diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/katmai.h | 415 | ||||
-rw-r--r-- | include/configs/mcc200.h | 1 | ||||
-rw-r--r-- | include/configs/mecp5200.h | 58 | ||||
-rw-r--r-- | include/configs/motionpro.h | 305 | ||||
-rw-r--r-- | include/configs/sc3.h | 2 | ||||
-rw-r--r-- | include/configs/sequoia.h | 4 |
6 files changed, 753 insertions, 32 deletions
diff --git a/include/configs/katmai.h b/include/configs/katmai.h new file mode 100644 index 00000000000..c750e146569 --- /dev/null +++ b/include/configs/katmai.h @@ -0,0 +1,415 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * katmai.h - configuration for AMCC Katmai (440SPe) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_KATMAI 1 /* Board is Katmai */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_440SPE 1 /* Specifc SPe support */ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ +#undef CONFIG_SHOW_BOOT_PROGRESS + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */ + +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ + +#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE + +#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ +#define CFG_PCIE_MEMSIZE 0x01000000 +#define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ + +#define CFG_PCIE0_CFGBASE 0xc0000000 +#define CFG_PCIE0_XCFGBASE 0xc0000400 +#define CFG_PCIE1_CFGBASE 0xc0001000 +#define CFG_PCIE1_XCFGBASE 0xc0001400 +#define CFG_PCIE2_CFGBASE 0xc0002000 +#define CFG_PCIE2_XCFGBASE 0xc0002400 + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */ + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_SERIAL_MULTI 1 +#undef CONFIG_UART1_CONSOLE +#undef CFG_EXT_SERIAL_CLOCK +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses */ +#define IIC0_DIMM0_ADDR 0x51 +#define IIC0_DIMM1_ADDR 0x52 +#undef CONFIG_STRESS +#undef ENABLE_ECC + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_SPD_BUS_NUM 0 /* The I2C bus for SPD */ + +#define IIC0_BOOTPROM_ADDR 0x50 +#define IIC0_ALT_BOOTPROM_ADDR 0x54 + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0x50) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CFG_RTC_BUS_NUM 1 /* The I2C bus for RTC */ +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ + +/* I2C DTT */ +#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ +#define CFG_DTT_BUS_NUM 1 /* The I2C bus for DTT */ +/* + * standard dtt sensor configuration - bottom bit will determine local or + * remote sensor of the ADM1021, the rest determines index into + * CFG_DTT_ADM1021 array below. + */ +#define CONFIG_DTT_SENSORS { 0, 1 } + +/* + * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). + * there will be one entry in this array for each two (dummy) sensors in + * CONFIG_DTT_SENSORS. + * + * For Katmai board: + * - only one ADM1021 + * - i2c addr 0x18 + * - conversion rate 0x02 = 0.25 conversions/second + * - ALERT ouput disabled + * - local temp sensor enabled, min set to 0 deg, max set to 85 deg + * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg + */ +#define CFG_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} } + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=katmai\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=katmai/uImage\0" \ + "kernel_addr=fff10000\0" \ + "ramdisk_addr=fff20000\0" \ + "initrd_high=30000000\0" \ + "load=tftp 200000 katmai/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b ${fileaddr} fffc0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "kozio=bootm ffc60000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_DTT | \ + CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* needed for NetConsole */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#undef CONFIG_PCI_CONFIG_HOST_BRIDGE + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#undef CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */ + +/* + * NETWORK Support (PCI): + */ +/* Support for Intel 82557/82559/82559ER chips. */ +#define CONFIG_EEPRO100 + +/*----------------------------------------------------------------------- + * Xilinx System ACE support + *----------------------------------------------------------------------*/ +#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */ +#define CFG_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */ +#define CFG_SYSTEMACE_BASE CFG_ACE_BASE +#define CONFIG_DOS_PARTITION 1 + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ + +/* Memory Bank 0 (Flash) initialization */ +#define CFG_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CFG_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* Memory Bank 1 (Xilinx System ACE controller) initialization */ +#define CFG_EBC_PB1AP 0x7F8FFE80 +#define CFG_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/*------------------------------------------------------------------------- + * Initialize EBC CONFIG - + * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + *-------------------------------------------------------------------------*/ +#define CFG_EBC_CFG (EBC_CFG_LE_UNLOCK | \ + EBC_CFG_PTD_ENABLE | \ + EBC_CFG_RTC_16PERCLK | \ + EBC_CFG_ATC_PREVIOUS | \ + EBC_CFG_DTC_PREVIOUS | \ + EBC_CFG_CTC_PREVIOUS | \ + EBC_CFG_OEO_PREVIOUS | \ + EBC_CFG_EMC_DEFAULT | \ + EBC_CFG_PME_DISABLE | \ + EBC_CFG_PR_16) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index f60973b26d5..621a81c9c56 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -265,6 +265,7 @@ */ #if !defined(CONFIG_PRS200) #define CONFIG_LCD 1 +#define CONFIG_PROGRESSBAR 1 #endif #if defined(CONFIG_LCD) diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index ccb02933294..0c1029426c2 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -88,10 +88,10 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #else -#define ADD_USB_CMD 0 +#define ADD_USB_CMD 0 #endif /* @@ -100,7 +100,7 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_EEPROM | \ CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ + CFG_CMD_EXT2 | \ CFG_CMD_I2C | \ CFG_CMD_IDE | \ CFG_CMD_BSP | \ @@ -110,11 +110,11 @@ #include <cmd_confdefs.h> #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT16 1 #endif #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT08 1 #endif @@ -131,20 +131,20 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=mecp5200.esd\0" \ - "script=mecp5200.bat\0" \ - "image=/tftpboot/vxWorks_mecp5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ + "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ + "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ + "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ + "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ + "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ + "loadaddr=01000000\0" \ + "serverip=192.168.2.99\0" \ + "gatewayip=10.0.0.79\0" \ + "user=mu\0" \ + "target=mecp5200.esd\0" \ + "script=mecp5200.bat\0" \ + "image=/tftpboot/vxWorks_mecp5200\0" \ + "ipaddr=10.0.13.196\0" \ + "netmask=255.255.0.0\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_vxworks0" @@ -171,12 +171,12 @@ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 +#define CFG_I2C_MULTI_EEPROMS 1 /* * Flash configuration */ #define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000) #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 512 @@ -200,15 +200,15 @@ #define CONFIG_ENV_OVERWRITE 1 #endif -#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #if 0 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #endif -#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ +#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* @@ -272,7 +272,7 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ @@ -339,7 +339,7 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 #endif /* __CONFIG_H */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h new file mode 100644 index 00000000000..5328e8d6b1c --- /dev/null +++ b/include/configs/motionpro.h @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +/* + * High Level Configuration Options + */ + + +/* CPU and board */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ + + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_REGINFO | \ + CFG_CMD_IMMAP | \ + CFG_CMD_ELF | \ + CFG_CMD_MII | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_NET | \ + CFG_CMD_PING) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_NETCONSOLE 1 /* network console */ +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x2 +#define CONFIG_PHY_TYPE 0x79c874 + + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b" +#define DEBUG_BOOTKEYS 0 +#undef CONFIG_AUTOBOOT_DELAY_STR +#undef CONFIG_BOOTARGS +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ + "press \"<Esc><Esc>\" to stop\n" + +#define CONFIG_ETHADDR 00:50:C2:40:10:00 +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "sdram_test=0\0" \ + "netdev=eth0\0" \ + "hostname=motionpro\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.22\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "kernel_addr=200000\0" \ + "u-boot_addr=100000\0" \ + "kernel_sector=20\0" \ + "kernel_size=1000\0" \ + "console=ttyS0,115200\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ + "load=tftp $(u-boot_addr) $(u-boot)\0" \ + "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ + "cp.b $(u-boot_addr) fff00000 $(filesize);" \ + "prot on fff00000 fff3ffff\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) console=$(console) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;bootm $(kernel_addr) " \ + "$(ramdisk_addr)\0" \ + "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ + "bootm $(kernel_addr)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "fstype=ext3\0" \ + "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + + +/* + * do board-specific init + */ +#define CONFIG_BOARD_EARLY_INIT_R 1 + + +/* + * Low level configuration + */ + + +/* + * Clock configuration: SYS_XTALIN = 25MHz + */ +#define CFG_MPC5XXX_CLKIN 25000000 + + +/* + * Memory map + */ +/* + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000. + * Setting MBAR to otherwise will cause system hang when using SmartDMA such + * as network commands. + */ +#define CFG_MBAR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 + +/* + * If building for running out of SDRAM, then MBAR has been set up beforehand + * (e.g., by the BDI). Otherwise we must specify the default boot-up value of + * MBAR, as given in the doccumentation. + */ +#if TEXT_BASE == 0x00100000 +#define CFG_DEFAULT_MBAR 0xf0000000 +#else /* TEXT_BASE != 0x00100000 */ +#define CFG_DEFAULT_MBAR 0x80000000 +#define CFG_LOWBOOT 1 +#endif /* TEXT_BASE == 0x00100000 */ + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x03035D00 + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_CS0_CFG CFG_BOOTCS_CFG + +/* Dual Port SRAM -- Kollmorgen Drive memory addressing */ +#define CFG_CS1_START 0x50000000 +#define CFG_CS1_SIZE 0x10000 +#define CFG_CS1_CFG 0x05055800 + +/* Local register access */ +#define CFG_CS2_START 0x50010000 +#define CFG_CS2_SIZE 0x10000 +#define CFG_CS2_CFG 0x05055800 + +/* Anybus CompactCom Module memory addressing */ +#define CFG_CS3_START 0x50020000 +#define CFG_CS3_SIZE 0x10000 +#define CFG_CS3_CFG 0x05055800 + +/* No burst and dead cycle = 2 for all CSs */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x22222222 + + +/* + * SDRAM configuration + */ +/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */ +#define SDRAM_CONFIG1 0x52222600 +#define SDRAM_CONFIG2 0x88b70000 +#define SDRAM_CONTROL 0x50570000 +#define SDRAM_MODE 0x008d0000 + + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xff000000 +#define CFG_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ + + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_SECT_SIZE 0x10000 + + +/* + * Pin multiplexing configuration + */ + +/* PSC1: UART1 + * PSC2: GPIO (default) + * PSC3: GPIO (default) + * USB: 2xUART4/5 + * Ethernet: Ethernet 100Mbit with MD + * Timer: CAN2/GPIO + * PSC6/IRDA: GPIO (default) + */ +#define CFG_GPS_PORT_CONFIG 0x1105a004 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */ + +#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ + + +/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ +#define CFG_RESET_ADDRESS 0xfff00100 + +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index b767449759d..f2f059863d8 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -115,7 +115,7 @@ ":${hostname}:${netdev}:off panic=1\0" \ "flash_nfs=run nfsargs addip;" \ "bootm ${kernel_addr}\0" \ - "flash_nand=nand_args addip addcon;bootm ${kernel_addr}\0" \ + "flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/sc3/uImage\0" \ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 098aa3f0a6e..29f3b408d27 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -391,7 +391,7 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ -#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0AP 0x03017200 #define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) /* Memory Bank 3 (NAND-FLASH) initialization */ @@ -400,7 +400,7 @@ #else #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ /* Memory Bank 3 (NOR-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x03017300 +#define CFG_EBC_PB3AP 0x03017200 #define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) /* Memory Bank 0 (NAND-FLASH) initialization */ |