summaryrefslogtreecommitdiff
path: root/include/configs/omap3logic.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/omap3logic.h')
-rw-r--r--include/configs/omap3logic.h428
1 files changed, 212 insertions, 216 deletions
diff --git a/include/configs/omap3logic.h b/include/configs/omap3logic.h
index 5dfeb9bb72..6c91462576 100644
--- a/include/configs/omap3logic.h
+++ b/include/configs/omap3logic.h
@@ -125,6 +125,12 @@
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_FASTBOOT 1
+#define CONFIG_TWL4030_USB 1
+#define CONFIG_USB_DEVICE 1
+
#if 0
/* USB
* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
@@ -152,15 +158,34 @@
#endif /* CONFIG_MUSB_HCD */
#ifdef CONFIG_MUSB_UDC
+# ifdef CONFIG_FASTBOOT
+# define CONFIG_CMD_FASTBOOT
+# define CONFIG_FASTBOOT_TRANSFER_BUFFER (PHYS_SDRAM_1 + SZ_16M)
+# define CONFIG_FASTBOOT_TRANSFER_BUFFER_SIZE (SZ_128M - SZ_16M)
+ /* if already present, use already existing NAND macros for block & oob size */
+# define FASTBOOT_NAND_BLOCK_SIZE 2048
+# define FASTBOOT_NAND_OOB_SIZE 64
+ /* Fastboot product name */
+# define FASTBOOT_PRODUCT_NAME "dm3730logic"
+ /* Use HS */
+# define USB_BCD_VERSION 0x0200
+
+# define CONFIG_USBD_VENDORID 0x0451
+# define CONFIG_USBD_PRODUCTID 0x5678
+# define CONFIG_USBD_MANUFACTURER "LogicPD"
+# define CONFIG_USBD_PRODUCT_NAME "EVM"
+//# define CONFIG_USBD_PRODUCT_NAME getenv("logic_model")
+# else
/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+# define CONFIG_USB_DEVICE 1
+# define CONFIG_USB_TTY 1
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "EVM"
+# define CONFIG_USBD_VENDORID 0x0451
+# define CONFIG_USBD_PRODUCTID 0x5678
+# define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+# define CONFIG_USBD_PRODUCT_NAME "EVM"
+# endif /* CONFIG_FASTBOOT */
#endif /* CONFIG_MUSB_UDC */
#endif /* CONFIG_USB_OMAP3 */
@@ -178,6 +203,7 @@
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_NAND /* NAND support */
+#undef CONFIG_CMD_NAND_CHIP_ECC /* nandecc_chip command */
#define CONFIG_MTD_DEVICE /* needed for MTD mtdparts support */
#define CONFIG_CMD_MTDPARTS /* MTD partition support */
#define MTDIDS_NAND_DEFAULT "nand0=omap2-nand.0"
@@ -185,6 +211,7 @@
#define MTDPARTS_NAND_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\
"1664k(u-boot),384k(u-boot-env),"\
"5m(kernel),20m(ramdisk),-(fs)"
+#define MTDFLAGS_NAND_DEFAULT "default=ecc_chip;x-loader=ecc_hw,repeat;fs=yaffs"
#define MTDPARTS_NOR_DEFAULT "physmap-flash.0:-(nor)"
@@ -211,7 +238,7 @@
#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMI /* iminfo */
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_CMD_GPMC_CONFIG /* gpmc_config */
@@ -267,33 +294,35 @@
#define CONFIG_BOOTFILE uImage
#define CONFIG_PREBOOT \
- "echo ; " \
- "echo =================================== NOTICE ===================================;" \
- "echo \"The U-Boot environment was not found. If the display is not set properly \";"\
- "echo \"linux will not have video support.\";" \
- "echo ; " \
- "echo \"Valid display options are:\";" \
- "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \
- "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \
- "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \
- "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \
- "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \
- "echo \" vga[-16 OR -24] LCD VGA 640x480\";" \
- "echo \" svga[-16 OR -24] LCD SVGA 800x600\";" \
- "echo \" xga[-16 OR -24] LCD XGA 1024x768\";" \
- "echo \" 720p[-16 OR -24] LCD 720P 1280x720\";" \
- "echo \" sxga[-16 OR -24] LCD SXGA 1280x1024\";" \
- "echo \" uxga[-16 OR -24] LCD UXGA 1600x1200\";" \
- "echo ; " \
- "echo \"Default `display` environment variable is now being set to: 15\";" \
- "setenv display 15;" \
- "setenv preboot;" \
- "echo ; " \
- "echo \"At the U-Boot prompt type commands: `setenv display <num>`, then type\";" \
- "echo \"`saveenv` to save the environment to NAND flash. This will avoid seeing\";" \
- "echo \"this notice on future boots\" ; " \
- "echo =================================== NOTICE ===================================;" \
- "echo ; "
+ "if true;then\n" \
+ " echo\n" \
+ " echo =================================== NOTICE ===================================\n" \
+ " echo \"The U-Boot environment was not found. If the display is not set properly \"\n"\
+ " echo \"linux will not have video support.\"\n" \
+ " echo \n" \
+ " echo \"Valid display options are:\"\n" \
+ " echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\"\n" \
+ " echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\"\n" \
+ " echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\"\n" \
+ " echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\"\n" \
+ " echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\"\n" \
+ " echo \" vga[-16 OR -24] LCD VGA 640x480\"\n" \
+ " echo \" svga[-16 OR -24] LCD SVGA 800x600\"\n" \
+ " echo \" xga[-16 OR -24] LCD XGA 1024x768\"\n" \
+ " echo \" 720p[-16 OR -24] LCD 720P 1280x720\"\n" \
+ " echo \" sxga[-16 OR -24] LCD SXGA 1280x1024\"\n" \
+ " echo \" uxga[-16 OR -24] LCD UXGA 1600x1200\"\n" \
+ " echo \n " \
+ " echo \"Default `display` environment variable is now being set to: 15\"\n" \
+ " setenv display 15\n" \
+ " setenv preboot\n" \
+ " echo \n " \
+ " echo \"At the U-Boot prompt type commands: `setenv display <num>`, then type\"\n" \
+ " echo \"`saveenv` to save the environment to NAND flash. This will avoid seeing\"\n" \
+ " echo \"this notice on future boots\" \n " \
+ " echo =================================== NOTICE ===================================\n" \
+ " echo \n " \
+ "fi"
#ifdef CONFIG_USB_TTY
#define OMAP3LOGIC_USBTTY "usbtty=cdc_acm\0"
@@ -403,171 +432,153 @@
"nfsrootpath=/opt/nfs-exports/ltib-omap\0" \
"nfsoptions=,wsize=1500,rsize=1500\0" \
"rotation=0\0" \
- "autoboot=echo \"\n== Checking mmc1 for alternate boot script " CONFIG_MMC_BOOTSCRIPT_NAME " ==\";" \
+ "autoboot=run _autoboot\0_autoboot=echo \"\n== Checking mmc1 for alternate boot script " CONFIG_MMC_BOOTSCRIPT_NAME " ==\";" \
" if mmc init; then \n" \
- " if run loadbootscript; then \n" \
+ " if run _loadbootscript; then \n" \
" echo \"\"; \n" \
" echo \"== Found script on mmc 1, starting ==\"; \n" \
" run bootscript; \n" \
" else \n" \
" echo \"\"; \n" \
" echo \"== Script not found on mmc 1, proceeding with defaultboot ==\"; \n" \
- " run defaultboot;\n" \
+ " run _defaultboot;\n" \
" fi; \n" \
- " else run defaultboot; fi\0" \
- "loadbootscript=fatload mmc 1 $mmc_bootscript_addr " CONFIG_MMC_BOOTSCRIPT_NAME "\0" \
+ " else run _defaultboot; fi\0" \
+ "_loadbootscript=fatload mmc 1 $mmc_bootscript_addr " CONFIG_MMC_BOOTSCRIPT_NAME "\0" \
"bootscript=source ${mmc_bootscript_addr}\0" \
- "vrfb_arg=if itest ${rotation} -ne 0; then \n" \
- "setenv bootargs ${bootargs} omapfb.vrfb=y omapfb.rotate=${rotation}; \n" \
- "fi\0" \
+ "_vrfb_arg=if itest ${rotation} -ne 0; then \n" \
+ " setenv bootargs ${bootargs} omapfb.vrfb=y omapfb.rotate=${rotation}; \n" \
+ " fi\0" \
"dump_bootargs=echo \"\"; echo \"== Kernel bootargs ==\"; echo $bootargs; echo \"\"; \0" \
- "dump_boot_sources=echo \"kernel_location: $kernel_location, " \
+ "_dump_boot_sources=echo \"kernel_location: $kernel_location, " \
"rootfs_location: $rootfs_location, " \
"rootfs_type: $rootfs_type\"; " \
"echo \"\"; " \
"\0" \
- "load_kernel=if test $kernel_location = 'ram'; then \n" \
- " echo \"== kernel located at $loadaddr ==\"; \n" \
- " echo \"\"; \n" \
- " setenv bootm_arg1 ${loadaddr};\n" \
- " else \n" \
- " if test $kernel_location = 'nand'; then \n" \
- " echo \"== Loading kernel from nand to $loadaddr ==\"; \n" \
- " nand read.i $loadaddr $kernel_partition; \n" \
+ \
+ /* load_kernel_* targets */ \
+ "_load_kernel_ram=if true;then;\n" \
+ " echo \"== kernel located at $Loadaddr ==\n\"\n" \
+ " setenv bootm_arg1 ${loadaddr}\n" \
+ " fi\0" \
+ "_load_kernel_nand=if true;then;\n" \
+ " echo \"== Loading kernel from nand to $loadaddr ==\"; \n" \
+ " nand read.i $loadaddr $kernel_partition; \n" \
+ " echo \"\"; \n" \
+ " setenv bootm_arg1 ${loadaddr};\n" \
+ " fi\0" \
+ "_load_kernel_nand-part=if true;then;\n" \
+ " echo \"== Loading kernel from nand partition $kernel_partition to $loadaddr ==\"; \n" \
+ " nboot $loadaddr $kernel_partition; \n" \
+ " echo \"\"; \n" \
+ " setenv bootm_arg1 ${loadaddr};\n" \
+ " fi\0" \
+ "_load_kernel_mmc=if true;then;\n" \
+ " echo \"== Loading kernel file $kernelimage to $loadaddr ==\"; \n" \
+ " mmc init; \n" \
+ " fatload mmc 1 $loadaddr $kernelimage; \n" \
+ " echo \"\"; \n" \
+ " setenv bootm_arg1 ${loadaddr};\n" \
+ " fi\0" \
+ "_load_kernel_tftp=if true;then;\n" \
+ " echo \"== Loading kernel file $tftpdir$kernelimage to $loadaddr ==\"; \n" \
+ " tftpboot $loadaddr $tftpdir$kernelimage; \n" \
+ " echo \"\"; \n" \
+ " setenv bootm_arg1 ${loadaddr};\n" \
+ " fi\0" \
+ "_load_kernel=setenv bootm_arg1;if run _load_kernel_$kernel_location; then;else \n" \
+ " echo \"\033[31m== kernel_location must be set to ram, nand, mmc, or tftp!! ==\033[0m\"; \n" \
" echo \"\"; \n" \
- " setenv bootm_arg1 ${loadaddr};\n" \
- " else \n" \
- " if test $kernel_location = 'nand-part'; then \n" \
- " echo \"== Loading kernel from nand partition $kernel_partition to $loadaddr ==\"; \n" \
- " nboot $loadaddr $kernel_partition; \n" \
- " echo \"\"; \n" \
- " setenv bootm_arg1 ${loadaddr};\n" \
- " else \n" \
- " if test $kernel_location = 'mmc'; then \n" \
- " echo \"== Loading kernel file $kernelimage to $loadaddr ==\"; \n" \
- " mmc init; \n" \
- " fatload mmc 1 $loadaddr $kernelimage; \n" \
+ " fi\n\0" \
+ \
+ /* load_rootfs_* targets */ \
+ "_load_rootfs_ram=if true;then;\n" \
+ " echo \"== rootfs located at $ramdiskaddr ==\"; \n" \
" echo \"\"; \n" \
- " setenv bootm_arg1 ${loadaddr};\n" \
- " else \n" \
- " if test $kernel_location = 'tftp'; then \n" \
- " echo \"== Loading kernel file $tftpdir$kernelimage to $loadaddr ==\"; \n" \
- " tftpboot $loadaddr $tftpdir$kernelimage; \n" \
- " echo \"\"; \n" \
- " setenv bootm_arg1 ${loadaddr};\n" \
- " else \n" \
- " echo \"== kernel_location must be set to ram, nand, mmc, or tftp!! ==\"; \n" \
- " echo \"\"; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi\n " \
- "\0" \
- "load_rootfs=if test $rootfs_location = 'ram'; then \n" \
- " echo \"== rootfs located at $ramdiskaddr ==\"; \n" \
- " echo \"\"; \n" \
- " setenv bootm_arg2 ${ramdiskaddr}; \n" \
- " else \n" \
- " if test $rootfs_location = 'tftp'; then \n" \
- " echo \"== Loading rootfs file $tftpdir$ramdiskimage to $ramdiskaddr ==\"; \n" \
- " tftpboot $ramdiskaddr $tftpdir$ramdiskimage;\n" \
- " echo \"\"; \n" \
- " setenv bootm_arg2 ${ramdiskaddr}; \n" \
- " else \n" \
- " if test $rootfs_location = '/dev'; then \n" \
- " echo \"== rootfs located in $rootfs_device ==\"; \n" \
- " echo \"\"; \n" \
- " setenv bootargs ${bootargs} root=${rootfs_device}; \n" \
- " setenv bootm_arg2; \n" \
- " else \n" \
- " if test $rootfs_location = 'nfs'; then \n" \
+ " setenv bootm_arg2 ${ramdiskaddr}; \n" \
+ " fi\0" \
+ "_load_rootfs_tftp=if true;then;\n" \
+ " echo \"== Loading rootfs file $tftpdir$ramdiskimage to $ramdiskaddr ==\"; \n" \
+ " tftpboot $ramdiskaddr $tftpdir$ramdiskimage;\n" \
+ " echo \"\"; \n" \
+ " setenv bootm_arg2 ${ramdiskaddr}; \n" \
+ " fi\0" \
+ "_load_rootfs_/dev=if true;then;\n" \
+ " echo \"== rootfs located in $rootfs_device ==\"; \n" \
+ " echo \"\"; \n" \
+ " setenv bootargs ${bootargs} root=${rootfs_device}; \n" \
+ " fi\0" \
+ "_load_rootfs_nfs=if true;then;\n" \
" echo \"== rootfs located at $nfsrootpath on server $serverip ==\"; \n" \
" echo \"\"; \n" \
" setenv bootargs ${bootargs} root=/dev/nfs; \n" \
- " setenv bootm_arg2; \n" \
- " else \n" \
- " if test $rootfs_location = 'mmc'; then\n " \
- " echo \"== Loading rootfs file $ramdiskimage to $ramdiskaddr ==\"; \n" \
- " fatload mmc 1 ${ramdiskaddr} ${ramdiskimage}; \n"\
- " setenv bootm_arg2 ${ramdiskaddr}; \n" \
- " else \n" \
- " if test $rootfs_location = 'nand'; then \n" \
- " echo \"== Loading rootfs from nand to $ramdiskaddr ==\"; \n" \
- " nand read.i $ramdiskaddr $ramdisk_partition; \n" \
- " setenv bootm_arg2 ${ramdiskaddr}; \n" \
- " else \n"\
- " if test $rootfs_location = 'nand-part'; then \n" \
+ " fi\0" \
+ "_load_rootfs_mmc=if true;then;\n" \
+ " echo \"== Loading rootfs file $ramdiskimage to $ramdiskaddr ==\"; \n" \
+ " fatload mmc 1 ${ramdiskaddr} ${ramdiskimage}; \n"\
+ " setenv bootm_arg2 ${ramdiskaddr}; \n" \
+ " fi\0" \
+ "_load_rootfs_nand=if true;then;\n" \
+ " echo \"== Loading rootfs from nand to $ramdiskaddr ==\"; \n" \
+ " nand read.i $ramdiskaddr $ramdisk_partition; \n" \
+ " setenv bootm_arg2 ${ramdiskaddr}; \n" \
+ " fi\0" \
+ "_load_rootfs_nand-part=if true;then;\n" \
" echo \"== Loading rootfs from nand partition $ramdisk_partition to $ramdiskaddr ==\"; \n" \
" nand read.i $ramdiskaddr $ramdisk_partition; \n" \
" setenv bootm_arg2 ${ramdiskaddr}; \n" \
- " else \n"\
- " echo \"== rootfs_location must be set to ram, tftp, /dev, nfs, mmc, nand-part or nand!! == \"; \n" \
- " echo \"\"; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi" \
- "\0" \
- "set_rootfs_type=if test $rootfs_type = 'ramdisk'; then \n" \
- " setenv bootargs ${bootargs} root=/dev/ram rw ramdisk_size=${ramdisksize}; \n" \
- " else \n" \
- " if test $rootfs_type = 'jffs'; then \n" \
- " setenv bootargs ${bootargs} rw rootfstype=jffs2;\n" \
- " else \n" \
- " if test $rootfs_type = 'yaffs'; then \n" \
- " setenv bootargs ${bootargs} rw rootfstype=yaffs2;\n" \
- " else \n" \
- " if test $rootfs_type = 'ext3'; then \n" \
- " setenv bootargs ${bootargs} rw rootfstype=ext3 rootwait; \n" \
- " else \n" \
- " if test $rootfs_type = 'nfs'; then \n" \
- " setenv bootargs ${bootargs} rw nfsroot=${serverip}:${nfsrootpath}${nfsoptions} ip=dhcp; \n" \
- " else \n"\
- " echo \"$rootfs_type must be set to ramdisk, jffs, yaffs, ext3, or nfs\"; \n" \
- " echo \"\"; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi; \n" \
- " fi" \
- "\0" \
- "addmtdparts=setenv bootargs ${bootargs} ${mtdparts} \0" \
- "common_bootargs=" \
- " setenv bootargs ${bootargs} display=${display} ${otherbootargs}; " \
- " run addmtdparts; " \
- " run vrfb_arg; " \
- "\0" \
- "dump_run_bootm=" \
- " echo \"bootm $bootm_arg1 $bootm_arg2\"; " \
- " echo \"\"; " \
- " bootm $bootm_arg1 $bootm_arg2\0" \
- "defaultboot=" \
- " run dump_boot_sources; " \
- " run setconsole; setenv bootargs console=${console}; " \
- " run common_bootargs; " \
- " run load_kernel; " \
- " run load_rootfs; " \
- " run set_rootfs_type; " \
- " run dump_bootargs; " \
- " run dump_run_bootm; " \
- "\0" \
- "nfsboot=" \
- " setenv kernel_location tftp; " \
- " setenv rootfs_location nfs; " \
- " setenv rootfs_type nfs; " \
- " run defaultboot; " \
- "\0" \
- "ramboot=" \
- " setenv kernel_location tftp; " \
- " setenv rootfs_location tftp; " \
- " setenv rootfs_type ramdisk; " \
- " run defaultboot; " \
- "\0" \
- "checkerror=if test $error = '';\n" \
+ " fi\0" \
+ "_load_rootfs=setenv bootm_arg2;if run _load_rootfs_$rootfs_location; then;else \n" \
+ " echo \"\033[31m== rootfs_location must be set to ram, tftp, /dev, nfs, mmc, nand-part or nand!! == \033[0m\"; \n" \
+ " echo \"\"; \n" \
+ " fi\n\0" \
+ \
+ /* set_rootfs_type_* targets */ \
+ "_set_rootfs_type_ramdisk=setenv bootargs ${bootargs} root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
+ "_set_rootfs_type_jffs=setenv bootargs ${bootargs} rw rootfstype=jffs2\0" \
+ "_set_rootfs_type_yaffs=setenv bootargs ${bootargs} rw rootfstype=yaffs2\0" \
+ "_set_rootfs_type_ext3=setenv bootargs ${bootargs} rw rootfstype=ext3 rootwait\0" \
+ "_set_rootfs_type_nfs=setenv bootargs ${bootargs} rw nfsroot=${serverip}:${nfsrootpath}${nfsoptions} ip=dhcp\0" \
+ "_set_rootfs_type=if run _set_rootfs_type_${rootfs_type}; then;else \n" \
+ " echo \"\033[31m== $rootfs_type must be set to ramdisk, jffs, yaffs, ext3, or nfs ==\033[0m\"; \n" \
+ " echo \"\"; \n" \
+ " fi\0" \
+ \
+ /* Other misc. scripts */ \
+ "_addmtdparts=setenv bootargs ${bootargs} ${mtdparts} \0" \
+ "_common_bootargs=if true;then;\n" \
+ " setenv bootargs ${bootargs} display=${display} ${otherbootargs};\n" \
+ " run _addmtdparts;\n" \
+ " run _vrfb_arg;\n" \
+ " fi\0" \
+ "_dump_run_bootm=if true;then\n" \
+ " echo \"bootm $bootm_arg1 $bootm_arg2\";\n" \
+ " echo \"\";\n" \
+ " bootm $bootm_arg1 $bootm_arg2\n" \
+ " fi\0" \
+ "defaultboot=run _defaultboot\0_defaultboot=if true;then\n" \
+ " run _dump_boot_sources;\n" \
+ " run setconsole; setenv bootargs console=${console};\n" \
+ " run _common_bootargs;\n" \
+ " run _load_kernel;\n" \
+ " run _load_rootfs;\n" \
+ " run _set_rootfs_type;\n" \
+ " run dump_bootargs;\n" \
+ " run _dump_run_bootm;\n" \
+ " fi\0" \
+ "nfsboot=if true;then\n" \
+ " setenv kernel_location tftp\n" \
+ " setenv rootfs_location nfs\n" \
+ " setenv rootfs_type nfs\n" \
+ " run defaultboot\n" \
+ " fi\0" \
+ "ramboot=if true;then\n" \
+ " setenv kernel_location tftp\n" \
+ " setenv rootfs_location tftp\n" \
+ " setenv rootfs_type ramdisk\n" \
+ " run defaultboot\n" \
+ " fi\0" \
+ "_checkerror=if test $error = '';\n" \
" then\n" \
" echo \033[31m${error}\033[0m\n" \
" echo_lcd /pAA/k${error}\n" \
@@ -578,19 +589,19 @@
" echo_lcd /kand restart the devkit./n\n" \
" fi" \
"\0" \
- "initmmc=if test $error = '';then;else\n" \
+ "_initmmc=if test $error = '';then;else\n" \
" if mmc init;then;else;\n" \
" setenv error \"Failed to initialize MMC\"\n" \
" fi\n" \
" fi" \
"\0" \
- "checkmmcfile=if test $error = '';then;else\n" \
+ "_checkmmcfile=if test $error = '';then;else\n" \
" if fatload mmc 1 ${loadaddr} ${arg_filename} 1;then;else;\n" \
" setenv error \"Unable to load ${arg_filename}\";\n" \
" fi\n" \
" fi" \
"\0" \
- "burnfile=if test $error = '';then;else\n" \
+ "_burnfile=if test $error = '';then;else\n" \
" echo \"\033[1m== Loading ${arg_filename} ==\033[0m\"\n" \
" echo_lcd /pAA/kPartition ${arg_partition}:\n" \
" echo_lcd /pBA/kLoading ${arg_filename}/aC;lcd_percent \"/gC/k /P%...\"\n" \
@@ -599,7 +610,7 @@
" lcd_percent \"/pBA/kErasing Partition /P%...\"\n" \
" nand erase.part ${arg_partition}\n" \
" echo_lcd /pBA/kWriting ${arg_filename} to Partition/aC;lcd_percent \"/gC/k /P%...\"\n" \
- " nand ${arg_writecmd} ${loadaddr} ${arg_partition} ${filesize}\n" \
+ " nand write.auto ${loadaddr} ${arg_partition} ${filesize}\n" \
" lcd_percent \"\"\n" \
" echo_lcd /pAA/k/pAB/k\n" \
" else\n" \
@@ -607,51 +618,36 @@
" fi\n" \
" fi" \
"\0" \
- "burnmmcxloader=if test $error = '';then;else\n" \
- " nandecc hw;\n" \
- " arg_filename=${xloadimage};arg_partition=${xloader_partition};arg_writecmd=write.i;\n" \
- " run burnfile\n" \
- " if test $error = '';then;else\n" \
- " nand write.i ${loadaddr} 0x00020000 ${filesize}\n" \
- " nand write.i ${loadaddr} 0x00040000 ${filesize}\n" \
- " nand write.i ${loadaddr} 0x00060000 ${filesize}\n" \
- " fi\n" \
- " fi" \
- "\0" \
- "burncommon=if test $error = '';then;else\n" \
- " arg_filename=${xloadimage};run checkmmcfile;\n" \
- " arg_filename=${ubootimage};run checkmmcfile;\n" \
- " arg_filename=${kernelimage};run checkmmcfile;\n" \
- " run burnmmcxloader;\n" \
- " nandecc ${defaultecc};\n" \
- " arg_writecmd=write.i;\n" \
- " arg_filename=${ubootimage};arg_partition=${uboot_partition};run burnfile;\n" \
- " arg_filename=${kernelimage};arg_partition=${kernel_partition};run burnfile;\n" \
+ "_burncommon=if test $error = '';then;else\n" \
+ " arg_filename=${xloadimage};run _checkmmcfile;\n" \
+ " arg_filename=${ubootimage};run _checkmmcfile;\n" \
+ " arg_filename=${kernelimage};run _checkmmcfile;\n" \
+ " arg_filename=${xloadimage};arg_partition=${xloader_partition};run _burnfile;\n" \
+ " arg_filename=${ubootimage};arg_partition=${uboot_partition};run _burnfile;\n" \
+ " arg_filename=${kernelimage};arg_partition=${kernel_partition};run _burnfile;\n" \
" fi" \
"\0" \
- "makenandboot=if true;then;\n" \
+ "makenandboot=run _makenandboot\0_makenandboot=if true;then;\n" \
" setenv error;\n" \
- " run initmmc;\n" \
- " arg_filename=${ramdiskimage};run checkmmcfile;\n" \
- " run burncommon;\n" \
- " arg_filename=${ramdiskimage};arg_partition=${ramdisk_partition};arg_writecmd=write.i;\n" \
- " run burnfile;\n" \
+ " run _initmmc;\n" \
+ " arg_filename=${ramdiskimage};run _checkmmcfile;\n" \
+ " run _burncommon;\n" \
+ " arg_filename=${ramdiskimage};arg_partition=${ramdisk_partition};run _burnfile;\n" \
" if test $error = '';then;else\n" \
" setenv kernel_location nand-part\n" \
" setenv rootfs_location nand-part\n" \
" setenv rootfs_type ramdisk\n" \
" saveenv\n" \
" fi\n" \
- " run checkerror;\n" \
+ " run _checkerror;\n" \
" fi" \
"\0" \
- "makeyaffsboot=if true;then;\n" \
+ "makeyaffsboot=run _makeyaffsboot\0_makeyaffsboot=if true;then;\n" \
" setenv error;\n" \
- " run initmmc;\n" \
- " arg_filename=${yaffsimage};run checkmmcfile;\n" \
- " run burncommon;\n" \
- " arg_filename=${yaffsimage};arg_partition=${yaffs_partition};arg_writecmd=write.yaffs;\n" \
- " run burnfile;\n" \
+ " run _initmmc;\n" \
+ " arg_filename=${yaffsimage};run _checkmmcfile;\n" \
+ " run _burncommon;\n" \
+ " arg_filename=${yaffsimage};arg_partition=${yaffs_partition};run _burnfile\n" \
" if test $error = '';then;else\n" \
" setenv kernel_location nand-part\n" \
" setenv rootfs_location /dev\n" \
@@ -659,7 +655,7 @@
" setenv rootfs_device /dev/mtdblock5\n" \
" saveenv\n" \
" fi\n" \
- " run checkerror;\n" \
+ " run _checkerror;\n" \
" fi" \
"\0"
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-17 10:17:40 +0000