOT_GET_CMDLINE +# define IMAGE_BOOT_GET_CMDLINE 1 +#else +# define IMAGE_BOOT_GET_CMDLINE 0 +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +# define IMAAGE_OF_BOARD_SETUP 1 +#else +# define IMAAGE_OF_BOARD_SETUP 0 #endif /* @@ -244,9 +307,7 @@ typedef struct bootm_headers { ulong rd_start, rd_end;/* ramdisk start/end */ -#ifdef CONFIG_OF_LIBFDT char *ft_addr; /* flat dev tree address */ -#endif ulong ft_len; /* length of flat device tree */ ulong initrd_start; @@ -333,34 +394,35 @@ int genimg_get_type_id(const char *name); int genimg_get_comp_id(const char *name); void genimg_print_size(uint32_t size); +#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ + defined(USE_HOSTCC) +#define IMAGE_ENABLE_TIMESTAMP 1 +#else +#define IMAGE_ENABLE_TIMESTAMP 0 +#endif +void genimg_print_time(time_t timestamp); + #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ -int genimg_get_format(void *img_addr); +int genimg_get_format(const void *img_addr); int genimg_has_config(bootm_headers_t *images); ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); - -#ifdef CONFIG_OF_LIBFDT int boot_get_fdt(int flag, int argc, char * const argv[], bootm_headers_t *images, char **of_flat_tree, ulong *of_size); void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); -#endif -#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, ulong *initrd_start, ulong *initrd_end); -#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ -#ifdef CONFIG_SYS_BOOT_GET_CMDLINE int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); -#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ #ifdef CONFIG_SYS_BOOT_GET_KBD int boot_get_kbd(struct lmb *lmb, bd_t **kbd); #endif /* CONFIG_SYS_BOOT_GET_KBD */ @@ -502,6 +564,31 @@ static inline int image_check_target_arch(const image_header_t *hdr) } #endif /* USE_HOSTCC */ +/** + * Set up properties in the FDT + * + * This sets up properties in the FDT that is to be passed to linux. + * + * @images: Images information + * @blob: FDT to update + * @of_size: Size of the FDT + * @lmb: Points to logical memory block structure + * @return 0 if ok, <0 on failure + */ +int image_setup_libfdt(bootm_headers_t *images, void *blob, + int of_size, struct lmb *lmb); + +/** + * Set up the FDT to use for booting a kernel + * + * This performs ramdisk setup, sets up the FDT if required, and adds + * paramters to the FDT if libfdt is available. + * + * @param images Images information + * @return 0 if ok, <0 on failure + */ +int image_setup_linux(bootm_headers_t *images); + /*******************************************************************/ /* New uImage format specific code (prefixed with fit_) */ /*******************************************************************/ @@ -543,7 +630,6 @@ int fit_parse_subimage(const char *spec, ulong addr_curr, void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); -void fit_image_print_hash(const void *fit, int noffset, const char *p); /** * fit_get_end - get FIT image size @@ -599,18 +685,19 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); -#ifndef USE_HOSTCC -int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); -#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); -int fit_set_hashes(void *fit); -int fit_image_set_hashes(void *fit, int image_noffset); -int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value, - int value_len); -int fit_image_check_hashes(const void *fit, int noffset); -int fit_all_image_check_hashes(const void *fit); +/** + * fit_add_verification_data() - Calculate and add hashes to FIT + * + * @fit: Fit image to process + * @return 0 if ok, <0 for error + */ +int fit_add_verification_data(void *fit); + +int fit_image_verify(const void *fit, int noffset); +int fit_all_image_verify(const void *fit); int fit_image_check_os(const void *fit, int noffset, uint8_t os); int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); int fit_image_check_type(const void *fit, int noffset, uint8_t type); @@ -623,8 +710,28 @@ int fit_conf_get_kernel_node(const void *fit, int noffset); int fit_conf_get_ramdisk_node(const void *fit, int noffset); int fit_conf_get_fdt_node(const void *fit, int noffset); +/** + * fit_conf_get_prop_node() - Get node refered to by a configuration + * @fit: FIT to check + * @noffset: Offset of conf@xxx node to check + * @prop_name: Property to read from the conf node + * + * The conf@ nodes contain references to other nodes, using properties + * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), + * return the offset of the node referred to (e.g. offset of node + * "/images/kernel@1". + */ +int fit_conf_get_prop_node(const void *fit, int noffset, + const char *prop_name); + void fit_conf_print(const void *fit, int noffset, const char *p); +int fit_check_ramdisk(const void *fit, int os_noffset, + uint8_t arch, int verify); + +int calculate_hash(const void *data, int data_len, const char *algo, + uint8_t *value, int *value_len); + #ifndef USE_HOSTCC static inline int fit_image_check_target_arch(const void *fdt, int node) { diff --git a/include/libfdt.h b/include/libfdt.h index fc7f75b9ffa..c5ec2acfd82 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -136,6 +136,28 @@ uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); int fdt_next_node(const void *fdt, int offset, int *depth); +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + /**********************************************************************/ /* General functions */ /**********************************************************************/ @@ -582,7 +604,7 @@ const char *fdt_get_alias_namelen(const void *fdt, * value of the property named 'name' in the node /aliases. * * returns: - * a pointer to the expansion of the alias named 'name', of it exists + * a pointer to the expansion of the alias named 'name', if it exists * NULL, if the given alias or the /aliases node does not exist */ const char *fdt_get_alias(const void *fdt, const char *name); @@ -816,6 +838,20 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset, int fdt_node_offset_by_compatible(const void *fdt, int startoffset, const char *compatible); +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + /**********************************************************************/ /* Write-in-place functions */ /**********************************************************************/ diff --git a/include/libfdt_env.h b/include/libfdt_env.h index 3e3defc76ca..0821258b053 100644 --- a/include/libfdt_env.h +++ b/include/libfdt_env.h @@ -35,4 +35,7 @@ typedef __be64 fdt64_t; #define fdt64_to_cpu(x) be64_to_cpu(x) #define cpu_to_fdt64(x) cpu_to_be64(x) +/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ +#define FDT_RAMDISK_OVERHEAD 0x80 + #endif /* _LIBFDT_ENV_H */ diff --git a/include/lmb.h b/include/lmb.h index 5d1f4b624a2..43082a393fd 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -1,7 +1,6 @@ #ifndef _LINUX_LMB_H #define _LINUX_LMB_H #ifdef __KERNEL__ -#ifdef CONFIG_LMB #include <asm/types.h> /* @@ -57,7 +56,6 @@ lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) void board_lmb_reserve(struct lmb *lmb); void arch_lmb_reserve(struct lmb *lmb); -#endif /* CONFIG_LMB */ #endif /* __KERNEL__ */ #endif /* _LINUX_LMB_H */ diff --git a/include/mmc.h b/include/mmc.h index 8bbc6b6ebec..f88f672f111 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -68,6 +68,7 @@ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 +#define IN_PROGRESS -20 /* operation is in progress */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -92,6 +93,11 @@ #define MMC_CMD_APP_CMD 55 #define MMC_CMD_SPI_READ_OCR 58 #define MMC_CMD_SPI_CRC_ON_OFF 59 +#define MMC_CMD_RES_MAN 62 + +#define MMC_CMD62_ARG1 0xefac62ec +#define MMC_CMD62_ARG2 0xcbaea7 + #define SD_CMD_SEND_RELATIVE_ADDR 3 #define SD_CMD_SWITCH_FUNC 6 @@ -159,6 +165,7 @@ */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ +#define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ @@ -183,6 +190,16 @@ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) +#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) + +#define EXT_CSD_BOOT_ACK(x) (x << 6) +#define EXT_CSD_BOOT_PART_NUM(x) (x << 3) +#define EXT_CSD_PARTITION_ACCESS(x) (x << 0) + + #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -210,6 +227,11 @@ /* Maximum block size for MMC */ #define MMC_MAX_BLOCK_LEN 512 +/* The number of MMC physical partitions. These consist of: + * boot partitions (2), general purpose partitions (4) in MMC v4.4. + */ +#define MMC_NUM_BOOT_PARTITION 2 + struct mmc_cid { unsigned long psn; unsigned short oid; @@ -270,6 +292,10 @@ struct mmc { int (*getcd)(struct mmc *mmc); int (*getwp)(struct mmc *mmc); uint b_max; + char op_cond_pending; /* 1 if we are waiting on an op_cond command */ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ }; int mmc_register(struct mmc *mmc); @@ -286,6 +312,36 @@ int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; +/* Function to change the size of boot partition and rpmb partitions */ +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize); +/* Function to send commands to open/close the specified boot partition */ +int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); + +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Then you should call + * mmc_init, which would block on polling OCR status and complete the device + * initializatin. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. + */ +int mmc_start_init(struct mmc *mmc); + +/** + * Set preinit flag of mmc device. + * + * This will cause the device to be pre-inited during mmc_initialize(), + * which may save boot time if the device is not accessed until later. + * Some eMMC devices take 200-300ms to init, but unfortunately they + * must be sent a series of commands to even get them to start preparing + * for operation. + * + * @param mmc Pointer to a MMC device struct + * @param preinit preinit flag value + */ +void mmc_set_preinit(struct mmc *mmc, int preinit); #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) diff --git a/include/mpc8220.h b/include/mpc8220.h deleted file mode 100644 index c4900a0f110..00000000000 --- a/include/mpc8220.h +++ /dev/null @@ -1,717 +0,0 @@ -/* - * include/mpc8220.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __MPC8220_H__ -#define __MPC8220_H__ - -/* Processor name */ -#if defined(CONFIG_MPC8220) -#define CPU_ID_STR "MPC8220" -#endif - -/* Exception offsets (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -/* Internal memory map */ -/* MPC8220 Internal Register MMAP */ -#define MMAP_MBAR (CONFIG_SYS_MBAR + 0x00000000) /* chip selects */ -#define MMAP_MEMCTL (CONFIG_SYS_MBAR + 0x00000100) /* sdram controller */ -#define MMAP_XLBARB (CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control */ -#define MMAP_CDM (CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */ -#define MMAP_VDOPLL (CONFIG_SYS_MBAR + 0x00000400) /* video PLL */ -#define MMAP_FB (CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller */ -#define MMAP_PCFG (CONFIG_SYS_MBAR + 0x00000600) /* port config */ -#define MMAP_ICTL (CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller */ -#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers */ -#define MMAP_SLTMR (CONFIG_SYS_MBAR + 0x00000900) /* slice timers */ -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00) /* gpio module */ -#define MMAP_XCPCI (CONFIG_SYS_MBAR + 0x00000B00) /* pci controller */ -#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter */ -#define MMAP_EXTDMA1 (CONFIG_SYS_MBAR + 0x00000D00) /* external dma1 */ -#define MMAP_EXTDMA2 (CONFIG_SYS_MBAR + 0x00000E00) /* external dma1 */ -#define MMAP_USBH (CONFIG_SYS_MBAR + 0x00001000) /* usb host */ -#define MMAP_CMTMR (CONFIG_SYS_MBAR + 0x00007f00) /* comm timers */ -#define MMAP_DMA (CONFIG_SYS_MBAR + 0x00008000) /* dma */ -#define MMAP_USBD (CONFIG_SYS_MBAR + 0x00008200) /* usb device */ -#define MMAP_COMMPCI (CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs */ -#define MMAP_1284 (CONFIG_SYS_MBAR + 0x00008500) /* 1284 */ -#define MMAP_PEV (CONFIG_SYS_MBAR + 0x00008600) /* print engine video */ -#define MMAP_PSC1 (CONFIG_SYS_MBAR + 0x00008800) /* psc1 block */ -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller */ -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1 */ -#define MMAP_FEC2 (CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2 */ -#define MMAP_JBIGRAM (CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM */ -#define MMAP_JBIG (CONFIG_SYS_MBAR + 0x0000c000) /* jbig */ -#define MMAP_PDLA (CONFIG_SYS_MBAR + 0x00010000) /* */ -#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config */ -#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00020000) /* SRAM */ - -#define SRAM_SIZE 0x8000 /* 32 KB */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for Programmable Serial Channel - */ -/* equates for mode reg. 1 for channel A or B */ -#define PSC_MR1_RX_RTS 0x80000000 /* receiver RTS enabled */ -#define PSC_MR1_RX_INT 0x40000000 /* receiver intrupt enabled */ -#define PSC_MR1_ERR_MODE 0x20000000 /* block error mode */ -#define PSC_MR1_PAR_MODE_MULTI 0x18000000 /* multi_drop mode */ -#define PSC_MR1_NO_PARITY 0x10000000 /* no parity mode */ -#define PSC_MR1_ALWAYS_0 0x08000000 /* force parity mode */ -#define PSC_MR1_ALWAYS_1 0x0c000000 /* force parity mode */ -#define PSC_MR1_EVEN_PARITY 0x00000000 /* parity mode */ -#define PSC_MR1_ODD_PARITY 0x04000000 /* 0 = even, 1 = odd */ -#define PSC_MR1_BITS_CHAR_8 0x03000000 /* 8 bits */ -#define PSC_MR1_BITS_CHAR_7 0x02000000 /* 7 bits */ -#define PSC_MR1_BITS_CHAR_6 0x01000000 /* 6 bits */ -#define PSC_MR1_BITS_CHAR_5 0x00000000 /* 5 bits */ - -/* equates for mode reg. 2 for channel A or B */ -#define PSC_MR2_NORMAL_MODE 0x00000000 /* normal channel mode */ -#define PSC_MR2_AUTO_MODE 0x40000000 /* automatic channel mode */ -#define PSC_MR2_LOOPBACK_LOCL 0x80000000 /* local loopback channel mode */ -#define PSC_MR2_LOOPBACK_REMT 0xc0000000 /* remote loopback channel mode */ -#define PSC_MR2_TX_RTS 0x20000000 /* transmitter RTS enabled */ -#define PSC_MR2_TX_CTS 0x10000000 /* transmitter CTS enabled */ -#define PSC_MR2_STOP_BITS_2 0x0f000000 /* 2 stop bits */ -#define PSC_MR2_STOP_BITS_1 0x07000000 /* 1 stop bit */ - -/* equates for status reg. A or B */ -#define PSC_SR_BREAK 0x80000000 /* received break */ -#define PSC_SR_NEOF PSC_SR_BREAK /* Next byte is EOF - MIR/FIR */ -#define PSC_SR_FRAMING 0x40000000 /* framing error */ -#define PSC_SR_PHYERR PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */ -#define PSC_SR_PARITY 0x20000000 /* parity error */ -#define PSC_SR_CRCERR PSC_SR_PARITY /* CRC error */ -#define PSC_SR_OVERRUN 0x10000000 /* overrun error */ -#define PSC_SR_TXEMT 0x08000000 /* transmitter empty */ -#define PSC_SR_TXRDY 0x04000000 /* transmitter ready*/ -#define PSC_SR_FFULL 0x02000000 /* fifo full */ -#define PSC_SR_RXRDY 0x01000000 /* receiver ready */ -#define PSC_SR_DEOF 0x00800000 /* Detect EOF or RX-FIFO contain EOF */ -#define PSC_SR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for clock select reg. */ -#define PSC_CSRX16EXT_CLK 0x1110 /* x 16 ext_clock */ -#define PSC_CSRX1EXT_CLK 0x1111 /* x 1 ext_clock */ - -/* equates for command reg. A or B */ -#define PSC_CR_NO_COMMAND 0x00000000 /* no command */ -#define PSC_CR_RST_MR_PTR_CMD 0x10000000 /* reset mr pointer command */ -#define PSC_CR_RST_RX_CMD 0x20000000 /* reset receiver command */ -#define PSC_CR_RST_TX_CMD 0x30000000 /* reset transmitter command */ -#define PSC_CR_RST_ERR_STS_CMD 0x40000000 /* reset error status cmnd */ -#define PSC_CR_RST_BRK_INT_CMD 0x50000000 /* reset break int. command */ -#define PSC_CR_STR_BREAK_CMD 0x60000000 /* start break command */ -#define PSC_CR_STP_BREAK_CMD 0x70000000 /* stop break command */ -#define PSC_CR_RX_ENABLE 0x01000000 /* receiver enabled */ -#define PSC_CR_RX_DISABLE 0x02000000 /* receiver disabled */ -#define PSC_CR_TX_ENABLE 0x04000000 /* transmitter enabled */ -#define PSC_CR_TX_DISABLE 0x08000000 /* transmitter disabled */ - -/* equates for input port change reg. */ -#define PSC_IPCR_SYNC 0x80000000 /* Sync Detect */ -#define PSC_IPCR_D_CTS 0x10000000 /* Delta CTS */ -#define PSC_IPCR_CTS 0x01000000 /* CTS - current state of PSC_CTS */ - -/* equates for auxiliary control reg. (timer and counter clock selects) */ -#define PSC_ACR_BRG 0x80000000 /* for 68681 compatibility - baud rate gen select - 0 = set 1; 1 = set 2 - equates are set 2 ONLY */ -#define PSC_ACR_TMR_EXT_CLK_16 0x70000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_TMR_EXT_CLK 0x60000000 /* external clock */ -#define PSC_ACR_TMR_IP2_16 0x50000000 /* ip2 divided by 16 */ -#define PSC_ACR_TMR_IP2 0x40000000 /* ip2 */ -#define PSC_ACR_CTR_EXT_CLK_16 0x30000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_CTR_TXCB 0x20000000 /* channel B xmitr clock */ -#define PSC_ACR_CTR_TXCA 0x10000000 /* channel A xmitr clock */ -#define PSC_ACR_CTR_IP2 0x00000000 /* ip2 */ -#define PSC_ACR_IEC0 0x01000000 /* interrupt enable ctrl for D_CTS */ - -/* equates for int. status reg. */ -#define PSC_ISR_IPC 0x80000000 /* input port change*/ -#define PSC_ISR_BREAK 0x04000000 /* delta break */ -#define PSC_ISR_RX_RDY 0x02000000 /* receiver rdy /fifo full */ -#define PSC_ISR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_ISR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_ISR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for int. mask reg. */ -#define PSC_IMR_CLEAR 0xff000000 /* Clear the imr */ -#define PSC_IMR_IPC 0x80000000 /* input port change*/ -#define PSC_IMR_BREAK 0x04000000 /* delta break */ -#define PSC_IMR_RX_RDY 0x02000000 /* rcvr ready / fifo full */ -#define PSC_IMR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_IMR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_IMR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for input port reg. */ -#define PSC_IP_LPWRB 0x80000000 /* Low power mode in Ac97 */ -#define PSC_IP_TGL 0x40000000 /* test usage */ -#define PSC_IP_CTS 0x01000000 /* CTS */ - -/* equates for output port bit set reg. */ -#define PSC_OPSET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for output port bit reset reg. */ -#define PSC_OPRESET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for rx FIFO number of data reg. */ -#define PSC_RFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for tx FIFO number of data reg. */ -#define PSC_TFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for rx FIFO status reg */ -#define PSC_RFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_RFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_RFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_RFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_RFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_RFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_RFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_RFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_RFSTAT_OF 0x00100000 /* overflow */ -#define PSC_RFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_RFSTAT_FULL 0x00040000 /* full */ -#define PSC_RFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_RFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for tx FIFO status reg */ -#define PSC_TFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_TFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_TFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_TFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_TFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_TFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_TFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_TFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_TFSTAT_OF 0x00100000 /* overflow */ -#define PSC_TFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_TFSTAT_FULL 0x00040000 /* full */ -#define PSC_TFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_TFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for rx FIFO control reg. */ -#define PSC_RFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_RFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_RFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for tx FIFO control reg. */ -#define PSC_TFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_TFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_TFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for rx FIFO alarm reg */ -#define PSC_RFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for tx FIFO alarm reg */ -#define PSC_TFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for rx FIFO read pointer */ -#define PSC_RFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for tx FIFO read pointer */ -#define PSC_TFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_RFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_TFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO last read frame pointer reg */ -#define PSC_RFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for tx FIFO last read frame pointer reg */ -#define PSC_TFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for rx FIFO last write frame pointer reg */ -#define PSC_RFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* equates for tx FIFO last write frame pointer reg */ -#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* PCI configuration (only for PLL determination)*/ -#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */ -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000 -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24 - -#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for General Purpose Timer - */ -/* Enable and Mode Select */ -#define GPT_OCT(x) (x & 0x3)<<4/* Output Compare Type */ -#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */ -#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */ -#define GPT_CTRL_CE 0x10 /* Counter Enable */ -#define GPT_CTRL_STPCNT 0x04 /* Stop continous */ -#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */ -#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */ -#define GPT_MODE_GPIO(x) (x & 0x3)<<4/* Gpio Mode Type */ -#define GPT_TMS_ICT 0x01 /* Input Capture Enable */ -#define GPT_TMS_OCT 0x02 /* Output Capture Enable */ -#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */ -#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */ - -#define GPT_PWM_WIDTH(x) (x & 0xffff) - -/* Status */ -#define GPT_STA_CAPTURE(x) (x & 0xffff)/* Read of internal counter */ - -#define GPT_OVFPIN_OVF(x) (x & 0x70) /* Internal counter roll over */ -#define GPT_OVFPIN_PIN 0x01 /* Input pin - Timer 0 and 1 */ - -#define GPT_INT_TEXP 0x08 /* Timer Expired in Internal Timer mode */ -#define GPT_INT_PWMP 0x04 /* PWM end of period occurred */ -#define GPT_INT_COMP 0x02 /* OC reference event occurred */ -#define GPT_INT_CAPT 0x01 /* IC reference event occurred */ - -/* ------------------------------------------------------------------------ */ -/* - * Port configuration - */ -#define CONFIG_SYS_FEC1_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_FEC1_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_FEC2_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_PEV_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_GP0_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_GP1_PORT2_CONFIG 0xaaaaaac0 -#define CONFIG_SYS_PSC_PORT3_CONFIG 0x00020000 -#define CONFIG_SYS_CS1_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_CS2_PORT3_CONFIG 0x10000000 -#define CONFIG_SYS_CS3_PORT3_CONFIG 0x40000000 -#define CONFIG_SYS_CS4_PORT3_CONFIG 0x00000400 -#define CONFIG_SYS_CS5_PORT3_CONFIG 0x00000200 -#define CONFIG_SYS_PCI_PORT3_CONFIG 0x01400180 -#define CONFIG_SYS_I2C_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_GP2_PORT3_CONFIG 0x000200a0 - -/* ------------------------------------------------------------------------ */ -/* - * DRAM configuration - */ - -/* Field definitions for the control register */ -#define CTL_MODE_ENABLE_SHIFT 31 -#define CTL_CKE_SHIFT 30 -#define CTL_DDR_SHIFT 29 -#define CTL_REFRESH_SHIFT 28 -#define CTL_ADDRMUX_SHIFT 24 -#define CTL_PRECHARGE_SHIFT 23 -#define CTL_DRIVE_RULE_SHIFT 22 -#define CTL_REFRESH_INTERVAL_SHIFT 16 -#define CTL_DQSOEN_SHIFT 8 -#define CTL_BUFFERED_SHIFT 4 -#define CTL_REFRESH_CMD_SHIFT 2 -#define CTL_PRECHARGE_CMD_SHIFT 1 - -#define CTL_MODE_ENABLE (1<<CTL_MODE_ENABLE_SHIFT) -#define CTL_CKE_HIGH (1<<CTL_CKE_SHIFT) -#define CTL_DDR_MODE (1<<CTL_DDR_SHIFT) -#define CTL_REFRESH_ENABLE (1<<CTL_REFRESH_SHIFT) -#define CTL_ADDRMUX(value) ((value)<<CTL_ADDRMUX_SHIFT) -#define CTL_A8PRECHARGE (1<<CTL_PRECHARGE_SHIFT) -#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT) -#define CTL_DQSOEN(value) ((value)<<CTL_DQSOEN_SHIFT) -#define CTL_BUFFERED (1<<CTL_BUFFERED_SHIFT) -#define CTL_REFRESH_CMD (1<<CTL_REFRESH_CMD_SHIFT) -#define CTL_PRECHARGE_CMD (1<<CTL_PRECHARGE_CMD_SHIFT) - -/* Field definitions for config register 1 */ - -#define CFG1_SRD2RWP_SHIFT 28 -#define CFG1_SWT2RWP_SHIFT 24 -#define CFG1_RLATENCY_SHIFT 20 -#define CFG1_ACT2WR_SHIFT 16 -#define CFG1_PRE2ACT_SHIFT 12 -#define CFG1_REF2ACT_SHIFT 8 -#define CFG1_WLATENCY_SHIFT 4 - -#define CFG1_SRD2RWP(value) ((value)<<CFG1_SRD2RWP_SHIFT) -#define CFG1_SWT2RWP(value) ((value)<<CFG1_SWT2RWP_SHIFT) -#define CFG1_RLATENCY(value) ((value)<<CFG1_RLATENCY_SHIFT) -#define CFG1_ACT2WR(value) ((value)<<CFG1_ACT2WR_SHIFT) -#define CFG1_PRE2ACT(value) ((value)<<CFG1_PRE2ACT_SHIFT) -#define CFG1_REF2ACT(value) ((value)<<CFG1_REF2ACT_SHIFT) -#define CFG1_WLATENCY(value) ((value)<<CFG1_WLATENCY_SHIFT) - -/* Field definitions for config register 2 */ -#define CFG2_BRD2RP_SHIFT 28 -#define CFG2_BWT2RWP_SHIFT 24 -#define CFG2_BRD2WT_SHIFT 20 -#define CFG2_BURSTLEN_SHIFT 16 - -#define CFG2_BRD2RP(value) ((value)<<CFG2_BRD2RP_SHIFT) -#define CFG2_BWT2RWP(value) ((value)<<CFG2_BWT2RWP_SHIFT) -#define CFG2_BRD2WT(value) ((value)<<CFG2_BRD2WT_SHIFT) -#define CFG2_BURSTLEN(value) ((value)<<CFG2_BURSTLEN_SHIFT) - -/* Field definitions for the mode/extended mode register - mode - * register access - */ -#define MODE_REG_SHIFT 30 -#define MODE_OPMODE_SHIFT 25 -#define MODE_CL_SHIFT 22 -#define MODE_BT_SHIFT 21 -#define MODE_BURSTLEN_SHIFT 18 -#define MODE_CMD_SHIFT 16 - -#define MODE_MODE 0 -#define MODE_OPMODE(value) ((value)<<MODE_OPMODE_SHIFT) -#define MODE_CL(value) ((value)<<MODE_CL_SHIFT) -#define MODE_BT_INTERLEAVED (1<<MODE_BT_SHIFT) -#define MODE_BT_SEQUENTIAL (0<<MODE_BT_SHIFT) -#define MODE_BURSTLEN(value) ((value)<<MODE_BURSTLEN_SHIFT) -#define MODE_CMD (1<<MODE_CMD_SHIFT) - -#define MODE_BURSTLEN_8 3 -#define MODE_BURSTLEN_4 2 -#define MODE_BURSTLEN_2 1 - -#define MODE_CL_2 2 -#define MODE_CL_2p5 6 -#define MODE_OPMODE_NORMAL 0 -#define MODE_OPMODE_RESETDLL 2 - - -/* Field definitions for the mode/extended mode register - extended - * mode register access - */ -#define MODE_X_DLL_SHIFT 18 /* DLL enable/disable */ -#define MODE_X_DS_SHIFT 19 /* Drive strength normal/reduced */ -#define MODE_X_QFC_SHIFT 20 /* QFC function (whatever that is) */ -#define MODE_X_OPMODE_SHIFT 21 - -#define MODE_EXTENDED (1<<MODE_REG_SHIFT) -#define MODE_X_DLL_ENABLE 0 -#define MODE_X_DLL_DISABLE (1<<MODE_X_DLL_SHIFT) -#define MODE_X_DS_NORMAL 0 -#define MODE_X_DS_REDUCED (1<<MODE_X_DS_SHIFT) -#define MODE_X_QFC_DISABLED 0 -#define MODE_X_OPMODE(value) ((value)<<MODE_X_OPMODE_SHIFT) - -#ifndef __ASSEMBLY__ -/* - * DMA control/status registers. - */ -struct mpc8220_dma { - u32 taskBar; /* DMA + 0x00 */ - u32 currentPointer; /* DMA + 0x04 */ - u32 endPointer; /* DMA + 0x08 */ - u32 variablePointer;/* DMA + 0x0c */ - - u8 IntVect1; /* DMA + 0x10 */ - u8 IntVect2; /* DMA + 0x11 */ - u16 PtdCntrl; /* DMA + 0x12 */ - - u32 IntPend; /* DMA + 0x14 */ - u32 IntMask; /* DMA + 0x18 */ - - u16 tcr_0; /* DMA + 0x1c */ - u16 tcr_1; /* DMA + 0x1e */ - u16 tcr_2; /* DMA + 0x20 */ - u16 tcr_3; /* DMA + 0x22 */ - u16 tcr_4; /* DMA + 0x24 */ - u16 tcr_5; /* DMA + 0x26 */ - u16 tcr_6; /* DMA + 0x28 */ - u16 tcr_7; /* DMA + 0x2a */ - u16 tcr_8; /* DMA + 0x2c */ - u16 tcr_9; /* DMA + 0x2e */ - u16 tcr_a; /* DMA + 0x30 */ - u16 tcr_b; /* DMA + 0x32 */ - u16 tcr_c; /* DMA + 0x34 */ - u16 tcr_d; /* DMA + 0x36 */ - u16 tcr_e; /* DMA + 0x38 */ - u16 tcr_f; /* DMA + 0x3a */ - - u8 IPR0; /* DMA + 0x3c */ - u8 IPR1; /* DMA + 0x3d */ - u8 IPR2; /* DMA + 0x3e */ - u8 IPR3; /* DMA + 0x3f */ - u8 IPR4; /* DMA + 0x40 */ - u8 IPR5; /* DMA + 0x41 */ - u8 IPR6; /* DMA + 0x42 */ - u8 IPR7; /* DMA + 0x43 */ - u8 IPR8; /* DMA + 0x44 */ - u8 IPR9; /* DMA + 0x45 */ - u8 IPR10; /* DMA + 0x46 */ - u8 IPR11; /* DMA + 0x47 */ - u8 IPR12; /* DMA + 0x48 */ - u8 IPR13; /* DMA + 0x49 */ - u8 IPR14; /* DMA + 0x4a */ - u8 IPR15; /* DMA + 0x4b */ - u8 IPR16; /* DMA + 0x4c */ - u8 IPR17; /* DMA + 0x4d */ - u8 IPR18; /* DMA + 0x4e */ - u8 IPR19; /* DMA + 0x4f */ - u8 IPR20; /* DMA + 0x50 */ - u8 IPR21; /* DMA + 0x51 */ - u8 IPR22; /* DMA + 0x52 */ - u8 IPR23; /* DMA + 0x53 */ - u8 IPR24; /* DMA + 0x54 */ - u8 IPR25; /* DMA + 0x55 */ - u8 IPR26; /* DMA + 0x56 */ - u8 IPR27; /* DMA + 0x57 */ - u8 IPR28; /* DMA + 0x58 */ - u8 IPR29; /* DMA + 0x59 */ - u8 IPR30; /* DMA + 0x5a */ - u8 IPR31; /* DMA + 0x5b */ - - u32 res1; /* DMA + 0x5c */ - u32 res2; /* DMA + 0x60 */ - u32 res3; /* DMA + 0x64 */ - u32 MDEDebug; /* DMA + 0x68 */ - u32 ADSDebug; /* DMA + 0x6c */ - u32 Value1; /* DMA + 0x70 */ - u32 Value2; /* DMA + 0x74 */ - u32 Control; /* DMA + 0x78 */ - u32 Status; /* DMA + 0x7c */ - u32 EU00; /* DMA + 0x80 */ - u32 EU01; /* DMA + 0x84 */ - u32 EU02; /* DMA + 0x88 */ - u32 EU03; /* DMA + 0x8c */ - u32 EU04; /* DMA + 0x90 */ - u32 EU05; /* DMA + 0x94 */ - u32 EU06; /* DMA + 0x98 */ - u32 EU07; /* DMA + 0x9c */ - u32 EU10; /* DMA + 0xa0 */ - u32 EU11; /* DMA + 0xa4 */ - u32 EU12; /* DMA + 0xa8 */ - u32 EU13; /* DMA + 0xac */ - u32 EU14; /* DMA + 0xb0 */ - u32 EU15; /* DMA + 0xb4 */ - u32 EU16; /* DMA + 0xb8 */ - u32 EU17; /* DMA + 0xbc */ - u32 EU20; /* DMA + 0xc0 */ - u32 EU21; /* DMA + 0xc4 */ - u32 EU22; /* DMA + 0xc8 */ - u32 EU23; /* DMA + 0xcc */ - u32 EU24; /* DMA + 0xd0 */ - u32 EU25; /* DMA + 0xd4 */ - u32 EU26; /* DMA + 0xd8 */ - u32 EU27; /* DMA + 0xdc */ - u32 EU30; /* DMA + 0xe0 */ - u32 EU31; /* DMA + 0xe4 */ - u32 EU32; /* DMA + 0xe8 */ - u32 EU33; /* DMA + 0xec */ - u32 EU34; /* DMA + 0xf0 */ - u32 EU35; /* DMA + 0xf4 */ - u32 EU36; /* DMA + 0xf8 */ - u32 EU37; /* DMA + 0xfc */ -}; - -/* - * PCI Header Registers - */ -typedef struct mpc8220_xcpci { - u32 dev_ven_id; /* 0xb00 - device/vendor ID */ - u32 stat_cmd_reg; /* 0xb04 - status command register */ - u32 class_code_rev_id; /* 0xb08 - class code / revision ID */ - u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */ - u32 base0; /* 0xb10 - base address 0 */ - u32 base1; /* 0xb14 - base address 1 */ - u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */ - u32 cis; /* 0xb28 - cardBus CIS pointer */ - u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */ - u32 reserved2; /* 0xb30 - expansion ROM base address */ - u32 reserved3; /* 0xb00 - reserved */ - u32 reserved4; /* 0xb00 - reserved */ - u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */ - u32 reserved5[8]; - /* MPC8220 specific - not accessible in PCI header space externally */ - u32 glb_stat_ctl; /* 0xb60 - Global Status Control */ - u32 target_bar0; /* 0xb64 - Target Base Address 0 */ - u32 target_bar1; /* 0xb68 - Target Base Address 1 */ - u32 target_ctrl; /* 0xb6c - Target Control */ - u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */ - u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */ - u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */ - u32 reserved6; /* 0xb7c - reserved */ - u32 init_win_cfg; /* 0xb80 */ - u32 init_ctrl; /* 0xb84 */ - u32 init_stat; /* 0xb88 */ - u32 reserved7[27]; - u32 cfg_adr; /* 0xbf8 */ - u32 reserved8; -} mpc8220_xcpci_t; - -/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB, - reg1 - 1GB */ -#define PCI_BASE_ADDR_REG0 0x40000000 -#define PCI_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_REG0 (CONFIG_SYS_MBAR) -#define PCI_TARGET_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_EN 1<<0 - - -/* PCI Global Status/Control Register (PCIGSCR) */ -#define PCI_GLB_STAT_CTRL_PE_SHIFT 29 -#define PCI_GLB_STAT_CTRL_SE_SHIFT 28 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13 -#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12 -#define PCI_GLB_STAT_CTRL_PR_SHIFT 0 - -#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT) -#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT) -#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT) -#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT) -#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT) - -/* PCI Target Control Register (PCITCR) */ -#define PCI_TARGET_CTRL_LD_SHIFT 24 -#define PCI_TARGET_CTRL_P_SHIFT 16 - -#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT) -#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT) - -/* PCI Initiator Window Configuration Register (PCIIWCR) */ -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8 - -#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2 - -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT) - -/* PCI Initiator Control Register (PCIICR) */ -#define PCI_INIT_CTRL_REE_SHIFT 26 -#define PCI_INIT_CTRL_IAE_SHIFT 25 -#define PCI_INIT_CTRL_TAE_SHIFT 24 -#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0 -#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff - -#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT) -#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT) -#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT) - -/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */ -#define PCI_STAT_CMD_PE_SHIFT 31 -#define PCI_STAT_CMD_SE_SHIFT 30 -#define PCI_STAT_CMD_MA_SHIFT 29 -#define PCI_STAT_CMD_TR_SHIFT 28 -#define PCI_STAT_CMD_TS_SHIFT 27 -#define PCI_STAT_CMD_DT_SHIFT 25 -#define PCI_STAT_CMD_DT_MASK 0x3 -#define PCI_STAT_CMD_DP_SHIFT 24 -#define PCI_STAT_CMD_FC_SHIFT 23 -#define PCI_STAT_CMD_R_SHIFT 22 -#define PCI_STAT_CMD_66M_SHIFT 21 -#define PCI_STAT_CMD_C_SHIFT 20 -#define PCI_STAT_CMD_F_SHIFT 9 -#define PCI_STAT_CMD_S_SHIFT 8 -#define PCI_STAT_CMD_ST_SHIFT 7 -#define PCI_STAT_CMD_PER_SHIFT 6 -#define PCI_STAT_CMD_V_SHIFT 5 -#define PCI_STAT_CMD_MW_SHIFT 4 -#define PCI_STAT_CMD_SP_SHIFT 3 -#define PCI_STAT_CMD_B_SHIFT 2 -#define PCI_STAT_CMD_M_SHIFT 1 -#define PCI_STAT_CMD_IO_SHIFT 0 - -#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT) -#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT) -#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT) -#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT) -#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT) -#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT) -#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT) -#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT) -#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT) -#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT) -#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT) -#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT) -#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT) -#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT) -#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT) -#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT) -#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT) -#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT) -#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT) -#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT) - -/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */ -#define PCI_CFG1_HT_SHIFT 16 -#define PCI_CFG1_HT_MASK 0xff -#define PCI_CFG1_LT_SHIFT 8 -#define PCI_CFG1_LT_MASK 0xff -#define PCI_CFG1_CLS_SHIFT 0 -#define PCI_CFG1_CLS_MASK 0xf - -/* function prototypes */ -void loadtask(int basetask, int tasks); -u32 dramSetup(void); - -#if defined(CONFIG_PSC_CONSOLE) -int psc_serial_init (void); -void psc_serial_putc(const char c); -void psc_serial_puts (const char *s); -int psc_serial_getc(void); -int psc_serial_tstc(void); -void psc_serial_setbrg(void); -#endif - -#if defined (CONFIG_EXTUART_CONSOLE) -int ext_serial_init (void); -void ext_serial_putc(const char c); -void ext_serial_puts (const char *s); -int ext_serial_getc(void); -int ext_serial_tstc(void); -void ext_serial_setbrg(void); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __MPC8220_H__ */ diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 966b5e00cac..b644b91773f 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -129,12 +129,16 @@ typedef union { } cfiword_t; /* CFI standard query structure */ +/* The offsets and sizes of this packed structure members correspond + * to the actual layout in CFI Flash chips. Some 16- and 32-bit members + * are unaligned and must be accessed with explicit unaligned access macros. + */ struct cfi_qry { u8 qry[3]; - u16 p_id; - u16 p_adr; - u16 a_id; - u16 a_adr; + u16 p_id; /* unaligned */ + u16 p_adr; /* unaligned */ + u16 a_id; /* unaligned */ + u16 a_adr; /* unaligned */ u8 vcc_min; u8 vcc_max; u8 vpp_min; @@ -148,10 +152,10 @@ struct cfi_qry { u8 block_erase_timeout_max; u8 chip_erase_timeout_max; u8 dev_size; - u16 interface_desc; - u16 max_buf_write_size; + u16 interface_desc; /* aligned */ + u16 max_buf_write_size; /* aligned */ u8 num_erase_regions; - u32 erase_region_info[NUM_ERASE_REGIONS]; + u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */ } __attribute__((packed)); struct cfi_pri_hdr { diff --git a/include/netdev.h b/include/netdev.h index 516b351ebeb..df454b50c3b 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -77,7 +77,6 @@ int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); -int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); int mvgbe_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); diff --git a/include/palmas.h b/include/palmas.h index 3b185896d63..aff48b5dfcb 100644 --- a/include/palmas.h +++ b/include/palmas.h @@ -26,17 +26,90 @@ #include <common.h> #include <i2c.h> -/* I2C chip addresses */ -#define PALMAS_CHIP_ADDR 0x48 +/* I2C chip addresses, TW6035/37 */ +#define TWL603X_CHIP_P1 0x48 /* Page 1 */ +#define TWL603X_CHIP_P2 0x49 /* Page 2 */ +#define TWL603X_CHIP_P3 0x4a /* Page 3 */ -/* 0x1XY translates to page 1, register address 0xXY */ +/* TPS659038/39 */ +#define TPS65903X_CHIP_P1 0x58 /* Page 1 */ + +/* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */ + +/* LDO1 control/voltage */ +#define LDO1_CTRL 0x50 +#define LDO1_VOLTAGE 0x51 + +/* LDO9 control/voltage */ #define LDO9_CTRL 0x60 #define LDO9_VOLTAGE 0x61 -/* Bit field definitions for LDOx_CTRL */ -#define LDO_ON (1 << 4) -#define LDO_MODE_SLEEP (1 << 2) -#define LDO_MODE_ACTIVE (1 << 0) +/* LDOUSB control/voltage */ +#define LDOUSB_CTRL 0x64 +#define LDOUSB_VOLTAGE 0x65 + +/* Control of 32 kHz audio clock */ +#define CLK32KGAUDIO_CTRL 0xd5 + +/* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */ +#define SYSEN2_CTRL 0xd9 + +/* + * Bit field definitions for LDOx_CTRL, SYSENx_CTRL + * and some other xxx_CTRL resources: + */ +#define LDO9_BYP_EN (1 << 6) /* LDO9 only! */ +#define RSC_STAT_ON (1 << 4) /* RO status bit! */ +#define RSC_MODE_SLEEP (1 << 2) +#define RSC_MODE_ACTIVE (1 << 0) + +/* Some LDO voltage values */ +#define LDO_VOLT_OFF 0 +#define LDO_VOLT_1V8 0x13 +#define LDO_VOLT_3V0 0x2b +#define LDO_VOLT_3V3 0x31 +/* Request bypass, LDO9 only */ +#define LDO9_BYPASS 0x3f + +/* SMPS7_CTRL */ +#define SMPS7_CTRL 0x30 + +/* SMPS9_CTRL */ +#define SMPS9_CTRL 0x38 +#define SMPS9_VOLTAGE 0x3b + +/* Bit field definitions for SMPSx_CTRL */ +#define SMPS_MODE_ACT_AUTO 1 +#define SMPS_MODE_ACT_ECO 2 +#define SMPS_MODE_ACT_FPWM 3 +#define SMPS_MODE_SLP_AUTO (1 << 2) +#define SMPS_MODE_SLP_ECO (2 << 2) +#define SMPS_MODE_SLP_FPWM (3 << 2) + +/* + * Some popular SMPS voltages, all with RANGE=1; note + * that RANGE cannot be changed on the fly + */ +#define SMPS_VOLT_OFF 0 +#define SMPS_VOLT_1V2 0x90 +#define SMPS_VOLT_1V8 0xae +#define SMPS_VOLT_2V1 0xbd +#define SMPS_VOLT_3V0 0xea +#define SMPS_VOLT_3V3 0xf9 + +/* Backup Battery & VRTC Control */ +#define BB_VRTC_CTRL 0xa8 +/* Bit definitions for BB_VRTC_CTRL */ +#define VRTC_EN_SLP (1 << 6) +#define VRTC_EN_OFF (1 << 5) +#define VRTC_PWEN (1 << 4) +#define BB_LOW_ICHRG (1 << 3) +#define BB_HIGH_ICHRG (0 << 3) +#define BB_VSEL_3V0 (0 << 1) +#define BB_VSEL_2V5 (1 << 1) +#define BB_VSEL_3V15 (2 << 1) +#define BB_VSEL_VBAT (3 << 1) +#define BB_CHRG_EN (1 << 0) /* * Functions to read and write from TPS659038/TWL6035/TWL6037 @@ -54,5 +127,8 @@ static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) void palmas_init_settings(void); int palmas_mmc1_poweron_ldo(void); +int twl603x_mmc1_set_ldo9(u8 vsel); +int twl603x_audio_power(u8 on); +int twl603x_enable_bb_charge(u8 bb_fields); #endif /* PALMAS_H */ diff --git a/include/phy.h b/include/phy.h index 7b4ce744e11..75bf3b4728d 100644 --- a/include/phy.h +++ b/include/phy.h @@ -52,6 +52,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, @@ -67,6 +68,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", [PHY_INTERFACE_MODE_RGMII] = "rgmii", diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h index fdc7ca9e5a0..1c374a9034c 100644 --- a/include/power/max77686_pmic.h +++ b/include/power/max77686_pmic.h @@ -157,6 +157,8 @@ enum { /* Buck1 1 volt value */ #define MAX77686_BUCK1OUT_1V 0x5 +/* Buck1 1.05 volt value */ +#define MAX77686_BUCK1OUT_1_05V 0x6 #define MAX77686_BUCK1CTRL_EN (3 << 0) /* Buck2 1.3 volt value */ #define MAX77686_BUCK2DVS1_1_3V 0x38 diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 2db4784d3b1..c0f8cc85677 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -175,7 +175,7 @@ #define IM_IMMR (IM_REGBASE+0x01a8) #define IM_SCCR (IM_REGBASE+0x0c80) -#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220) +#elif defined(CONFIG_MPC5xxx) #define HID0_ICE_BITPOS 16 #define HID0_DCE_BITPOS 17 diff --git a/include/usb.h b/include/usb.h index d79c8658840..d7b082d9f46 100644 --- a/include/usb.h +++ b/include/usb.h @@ -76,6 +76,12 @@ struct usb_interface { unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + /* + * Super Speed Device will have Super Speed Endpoint + * Companion Descriptor (section 9.6.7 of usb 3.0 spec) + * Revision 1.0 June 6th 2011 + */ + struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); /* Configuration information.. */ diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544b21b..4f3601a16c3 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,18 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 + +/* + * Changes to Port feature numbers for Super speed, + * from USB 3.0 spec Table 10-8 + */ +#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 +#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 +#define USB_SS_PORT_FEAT_C_LINK_STATE 25 +#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 +#define USB_SS_PORT_FEAT_BH_RESET 28 +#define USB_SS_PORT_FEAT_C_BH_RESET 29 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001 @@ -218,9 +242,19 @@ #define USB_PORT_STAT_POWER 0x0100 #define USB_PORT_STAT_LOW_SPEED 0x0200 #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SPEED \ +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK \ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) +/* + * Changes to wPortStatus bit field in USB 3.0 + * See USB 3.0 spec Table 10-11 + */ +#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 + /* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001 #define USB_PORT_STAT_C_ENABLE 0x0002 @@ -228,13 +262,21 @@ #define USB_PORT_STAT_C_OVERCURRENT 0x0008 #define USB_PORT_STAT_C_RESET 0x0010 +/* + * Changes to wPortChange bit fields in USB 3.0 + * See USB 3.0 spec Table 10-12 + */ +#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 +#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 + /* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003 #define HUB_CHAR_COMPOUND 0x0004 #define HUB_CHAR_OCPM 0x0018 /* - *Hub Status & Hub Change bit masks + * Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001 #define HUB_STATUS_OVERCURRENT 0x0002 diff --git a/include/watchdog.h b/include/watchdog.h index 97ec186be32..d95e4b164d8 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -108,8 +108,7 @@ int init_func_watchdog_reset(void); void reset_4xx_watchdog(void); #endif -/* Freescale i.MX */ -#if defined(CONFIG_IMX_WATCHDOG) && !defined(__ASSEMBLY__) +#if defined(CONFIG_HW_WATCHDOG) && !defined(__ASSEMBLY__) void hw_watchdog_init(void); #endif #endif /* _WATCHDOG_H_ */ |