diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/uniphier.h | 52 |
1 files changed, 44 insertions, 8 deletions
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index c6fc90fe917..8ecfc6f7cf6 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -71,8 +71,7 @@ /* serial console configuration */ #define CONFIG_BAUDRATE 115200 - -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) #define CONFIG_USE_ARCH_MEMSET #define CONFIG_USE_ARCH_MEMCPY #endif @@ -99,8 +98,18 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 1 +#ifdef CONFIG_ARM64 +#define CONFIG_ARMV8_MULTIENTRY +#define CPU_RELEASE_ADDR 0x80000100 +#define COUNTER_FREQUENCY 50000000 +#define CONFIG_GICV3 +#define GICD_BASE 0x5fe00000 +#define GICR_BASE 0x5fe80000 +#else /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 +#endif + #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 @@ -176,23 +185,37 @@ "bootm $fit_addr_r\0" \ "__nfsboot=run tftpboot\0" #else +#ifdef CONFIG_ARM64 +#define CONFIG_CMD_BOOTI +#define CONFIG_BOOTFILE "Image" +#define LINUXBOOT_CMD "booti" +#define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" +#define KERNEL_SIZE "kernel_size=0x00c00000\0" +#define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" +#else #define CONFIG_CMD_BOOTZ #define CONFIG_BOOTFILE "zImage" +#define LINUXBOOT_CMD "bootz" +#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" +#define KERNEL_SIZE "kernel_size=0x00800000\0" +#define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" +#endif #define LINUXBOOT_ENV_SETTINGS \ "fdt_addr=0x00100000\0" \ "fdt_addr_r=0x84100000\0" \ "fdt_size=0x00008000\0" \ "kernel_addr=0x00200000\0" \ - "kernel_addr_r=0x80208000\0" \ - "kernel_size=0x00800000\0" \ - "ramdisk_addr=0x00a00000\0" \ + KERNEL_ADDR_R \ + KERNEL_SIZE \ + RAMDISK_ADDR \ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ - "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ + LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ - "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \ + "setexpr kernel_size $kernel_size / 4 &&" \ + "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ "run boot_common\0" \ @@ -237,15 +260,24 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_NR_DRAM_BANKS 2 +/* for LD20; the last 64 byte is used for dynamic DDR PHY training */ +#define CONFIG_SYS_MEM_TOP_HIDE 64 -#if defined(CONFIG_ARCH_UNIPHIER_SLD3) || defined(CONFIG_ARCH_UNIPHIER_LD4) || \ +#if defined(CONFIG_ARM64) +#define CONFIG_SPL_TEXT_BASE 0x30000000 +#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ + defined(CONFIG_ARCH_UNIPHIER_LD4) || \ defined(CONFIG_ARCH_UNIPHIER_SLD8) #define CONFIG_SPL_TEXT_BASE 0x00040000 #else #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif +#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#define CONFIG_SPL_STACK (0x3001c000) +#else #define CONFIG_SPL_STACK (0x00100000) +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) #define CONFIG_PANIC_HANG @@ -253,8 +285,10 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NOR_SUPPORT +#ifndef CONFIG_ARM64 #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_MMC_SUPPORT +#endif #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -270,5 +304,7 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 #define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x30016000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |