summaryrefslogtreecommitdiff
path: root/include/configs/scb9328.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/scb9328.h')
-rw-r--r--include/configs/scb9328.h357
1 files changed, 357 insertions, 0 deletions
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
new file mode 100644
index 00000000000..6cd91269d43
--- /dev/null
+++ b/include/configs/scb9328.h
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * 2003/13/06 Initial MP10 Support copied from wepep250
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
+#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+#define CONFIG_IMX_SERIAL1
+/*
+ * Select serial console configuration
+ */
+
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+ | CFG_CMD_NET \
+ | CFG_CMD_PING \
+ | CFG_CMD_DHCP \
+ )
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ * NOTE: Sending parameters to kernel depends on kernel version and
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * parameters at all! Do not get confused by them so.
+ */
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
+#define CONFIG_BOOTCOMMAND "bootm 10040000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_ETHADDR 80:81:82:83:84:85
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.10.10.9
+#define CONFIG_SERVERIP 10.10.10.10
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "scb9328> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0x08100000 /* memtest test area */
+#define CFG_MEMTEST_END 0x08F00000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG 1 /* send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/* SDRAM Setup Values
+0x910a8300 Precharge Command CAS 3
+0x910a8200 Precharge Command CAS 2
+
+0xa10a8300 AutoRefresh Command CAS 3
+0xa10a8200 Set AutoRefresh Command CAS 2 */
+
+#define PRECHARGE_CMD 0x910a8200
+#define AUTOREFRESH_CMD 0xa10a8200
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * SDRAM Memory Map
+ */
+/* SH FIXME */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */
+#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+/*
+ * Flash Controller settings
+ */
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * Configuration for FLASH memory for the Synertronixx board
+ */
+
+/* #define SCB9328_FLASH_32M */
+
+/* 32MB */
+#ifdef SCB9328_FLASH_32M
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#else
+
+/* 16MB */
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#endif /* SCB9328_FLASH_32M */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE SCB9328_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+/* Setup for PA23 which is Reset Default PA23 but has to become
+ CS5 */
+
+#define CFG_GPR_A_VAL 0x00800000
+#define CFG_GIUS_A_VAL 0x0043fffe
+
+#define CFG_MONITOR_BASE 0x10000000
+#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x20000
+
+#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
+
+/*
+ * CSxU_VAL:
+ * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
+ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x000F2000
+#define CFG_CS0L_VAL 0x11110d01
+#define CFG_CS1U_VAL 0x000F0a00
+#define CFG_CS1L_VAL 0x11110601
+#define CFG_CS2U_VAL 0x0
+#define CFG_CS2L_VAL 0x0
+
+#define CFG_CS3U_VAL 0x000FFFFF
+#define CFG_CS3L_VAL 0x00000303
+
+#define CFG_CS4U_VAL 0x000F0a00
+#define CFG_CS4L_VAL 0x11110301
+
+/* CNC == 3 too long
+ #define CFG_CS5U_VAL 0x0000C210 */
+
+/* #define CFG_CS5U_VAL 0x00008400
+ mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
+ kaum langsamer ist */
+/* #define CFG_CS5U_VAL 0x00009400
+ #define CFG_CS5L_VAL 0x11010D03 */
+
+#define CFG_CS5U_VAL 0x00008400
+#define CFG_CS5L_VAL 0x00000D03
+
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x16000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE+4)
+/* #define CONFIG_DM9000_USE_8BIT */
+#define CONFIG_DM9000_USE_16BIT
+/* #define CONFIG_DM9000_USE_32BIT */
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+ f_ref=16,777MHz
+
+ 0x002a141f: 191,9944MHz
+ 0x040b2007: 144MHz
+ 0x042a141f: 96MHz
+ 0x0811140d: 64MHz
+ 0x040e200e: 150MHz
+ 0x00321431: 200MHz
+
+ 0x08001800: 64MHz mit 16er Quarz
+ 0x04001800: 96MHz mit 16er Quarz
+ 0x04002400: 144MHz mit 16er Quarz
+
+ 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+ |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
+
+#define CPU200
+
+#ifdef CPU200
+#define CFG_MPCTL0_VAL 0x00321431
+#else
+#define CFG_MPCTL0_VAL 0x040e200e
+#endif
+
+/* #define BUS64 */
+#define BUS72
+
+#ifdef BUS72
+#define CFG_SPCTL0_VAL 0x04002400
+#endif
+
+#ifdef BUS96
+#define CFG_SPCTL0_VAL 0x04001800
+#endif
+
+#ifdef BUS64
+#define CFG_SPCTL0_VAL 0x08001800
+#endif
+
+/* Das ist der BCLK Divider, der aus der System PLL
+ BCLK und HCLK erzeugt:
+ 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
+ 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
+ 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
+ 0x2f001003 : 192MHz/5=38,4MHz
+ 0x2f000003 : 64MHz/1
+ Bit 22: SPLL Restart
+ Bit 21: MPLL Restart */
+
+#ifdef BUS64
+#define CFG_CSCR_VAL 0x2f030003
+#endif
+
+#ifdef BUS72
+#define CFG_CSCR_VAL 0x2f030403
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define MHZ16QUARZINUSE
+
+#ifdef MHZ16QUARZINUSE
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+#else
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+
+/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
+#define CFG_FMCR_VAL 0x00000001
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+ 0x000b00b ->b<- -> 192MHz/12=16MHz
+ 0x000b00b ->8<- -> 144MHz/09=16MHz
+ 0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef BUS96
+#define CFG_PCDR_VAL 0x000b00b5
+#endif
+
+#ifdef BUS64
+#define CFG_PCDR_VAL 0x000b00b3
+#endif
+
+#ifdef BUS72
+#define CFG_PCDR_VAL 0x000b00b8
+#endif
+
+#endif /* __CONFIG_H */