summaryrefslogtreecommitdiff
path: root/include/configs/io64.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/io64.h')
-rw-r--r--include/configs/io64.h533
1 files changed, 0 insertions, 533 deletions
diff --git a/include/configs/io64.h b/include/configs/io64.h
deleted file mode 100644
index 1b58f04540..0000000000
--- a/include/configs/io64.h
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * (C) Copyright 2011
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * based on kilauea.h
- * by Stefan Roese, DENX Software Engineering, sr@denx.de.
- * and Grant Erickson <gerickson@nuovations.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************************************
- * io64.h - configuration for Guntermann & Drunck Io64 (405EX)
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_IO64 1 /* Board is Io64 */
-#define CONFIG_405EX 1 /* Specifc 405EX support*/
-#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
-#endif
-
-/*
- * CHIP_21 errata
- */
-#define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY
-
-/*
- * Include common defines/options for all AMCC eval boards
- */
-#define CONFIG_HOSTNAME io64
-#include "amcc-common.h"
-
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0xFC000000
-#define CONFIG_SYS_NVRAM_BASE 0xF0000000
-#define CONFIG_SYS_FPGA0_BASE 0xF0100000
-#define CONFIG_SYS_FPGA1_BASE 0xF0108000
-#define CONFIG_SYS_LATCH_BASE 0xF0200000
-
-/*-----------------------------------------------------------------------
- * Initial RAM & Stack Pointer Configuration Options
- *
- * There are traditionally three options for the primordial
- * (i.e. initial) stack usage on the 405-series:
- *
- * 1) On-chip Memory (OCM) (i.e. SRAM)
- * 2) Data cache
- * 3) SDRAM
- *
- * For the 405EX(r), there is no OCM, so we are left with (2) or (3)
- * the latter of which is less than desireable since it requires
- * setting up the SDRAM and ECC in assembly code.
- *
- * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
- * select on the External Bus Controller (EBC) and then select a
- * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
- * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
- * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
- * physical SDRAM to use (3).
- *-----------------------------------------------------------------------*/
-
-#define CONFIG_SYS_INIT_DCACHE_CS 4
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
-#define CONFIG_SYS_INIT_RAM_ADDR \
- (CONFIG_SYS_SDRAM_BASE + (1 << 30)) /* 1 GiB */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR \
- (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-#define CONFIG_SYS_INIT_RAM_SIZE \
- (4 << 10) /* 4 KiB */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * If the data cache is being used for the primordial stack and global
- * data area, the POST word must be placed somewhere else. The General
- * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
- * its compare and mask register contents across reset, so it is used
- * for the POST word.
- */
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
-# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-# define CONFIG_SYS_POST_WORD_ADDR \
- (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
-#else
-# define CONFIG_SYS_INIT_EXTRA_SIZE 16
-# define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
-# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-#define CONFIG_SYS_BASE_BAUD 691200
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/* Gbit PHYs */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-#define CONFIG_BITBANGMII_MULTI
-
-#define CONFIG_SYS_MDIO_PIN (0x80000000 >> 12) /* MDIO is GPIO12 */
-#define CONFIG_SYS_MDC_PIN (0x80000000 >> 13) /* MDC is GPIO13 */
-
-#define CONFIG_SYS_GBIT_MII_BUSNAME "io_miiphy0"
-
-#define CONFIG_SYS_MDIO1_PIN (0x80000000 >> 2) /* MDIO is GPIO2 */
-#define CONFIG_SYS_MDC1_PIN (0x80000000 >> 3) /* MDC is GPIO3 */
-
-#define CONFIG_SYS_GBIT_MII1_BUSNAME "io_miiphy1"
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MBYTES_SDRAM (128) /* 128MB */
-
-/*
- * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
- *
- * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
- * SDRAM Controller DDR autocalibration values and takes a lot longer
- * to run than Method_B.
- * (See the Method_A and Method_B algorithm discription in the file:
- * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
- * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
- *
- * DDR Autocalibration Method_B is the default.
- */
-#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION
-#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION
-#undef CONFIG_PPC4xx_DDR_METHOD_A
-
-#define CONFIG_SYS_SDRAM0_MB0CF_BASE ((0 << 20) + CONFIG_SYS_SDRAM_BASE)
-
-/* DDR1/2 SDRAM Device Control Register Data Values */
-#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \
- SDRAM_RXBAS_SDSZ_128MB | \
- SDRAM_RXBAS_SDAM_MODE2 | \
- SDRAM_RXBAS_SDBE_ENABLE)
-#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
-#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
-#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
-#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \
- SDRAM_MCOPT1_4_BANKS | \
- SDRAM_MCOPT1_DDR2_TYPE | \
- SDRAM_MCOPT1_QDEP | \
- SDRAM_MCOPT1_DCOO_DISABLED)
-#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
-#define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \
- SDRAM_MODT_EB0R_ENABLE)
-#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
-#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \
- SDRAM_CODT_CKLZ_36OHM | \
- SDRAM_CODT_DQS_1_8_V_DDR2 | \
- SDRAM_CODT_IO_NMODE)
-#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560)
-#define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(80) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
-#define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(3) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
-#define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
-#define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \
- SDRAM_INITPLR_IMA_ENCODE(0))
-#define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
- JEDEC_MA_EMR_RTT_75OHM))
-#define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
- JEDEC_MA_MR_CL_DDR2_5_0_CLK | \
- JEDEC_MA_MR_BLEN_4 | \
- JEDEC_MA_MR_DLL_RESET))
-#define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(3) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
- SDRAM_INITPLR_IBA_ENCODE(0x0) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
-#define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(26) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(26) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(26) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(26) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
- JEDEC_MA_MR_CL_DDR2_5_0_CLK | \
- JEDEC_MA_MR_BLEN_4))
-#define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
- JEDEC_MA_EMR_RDQS_DISABLE | \
- JEDEC_MA_EMR_DQS_DISABLE | \
- JEDEC_MA_EMR_RTT_DISABLED | \
- JEDEC_MA_EMR_ODS_NORMAL))
-#define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \
- SDRAM_INITPLR_IMWT_ENCODE(2) | \
- SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
- SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
- SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
- JEDEC_MA_EMR_RDQS_DISABLE | \
- JEDEC_MA_EMR_DQS_DISABLE | \
- JEDEC_MA_EMR_RTT_DISABLED | \
- JEDEC_MA_EMR_ODS_NORMAL))
-#define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE)
-#define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE)
-#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \
- SDRAM_RQDC_RQFD_ENCODE(56))
-#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521)
-#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2)
-#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \
- SDRAM_DLCR_DLCS_CONT_DONE | \
- SDRAM_DLCR_DLCV_ENCODE(165))
-#define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV)
-#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
-#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
- SDRAM_SDTR1_RTW_2_CLK | \
- SDRAM_SDTR1_WTWO_1_CLK | \
- SDRAM_SDTR1_RTRO_1_CLK)
-#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \
- SDRAM_SDTR2_WTR_2_CLK | \
- SDRAM_SDTR2_XSNR_32_CLK | \
- SDRAM_SDTR2_WPC_4_CLK | \
- SDRAM_SDTR2_RPC_2_CLK | \
- SDRAM_SDTR2_RP_3_CLK | \
- SDRAM_SDTR2_RRD_2_CLK)
-#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(9) | \
- SDRAM_SDTR3_RC_ENCODE(12) | \
- SDRAM_SDTR3_XCS | \
- SDRAM_SDTR3_RFC_ENCODE(21))
-#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
- SDRAM_MMODE_DCL_DDR2_5_0_CLK | \
- SDRAM_MMODE_BLEN_4)
-#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \
- SDRAM_MEMODE_RTT_75OHM)
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-
-#define CONFIG_PCA9698 1 /* NXP PCA9698 */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* I2C bootstrap EEPROM */
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x54
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
-#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
-
-/*-----------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-#define CONFIG_M88E1111_PHY 1
-#define CONFIG_IBM_EMAC4_V4 1
-#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII
-#define CONFIG_PHY_ADDR 0x12 /* PHY address, See schematics */
-
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
-#define CONFIG_HAS_ETH0 1
-
-#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
-#define CONFIG_PHY1_ADDR 0x13
-
-/* Debug messages for the DDR autocalibration */
-#define CONFIG_AUTOCALIB "silent\0"
-
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_AMCC_DEF_ENV \
- CONFIG_AMCC_DEF_ENV_POWERPC \
- CONFIG_AMCC_DEF_ENV_PPC_OLD \
- CONFIG_AMCC_DEF_ENV_NOR_UPD \
- "logversion=2\0" \
- "kernel_addr=fc000000\0" \
- "fdt_addr=fc1e0000\0" \
- "ramdisk_addr=fc200000\0" \
- "pciconfighost=1\0" \
- "pcie_mode=RP:RP\0" \
- ""
-
-/*
- * Commands additional to the ones defined in amcc-common.h
- */
-
-#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY
-
-/* POST support */
-#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
- CONFIG_SYS_POST_CPU | \
- CONFIG_SYS_POST_ETHER | \
- CONFIG_SYS_POST_I2C | \
- CONFIG_SYS_POST_MEMORY_ON | \
- CONFIG_SYS_POST_UART)
-
-/* Define here the base-addresses of the UARTs to test in POST */
-#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
- CONFIG_SYS_NS16550_COM2 }
-
-#define CONFIG_LOGBUFFER
-#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- *----------------------------------------------------------------------*/
-
-/* Memory Bank 0 (NOR-flash) */
-#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(11) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(0) | \
- EBC_BXAP_WBN_ENCODE(1) | \
- EBC_BXAP_WBF_ENCODE(2) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
- EBC_BXCR_BS_64MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-
-/* Memory Bank 1 (NVRAM/Uart) */
-#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_ENABLED | \
- EBC_BXAP_FWT_ENCODE(8) | \
- EBC_BXAP_BWT_ENCODE(4) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(1) | \
- EBC_BXAP_WBN_ENCODE(1) | \
- EBC_BXAP_WBF_ENCODE(1) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_NVRAM_BASE) | \
- EBC_BXCR_BS_1MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_8BIT)
-
-/* Memory Bank 2 (FPGA) */
-#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(5) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(2) | \
- EBC_BXAP_WBN_ENCODE(1) | \
- EBC_BXAP_WBF_ENCODE(1) | \
- EBC_BXAP_TH_ENCODE(0) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA0_BASE) | \
- EBC_BXCR_BS_1MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-
-/* Memory Bank 3 (Latches) */
-#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_ENABLED | \
- EBC_BXAP_FWT_ENCODE(8) | \
- EBC_BXAP_BWT_ENCODE(4) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(1) | \
- EBC_BXAP_WBN_ENCODE(1) | \
- EBC_BXAP_WBF_ENCODE(1) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_LATCH_BASE) | \
- EBC_BXCR_BS_1MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-
-/* EBC peripherals */
-
-#define CONFIG_SYS_FPGA_BASE(k) \
- (k ? CONFIG_SYS_FPGA1_BASE : CONFIG_SYS_FPGA0_BASE)
-
-#define CONFIG_SYS_FPGA_DONE(k) \
- (k ? 0x0040 : 0x0080)
-
-#define CONFIG_SYS_FPGA_COUNT 2
-
-#define CONFIG_SYS_FPGA_PTR { \
- (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
- (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
-
-#define CONFIG_SYS_FPGA_COMMON
-
-#define CONFIG_SYS_LATCH0_RESET 0xffff
-#define CONFIG_SYS_LATCH0_BOOT 0xffff
-#define CONFIG_SYS_LATCH1_RESET 0xffbf
-#define CONFIG_SYS_LATCH1_BOOT 0xffff
-
-/*-----------------------------------------------------------------------
- * GPIO Setup
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO */ \
-{ \
-/* GPIO Core 0 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO0 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO3 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO6 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO8 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO9 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO10 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO11 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO12 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO13 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO14 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO15 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO16 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO17 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO18 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO19 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO20 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO21 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO22 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO23 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO24 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_0 }, /* GPIO25 */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO26 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO27 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO28 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO29 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO30 */ \
-{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO31 */ \
-} \
-}
-
-#define CONFIG_SYS_GPIO_STARTUP_FINISHED 15
-#define CONFIG_SYS_GPIO_STARTUP_FINISHED_N 14
-
-#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 07:36:22 +0000