summaryrefslogtreecommitdiff
path: root/include/configs/sc3.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/sc3.h')
-rw-r--r--include/configs/sc3.h224
1 files changed, 112 insertions, 112 deletions
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 88a24b8797..44135dfac5 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -128,7 +128,7 @@
#undef CONFIG_BOOTCOMMAND
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
#if 1 /* feel free to disable for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
@@ -160,7 +160,7 @@
#undef CONFIG_ISP1161_PRESENT
#undef CONFIG_LOADS_ECHO /* no echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_NET_MULTI
/* #define CONFIG_EEPRO100_SROM_WRITE */
@@ -205,42 +205,42 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP 1 /* undef to save memory */
-#define CFG_PROMPT "SC3> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
+#define CONFIG_SYS_PROMPT "SC3> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
* The Linux BASE_BAUD define should match this configuration.
* baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
* set Linux BASE_BAUD to 403200.
*
* Consider the OPB clock! If it get lower the BASE_BAUD must be lower to
* (see 405GP datasheet for descritpion)
*/
-#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD 921600 /* internal clock */
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD 921600 /* internal clock */
/* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-#define CFG_LOAD_ADDR 0x1000000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* IIC stuff
@@ -253,11 +253,11 @@
#define I2C_ACTIVE 0
#define I2C_TRISTATE 0
-#define CFG_I2C_SPEED 100000 /* use the standard 100kHz speed */
-#define CFG_I2C_SLAVE 0x7F /* mask valid bits */
+#define CONFIG_SYS_I2C_SPEED 100000 /* use the standard 100kHz speed */
+#define CONFIG_SYS_I2C_SLAVE 0x7F /* mask valid bits */
#define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
/*-----------------------------------------------------------------------
* PCI stuff
@@ -275,14 +275,14 @@
/* If you want to see, whats connected to your PCI bus */
/* #define CONFIG_PCI_SCAN_SHOW */
-#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
+#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* External peripheral base address
@@ -306,103 +306,103 @@
#define CONFIG_ATAPI
#define CONFIG_DOS_PARTITION
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
#ifndef IDE_USES_ISA_EMULATION
/* New and faster access */
-#define CFG_ATA_BASE_ADDR 0x7A000000 /* start of ISA IO emulation */
+#define CONFIG_SYS_ATA_BASE_ADDR 0x7A000000 /* start of ISA IO emulation */
/* How many IDE busses are available */
-#define CFG_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXBUS 1
/* What IDE ports are available */
-#define CFG_ATA_IDE0_OFFSET 0x000 /* first is available */
-#undef CFG_ATA_IDE1_OFFSET /* second not available */
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x000 /* first is available */
+#undef CONFIG_SYS_ATA_IDE1_OFFSET /* second not available */
/* access to the data port is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
-#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_DATA_OFFSET + 0 */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
/* access to the registers is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
-#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_REG_OFFSET + [1..7] */
+#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
/* access to the alternate register is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
-#define CFG_ATA_ALT_OFFSET 0x008 /* Offset for alternate registers */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_ALT_OFFSET + 6 */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x008 /* Offset for alternate registers */
#else /* IDE_USES_ISA_EMULATION */
-#define CFG_ATA_BASE_ADDR 0x79000000 /* start of ISA IO emulation */
+#define CONFIG_SYS_ATA_BASE_ADDR 0x79000000 /* start of ISA IO emulation */
/* How many IDE busses are available */
-#define CFG_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXBUS 1
/* What IDE ports are available */
-#define CFG_ATA_IDE0_OFFSET 0x01F0 /* first is available */
-#undef CFG_ATA_IDE1_OFFSET /* second not available */
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* first is available */
+#undef CONFIG_SYS_ATA_IDE1_OFFSET /* second not available */
/* access to the data port is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
-#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_DATA_OFFSET + 0 */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
/* access to the registers is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
-#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_REG_OFFSET + [1..7] */
+#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
/* access to the alternate register is calculated:
- CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
-#define CFG_ATA_ALT_OFFSET 0x03F0 /* Offset for alternate registers */
+ CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_ALT_OFFSET + 6 */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x03F0 /* Offset for alternate registers */
#endif /* IDE_USES_ISA_EMULATION */
#endif
/*
-#define CFG_KEY_REG_BASE_ADDR 0xF0100000
-#define CFG_IR_REG_BASE_ADDR 0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000
+#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000
+#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000
*/
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*
- * CFG_FLASH_BASE -> start address of internal flash
- * CFG_MONITOR_BASE -> start of u-boot
+ * CONFIG_SYS_FLASH_BASE -> start address of internal flash
+ * CONFIG_SYS_MONITOR_BASE -> start of u-boot
*/
#ifndef __ASSEMBLER__
extern unsigned long offsetOfBigFlash;
extern unsigned long offsetOfEnvironment;
#endif
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFE00000
-#define CFG_MONITOR_BASE 0xFFFC0000 /* placed last 256k */
-#define CFG_MONITOR_LEN (224 * 1024) /* Reserve 224 KiB for Monitor */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xFFE00000
+#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000 /* placed last 256k */
+#define CONFIG_SYS_MONITOR_LEN (224 * 1024) /* Reserve 224 KiB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MiB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization ## FIXME: lookup in datasheet
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_CFI /* flash is CFI compat. */
+#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver*/
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
-#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_WRITE_SWAPPED_DATA /* swap Databytes between reading/writing */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */
+#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_WRITE_SWAPPED_DATA /* swap Databytes between reading/writing */
#define CONFIG_ENV_IS_IN_FLASH 1
#ifdef CONFIG_ENV_IS_IN_FLASH
@@ -421,9 +421,9 @@ extern unsigned long offsetOfEnvironment;
/*
* NAND-FLASH stuff
*/
-#define CFG_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
-#define CFG_NAND_BASE 0x77D00000
+#define CONFIG_SYS_NAND_BASE 0x77D00000
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
@@ -439,55 +439,55 @@ extern unsigned long offsetOfEnvironment;
*
*/
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE
+#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE
#define FLASH_BASE1_PRELIM 0
/*-----------------------------------------------------------------------
* Some informations about the internal SRAM (OCM=On Chip Memory)
*
- * CFG_OCM_DATA_ADDR -> location
- * CFG_OCM_DATA_SIZE -> size
+ * CONFIG_SYS_OCM_DATA_ADDR -> location
+ * CONFIG_SYS_OCM_DATA_SIZE -> size
*/
-#define CFG_TEMP_STACK_OCM 1
-#define CFG_OCM_DATA_ADDR 0xF8000000
-#define CFG_OCM_DATA_SIZE 0x1000
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM):
* - we are using the internal 4k SRAM, so we don't need data cache mapping
- * - internal SRAM (OCM=On Chip Memory) is placed to CFG_OCM_DATA_ADDR
+ * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
* - Stackpointer will be located to
- * (CFG_INIT_RAM_ADDR&0xFFFF0000) | (CFG_INIT_SP_OFFSET&0x0000FFFF)
+ * (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
* in cpu/ppc4xx/start.S
*/
-#undef CFG_INIT_DCACHE_CS
+#undef CONFIG_SYS_INIT_DCACHE_CS
/* Where the internal SRAM starts */
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR
/* Where the internal SRAM ends (only offset) */
-#define CFG_INIT_RAM_END 0x0F00
+#define CONFIG_SYS_INIT_RAM_END 0x0F00
/*
- CFG_INIT_RAM_ADDR ------> ------------ lower address
+ CONFIG_SYS_INIT_RAM_ADDR ------> ------------ lower address
| |
| ^ |
| | |
| | Stack |
- CFG_GBL_DATA_OFFSET ----> ------------
+ CONFIG_SYS_GBL_DATA_OFFSET ----> ------------
| |
| 64 Bytes |
| |
- CFG_INIT_RAM_END ------> ------------ higher address
+ CONFIG_SYS_INIT_RAM_END ------> ------------ higher address
(offset only)
*/
/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE 64
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE 64
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
/* Initial value of the stack pointern in internal SRAM */
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Internal Definitions
@@ -504,31 +504,31 @@ extern unsigned long offsetOfEnvironment;
/* This chip select accesses the boot device */
/* It depends on boot select switch if this device is 16 or 8 bit */
-#undef CFG_EBC_PB0AP
-#undef CFG_EBC_PB0CR
+#undef CONFIG_SYS_EBC_PB0AP
+#undef CONFIG_SYS_EBC_PB0CR
-#undef CFG_EBC_PB1AP
-#undef CFG_EBC_PB1CR
+#undef CONFIG_SYS_EBC_PB1AP
+#undef CONFIG_SYS_EBC_PB1CR
-#undef CFG_EBC_PB2AP
-#undef CFG_EBC_PB2CR
+#undef CONFIG_SYS_EBC_PB2AP
+#undef CONFIG_SYS_EBC_PB2CR
-#undef CFG_EBC_PB3AP
-#undef CFG_EBC_PB3CR
+#undef CONFIG_SYS_EBC_PB3AP
+#undef CONFIG_SYS_EBC_PB3CR
-#undef CFG_EBC_PB4AP
-#undef CFG_EBC_PB4CR
+#undef CONFIG_SYS_EBC_PB4AP
+#undef CONFIG_SYS_EBC_PB4CR
-#undef CFG_EBC_PB5AP
-#undef CFG_EBC_PB5CR
+#undef CONFIG_SYS_EBC_PB5AP
+#undef CONFIG_SYS_EBC_PB5CR
-#undef CFG_EBC_PB6AP
-#undef CFG_EBC_PB6CR
+#undef CONFIG_SYS_EBC_PB6AP
+#undef CONFIG_SYS_EBC_PB6CR
-#undef CFG_EBC_PB7AP
-#undef CFG_EBC_PB7CR
+#undef CONFIG_SYS_EBC_PB7AP
+#undef CONFIG_SYS_EBC_PB7CR
-#define CFG_EBC_CFG 0xb84ef000
+#define CONFIG_SYS_EBC_CFG 0xb84ef000
#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */
#undef CONFIG_SPD_EEPROM
@@ -543,15 +543,15 @@ extern unsigned long offsetOfEnvironment;
* External peripheral base address
***********************************************************************/
-#define CFG_ISA_MEM_BASE_ADDRESS 0x78000000
+#define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
/*
Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
auf ISA- und PCI-Zyklen)
*/
-#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
-/*#define CFG_ISA_IO_BASE_ADDRESS 0x79000000 */
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000
+/*#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0x79000000 */
/************************************************************
* Video support