summaryrefslogtreecommitdiff
path: root/include/configs/cradle.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/cradle.h')
-rw-r--r--include/configs/cradle.h128
1 files changed, 64 insertions, 64 deletions
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 34a265d5d7a..e80504a09ff 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -40,8 +40,8 @@
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
@@ -89,25 +89,25 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0xa2000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
@@ -137,20 +137,20 @@
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x04000000
+#define CONFIG_SYS_DRAM_BASE 0xa0000000
+#define CONFIG_SYS_DRAM_SIZE 0x04000000
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/*
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0x00020000 /* absolute address for now */
@@ -254,38 +254,38 @@
*/
/* Pin direction control */
/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */
-#define CFG_GPDR0_VAL 0xfff3bf02
-#define CFG_GPDR1_VAL 0xfbffbf83
-#define CFG_GPDR2_VAL 0x0001ffff
+#define CONFIG_SYS_GPDR0_VAL 0xfff3bf02
+#define CONFIG_SYS_GPDR1_VAL 0xfbffbf83
+#define CONFIG_SYS_GPDR2_VAL 0x0001ffff
/* Set and Clear registers */
-#define CFG_GPSR0_VAL 0x00400800
-#define CFG_GPSR1_VAL 0x00000480
-#define CFG_GPSR2_VAL 0x00014000
-#define CFG_GPCR0_VAL 0x00000000
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
+#define CONFIG_SYS_GPSR0_VAL 0x00400800
+#define CONFIG_SYS_GPSR1_VAL 0x00000480
+#define CONFIG_SYS_GPSR2_VAL 0x00014000
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x00000000
+#define CONFIG_SYS_GPCR2_VAL 0x00000000
/* Edge detect registers (these are set by the kernel) */
-#define CFG_GRER0_VAL 0x00000000
-#define CFG_GRER1_VAL 0x00000000
-#define CFG_GRER2_VAL 0x00000000
-#define CFG_GFER0_VAL 0x00000000
-#define CFG_GFER1_VAL 0x00000000
-#define CFG_GFER2_VAL 0x00000000
+#define CONFIG_SYS_GRER0_VAL 0x00000000
+#define CONFIG_SYS_GRER1_VAL 0x00000000
+#define CONFIG_SYS_GRER2_VAL 0x00000000
+#define CONFIG_SYS_GFER0_VAL 0x00000000
+#define CONFIG_SYS_GFER1_VAL 0x00000000
+#define CONFIG_SYS_GFER2_VAL 0x00000000
/* Alternate function registers */
-#define CFG_GAFR0_L_VAL 0x00000000
-#define CFG_GAFR0_U_VAL 0x00000010
-#define CFG_GAFR1_L_VAL 0x900a9550
-#define CFG_GAFR1_U_VAL 0x00000008
-#define CFG_GAFR2_L_VAL 0x20000000
-#define CFG_GAFR2_U_VAL 0x00000002
+#define CONFIG_SYS_GAFR0_L_VAL 0x00000000
+#define CONFIG_SYS_GAFR0_U_VAL 0x00000010
+#define CONFIG_SYS_GAFR1_L_VAL 0x900a9550
+#define CONFIG_SYS_GAFR1_U_VAL 0x00000008
+#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
+#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
/*
* Clocks, power control and interrupts
*/
-#define CFG_PSSR_VAL 0x00000020
-#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
-#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
-#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_PSSR_VAL 0x00000020
+#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
+#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
+#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */
/* FIXME
*
@@ -300,30 +300,30 @@
* FIXME Can ethernet be burst read and/or write?? This is set for lubbock
* Verify timings on all
*/
-#define CFG_MSC0_VAL 0x000023FA /* flash bank (cs0) */
-/*#define CFG_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */
-#define CFG_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */
-#define CFG_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */
+#define CONFIG_SYS_MSC0_VAL 0x000023FA /* flash bank (cs0) */
+/*#define CONFIG_SYS_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */
+#define CONFIG_SYS_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */
+#define CONFIG_SYS_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */
#ifdef REDBOOT_WAY
-#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
-#define CFG_MDMRS_VAL 0x00000000
-#define CFG_MDREFR_VAL 0x00018018
+#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
+#define CONFIG_SYS_MDMRS_VAL 0x00000000
+#define CONFIG_SYS_MDREFR_VAL 0x00018018
#else
-#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
-#define CFG_MDMRS_VAL 0x00000000
-#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */
+#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
+#define CONFIG_SYS_MDMRS_VAL 0x00000000
+#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */
#endif
/*
* PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
*/
-#define CFG_MECR_VAL 0x00000000
-#define CFG_MCMEM0_VAL 0x00010504
-#define CFG_MCMEM1_VAL 0x00010504
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00010504
-#define CFG_MCIO0_VAL 0x00004715
-#define CFG_MCIO1_VAL 0x00004715
+#define CONFIG_SYS_MECR_VAL 0x00000000
+#define CONFIG_SYS_MCMEM0_VAL 0x00010504
+#define CONFIG_SYS_MCMEM1_VAL 0x00010504
+#define CONFIG_SYS_MCATT0_VAL 0x00010504
+#define CONFIG_SYS_MCATT1_VAL 0x00010504
+#define CONFIG_SYS_MCIO0_VAL 0x00004715
+#define CONFIG_SYS_MCIO1_VAL 0x00004715
/* Board specific defines */