diff options
Diffstat (limited to 'include/configs/corenet_ds.h')
-rw-r--r-- | include/configs/corenet_ds.h | 49 |
1 files changed, 5 insertions, 44 deletions
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c877f3c725e..79fca968dc0 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -25,16 +25,6 @@ #else #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg -#if defined(CONFIG_TARGET_P3041DS) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg -#elif defined(CONFIG_TARGET_P4080DS) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg -#elif defined(CONFIG_TARGET_P5020DS) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg -#elif defined(CONFIG_TARGET_P5040DS) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg -#endif #endif #endif @@ -73,9 +63,7 @@ #define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -101,11 +89,8 @@ #endif /* EEPROM */ -#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * DDR Setup @@ -117,8 +102,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_DDR_SPD - #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 @@ -165,7 +148,7 @@ #define PIXIS_LBMAP_ALTBANK 0x40 #define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ @@ -250,7 +233,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -269,19 +251,6 @@ #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) /* I2C */ -#if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_LEGACY -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#else -#define CONFIG_I2C_SET_DEFAULT_BUS_NUM -#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 -#endif -#define CONFIG_SYS_I2C_FSL /* * RapidIO @@ -488,7 +457,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data @@ -498,10 +466,6 @@ #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - /* * Environment Configuration */ @@ -509,9 +473,6 @@ #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - #ifdef CONFIG_TARGET_P4080DS #define __USB_PHY_TYPE ulpi #else @@ -539,14 +500,14 @@ "fdtfile=p4080ds/p4080ds.dtb\0" \ "bdev=sda3\0" -#define CONFIG_HDBOOT \ +#define HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_NFSBOOTCOMMAND \ +#define NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ @@ -555,7 +516,7 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ @@ -563,7 +524,7 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT +#define CONFIG_BOOTCOMMAND HDBOOT #include <asm/fsl_secure_boot.h> |