diff options
Diffstat (limited to 'include/configs/xaeniax.h')
-rw-r--r-- | include/configs/xaeniax.h | 555 |
1 files changed, 555 insertions, 0 deletions
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h new file mode 100644 index 00000000000..569788ab7a2 --- /dev/null +++ b/include/configs/xaeniax.h @@ -0,0 +1,555 @@ +/* + * (C) Copyright 2004 + * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the xaeniax board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* +#undef CONFIG_INIT_CRITICAL +*/ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ +#define CONFIG_XAENIAX 1 /* on a xaeniax board */ + + +#define BOARD_LATE_INIT 1 + + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * select serial console configuration + */ +#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */ + + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DIAG | CFG_CMD_SDRAM & ~CONFIG_CMD_DTT) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.68.201 +#define CONFIG_SERVERIP 192.168.68.62 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "bootm 0x00100000" +#define CONFIG_BOOTARGS "console=ttyS1,115200" +#define CONFIG_CMDLINE_TAG1 /* enable passing of ATAGs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Size of malloc() pool; this lives below the uppermost 128 KiB which are + * used for the RAM copy of the uboot code + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_HUSH_PARSER 1 + +#define CFG_PROMPT_HUSH_PS2 "> " + +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "u-boot$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "u-boot=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* FIXME */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * SMSC91C111 Network Card + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x0C00030 /* chip select 3 */ +#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ +#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ +#undef CONFIG_SHOW_ACTIVITY +#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ + +/* + * GPIO settings + */ + +/* + * GP05 == nUSBReset is 1 + * GP10 == CFReset is 1 + * GP13 == nCFDataEnable is 1 + * GP14 == nCFAddrEnable is 1 + * GP15 == nCS1 is 1 + * GP21 == ComBrdReset is 1 + * GP24 == SFRM is 1 + * GP25 == TXD is 1 + * GP31 == SYNC is 1 + * GP33 == nCS5 is 1 + * GP39 == FFTXD is 1 + * GP41 == RTS is 1 + * GP43 == BTTXD is 1 + * GP45 == BTRTS is 1 + * GP47 == TXD is 1 + * GP48 == nPOE is 1 + * GP49 == nPWE is 1 + * GP50 == nPIOR is 1 + * GP51 == nPIOW is 1 + * GP52 == nPCE[1] is 1 + * GP53 == nPCE[2] is 1 + * GP54 == nPSKTSEL is 1 + * GP55 == nPREG is 1 + * GP78 == nCS2 is 1 + * GP79 == nCS3 is 1 + * GP80 == nCS4 is 1 + * GP82 == NSSPSFRM is 1 + * GP83 == NSSPTXD is 1 + */ +#define CFG_GPSR0_VAL 0x8320E420 +#define CFG_GPSR1_VAL 0x00FFAA82 +#define CFG_GPSR2_VAL 0x000DC000 + +/* + * GP03 == LANReset is 0 + * GP06 == USBWakeUp is 0 + * GP11 == USBControl is 0 + * GP12 == Buzzer is 0 + * GP16 == PWM0 is 0 + * GP17 == PWM1 is 0 + * GP23 == SCLK is 0 + * GP30 == SDATA_OUT is 0 + * GP81 == NSSPCLK is 0 + */ +#define CFG_GPCR0_VAL 0x40C31868 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00020000 + +/* + * GP00 == CPUWakeUpUSB is input + * GP01 == GP reset is input + * GP02 == LANInterrupt is input + * GP03 == LANReset is output + * GP04 == USBInterrupt is input + * GP05 == nUSBReset is output + * GP06 == USBWakeUp is output + * GP07 == CFReady/nBusy is input + * GP08 == nCFCardDetect1 is input + * GP09 == nCFCardDetect2 is input + * GP10 == nCFReset is output + * GP11 == USBControl is output + * GP12 == Buzzer is output + * GP13 == CFDataEnable is output + * GP14 == CFAddressEnable is output + * GP15 == nCS1 is output + * GP16 == PWM0 is output + * GP17 == PWM1 is output + * GP18 == RDY is input + * GP19 == ReaderReady is input + * GP20 == ReaderReset is input + * GP21 == ComBrdReset is output + * GP23 == SCLK is output + * GP24 == SFRM is output + * GP25 == TXD is output + * GP26 == RXD is input + * GP27 == EXTCLK is input + * GP28 == BITCLK is output + * GP29 == SDATA_IN0 is input + * GP30 == SDATA_OUT is output + * GP31 == SYNC is output + * GP32 == SYSSCLK is output + * GP33 == nCS5 is output + * GP34 == FFRXD is input + * GP35 == CTS is input + * GP36 == DCD is input + * GP37 == DSR is input + * GP38 == RI is input + * GP39 == FFTXD is output + * GP40 == DTR is output + * GP41 == RTS is output + * GP42 == BTRXD is input + * GP43 == BTTXD is output + * GP44 == BTCTS is input + * GP45 == BTRTS is output + * GP46 == RXD is input + * GP47 == TXD is output + * GP48 == nPOE is output + * GP49 == nPWE is output + * GP50 == nPIOR is output + * GP51 == nPIOW is output + * GP52 == nPCE[1] is output + * GP53 == nPCE[2] is output + * GP54 == nPSKTSEL is output + * GP55 == nPREG is output + * GP56 == nPWAIT is input + * GP57 == nPIOS16 is input + * GP58 == LDD[0] is output + * GP59 == LDD[1] is output + * GP60 == LDD[2] is output + * GP61 == LDD[3] is output + * GP62 == LDD[4] is output + * GP63 == LDD[5] is output + * GP64 == LDD[6] is output + * GP65 == LDD[7] is output + * GP66 == LDD[8] is output + * GP67 == LDD[9] is output + * GP68 == LDD[10] is output + * GP69 == LDD[11] is output + * GP70 == LDD[12] is output + * GP71 == LDD[13] is output + * GP72 == LDD[14] is output + * GP73 == LDD[15] is output + * GP74 == LCD_FCLK is output + * GP75 == LCD_LCLK is output + * GP76 == LCD_PCLK is output + * GP77 == LCD_ACBIAS is output + * GP78 == nCS2 is output + * GP79 == nCS3 is output + * GP80 == nCS4 is output + * GP81 == NSSPCLK is output + * GP82 == NSSPSFRM is output + * GP83 == NSSPTXD is output + * GP84 == NSSPRXD is input + */ +#define CFG_GPDR0_VAL 0xD3E3FC68 +#define CFG_GPDR1_VAL 0xFCFFAB83 +#define CFG_GPDR2_VAL 0x000FFFFF + +/* + * GP01 == GP reset is AF01 + * GP15 == nCS1 is AF10 + * GP16 == PWM0 is AF10 + * GP17 == PWM1 is AF10 + * GP18 == RDY is AF01 + * GP23 == SCLK is AF10 + * GP24 == SFRM is AF10 + * GP25 == TXD is AF10 + * GP26 == RXD is AF01 + * GP27 == EXTCLK is AF01 + * GP28 == BITCLK is AF01 + * GP29 == SDATA_IN0 is AF10 + * GP30 == SDATA_OUT is AF01 + * GP31 == SYNC is AF01 + * GP32 == SYSCLK is AF01 + * GP33 == nCS5 is AF10 + * GP34 == FFRXD is AF01 + * GP35 == CTS is AF01 + * GP36 == DCD is AF01 + * GP37 == DSR is AF01 + * GP38 == RI is AF01 + * GP39 == FFTXD is AF10 + * GP40 == DTR is AF10 + * GP41 == RTS is AF10 + * GP42 == BTRXD is AF01 + * GP43 == BTTXD is AF10 + * GP44 == BTCTS is AF01 + * GP45 == BTRTS is AF10 + * GP46 == RXD is AF10 + * GP47 == TXD is AF01 + * GP48 == nPOE is AF10 + * GP49 == nPWE is AF10 + * GP50 == nPIOR is AF10 + * GP51 == nPIOW is AF10 + * GP52 == nPCE[1] is AF10 + * GP53 == nPCE[2] is AF10 + * GP54 == nPSKTSEL is AF10 + * GP55 == nPREG is AF10 + * GP56 == nPWAIT is AF01 + * GP57 == nPIOS16 is AF01 + * GP58 == LDD[0] is AF10 + * GP59 == LDD[1] is AF10 + * GP60 == LDD[2] is AF10 + * GP61 == LDD[3] is AF10 + * GP62 == LDD[4] is AF10 + * GP63 == LDD[5] is AF10 + * GP64 == LDD[6] is AF10 + * GP65 == LDD[7] is AF10 + * GP66 == LDD[8] is AF10 + * GP67 == LDD[9] is AF10 + * GP68 == LDD[10] is AF10 + * GP69 == LDD[11] is AF10 + * GP70 == LDD[12] is AF10 + * GP71 == LDD[13] is AF10 + * GP72 == LDD[14] is AF10 + * GP73 == LDD[15] is AF10 + * GP74 == LCD_FCLK is AF10 + * GP75 == LCD_LCLK is AF10 + * GP76 == LCD_PCLK is AF10 + * GP77 == LCD_ACBIAS is AF10 + * GP78 == nCS2 is AF10 + * GP79 == nCS3 is AF10 + * GP80 == nCS4 is AF10 + * GP81 == NSSPCLK is AF01 + * GP82 == NSSPSFRM is AF01 + * GP83 == NSSPTXD is AF01 + * GP84 == NSSPRXD is AF10 + */ +#define CFG_GAFR0_L_VAL 0x80000004 +#define CFG_GAFR0_U_VAL 0x595A801A +#define CFG_GAFR1_L_VAL 0x699A9559 +#define CFG_GAFR1_U_VAL 0xAAA5AAAA +#define CFG_GAFR2_L_VAL 0xAAAAAAAA +#define CFG_GAFR2_U_VAL 0x00000256 + +/* + * clock settings + */ +/* RDH = 1 + * PH = 0 + * VFS = 0 + * BFS = 0 + * SSS = 0 + */ +#define CFG_PSSR_VAL 0x00000030 + +#define CFG_CKEN_VAL 0x00000080 /* */ +#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ + + +/* + * Memory settings + * + * This is the configuration for nCS0/1 -> flash banks + * configuration for nCS1 : + * [31] 0 - + * [30:28] 000 - + * [27:24] 0000 - + * [23:20] 0000 - + * [19] 0 - + * [18:16] 000 - + * configuration for nCS0: + * [15] 0 - Slower Device + * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns + * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns + * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?) + * [03] 0 - 32 Bit bus width + * [02:00] 010 - burst OF 4 ROM or FLASH +*/ +#define CFG_MSC0_VAL 0x000023D2 + +/* This is the configuration for nCS2/3 -> USB controller, LAN + * configuration for nCS3: LAN + * [31] 0 - Slower Device + * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns + * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns + * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns + * [19] 0 - 32 Bit bus width + * [18:16] 100 - variable latency I/O + * configuration for nCS2: USB + * [15] 1 - Faster Device + * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns + * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns + * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns + * [03] 0 - 32 Bit bus width + * [02:00] 100 - variable latency I/O + */ +#define CFG_MSC1_VAL 0x1224A264 + +/* This is the configuration for nCS4/5 -> LAN + * configuration for nCS5: + * [31] 0 - + * [30:28] 000 - + * [27:24] 0000 - + * [23:20] 0000 - + * [19] 0 - + * [18:16] 000 - + * configuration for nCS4: LAN + * [15] 1 - Faster Device + * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns + * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns + * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns + * [03] 0 - 32 Bit bus width + * [02:00] 100 - variable latency I/O + */ +#define CFG_MSC2_VAL 0x00001224 + +/* MDCNFG: SDRAM Configuration Register + * + * [31:29] 000 - reserved + * [28] 0 - no SA1111 compatiblity mode + * [27] 0 - latch return data with return clock + * [26] 0 - alternate addressing for pair 2/3 + * [25:24] 00 - timings + * [23] 0 - internal banks in lower partition 2/3 (not used) + * [22:21] 00 - row address bits for partition 2/3 (not used) + * [20:19] 00 - column address bits for partition 2/3 (not used) + * [18] 0 - SDRAM partition 2/3 width is 32 bit + * [17] 0 - SDRAM partition 3 disabled + * [16] 0 - SDRAM partition 2 disabled + * [15:13] 000 - reserved + * [12] 0 - no SA1111 compatiblity mode + * [11] 1 - latch return data with return clock + * [10] 0 - no alternate addressing for pair 0/1 + * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk + * [7] 1 - 4 internal banks in lower partition pair + * [06:05] 10 - 13 row address bits for partition 0/1 + * [04:03] 01 - 9 column address bits for partition 0/1 + * [02] 0 - SDRAM partition 0/1 width is 32 bit + * [01] 0 - disable SDRAM partition 1 + * [00] 1 - enable SDRAM partition 0 + */ +/* use the configuration above but disable partition 0 */ +#define CFG_MDCNFG_VAL 0x00000AC9 + +/* MDREFR: SDRAM Refresh Control Register + * + * [32:26] 0 - reserved + * [25] 0 - K2FREE: not free running + * [24] 0 - K1FREE: not free running + * [23] 0 - K0FREE: not free running + * [22] 0 - SLFRSH: self refresh disabled + * [21] 0 - reserved + * [20] 1 - APD: auto power down + * [19] 0 - K2DB2: SDCLK2 is MemClk + * [18] 0 - K2RUN: disable SDCLK2 + * [17] 0 - K1DB2: SDCLK1 is MemClk + * [16] 1 - K1RUN: enable SDCLK1 + * [15] 1 - E1PIN: SDRAM clock enable + * [14] 0 - K0DB2: SDCLK0 is MemClk + * [13] 0 - K0RUN: disable SDCLK0 + * [12] 0 - E0PIN: disable SDCKE0 + * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 + */ +#define CFG_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */ + +/* MDMRS: Mode Register Set Configuration Register + * + * [31] 0 - reserved + * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) + * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used) + * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) + * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) + * [15] 0 - reserved + * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. + * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency. + * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. + * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. + */ +#define CFG_MDMRS_VAL 0x00320032 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + + +#endif /* __CONFIG_H */ |