diff options
Diffstat (limited to 'include/configs/bf609-ezkit.h')
| -rw-r--r-- | include/configs/bf609-ezkit.h | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h deleted file mode 100644 index 5791810b35..0000000000 --- a/include/configs/bf609-ezkit.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * U-Boot - Configuration file for BF609 EZ-Kit board - */ - -#ifndef __CONFIG_BF609_EZKIT_H__ -#define __CONFIG_BF609_EZKIT_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf609-0.0 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - -/* For ez-board version 1.0, else undef this */ -#define CONFIG_BFIN_BOARD_VERSION_1_0 - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV - * SCLK0 = SCLK / SCLK0_DIV - * SCLK1 = SCLK / SCLK1_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ (25000000) -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF (0) - -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-127 (where 0 means 128) */ -#define CONFIG_VCO_MULT (20) - -/* CCLK_DIV controls the core clock divider */ -/* Values can range from 0-31 (where 0 means 32) */ -#define CONFIG_CCLK_DIV (1) -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 0-31 (where 0 means 32) */ -#define CONFIG_SCLK_DIV (4) -/* Values can range from 0-7 (where 0 means 8) */ -#define CONFIG_SCLK0_DIV (1) -#define CONFIG_SCLK1_DIV (1) -/* DCLK_DIV controls the DDR clock divider */ -/* Values can range from 0-31 (where 0 means 32) */ -#define CONFIG_DCLK_DIV (2) -/* OCLK_DIV controls the output clock divider */ -/* Values can range from 0-127 (where 0 means 128) */ -#define CONFIG_OCLK_DIV (16) - -/* - * Memory Settings - */ -#define CONFIG_MEM_SIZE 128 - -#define CONFIG_SMC_GCTL_VAL 0x00000010 -#define CONFIG_SMC_B0CTL_VAL 0x01007011 -#define CONFIG_SMC_B0TIM_VAL 0x08170977 -#define CONFIG_SMC_B0ETIM_VAL 0x00092231 - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -#define CONFIG_HW_WATCHDOG -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK -#define CONFIG_NETCONSOLE -#define CONFIG_HOSTNAME "bf609-ezkit" -#define CONFIG_PHY_ADDR 1 -#define CONFIG_DW_PORTS 1 -#define CONFIG_DW_ALTDESCRIPTOR -#define CONFIG_MII - -/* i2c Settings */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI - -/* - * Flash Settings - */ -#undef CONFIG_CMD_JFFS2 -#define CONFIG_SYS_FLASH_CFI_WIDTH 2 -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0xb0000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI6XX -#define CONFIG_ENV_SPI_MAX_HZ 25000000 -#define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_SPI_FLASH_ALL - -/* - * Env Storage Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_OFFSET 0x8000 -#define CONFIG_ENV_SIZE 0x8000 -#define CONFIG_ENV_SECT_SIZE 0x8000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#endif - -#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" - -/* - * SDH Settings - */ -#define CONFIG_BFIN_SDH - -/* - * Misc Settings - */ -#define CONFIG_UART_CONSOLE 0 - -#define CONFIG_CMD_SOFTSWITCH - -#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) -#define CONFIG_BFIN_SOFT_SWITCH - -#define CONFIG_ADI_GPIO2 - -#if 0 -#define CONFIG_UART_MEM 1024 -#undef CONFIG_UART_CONSOLE -#undef CONFIG_JTAG_CONSOLE -#undef CONFIG_UART_CONSOLE_IS_JTAG -#endif - -#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) - -/* - * Run core 1 from L1 SRAM start address when init uboot on core 0 - */ -/* #define CONFIG_CORE1_RUN 1 */ - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> -#endif |