diff options
Diffstat (limited to 'include/linux/usb/ch9.h')
-rw-r--r-- | include/linux/usb/ch9.h | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h new file mode 100644 index 00000000000..1091692e98e --- /dev/null +++ b/include/linux/usb/ch9.h @@ -0,0 +1,587 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + * + * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and + * Remy Bohmer <linux@bohmer.net> + */ + +#ifndef __LINUX_USB_CH9_H +#define __LINUX_USB_CH9_H + +#include <linux/types.h> /* __u8 etc */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +#if defined(__BIG_ENDIAN) || defined(__ARMEB__) +#error (functionality not verified for big endian targets, todo...) +#endif + +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". But when exposed through Linux-USB APIs, + * they've been converted to cpu byte order. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of wireless capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ +}; + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + */ +}; + +#endif /* __LINUX_USB_CH9_H */ |