diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/B2.h | 209 | ||||
-rw-r--r-- | include/configs/at91rm9200dk.h | 1 |
2 files changed, 210 insertions, 0 deletions
diff --git a/include/configs/B2.h b/include/configs/B2.h new file mode 100644 index 00000000000..2fc97b27c2e --- /dev/null +++ b/include/configs/B2.h @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2004 + * DAVE Srl + * + * http://www.dave-tech.it + * http://www.wawnet.biz + * mailto:info@wawnet.biz + * + * Configuation settings for the B2 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_B2 1 /* on an B2 Board */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/ + + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + + +/* + * Size of malloc() pool + */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024 ) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */ +#define CONFIG_SMC_USE_32_BIT +#undef CONFIG_SHOW_ACTIVITY +#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_ETHADDR 00:50:c2:1e:af:fb +#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \ + ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb" +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.70 +#define CONFIG_SERVERIP 192.168.0.23 +#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot" +#define CONFIG_BOOTCOMMAND "bootm 20000 f0000" + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0C400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x0c700000 /* default load address */ + +#define CFG_HZ 1000 /* 1 kHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +/*----------------------------------------------------------------------- + * Environment Variable setup + */ +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */ + +/*----------------------------------------------------------------------- + * I2C EEPROM (STM24C02W6) for environment + */ +#define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0xFE + +#define CFG_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07*/ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ + /* 16 byte page write mode using*/ + /* last 4 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +/* Flash banks JFFS2 should use */ +/* +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_FIRST_SECTOR 2 +#define CFG_JFFS2_NUM_BANKS 1 +*/ + +/* + Linux TAGs (see lib_arm/armlinux.c) +*/ +#define CONFIG_CMDLINE_TAG +#undef CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index d97182678ba..90cf8a2b4ae 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -112,6 +112,7 @@ #define CONFIG_DRIVER_ETHER #define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_AT91C_USE_RMII #define CONFIG_HAS_DATAFLASH 1 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) |