diff options
Diffstat (limited to 'include/usb')
-rw-r--r-- | include/usb/ehci-fsl.h | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h new file mode 100644 index 00000000000..c429af12534 --- /dev/null +++ b/include/usb/ehci-fsl.h @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2005 freescale semiconductor + * Copyright (c) 2005 MontaVista Software + * Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EHCI_FSL_H +#define _EHCI_FSL_H + +/* Global offsets */ +#define FSL_SKIP_PCI 0x100 + +/* offsets for the non-ehci registers in the FSL SOC USB controller */ +#define FSL_SOC_USB_ULPIVP 0x170 +#define FSL_SOC_USB_PORTSC1 0x184 +#define PORT_PTS_MSK (3 << 30) +#define PORT_PTS_UTMI (0 << 30) +#define PORT_PTS_ULPI (2 << 30) +#define PORT_PTS_SERIAL (3 << 30) +#define PORT_PTS_PTW (1 << 28) + +/* USBMODE Register bits */ +#define CM_IDLE (0 << 0) +#define CM_RESERVED (1 << 0) +#define CM_DEVICE (2 << 0) +#define CM_HOST (3 << 0) +#define USBMODE_RESERVED_2 (0 << 2) +#define SLOM (1 << 3) +#define SDIS (1 << 4) + +/* CONTROL Register bits */ +#define ULPI_INT_EN (1 << 0) +#define WU_INT_EN (1 << 1) +#define USB_EN (1 << 2) +#define LSF_EN (1 << 3) +#define KEEP_OTG_ON (1 << 4) +#define OTG_PORT (1 << 5) +#define REFSEL_12MHZ (0 << 6) +#define REFSEL_16MHZ (1 << 6) +#define REFSEL_48MHZ (2 << 6) +#define PLL_RESET (1 << 8) +#define UTMI_PHY_EN (1 << 9) +#define PHY_CLK_SEL_UTMI (0 << 10) +#define PHY_CLK_SEL_ULPI (1 << 10) +#define CLKIN_SEL_USB_CLK (0 << 11) +#define CLKIN_SEL_USB_CLK2 (1 << 11) +#define CLKIN_SEL_SYS_CLK (2 << 11) +#define CLKIN_SEL_SYS_CLK2 (3 << 11) +#define RESERVED_18 (0 << 13) +#define RESERVED_17 (0 << 14) +#define RESERVED_16 (0 << 15) +#define WU_INT (1 << 16) +#define PHY_CLK_VALID (1 << 17) + +#define FSL_SOC_USB_PORTSC2 0x188 +#define FSL_SOC_USB_USBMODE 0x1a8 +#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */ +#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */ +#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */ +#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ +#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ +#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define SNOOP_SIZE_2GB 0x1e + +/* System Clock Control Register */ +#define MPC83XX_SCCR_USB_MASK 0x00f00000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +#endif /* _EHCI_FSL_H */ |