summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ADNPESC1.h689
-rw-r--r--include/configs/ADNPESC1_base_32.h431
-rw-r--r--include/configs/DK1C20.h555
-rw-r--r--include/configs/DK1C20_safe_32.h34
-rw-r--r--include/configs/DK1C20_standard_32.h279
-rw-r--r--include/configs/DK1S10.h561
-rw-r--r--include/configs/DK1S10_mtx_ldk_20.h187
-rw-r--r--include/configs/DK1S10_safe_32.h34
-rw-r--r--include/configs/DK1S10_standard_32.h274
9 files changed, 0 insertions, 3044 deletions
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
deleted file mode 100644
index 2d4fc779150..00000000000
--- a/include/configs/ADNPESC1.h
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_BASE_32)
-#include <configs/ADNPESC1_base_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately -- this is very important if you plan to move your
- * memory to another place as configured at this time !!!).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-
-/* Mem addr of environment */
-#if defined(CONFIG_NIOS_BASE_32)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * NIOS APPLICATION CODE BASE AREA
- *----------------------------------------------------------------------*/
-#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
-#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff"
-#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000"
-#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff"
-#else
-#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
-#endif
-#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios"
-
-/*------------------------------------------------------------------------
- * BOOT ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
-#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; "
-#else
-#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
-#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND \
- "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
- "then " \
- "wd off; " \
- CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \
- "go $appl_entry_addr; " \
- "else " \
- CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \
- "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
- "echo *** invalid application at $appl_entry_addr; " \
- "echo *** stop bootup...; " \
- "fi"
-
-/*------------------------------------------------------------------------
- * EXTRA ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
-#else
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "update_allowed=0\0" \
- "update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
- "appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \
- "appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \
- "appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \
- "appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \
- "appl_name=ADNPESC1/base32/linux.bin\0" \
- "appl_update=" \
- "if itest.b $update_allowed != 0; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $appl_name; " \
- "protect off $appl_entry_addr $appl_end_addr; " \
- "era $appl_entry_addr $appl_end_addr; " \
- "cp.b $update_load_addr $appl_entry_addr $filesize; "\
- CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
- "else " \
- "echo *** update not allowed (update_allowed=$update_allowed); "\
- "fi\0" \
- "fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \
- "fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \
- "fs_name=ADNPESC1/base32/romfs.img\0" \
- "fs_update=" \
- "if itest.b $update_allowed != 0; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $fs_name; " \
- "protect off $fs_base_addr $fs_end_addr; " \
- "era $fs_base_addr $fs_end_addr; " \
- "cp.b $update_load_addr $fs_base_addr $filesize; "\
- CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
- "else " \
- "echo *** update not allowed (update_allowed=$update_allowed); "\
- "fi\0" \
- "uboot_name=ADNPESC1/base32/u-boot.bin\0" \
- "uboot_loadnrun=" \
- "if ping $serverip; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $uboot_name; " \
- "wd off; " \
- "go $update_load_addr; " \
- "else " \
- "echo *** missing connection to $serverip; " \
- "echo *** check your network and try again...; "\
- "fi\0"
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * WATCHDOG (or better MAX823 supervisory circuite access)
- *----------------------------------------------------------------------*/
-#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
-
-#ifdef CONFIG_HW_WATCHDOG
-
-/* MAX823 supervisor -- watchdog enable port at: */
-#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
-#endif
-
-/* MAX823 supervisor -- watchdog trigger port at: */
-#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
-#endif
-
-#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
-#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
-#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
-#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
-#else
-#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
-#endif
-
-#endif /* CONFIG_HW_WATCHDOG */
-
-/*------------------------------------------------------------------------
- * SERIAL PERIPHAREL INTERFACE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-
-#define CONFIG_NIOS_SPI 1 /* SPI support active */
-#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0
-#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS
-
-#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
-#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */
-
-#else
-#undef CONFIG_NIOS_SPI /* NO SPI support */
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 02:80:ae:20:60:6f
-#define CONFIG_NETMASK 255.255.255.248
-#define CONFIG_IPADDR 192.168.161.84
-#define CONFIG_SERVERIP 192.168.161.85
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * Diagnostics / Power On Self Tests
- *----------------------------------------------------------------------*/
-#define CONFIG_POST CONFIG_SYS_POST_RTC
-#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SPI
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser
- undef to save memory */
-#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> "
-#endif
-
-/* Default load address */
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
-
-#elif (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 1
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef CONFIG_SYS_LOAD_ADDR /* force error break */
-#endif
-
-/* MEM test area */
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 0
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#endif
-
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-
-#else
-#undef CONFIG_SYS_MEMTEST_START /* force error break */
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h
deleted file mode 100644
index 1fe8d095be4..00000000000
--- a/include/configs/ADNPESC1_base_32.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_ADNPESC1_BASE_32_H
-#define __CONFIG_ADNPESC1_BASE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/ADNPESC1.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be undefined or defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #undef CONFIG_SYS_NIOS_CPU_OCI_BASE
- * #undef CONFIG_SYS_NIOS_CPU_OCI_SIZE
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x03000000 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x02000000 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
-
-/* on-chip extensions */
-#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
-#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
-#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 1 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_UART1 0x00000820 /* UART1 addr */
-#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* serial peripheral i/o */
-#define CONFIG_SYS_NIOS_CPU_SPI_NUMS 1 /* number of spis */
-
-#define CONFIG_SYS_NIOS_CPU_SPI0 0x000008c0 /* SPI0 addr */
-#define CONFIG_SYS_NIOS_CPU_SPI0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_SPI0_BITS 16 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_SPI0_MA 1 /* is master: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_SLN 1 /* num slaves */
-#define CONFIG_SYS_NIOS_CPU_SPI0_TCLK 250000 /* clock (Hz) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2 /* delay (usec) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_FB 0 /* first bit msb(0) */
- /* lsb(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 14 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00000880 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x000008a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x000008b0 /* PIO5 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO5_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x00000900 /* PIO6 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO6_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x00000910 /* PIO7 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO7_IRQ 31 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO8 0x00000920 /* PIO8 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO8_IRQ 32 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO8_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO8_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO9 0x00000930 /* PIO9 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO9_IRQ 33 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO9_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO9_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO10 0x00000940 /* PIO10 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO10_IRQ 34 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO10_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO10_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO11 0x00000950 /* PIO11 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO11_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO11_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO11_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO12 0x00000960 /* PIO12 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO12_IRQ 36 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO12_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO12_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO13 0x00000970 /* PIO113 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO13_IRQ 37 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO13_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO13_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 2 /* number of IDE contr. */
-
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00001000 /* IDE0 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 36 /* IRQ */
-
-#define CONFIG_SYS_NIOS_CPU_IDE1 0x00001020 /* IDE1 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE1_IRQ 37 /* IRQ */
-
-/* memory accessibility */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x02000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x01000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS (0) /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 16 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: openmac(2) */
- /* ex: alteramac(3) */
-
-/* external extension */
-#define CONFIG_SYS_NIOS_CPU_CS0_BASE 0x40000000 /* board EXT0 addr */
-#define CONFIG_SYS_NIOS_CPU_CS0_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS1_BASE 0x41000000 /* board EXT1 addr */
-#define CONFIG_SYS_NIOS_CPU_CS1_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS2_BASE 0x42000000 /* board EXT2 addr */
-#define CONFIG_SYS_NIOS_CPU_CS2_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS3_BASE 0x43000000 /* board EXT3 addr */
-#define CONFIG_SYS_NIOS_CPU_CS3_SIZE (16*1024*1024) /* max. 16 MB size */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
-#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
-
-#define CONFIG_SYS_NIOS_CPU_PORTA_PIO 0 /* PIO0: Port A */
-#define CONFIG_SYS_NIOS_CPU_PORTB_PIO 1 /* PIO1: Port D */
-#define CONFIG_SYS_NIOS_CPU_PORTC_PIO 2 /* PIO2: Port C */
-#define CONFIG_SYS_NIOS_CPU_RCM_PIO 3 /* PIO3: RCM jumper */
-#define CONFIG_SYS_NIOS_CPU_WDENA_PIO 4 /* PIO4: watchdog enable*/
-#define CONFIG_SYS_NIOS_CPU_WDTOG_PIO 5 /* PIO5: watchdog trigg.*/
-
-/* PIOx: LED bar */
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO CONFIG_SYS_NIOS_CPU_PORTA_PIO
-#else
-#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* no LED bar */
-#endif
-
-#endif /* __CONFIG_ADNPESC1_BASE_32_H */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
deleted file mode 100644
index cdc488b38e2..00000000000
--- a/include/configs/DK1C20.h
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * Stephan Linz <linz@li-pro.net>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1C20_safe_32.h>
-#elif defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1C20_standard_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
-#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define SEVENSEG_WRONLY 1
-#else
-#undef SEVENSEG_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- * (U8) HI:D[15..8] (U9) LO:D[7..0]
- * ______ ______
- * | D14 | | D6 |
- * | | | |
- * D9| |D13 D1| |D5
- * |______| |______| ___
- * | D8 | | D0 | | A |
- * | | | | F|___|B
- * D10| |D12 D2| |D4 | G |
- * |______| |______| E|___|C
- * D11 * D3 * D *
- * D15 D7 DP
- *
- */
-#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
-#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
-#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
-#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
-#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
-#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
-#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
-#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
-#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * ASMI - Active Serial Memory Interface.
- *
- * ASMI is for Cyclone devices only and only works when the configuration
- * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS_ASMI /* Enable ASMI */
-#define CONFIG_SYS_NIOS_ASMIBASE CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * COMPACT FLASH
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_IDE)
-#define CONFIG_IDE_PREINIT /* Implement id_preinit */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0x00920a00 /* IDE/ATA base addr */
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */
-#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */
-#define CONFIG_DOS_PARTITION
-
-/* Board-specific cf regs */
-#define CONFIG_SYS_CF_PRESENT 0x009209b0 /* CF Present PIO base */
-#define CONFIG_SYS_CF_POWER 0x009209c0 /* CF Power FET PIO base*/
-#define CONFIG_SYS_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */
-
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "DK1C20 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE /* Default load address */
-#else
-#undef CONFIG_SYS_LOAD_ADDR
-#endif
-
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* SDRAM til stack area */
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */
-#else
-#undef CONFIG_SYS_MEMTEST_START
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h
deleted file mode 100644
index 86e4869f13f..00000000000
--- a/include/configs/DK1C20_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_SAFE_32_H
-#define __CONFIG_DK1C20_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
-
-#endif /* __CONFIG_DK1C20_SAFE_32_H */
diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h
deleted file mode 100644
index c08aaae0196..00000000000
--- a/include/configs/DK1C20_standard_32.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_STANDARD_32_H
-#define __CONFIG_DK1C20_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
-#define CONFIG_SYS_NIOS_CPU_RAM_SIZE 0 /* size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* active serial memory i/f */
-#define CONFIG_SYS_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
-#define CONFIG_SYS_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
-#define CONFIG_SYS_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
-
-/* memory accessibility */
-#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
-#endif /* __CONFIG_DK1C20_STANDARD_32_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
deleted file mode 100644
index 6e788610fde..00000000000
--- a/include/configs/DK1S10.h
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1S10_safe_32.h>
-#elif defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1S10_standard_32.h>
-#elif defined(CONFIG_NIOS_MTX_LDK_20)
-#include <configs/DK1S10_mtx_ldk_20.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-
-#if defined(CONFIG_NIOS_STANDARD_32)
-#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
-#elif defined(CONFIG_NIOS_MTX_LDK_20)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
-#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define SEVENSEG_WRONLY 1
-#else
-#undef SEVENSEG_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- * (U8) HI:D[15..8] (U9) LO:D[7..0]
- * ______ ______
- * | D14 | | D6 |
- * | | | |
- * D9| |D13 D1| |D5
- * |______| |______| ___
- * | D8 | | D0 | | A |
- * | | | | F|___|B
- * D10| |D12 D2| |D4 | G |
- * |______| |______| E|___|C
- * D11 * D3 * D *
- * D15 D7 DP
- *
- */
-#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
-#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
-#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
-#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
-#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
-#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
-#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
-#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
-#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/* Default load address */
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
-
-#elif (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef CONFIG_SYS_LOAD_ADDR /* force error break */
-#endif
-
-
-/* MEM test area */
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#else
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#endif
-
-#else
-#undef CONFIG_SYS_MEMTEST_START /* force error break */
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
deleted file mode 100644
index 87a8a543807..00000000000
--- a/include/configs/DK1S10_mtx_ldk_20.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
-#define __CONFIG_DK1S10_MTX_LDK_20_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 75000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x02000000 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x01000000 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
-
-/* on-chip extensions */
-#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
-#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
-#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 2 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_UART1 0x000008a0 /* UART1 addr */
-#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 2 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
-
-/* memory accessibility */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00800000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: openmac(2) */
- /* ex: alteramac(3) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
-#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
-
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 0 /* PIO0: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 1 /* PIO1: buttons */
-#undef CONFIG_SYS_NIOS_CPU_LCD_PIO /* PIOx: ASCII LCD */
-#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* PIOx: LED bar */
-#undef CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO /* PIOx: 7-seg. display */
-#undef CONFIG_SYS_NIOS_CPU_RECONF_PIO /* PIOx: reconf pin */
-#undef CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO /* PIOx: CF present IRQ */
-#undef CONFIG_SYS_NIOS_CPU_CFATASEL_PIO /* PIOx: CF ATA select */
-
-#endif /* __CONFIG_DK1S10_MTX_LDK_20_H */
diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h
deleted file mode 100644
index ced4ef281ce..00000000000
--- a/include/configs/DK1S10_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_SAFE_32_H
-#define __CONFIG_DK1S10_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
-
-#endif /* __CONFIG_DK1S10_SAFE_32_H */
diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h
deleted file mode 100644
index e6ccaf57ab0..00000000000
--- a/include/configs/DK1S10_standard_32.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_STANDARD_32_H
-#define __CONFIG_DK1S10_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
-#define CONFIG_SYS_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* memory accessibility */
-#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
-#endif /* __CONFIG_DK1S10_STANDARD_32_H */