diff options
Diffstat (limited to 'include/configs')
61 files changed, 747 insertions, 449 deletions
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index d490b33bd4c..baa97410392 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -22,8 +22,6 @@ * (easy to change) */ -#undef DEBUG - #define CONFIG_405 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index c11e9c911d3..8ec70aa639c 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -28,7 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG #define GTREGREAD(x) 0xffffffff /* needed for debug */ /* diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index dae5295dd1b..ea49a5d9395 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -27,9 +27,7 @@ #define CONFIG_EB_MCF_EV123 -#undef DEBUG #undef CFG_HALT_BEFOR_RAM_JUMP -#undef ET_DEBUG /* * High Level Configuration Options (easy to change) diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index bb771887243..c64537fbfa5 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -28,7 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG #define GTREGREAD(x) 0xffffffff /* needed for debug */ /* diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index 6fee4558dee..bb2c96ac94b 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -30,8 +30,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG /* General debug */ - /*----------------------------------------------------------------------- * High Level Configuration Options * (easy to change) diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index ab574d589b6..a3d7bc46355 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -38,8 +38,6 @@ #define CONFIG_M52277 /* define processor type */ #define CONFIG_M52277EVB /* M52277EVB board */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 7f544c839fd..3b4bff306a2 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -37,8 +37,6 @@ #define CONFIG_MCF523x /* define processor family */ #define CONFIG_M5235 /* define processor type */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 798ec0c7a4c..47e1e038b1e 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -31,8 +31,6 @@ #ifndef _M5271EVB_H #define _M5271EVB_H -#undef DEBUG - /* * High Level Configuration Options (easy to change) */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index e95673902a4..1a15c77bdaa 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -37,8 +37,6 @@ #define CONFIG_MCF532x /* define processor family */ #define CONFIG_M5329 /* define processor type */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 6bfffa10854..da4156c747e 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -37,8 +37,6 @@ #define CONFIG_MCF532x /* define processor family */ #define CONFIG_M5373 /* define processor type */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 581c794cd40..5f5576179eb 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -38,8 +38,6 @@ #define CONFIG_M54455 /* define processor type */ #define CONFIG_M54455EVB /* M54455EVB board */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 84c2105d55f..f0d42beb997 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -38,8 +38,6 @@ #define CONFIG_M547x /* define processor type */ #define CONFIG_M5475 /* define processor type */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index e9e5ee91c97..88dd21976c3 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -38,8 +38,6 @@ #define CONFIG_M548x /* define processor type */ #define CONFIG_M5485 /* define processor type */ -#undef DEBUG - #define CONFIG_MCFUART #define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index ad2305c3db8..ff7101f249a 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -25,8 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 295e785f9cb..bf5ef4b59a8 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 6c0e68ab973..702b073381e 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -20,8 +20,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 07f2f30ef87..331f4c93a20 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -29,8 +29,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ @@ -356,6 +354,7 @@ #define CFG_I2C2_OFFSET 0x3100 /* SPI */ +#define CONFIG_MPC8XXX_SPI #define CONFIG_HARD_SPI /* SPI with hardware support */ #undef CONFIG_SOFT_SPI /* SPI bit-banged */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 168ca2aa72a..eff9fbaaee9 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -22,8 +22,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 83a4b1efe13..27b037ad00f 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -17,8 +17,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 2b84e9cd9c5..61de084cc9d 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -21,8 +21,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index bf64f27049c..174215c2cc0 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -240,8 +240,6 @@ #define INTEL_LXT971_PHY 1 #endif -#undef DEBUG - /* Environment */ #ifndef CFG_RAMBOOT #if defined(CONFIG_RAM_AS_FLASH) diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index a53953c29c7..39201474e91 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -42,6 +42,7 @@ #define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */ #define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE @@ -314,6 +315,7 @@ #define CONFIG_NET_MULTI #define CONFIG_CMD_NET #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_CMD_REGINFO #define CONFIG_ULI526X #ifdef CONFIG_ULI526X diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 985182fdec6..a8d0077ca3f 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -49,6 +49,7 @@ #define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ #define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -536,6 +537,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CFG_RAMBOOT) #undef CONFIG_CMD_ENV diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 0defafec260..d799f54f6ac 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -53,8 +53,6 @@ #define ERR_LED(code) #endif -#undef DEBUG - #define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_MVBLUE 1 diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 3657feaf703..3dd84e8c571 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -38,7 +38,6 @@ #undef CFG_DEVICE_NULLDEV /* null device */ #undef CONFIG_SILENT_CONSOLE /* silent console */ #undef CFG_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG /* debug output code */ #undef DEBUG_FLASH /* debug flash code */ #undef FLASH_DEBUG /* debug fash code */ #undef DEBUG_ENV /* debug environment code */ diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 3db539fa90a..7dd6eca9ca0 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -38,7 +38,6 @@ #undef CFG_DEVICE_NULLDEV /* null device */ #undef CONFIG_SILENT_CONSOLE /* silent console */ #undef CFG_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG /* debug output code */ #undef DEBUG_FLASH /* debug flash code */ #undef FLASH_DEBUG /* debug fash code */ #undef DEBUG_ENV /* debug environment code */ diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index b3442de3627..62cf2a449c1 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -38,7 +38,6 @@ #undef CFG_DEVICE_NULLDEV /* null device */ #undef CONFIG_SILENT_CONSOLE /* silent console */ #undef CFG_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG /* debug output code */ #undef DEBUG_FLASH /* debug flash code */ #undef FLASH_DEBUG /* debug fash code */ #undef DEBUG_ENV /* debug environment code */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index d7652fa9ba5..428c0c2b59f 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -37,8 +37,6 @@ #define CONFIG_RATTLER /* Analogue&Micro Rattler board */ -#undef DEBUG - /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 8ef3f090855..024ecfaf327 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -181,7 +181,7 @@ extern int tqm834x_num_flash_banks; #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc */ /* * Serial Port @@ -302,7 +302,7 @@ extern int tqm834x_num_flash_banks; #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ @@ -335,6 +335,7 @@ extern int tqm834x_num_flash_banks; #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -491,24 +492,7 @@ extern int tqm834x_num_flash_banks; * Environment Configuration */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR D2:DA:5E:44:BC:29 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 1E:F3:40:21:92:53 -#endif - -#define CONFIG_IPADDR 192.168.205.1 - -#define CONFIG_HOSTNAME tqm8349 -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx -#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -523,7 +507,7 @@ extern int tqm834x_num_flash_banks; #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "hostname=tqm83xx\0" \ + "hostname=tqm834x\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -535,13 +519,13 @@ extern int tqm834x_num_flash_banks; "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "net_nfs=tftp 400000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/tqm83xx/uImage\0" \ + "bootfile=/tftpboot/tqm834x/uImage\0" \ "kernel_addr=80060000\0" \ "ramdisk_addr=80160000\0" \ - "load=tftp 100000 /tftpboot/tqm83xx/u-boot.bin\0" \ + "load=tftp 100000 /tftpboot/tqm834x/u-boot.bin\0" \ "update=protect off 80000000 8003ffff; " \ "era 80000000 8003ffff; cp.b 100000 80000000 40000\0" \ "upd=run load;run update\0" \ @@ -557,7 +541,7 @@ extern int tqm834x_num_flash_banks; #define MTDIDS_DEFAULT "nor0=TQM834x-0" /* default mtd partition table */ -#define MTDPARTS_DEFAULT "mtdparts=TQM834x-0:256k(u-boot),128k(env),"\ +#define MTDPARTS_DEFAULT "mtdparts=TQM834x-0:256k(u-boot),256k(env),"\ "1m(kernel),2m(initrd),"\ "-(user);"\ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 8d90ea18e39..09c31403609 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -27,9 +27,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /* * Memory map for the ADS5121 board: * diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 226ad54723e..d10f092f985 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -29,8 +29,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options * (easy to change) diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h new file mode 100644 index 00000000000..f0dfd71aef4 --- /dev/null +++ b/include/configs/at91cap9adk.h @@ -0,0 +1,212 @@ +/* + * (C) Copyright 2007 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91CAP9ADK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ +#define AT91C_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */ +#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_BAUDRATE 115200 + +/* + * Hardware drivers + */ + +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock1 rw rootfstype=jffs2" + +/* #define CONFIG_ENV_OVERWRITE 1 */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x70000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 1 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CONFIG_NEW_PARTITION 1 + +/* NOR flash */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 + +#define AT91C_FLASH_NWE_SETUP (4 << 0) +#define AT91C_FLASH_NCS_WR_SETUP (2 << 8) +#define AT91C_FLASH_NRD_SETUP (4 << 16) +#define AT91C_FLASH_NCS_RD_SETUP (2 << 24) + +#define AT91C_FLASH_NWE_PULSE (8 << 0) +#define AT91C_FLASH_NCS_WR_PULSE (10 << 8) +#define AT91C_FLASH_NRD_PULSE (8 << 16) +#define AT91C_FLASH_NCS_RD_PULSE (10 << 24) + +#define AT91C_FLASH_NWE_CYCLE (16 << 0) +#define AT91C_FLASH_NRD_CYCLE (16 << 16) + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 + +#define AT91C_SM_NWE_SETUP (2 << 0) +#define AT91C_SM_NCS_WR_SETUP (1 << 8) +#define AT91C_SM_NRD_SETUP (2 << 16) +#define AT91C_SM_NCS_RD_SETUP (1 << 24) + +#define AT91C_SM_NWE_PULSE (4 << 0) +#define AT91C_SM_NCS_WR_PULSE (6 << 8) +#define AT91C_SM_NRD_PULSE (4 << 16) +#define AT91C_SM_NCS_RD_PULSE (6 << 24) + +#define AT91C_SM_NWE_CYCLE (8 << 0) +#define AT91C_SM_NRD_CYCLE (8 << 16) + +#define AT91C_SM_TDF (1 << 16) + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91C_BASE_UHP */ +#define CFG_USB_OHCI_SLOT_NAME "at91cap9" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 + + +#define CFG_LOAD_ADDR 0x72000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x73000000 + +#define CFG_USE_DATAFLASH 1 +#undef CFG_USE_NORFLASH + +#ifdef CFG_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x72000000 0x200040; bootm" + +#else + +/* bootstrap + u-boot + env + linux in norflash */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_MONITOR_BASE (PHYS_FLASH_1 + 0x8000) +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4000 +#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm" + +#endif + +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 414e130bb5b..5aad043d89e 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -170,13 +170,9 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START \ - ({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; }) -#define CFG_MEMTEST_END \ - ({ \ - DECLARE_GLOBAL_DATA_PTR; \ - gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \ - }) +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000) + #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } #endif /* __CONFIG_H */ diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index b33e26fe011..95aeab6d4ee 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -184,8 +184,8 @@ #define CFG_MALLOC_LEN (256*1024) #define CFG_DMA_ALLOC_LEN (16384) -/* Allow 2MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 1bad171cbf3..b81fc212701 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -167,7 +167,7 @@ #define CFG_MALLOC_LEN (256*1024) -/* Allow 4MB for the kernel run-time image */ +/* Allow 2MB for the kernel run-time image */ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) #define CFG_BOOTPARAMS_LEN (16 * 1024) diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 85ad70a0d50..cebe849f668 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -31,8 +31,6 @@ #define CONFIG_EP8248 /* Embedded Planet EP8248 board */ -#undef DEBUG - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index 4febd322a4f..8e5d6e57c78 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -31,8 +31,6 @@ #define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */ /* 256MB SDRAM / 64MB FLASH */ -#undef DEBUG - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index e11ce4c715e..3b1b4ab9506 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -29,8 +29,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000. * We don't actually init RAM in this case since we're using U-Boot as diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index ff5724082d0..7c2c224060d 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -51,7 +51,6 @@ #define __CONFIG_H /* Enable debug prints */ -#undef DEBUG /* General debug */ #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ /* What is the oscillator's (UX2) frequency in Hz? */ diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index cb51406cb71..9242d2c4d73 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -33,7 +33,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_HCU4 1 /* Board is HCU4 */ #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */ #define CONFIG_405GP 1 #define CONFIG_4xx 1 @@ -176,7 +175,7 @@ #define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=0x01000000\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -190,14 +189,14 @@ "bootm\0" \ "rootpath=/home/diagnose/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/hcu4/uImage\0" \ - "load=tftp 100000 hcu4/u-boot.bin\0" \ - "update=protect off FFFB0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \ + "load=tftp 100000 hcu4/u-boot.bin\0" \ + "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;" \ "cp.b 100000 FFFB0000 50000\0" \ "upd=run load;run update\0" \ - "vx=tftp ${loadaddr} hcu4_vx_rom;" \ - "vx=tftp ${loadaddr} hcu4/hcu4_vx_rom;" \ - "setenv bootargs emac(0,0)c:hcu4/hcu4_vx_rom e=${ipaddr} " \ - "bootvx ${loadaddr}\0" \ + "vx_rom=hcu4/hcu4_vx_rom\0" \ + "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0" \ + "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \ "" #define CONFIG_BOOTCOMMAND "run vx" @@ -207,7 +206,7 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 1 /* PHY address */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ @@ -334,15 +333,6 @@ /* Configuration Port location */ #define CONFIG_PORT_ADDR 0xF0000500 - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #define CFG_HUSH_PARSER /* use "hush" command parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d66c47a39da..8c26613d0c0 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -123,7 +123,7 @@ /* Put the environment in Flash */ #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */ +#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) @@ -148,9 +148,9 @@ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the * the second internal I2C controller of the PPC440EPx *----------------------------------------------------------------------*/ -#define CFG_SPD_BUS_NUM 1 +#define CFG_SPD_BUS_NUM 1 -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -182,7 +182,7 @@ #define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=0x01000000\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -197,14 +197,13 @@ "bootfile=hcu5/uImage\0" \ "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \ "load=tftp 100000 hcu5/u-boot.bin\0" \ - "update=protect off FFFb0000 FFFFFFFF;era FFFb0000 FFFFFFFF;" \ - "cp.b 100000 FFFb0000 50000\0" \ + "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;" \ + "cp.b 100000 FFFB0000 50000\0" \ "upd=run load;run update\0" \ - "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom; run vxboot\0" \ - "vxusb=usb start; fatload usb 0 ${loadaddr} vxWorks.st; run vxboot\0" \ - "vxargs=emac(0,0)c:hcu5/hcu5_vx_rom e=${ipaddr} h=${serverip}" \ - " u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \ - "vxboot=setenv bootargs $(vxargs); bootvx ${loadaddr}\0" \ + "vx_rom=hcu5/hcu5_vx_rom\0" \ + "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0" \ + "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \ "usbargs=setenv bootargs root=/dev/sda1 ro\0" \ "linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;" \ "run usbargs addip addtty; bootm\0" \ @@ -225,16 +224,16 @@ #define CONFIG_M88E1111_PHY 1 #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ +#define CONFIG_PHY_ADDR 1 /* PHY address, like on HCU4 */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & desc. */ #define CONFIG_NET_MULTI 1 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY1_ADDR 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 2 /* USB */ #define CONFIG_USB_OHCI @@ -311,7 +310,7 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ @@ -350,11 +349,11 @@ * Flash *----------------------------------------------------------------------*/ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup @@ -393,14 +392,6 @@ #define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 ) #define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 ) -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #define CFG_HUSH_PARSER /* use "hush" command parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " diff --git a/include/configs/korat.h b/include/configs/korat.h index 5182972829b..7f2b09a0bbd 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -25,73 +25,73 @@ * MA 02111-1307 USA */ -/************************************************************************ +/* * korat.h - configuration for Korat board - ***********************************************************************/ + */ #ifndef __CONFIG_H #define __CONFIG_H -/*----------------------------------------------------------------------- +/* * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ + */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -/*----------------------------------------------------------------------- +/* * Manufacturer's information serial EEPROM parameters - *----------------------------------------------------------------------*/ -#define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ + */ +#define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ #define MAN_SERIAL_NO_FIELD 2 #define MAN_SERIAL_NO_LENGTH 13 #define MAN_MAC_ADDR_FIELD 3 #define MAN_MAC_ADDR_LENGTH 17 -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ -#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ +/* + * Base addresses -- Note these are effective addresses where the actual + * resources get mapped (not physical addresses). + */ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ #define CFG_BOOT_BASE_ADDR 0xf0000000 -#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_OCM_BASE 0xe0010000 /* ocm */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE -#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ -#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 #define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 #define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 /* Don't change either of these */ -#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ #define CFG_USB2D0_BASE 0xe0000100 #define CFG_USB_DEVICE 0xe0000000 #define CFG_USB_HOST 0xe0000400 #define CFG_CPLD_BASE 0xc0000000 -/*----------------------------------------------------------------------- +/* * Initial RAM & stack pointer - *----------------------------------------------------------------------*/ + */ /* 440EPx has 16KB of internal SRAM, so no need for D-Cache */ #undef CFG_INIT_RAM_DCACHE -#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR -/*----------------------------------------------------------------------- +/* * Serial Port - *----------------------------------------------------------------------*/ -#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ + */ +#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI 1 /* define this if you want console on UART1 */ @@ -100,57 +100,57 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -/*----------------------------------------------------------------------- +/* * Environment - *----------------------------------------------------------------------*/ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */ + */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */ -/*----------------------------------------------------------------------- +/* * FLASH related - *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) -/*----------------------------------------------------------------------- +/* * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CFG_MBYTES_SDRAM (512) /* 512 MiB TODO: remove */ -#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ -#define CONFIG_DDR_ECC /* Use ECC when available */ + */ +#define CFG_MBYTES_SDRAM (512) /* 512 MiB TODO: remove */ +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ +#define CONFIG_DDR_ECC /* Use ECC when available */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB #define CFG_DRAM_TEST -/*----------------------------------------------------------------------- +/* * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_MULTI_EEPROMS @@ -164,8 +164,8 @@ #define CFG_I2C_RTC_ADDR 0x68 /* I2C SYSMON (LM73) */ -#define CONFIG_DTT_LM73 1 /* National Semi's LM73 */ -#define CONFIG_DTT_SENSORS {2} /* Sensor addresses */ +#define CONFIG_DTT_LM73 1 /* National Semi's LM73 */ +#define CONFIG_DTT_SENSORS {2} /* Sensor addresses */ #define CFG_DTT_MAX_TEMP 70 #define CFG_DTT_MIN_TEMP -30 @@ -206,24 +206,24 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ #define CONFIG_PHY_DYNAMIC_ANEG 1 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */ + /* buffers & descriptors */ #define CONFIG_NET_MULTI 1 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ #define CONFIG_PHY1_ADDR 3 /* USB */ @@ -273,80 +273,81 @@ #define CONFIG_CMD_USB /* POST support */ -#define CONFIG_POST (CFG_POST_CACHE | \ +#define CONFIG_POST (CFG_POST_CACHE | \ CFG_POST_CPU | \ - CFG_POST_ECC | \ + CFG_POST_ECC | \ CFG_POST_ETHER | \ CFG_POST_FPU | \ CFG_POST_I2C | \ CFG_POST_MEMORY | \ - CFG_POST_RTC | \ - CFG_POST_SPR | \ + CFG_POST_RTC | \ + CFG_POST_SPR | \ CFG_POST_UART) #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) #define CONFIG_LOGBUFFER -#define CFG_POST_CACHE_ADDR 0xC8000000 /* free virtual address */ +#define CFG_POST_CACHE_ADDR 0xC8000000 /* free virtual address */ #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ #define CONFIG_SUPPORT_VFAT -/*----------------------------------------------------------------------- +/* * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) + /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -/*----------------------------------------------------------------------- +/* * PCI stuff - *----------------------------------------------------------------------*/ + */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ - +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */ + /* CFG_PCI_MEMBASE */ /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT -#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ /* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. + * For booting Linux, the board info and command line data have to be in the + * first 8 MB of memory, since this is the maximum mapped by the Linux kernel + * during initialization. */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- +/* * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ + */ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x04017300 @@ -360,7 +361,7 @@ #define CFG_EBC_PB2AP 0x04017300 #define CFG_EBC_PB2CR (CFG_CPLD_BASE | 0x00038000) -/*----------------------------------------------------------------------- +/* * GPIO Setup * * Korat GPIO usage: @@ -423,7 +424,7 @@ * . . . . . * . . . . . * GPIO63 xxxx x x (reserved for trace port) -*----------------------------------------------------------------------*/ + */ #define CFG_GPIO_ATMEGA_SS_ 13 #define CFG_GPIO_PHY0_FIBER_SEL 27 @@ -435,7 +436,7 @@ #define CFG_GPIO_PHY0_EN 45 #define CFG_GPIO_PHY1_EN 46 -/*----------------------------------------------------------------------- +/* * PPC440 GPIO Configuration */ #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ @@ -516,11 +517,12 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + #endif /* __CONFIG_H */ diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h new file mode 100644 index 00000000000..095fdaf5c8b --- /dev/null +++ b/include/configs/m501sk.h @@ -0,0 +1,197 @@ +/* + * Based on Modifications by Alan Lu / Artila and + * Rick Bronson <rick@efn.org> + * + * Configuration settings for the Artila M-501 starter kit, + * with V02 processor card. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +/* from 18.432 MHz crystal (18432000 / 4 * 39) */ +#define AT91C_MAIN_CLOCK 179712000 +/* Perip clock (AT91C_MASTER_CLOCK / 3) */ +#define AT91C_MASTER_CLOCK 59904000 +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#undef CONFIG_AUTOBOOT_PROMPT +#define CONFIG_MENUPROMPT "." + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ + +#define CONFIG_BAUDRATE 115200 + +/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ +#define CFG_AT91C_BRGR_DIVISOR 33 + +/* + * Hardware drivers + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_FLASH_USE_BUFFER_WRITE +#define CFG_FLASH_PROTECTION /*for Intel P30 Flash*/ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 0 +#define CFG_CONSOLE_INFO_QUIET +#undef CFG_ENV_IS_IN_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_AT24C16 +#define CFG_I2C_RTC_ADDR 0x32 +#undef CONFIG_RTC_DS1338 +#define CONFIG_RTC_RS5C372A +#undef CONFIG_POST +#define CONFIG_M501SK +#define CONFIG_CMC_PU2 + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_DBGU +#undef CONFIG_USART0 +#undef CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \ + "initrd=0x20800000,8192000 ramdisk_size=15360 " \ + "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \ + "128k(loader)ro,128k(reserved)ro,1408k(linux)" \ + "ro,2560k(ramdisk)ro,-(userdisk)" +#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000" +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_IPADDR 192.168.1.100 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.254 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_BOOTFILE uImage +#define CONFIG_ETHADDR 00:13:48:aa:bb:cc +#define CONFIG_ENV_OVERWRITE 1 +#define BOARD_LATE_INIT + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "unlock=yes\0" + +#define CFG_CMD_JFFS2 +#undef CONFIG_CMD_EEPROM +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_POST +#define CONFIG_CMD_MISC +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_IMI +#define CONFIG_CMD_NFS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV + +#define CFG_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE +#define CFG_PROMPT_HUSH_PS2 ">>" + +#define CFG_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ + +#define CFG_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ +/* CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ +#define CFG_MEMTEST_END 0x00100000 + +#define CONFIG_DRIVER_ETHER +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_AT91C_USE_RMII + +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#ifdef CFG_ENV_IS_IN_DATAFLASH +#define CFG_ENV_OFFSET 0x20000 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 +#else +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000) +#define CFG_ENV_SIZE 2048 +#endif + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_OFFSET 1024 +#define CFG_ENV_SIZE 1024 +#endif + +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +/* use for protect flash sectors */ +#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ +#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) +#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ + +#define CFG_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 512 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) + +#define CFG_HZ 1000 +#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 3de24669fdf..f4a1cc0ecae 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -35,8 +35,6 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ -#undef DEBUG - /* * Select serial console configuration * diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index bd3107ab23c..c7216c97a4c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -33,8 +33,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* Board Configuration Definitions */ /* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */ diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 7035002c4f3..9c94c4e793f 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -25,7 +25,6 @@ #ifndef __MS7720SE_H #define __MS7720SE_H -#undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH3 1 #define CONFIG_CPU_SH7720 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index ae0d0185154..85380373dab 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -25,7 +25,6 @@ #ifndef __MS7722SE_H #define __MS7722SE_H -#undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH4 1 #define CONFIG_CPU_SH7722 1 diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 36681568f8a..a25364dd388 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -25,7 +25,6 @@ #ifndef __MS7750SE_H #define __MS7750SE_H -#undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH4 1 #define CONFIG_CPU_SH7750 1 diff --git a/include/configs/munices.h b/include/configs/munices.h index 2372b5763b8..38b27bb3a77 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -48,7 +48,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 33159d31563..a48893d1eb2 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -48,14 +48,15 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#define CFG_DEVICE_NULLDEV 1 /* enable null device */ #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CFG_CONSOLE_INFO_QUIET /* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ /* @@ -63,30 +64,21 @@ */ #define CFG_FLASH_BASE PHYS_FLASH_1 #define CFG_MAX_FLASH_BANKS 1 -#if (PHYS_SDRAM_1_SIZE == SZ_32M) -/*#if 1*/ -#define CFG_FLASH_CFI /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CFG_FLASH_EMPTY_INFO -#define CFG_MAX_FLASH_SECT 128 -#else -#define PHYS_FLASH_1_SIZE SZ_1M +#define PHYS_FLASH_1_SIZE (1 * 1024 * 1024) #define CFG_MAX_FLASH_SECT 19 #define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */ #define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) -#endif #define CFG_MONITOR_BASE PHYS_FLASH_1 -#define CFG_MONITOR_LEN SZ_256K +#define CFG_MONITOR_LEN (256 * 1024) /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH -#define ENV_IS_SOLITARY #define CFG_ENV_ADDR 0x4000 -#define CFG_ENV_SIZE SZ_8K -#define CFG_ENV_SECT_SIZE SZ_8K +#define CFG_ENV_SIZE (8 * 1024) +#define CFG_ENV_SECT_SIZE (8 * 1024) #define CFG_ENV_ADDR_REDUND 0x6000 #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE #define CONFIG_ENV_OVERWRITE @@ -95,14 +87,12 @@ * Size of malloc() pool */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/ -#define CFG_MALLOC_LEN SZ_4M +#define CFG_MALLOC_LEN (4 * 1024 * 1024) /* * The stack size is set up in start.S using the settings below */ -/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */ -#define CONFIG_STACKSIZE SZ_1M /* regular stack */ +#define CONFIG_STACKSIZE (1 * 1024 * 1024) /* regular stack */ /* * Hardware drivers @@ -132,13 +122,16 @@ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE 0x04000000 + (2 << 23) +#define NAND_ALLOW_ERASE_ALL 1 /* - * JFFS2 partitions (mtdparts command line support) + * partitions (mtdparts command line support) */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" -#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" +#define MTDPARTS_DEFAULT "mtdparts=" \ + "omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \ + "omapnand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)" /* @@ -176,36 +169,34 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CFG_AUTOLOAD "n" /* No autoload */ -#define CONFIG_BOOTCOMMAND "run nboot" +#define CONFIG_BOOTCOMMAND "run fboot" #define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "setup=setenv bootargs console=ttyS0,$baudrate " \ - "$mtdparts\0" \ - "ospart=0\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\ - "setenv swapos; saveenv; " \ - "else " \ - "chpart nand0,$ospart; " \ - "fi\0" \ - "nfsargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart;setenv bootargs $bootargs " \ - "root=/dev/mtdblock$partition ro " \ - "rootfstype=jffs2\0" \ - "initrdargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "iboot=bootp;run initrdargs;tftp;bootm\0" \ - "fboot=run flashargs;fsload /boot/uImage;bootm\0" \ - "nboot=bootp;run nfsargs;tftp;bootm\0" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autostart=yes\0" \ + "ospart=0\0" \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "$mtdparts\0" \ + "setpart=" \ + "if test -n $swapos; then " \ + "setenv swapos; saveenv; " \ + "else " \ + "if test $ospart -eq 0; then setenv ospart 1;" \ + "else setenv ospart 0; fi; " \ + "fi\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ + "flashargs=run setpart;setenv bootargs $bootargs " \ + "root=mtd:rootfs$ospart ro " \ + "rootfstype=jffs2\0" \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "fboot=run flashargs;nboot kernel$ospart\0" \ + "nboot=bootp;run nfsargs;tftp\0" #if 0 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n" -#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ -#define CONFIG_BOOT_RETRY_TIME 30 +#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d secs...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ #endif /* @@ -223,7 +214,8 @@ #define CONFIG_AUTO_COMPLETE #define CFG_MEMTEST_START PHYS_SDRAM_1 -#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ + (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index d66f4bd449b..07fc23e5e73 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -66,7 +66,7 @@ *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CFG_INIT_RAM_END (8 << 10) +#define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index fe7de7bed0f..1d2d38b36bb 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -30,7 +30,6 @@ * do_bdinfo - Required to build with debug */ -#undef DEBUG #ifdef DEBUG #define GTREGREAD(x) 0xFFFFFFFF #define do_bdinfo(a,b,c,d) diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 33c828337be..e1640195a5b 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -32,8 +32,6 @@ #define CONFIG_QEMU_MIPS 1 #define CONFIG_MISC_INIT_R -#undef DEBUG - /*IP address is default used by Qemu*/ #define CONFIG_IPADDR 10.0.2.15 /* Our IP address */ #define CONFIG_SERVERIP 10.0.2.2 /* Server IP address*/ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index c474acd70ec..ec7d34aa9e6 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -35,7 +35,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG /* General debug */ #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ #undef CONFIG_LOGBUFFER /* External logbuffer support */ diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index b1d41a6d42b..60633987f6a 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -36,7 +36,6 @@ #define __CONFIG_H /* Enable debug prints */ -#undef DEBUG /* General debug */ #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ /***************************************************************************** diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 4cc4ff1723f..2498b3e6503 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -31,8 +31,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 54eac38b86f..1991a8cc873 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -53,6 +53,7 @@ #define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -479,6 +480,7 @@ #include <config_cmd_default.h> #define CONFIG_CMD_PING #define CONFIG_CMD_I2C + #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 056c2889bfb..cd0ae6d1a82 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -22,23 +22,23 @@ * MA 02111-1307 USA */ -/************************************************************************ +/* * sequoia.h - configuration for Sequoia & Rainier boards - ***********************************************************************/ + */ #ifndef __CONFIG_H #define __CONFIG_H -/*----------------------------------------------------------------------- +/* * High Level Configuration Options - *----------------------------------------------------------------------*/ + */ /* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ #ifndef CONFIG_RAINIER -#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ #else -#define CONFIG_440GRX 1 /* Specific PPC440GRx */ +#define CONFIG_440GRX 1 /* Specific PPC440GRx */ #endif -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ /* Detect Sequoia PLL input clock automatically via CPLD bit */ #define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ 33333333 : 33000000) @@ -48,28 +48,28 @@ * 44x dcache supported is working now on sequoia, but we don't enable * it yet since it needs further testing */ -#define CONFIG_4xx_DCACHE /* enable dcache */ +#define CONFIG_4xx_DCACHE /* enable dcache */ #endif -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ -#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ +/* + * Base addresses -- Note these are effective addresses where the actual + * resources get mapped (not physical addresses). + */ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ #define CFG_TLB_FOR_BOOT_FLASH 0x0003 #define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ -#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ +#define CFG_OCM_BASE 0xe0010000 /* ocm */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE -#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 #define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 @@ -83,62 +83,62 @@ #define CFG_USB_HOST 0xe0000400 #define CFG_BCSR_BASE 0xc0000000 -/*----------------------------------------------------------------------- +/* * Initial RAM & stack pointer - *----------------------------------------------------------------------*/ + */ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR -/*----------------------------------------------------------------------- +/* * Serial Port - *----------------------------------------------------------------------*/ + */ #define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_SERIAL_MULTI 1 /* define this if you want console on UART1 */ #undef CONFIG_UART1_CONSOLE #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -/*----------------------------------------------------------------------- +/* * Environment - *----------------------------------------------------------------------*/ + */ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */ #else -#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif -/*----------------------------------------------------------------------- +/* * FLASH related - *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) @@ -163,27 +163,28 @@ * set up. While still running from cache, I experienced problems accessing * the NAND controller. sr - 2006-08-25 */ -#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ -#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from */ + /* this addr */ #define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) /* * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) */ -#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ #define CFG_NAND_ECCSIZE 256 #define CFG_NAND_ECCBYTES 3 @@ -202,20 +203,20 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) #endif -/*----------------------------------------------------------------------- +/* * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CFG_MBYTES_SDRAM (256) /* 256MB */ + */ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif -/*----------------------------------------------------------------------- +/* * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_MULTI_EEPROMS @@ -226,9 +227,9 @@ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ #define CFG_DTT_MAX_TEMP 70 #define CFG_DTT_LOW_TEMP -30 #define CFG_DTT_HYSTERESIS 3 @@ -290,12 +291,12 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */ + /* buffers & descriptors */ #define CONFIG_NET_MULTI 1 #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ #define CONFIG_PHY1_ADDR 1 @@ -322,7 +323,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION - /* * BOOTP options */ @@ -332,7 +332,6 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_SUBNETMASK - /* * Command line configuration. */ @@ -367,26 +366,26 @@ #endif /* POST support */ -#define CONFIG_POST (CFG_POST_MEMORY | \ +#define CONFIG_POST (CFG_POST_CACHE | \ CFG_POST_CPU | \ - CFG_POST_UART | \ - CFG_POST_I2C | \ - CFG_POST_CACHE | \ - CFG_POST_FPU_ON | \ CFG_POST_ETHER | \ - CFG_POST_SPR) + CFG_POST_FPU_ON | \ + CFG_POST_I2C | \ + CFG_POST_MEMORY | \ + CFG_POST_SPR | \ + CFG_POST_UART) #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) #define CONFIG_LOGBUFFER -#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ +#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ -#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ #define CONFIG_SUPPORT_VFAT -/*----------------------------------------------------------------------- +/* * Miscellaneous configurable options - *----------------------------------------------------------------------*/ + */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) @@ -394,7 +393,8 @@ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) + /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ @@ -402,26 +402,26 @@ #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -/*----------------------------------------------------------------------- +/* * PCI stuff - *----------------------------------------------------------------------*/ + */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ - +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */ + /* CFG_PCI_MEMBASE */ /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -430,54 +430,54 @@ #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ /* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. + * For booting Linux, the board info and command line data have to be in the + * first 8 MB of memory, since this is the maximum mapped by the Linux kernel + * during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- +/* * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ + */ /* * On Sequoia CS0 and CS3 are switched when configuring for NAND booting */ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ -/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03017200 #define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000) -/* Memory Bank 3 (NAND-FLASH) initialization */ +/* Memory Bank 3 (NAND-FLASH) initialization */ #define CFG_EBC_PB3AP 0x018003c0 #define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) #else -#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 3 (NOR-FLASH) initialization */ +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 3 (NOR-FLASH) initialization */ #define CFG_EBC_PB3AP 0x03017200 #define CFG_EBC_PB3CR (CFG_FLASH_BASE | 0xda000) -/* Memory Bank 0 (NAND-FLASH) initialization */ +/* Memory Bank 0 (NAND-FLASH) initialization */ #define CFG_EBC_PB0AP 0x018003c0 #define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) #endif -/* Memory Bank 2 (CPLD) initialization */ +/* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x24814580 #define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x38000) #define CFG_BCSR5_PCI66EN 0x80 -/*----------------------------------------------------------------------- +/* * NAND FLASH - *----------------------------------------------------------------------*/ + */ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) -#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -/*----------------------------------------------------------------------- +/* * PPC440 GPIO Configuration */ /* test-only: take GPIO init from pcs440ep ???? in config file */ @@ -559,16 +559,16 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 84998d4392a..7a15d97cb0c 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -140,7 +140,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ /* #define CONFIG_INITRD_TAG 1 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index d167e0174e8..4d1bdd7b143 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -33,7 +33,7 @@ #define CONFIG_XSENGINE 1 #define CONFIG_MMC 1 #define CONFIG_DOS_PARTITION 1 -#define OARD_LATE_INIT 1 +#define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ @@ -86,8 +86,8 @@ #define CFG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */ /* Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) @@ -96,7 +96,7 @@ /* Hardware drivers */ #define CONFIG_DRIVER_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_SMC_USE_32_BIT 1 /* select serial console configuration */ #define CONFIG_FFUART 1 @@ -138,15 +138,15 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0xA0400000 /* memtest works on */ #define CFG_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ #define CFG_MMC_BASE 0xF0000000 -#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */ +#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */ /* Stack sizes - The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ @@ -168,7 +168,7 @@ /* GP direction register */ #define CFG_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ #define CFG_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ +#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ /* GP rising edge detect register */ #define CFG_GRER0_VAL 0x00000000 @@ -185,7 +185,7 @@ #define CFG_GAFR0_U_VAL 0x00000010 /* RDY */ #define CFG_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ #define CFG_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ +#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ #define CFG_GAFR2_U_VAL 0x00000000 #define CFG_PSSR_VAL 0x00000020 /* Power manager sleep status */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index a8eeff989c3..4c86bc53cf8 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -75,7 +75,7 @@ *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CFG_INIT_RAM_END (8 << 10) +#define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |