diff options
Diffstat (limited to 'include/configs')
85 files changed, 540 insertions, 460 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 838a0b18c38..dca1ca5abda 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -391,7 +391,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 6aaaaa43f0f..047ed8b1bb3 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -198,7 +198,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 59a8d1b5d17..ceee0e4d49d 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -320,7 +320,6 @@ combinations. this should be removed later /* NAND */ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index e24b9233687..7c45c3617ae 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -234,7 +234,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 66303773c32..9390464b10d 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -14,9 +14,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF520x /* define processor family */ -#define CONFIG_M5208 /* define processor type */ - #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index cde7305954e..e9424b4a07c 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5227x /* define processor family */ -#define CONFIG_M52277 /* define processor type */ #define CONFIG_M52277EVB /* M52277EVB board */ #define CONFIG_MCFUART diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 0f6e2f72cf0..883347b0fd8 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF523x /* define processor family */ -#define CONFIG_M5235 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index ae4fe45fce4..60e5b45942a 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5249 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 3a1cbcae936..7421b57b0f0 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -7,8 +7,6 @@ #ifndef _M5253DEMO_H #define _M5253DEMO_H -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5253 /* define processor type */ #define CONFIG_M5253DEMO /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index fabfdb93dbd..8fd3907ad88 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -8,8 +8,6 @@ #ifndef _M5253EVBE_H #define _M5253EVBE_H -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5253 /* define processor type */ #define CONFIG_M5253EVBE /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 4c84126559d..2c056b114b5 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -17,9 +17,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 4dddab7c1df..7eb31722daf 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,8 +21,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5275 /* define processor type */ #define CONFIG_M5275EVB /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index fd970d0787f..569ad4201e1 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -17,9 +17,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index a100d9f3162..e3fa85655bb 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5301x /* define processor family */ -#define CONFIG_M53015 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) @@ -202,7 +200,7 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_BASE + 0x40000) #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_SECT_SIZE 0x8000 #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 78ea3843755..795f3592b6d 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5329 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 849c26562a4..d75b43cdd33 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5373 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 3d7dc1fb2dd..3a6e9811d51 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5441x /* define processor family */ -#define CONFIG_M54418 /* define processor type */ #define CONFIG_M54418TWR /* M54418TWR board */ #define CONFIG_MCFUART @@ -55,7 +53,6 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NAND_YAFFS #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PING diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 734a77fb4ff..1b3598a092c 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5445x /* define processor family */ -#define CONFIG_M54451 /* define processor type */ #define CONFIG_M54451EVB /* M54451EVB board */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 2faf58156d8..2288bff56d4 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5445x /* define processor family */ -#define CONFIG_M54455 /* define processor type */ #define CONFIG_M54455EVB /* M54455EVB board */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 2f4549f2707..91d6a1ada92 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF547x_8x /* define processor family */ -#define CONFIG_M547x /* define processor type */ -#define CONFIG_M5475 /* define processor type */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 9aa02f7c6c6..ce9f3b01b2e 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF547x_8x /* define processor family */ -#define CONFIG_M548x /* define processor type */ -#define CONFIG_M5485 /* define processor type */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d9a19c3694a..9cea76ae9b9 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -272,7 +272,6 @@ "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 1384f360bdf..fbf38c88d9f 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -245,7 +245,6 @@ "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 85f5c40edef..521904daad6 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -283,7 +283,6 @@ * NAND Flash on the Local Bus */ #define CONFIG_CMD_NAND 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_NAND_FSL_ELBC 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 27221648e42..dc09b1f8704 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -308,7 +308,6 @@ CONFIG_SYS_NAND_BASE + 0x80000, \ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 4da247c51ae..e624c717ffa 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -194,7 +194,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 0b07876e780..5e7bc49dcf4 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -303,7 +303,6 @@ CONFIG_SYS_NAND_BASE + 0x80000,\ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index cd6a39c6571..ccf3ce3bac9 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -444,7 +444,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1010RDB_PA) diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 437111070da..795e3b5e186 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -290,7 +290,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index a8b7817a8ef..d65c461fda5 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -136,7 +136,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index d8d30bb2805..f99da6562aa 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -251,7 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 3f02cede320..2927043df49 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -398,7 +398,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index bd40d6ac93c..84e8336a724 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -379,7 +379,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 92f5f56718c..faf8c9dc7ec 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -308,7 +308,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 52633181ad4..6cc95ef2d10 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -341,7 +341,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index ff6d2c1d37e..046aa48baa1 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -357,7 +357,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index db6b42ea0f1..faaf22c9bf3 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -328,7 +328,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index dd7d52f293a..cfe6557caa1 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -281,7 +281,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b644a6ce8be..c1ad35a018b 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -467,7 +467,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 94078f54819..6aee6db3f38 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -62,7 +62,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_BSP #define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_YAFFS #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 73e1b0afa80..d5b6e37a38f 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -10,6 +10,8 @@ #ifndef __AMCC_COMMON_H #define __AMCC_COMMON_H +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ #define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1) diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 2a785b3fc31..229fa5a6c2d 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -12,11 +12,6 @@ #define CONFIG_AMCORE #define CONFIG_HOSTNAME AMCORE -#define CONFIG_SYS_GENERIC_BOARD - -#define CONFIG_MCF530x -#define CONFIG_M5307 - #define CONFIG_MCFTMR #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT 0 diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index fa64a688a44..de837cfe08b 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -39,16 +39,6 @@ #error No card type defined! #endif -/* - * Define processor - * possible values for Urmel board: only Coldfire M5373 processor supported - * (please do not change) - */ - -/* it seems not clear yet which processor defines we should use */ -#define CONFIG_MCF537x /* define processor family */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5373 /* define processor type */ #define CONFIG_ASTRO5373L /* define board type */ /* Command line configuration */ diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h new file mode 100644 index 00000000000..dedb7857ad9 --- /dev/null +++ b/include/configs/at91-sama5_common.h @@ -0,0 +1,87 @@ +/* + * Common part of configuration settings for the AT91 SAMA5 board. + * + * Copyright (C) 2015 Atmel Corporation + * Josh Wu <josh.wu@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AT91_SAMA5_COMMON_H +#define __AT91_SAMA5_COMMON_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* Device Tree support */ + +#define CONFIG_SYS_GENERIC_BOARD + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mmcblk0p2 rw rootwait" +#else +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256K(env),256k(evn_redundent),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +#endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index db5d5ea846b..e4c49f4c147 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -203,4 +203,62 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SYS_USE_MMC + +#define CONFIG_SPL_BSS_START_ADDR 0x70000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } +#endif + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0 #endif diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index f02fce95b39..c44da1c19e5 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -201,11 +201,22 @@ #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ + +#ifdef CONFIG_ENV_IS_IN_MMC +/* Use raw reserved sectors to save environment */ #define CONFIG_ENV_OFFSET 0x2000 #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_SYS_MMC_ENV_DEV 0 +#else +/* Use file in FAT file to save environment */ +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 +#endif + #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ "fatload mmc 0:1 0x21000000 dtb;" \ @@ -228,6 +239,62 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x6000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20953f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SPIFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 + +#endif #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 6d8b71dceda..1a481b3fd12 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -243,4 +243,61 @@ */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x6000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SPIFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 + +#endif + #endif diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 7a1499d2e3a..ed790ccaf3a 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -13,8 +13,6 @@ #include <linux/kconfig.h> -#define CONFIG_SYS_GENERIC_BOARD - /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 464436930db..b9f0b0b123a 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -25,16 +25,6 @@ #define _CONFIG_COBRA5272_H /* --- - * Define processor - * possible values for Sentec board: only Coldfire M5272 processor supported - * (please do not change) - * --- - */ - -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ - -/* --- * Defines processor clock - important for correct timings concerning serial * interface etc. * --- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 225ffdd0a5b..8e27ae4b728 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -248,7 +248,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index ace511f7653..f5b8f9b4421 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -16,9 +16,6 @@ #include <asm/hardware.h> -#define MACH_TYPE_CORVUS 2066 - -#define CONFIG_MACH_TYPE MACH_TYPE_CORVUS #define CONFIG_SYS_GENERIC_BOARD /* * Warning: changing CONFIG_SYS_TEXT_BASE requires diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h index b927b1c9f54..df32f2ac528 100644 --- a/include/configs/crownbay.h +++ b/include/configs/crownbay.h @@ -52,8 +52,20 @@ #define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* Topcliff Gigabit Ethernet */ +#define CONFIG_PCH_GBE +#define CONFIG_PHYLIB + /* Video is not supported */ #undef CONFIG_VIDEO #undef CONFIG_CFB_CONSOLE +/* Environment configuration */ +#undef CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0 + #endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 8a7447dcd3d..56317ef5e70 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -15,7 +15,6 @@ #define CONFIG_DBAU1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_DBAU1000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index dee2b11056e..8fe0e6c16ae 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -77,6 +77,7 @@ #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 +#define CONFIG_QSPI_QUAD_SUPPORT /* * Default to using SPI for environment, etc. diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index bdca7058747..e2b93268b4c 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -15,9 +15,6 @@ * High Level Configuration Options (easy to change) * *----------------------------------------------------------------------*/ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ - #define CONFIG_MISC_INIT_R #define CONFIG_MCFUART diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index ce61a1621c0..b79000e706a 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -153,7 +153,6 @@ /* JFFS2 */ #ifdef CONFIG_CMD_JFFS2 -#define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_NAND #endif diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d745f4eb89b..288acf30f1b 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -57,4 +57,17 @@ #define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* 10/100M Ethernet support */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHYLIB + +/* Environment configuration */ +#undef CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0 + #endif /* __CONFIG_H */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 2384864eb02..c1ca56c692e 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -214,7 +214,6 @@ #define CONFIG_SYS_NAND_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_PAGE_SIZE (2048) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 949b3dadb38..b70b5b19f5c 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -167,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 3dc4da391b3..5de416d117b 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -251,7 +251,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index f80efedeb2f..e0435cc0a7a 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/malta.h b/include/configs/malta.h index 354672ecf87..9445c9b1d72 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -14,7 +14,6 @@ * System configuration */ #define CONFIG_MALTA -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 21c654b6b12..dad49f96df4 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -249,4 +249,11 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ #endif +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 7378acdb210..e97c5e30da5 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -43,8 +43,13 @@ #define CONFIG_CMD_GPIO /* ENV related config options */ -#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_CMD_SAVEENV +#define CONFIG_ENV_OVERWRITE #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5f27c2a41a8..a5f97176ce7 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -494,7 +494,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1020RDB_PD) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 61e6af384d4..a1926bb64d0 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -15,7 +15,6 @@ #define CONFIG_PB1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_PB1000 diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 1548d3e682d..75da8a1ebe6 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -14,7 +14,6 @@ #define CONFIG_QEMU_MIPS -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 61cafadd7cf..b07ca4e02a4 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -14,7 +14,6 @@ #define CONFIG_QEMU_MIPS -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index e9ef7cc9802..c33f1cb8807 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* Support File sytems */ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index c82728e9993..bfd8aa7e6c2 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -10,30 +10,10 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART @@ -51,29 +31,6 @@ */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -181,34 +138,6 @@ #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index a99b559da68..d933a9e7c68 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -13,30 +13,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +/* + * If has No NOR flash, please put the definition: CONFIG_SYS_NO_FLASH + * before the common header. + */ +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART @@ -69,40 +50,17 @@ /* board specific (not enough SRAM) */ #define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - /* NOR flash */ +#ifndef CONFIG_SYS_NO_FLASH #define CONFIG_CMD_FLASH - -#ifdef CONFIG_CMD_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_BASE 0x10000000 #define CONFIG_SYS_MAX_FLASH_SECT 131 #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#else -#define CONFIG_SYS_NO_FLASH #endif -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -228,34 +186,6 @@ #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 4cb07615203..5fb621ec853 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -10,59 +10,16 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_USART3 #define CONFIG_USART_ID ATMEL_ID_USART3 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SETEXPR - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -199,33 +156,6 @@ "bootz 0x22000000 - 0x21000000" #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* SPL */ diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 897d4819f8f..546d7a3a9f3 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -10,59 +10,16 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_USART3 #define CONFIG_USART_ID ATMEL_ID_USART3 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SETEXPR - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -197,35 +154,6 @@ "bootz 0x22000000 - 0x21000000" #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h new file mode 100644 index 00000000000..46ffb7a31c9 --- /dev/null +++ b/include/configs/secomx6quq7.h @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2013 Seco S.r.l + * + * Configuration settings for the Seco Boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> +#include <linux/sizes.h> + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* MMC Configuration */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Ethernet Configuration */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ + "ip_server=10.0.0.1\0" \ + "nfs_path=/targetfs \0" \ + "memory=mem=1024M\0" \ + "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ + "root=root=/dev/mmcblk0p1\0" \ + "option=rootwait rw fixrtc rootflags=barrier=1\0" \ + "cpu_freq=arm_freq=996\0" \ + "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ + " ${option} ${memory} ${cpu_freq}\0" \ + "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ + " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ + " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ + " ${memory} ${cpu_freq}\0" \ + "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ + "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ + " bootm 0x10800000\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_ENV_OFFSET (6 * 128 * 1024) + #define CONFIG_SYS_MMC_ENV_DEV 0 + #define CONFIG_DYNAMIC_MMC_DEVNO +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 1537e536f92..7cd5c69d3a8 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,7 +11,6 @@ /* * A10 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index e7555313dbe..e0470d4282c 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,7 +11,6 @@ /* * High Level Configuration Options */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index f5e11ddb691..617c1cdfdec 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,7 +14,6 @@ /* * A31 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index f817f73076e..7fa7cec2441 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,7 +12,6 @@ /* * A20 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 912000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI @@ -21,8 +20,7 @@ #define CONFIG_ARMV7_PSCI 1 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_SYS_CLK_FREQ 24000000 -#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_TIMER_CLK_FREQ 24000000 /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 3bdedb390c1..79796d75d34 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,7 +12,6 @@ /* * A23 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/vct.h b/include/configs/vct.h index 83e4163e3f8..88e58ec54be 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -25,7 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index bce94b3fdc6..107f01a07ec 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -186,7 +186,6 @@ */ #define CONFIG_SYS_NAND_BASE 0x61000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 047514ad191..9ddb594f9c5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -17,20 +17,11 @@ #ifndef CONFIG_SEMIHOSTING #error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING #endif -#define CONFIG_BOARD_LATE_INIT #define CONFIG_ARMV8_SWITCH_TO_EL1 #endif #define CONFIG_REMAKE_ELF -#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \ - !defined(CONFIG_TARGET_VEXPRESS64_JUNO) -/* Base FVP and Juno not using GICv3 yet */ -#define CONFIG_GICV3 -#endif - -/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ - #define CONFIG_SUPPORT_RAW_INITRD /* Cache Definitions */ @@ -49,8 +40,7 @@ #define CONFIG_SYS_TEXT_BASE 0xe0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else -#define CONFIG_SYS_TEXT_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#error "Unknown board variant" #endif /* Flat Device Tree Definitions */ @@ -120,10 +110,9 @@ #define GICD_BASE (0x2C010000) #define GICC_BASE (0x2C02f000) #else -#define GICD_BASE (0x2C001000) -#define GICC_BASE (0x2C002000) -#endif +#error "Unknown board variant" #endif +#endif /* !CONFIG_GICV3 */ #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) @@ -211,12 +200,12 @@ /* Initial environment variables */ #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=uImage\0" \ - "kernel_addr_r=0x80000000\0" \ + "kernel_name=uImage\0" \ + "kernel_addr=0x80000000\0" \ "initrd_name=ramdisk.img\0" \ - "initrd_addr_r=0x88000000\0" \ - "fdt_name=devtree.dtb\0" \ - "fdt_addr_r=0x83000000\0" \ + "initrd_addr=0x88000000\0" \ + "fdt_name=devtree.dtb\0" \ + "fdt_addr=0x83000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" @@ -224,24 +213,17 @@ "0x1c090000 debug user_debug=31 "\ "loglevel=9" -#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \ - "fdt chosen $initrd_addr_r $initrd_end; " \ - "bootm $kernel_addr_r - $fdt_addr_r" +#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ + "smhload ${fdt_name} $fdt_addr; " \ + "smhload ${initrd_name} $initrd_addr initrd_end; " \ + "fdt addr $fdt_addr; fdt resize; " \ + "fdt chosen $initrd_addr $initrd_end; " \ + "bootm $kernel_addr - $fdt_addr" #define CONFIG_BOOTDELAY 1 #else - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr_r=0x80000000\0" \ - "initrd_addr_r=0x88000000\0" \ - "fdt_addr_r=0x83000000\0" \ - "fdt_high=0xa0000000\0" - -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/ram0" -#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ - "$initrd_addr_r:$initrd_size $fdt_addr_r" -#define CONFIG_BOOTDELAY -1 +#error "Unknown board variant" #endif /* Do not preserve environment */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 994874ca600..b7dd63e0600 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -243,7 +243,34 @@ #define CONFIG_CMD_USB -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_STD_DEVICES_SETTINGS +/* Default environment */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_HOSTNAME "x86" +#define CONFIG_BOOTFILE "bzImage" +#define CONFIG_LOADADDR 0x1000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_STD_DEVICES_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "othbootargs=acpi=off\0" \ + "ramdiskaddr=0x2000000\0" \ + "ramdiskfile=initramfs.gz\0" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftpboot $loadaddr $bootfile;" \ + "tftpboot $ramdiskaddr $ramdiskfile;" \ + "zboot $loadaddr 0 $ramdiskaddr $filesize" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftpboot $loadaddr $bootfile;" \ + "zboot $loadaddr" #endif /* __CONFIG_H */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index d6b61435006..988a2e8bfeb 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 4536b94e916..ac3f4f1c84a 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC |