diff options
Diffstat (limited to 'include/configs/nhk8815.h')
| -rw-r--r-- | include/configs/nhk8815.h | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h deleted file mode 100644 index dd70adccea..0000000000 --- a/include/configs/nhk8815.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2005 - * STMicroelectronics. - * Configuration settings for the "Nomadik Hardware Kit" NHK-8815, - * the evaluation board for the Nomadik 8815 System on Chip. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <nomadik.h> - -#define CONFIG_NOMADIK_8815 /* cpu variant */ - -#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ - -/* commands */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_SYS_NO_FLASH -/* There is NAND storage */ -#define CONFIG_NAND_NOMADIK -#define CONFIG_CMD_JFFS2 - -/* user interface */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LOAD_ADDR 0x800000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* boot config */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG -#define CONFIG_BOOTDELAY 1 -#define CONFIG_BOOTARGS "root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc" -#define CONFIG_BOOTCOMMAND "fsload 0x100000 kernel.uimg;" \ - " fsload 0x800000 initrd.gz.uimg;" \ - " bootm 0x100000 0x800000" - -/* memory-related information */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0x08000000 /* SDR-SDRAM BANK #2*/ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) -/* The IPL loads us at 0, tell so to u-boot. Put stack pointer 1M into RAM */ -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20)) - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) - -#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ - -/* timing informazion */ -#define CONFIG_SYS_TIMERBASE 0x101E2000 - -/* serial port (PL011) configuration */ -#define CONFIG_PL011_SERIAL -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CFG_SERIAL0 0x101FD000 -#define CFG_SERIAL1 0x101FB000 - -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } -#define CONFIG_PL011_CLOCK 48000000 - -/* i2c, for the port extenders (uses gpio.c in board directory) */ -#ifndef __ASSEMBLY__ -#include <asm/arch/gpio.h> -#define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT 1 /* I2C bit-banged */ -#define I2C_SOFT_DEFS -#define CONFIG_SYS_I2C_SOFT_SPEED 400000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define __SDA 63 -#define __SCL 62 -#define I2C_SDA(x) nmk_gpio_set(__SDA, x) -#define I2C_SCL(x) nmk_gpio_set(__SCL, x) -#define I2C_READ (nmk_gpio_get(__SDA)!=0) -#define I2C_ACTIVE nmk_gpio_dir(__SDA, 1) -#define I2C_TRISTATE nmk_gpio_dir(__SDA, 0) -#define I2C_DELAY (udelay(2)) -#endif /* __ASSEMBLY__ */ - -/* Ethernet */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_IO_VADDR 0xee000000 -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) -#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) - -#define CONFIG_SMC91111 /* Using SMC91c111*/ -#define CONFIG_SMC91111_BASE 0x34000300 -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC_USE_32_BIT -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_IP_DEFRAG /* Allows faster download, TFTP and NFS */ -#define CONFIG_TFTP_BLOCKSIZE 4096 -#define CONFIG_NFS_READ_SIZE 4096 - -/* Storage information: onenand and nand */ -#define CONFIG_CMD_ONENAND -#define CONFIG_MTD_ONENAND_VERIFY_WRITE -#define CONFIG_SYS_ONENAND_BASE 0x30000000 - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 /* SMPS0n */ - -/* - * Filesystem information - * - * Since U-Boot has been loaded to RAM by vendor code, we could use - * either or both OneNand and Nand. However, we need to know where the - * filesystem lives. Comments below report vendor-selected partitions - */ -#ifdef CONFIG_BOOT_ONENAND - /* Partition Size Start - * XloaderTOC + X-Loader 256KB 0x00000000 - * Memory init function 256KB 0x00040000 - * U-Boot + env 2MB 0x00080000 - * Sysimage (kernel + ramdisk) 4MB 0x00280000 - * JFFS2 Root filesystem 22MB 0x00680000 - * JFFS2 User Data 227.5MB 0x01C80000 - */ -# define CONFIG_JFFS2_DEV "onenand0" -# define CONFIG_JFFS2_PART_SIZE 0x01600000 -# define CONFIG_JFFS2_PART_OFFSET 0x00680000 -# define CONFIG_ENV_IS_IN_ONENAND -# define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ -# define CONFIG_ENV_ADDR (0x00280000 - CONFIG_ENV_SIZE) - -#else /* BOOT_NAND */ - /* Partition Size Start - * XloaderTOC + X-Loader 256KB 0x00000000 - * Memory init function 256KB 0x00040000 - * U-Boot + env 2MB 0x00080000 - * Kernel Image 3MB 0x00280000 - * JFFS2 Root filesystem 22MB 0x00580000 - * JFFS2 User Data 100.5MB 0x01b80000 - */ -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_NAND 1 /* For the jffs2 support*/ -# define CONFIG_JFFS2_PART_SIZE 0x01600000 -# define CONFIG_JFFS2_PART_OFFSET 0x00580000 -# define CONFIG_ENV_IS_IN_NAND -# define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ -# define CONFIG_ENV_OFFSET (0x00280000 - CONFIG_ENV_SIZE) - -#endif /* CONFIG_BOOT_ONENAND */ - -/* this is needed to make hello_world.c and other stuff happy */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#endif /* __CONFIG_H */ |