summaryrefslogtreecommitdiff
path: root/include/configs/Yukon8220.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/Yukon8220.h')
-rw-r--r--include/configs/Yukon8220.h208
1 files changed, 104 insertions, 104 deletions
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index cbc1ed688a7..c439068f533 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -35,8 +35,8 @@
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
-#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
-#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */
+#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
@@ -53,16 +53,16 @@
#ifdef CONFIG_EXTUART_CONSOLE
# define CONFIG_CONS_INDEX 1
-# define CFG_NS16550_SERIAL
-# define CFG_NS16550
-# define CFG_NS16550_REG_SIZE 1
-# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008)
-# define CFG_NS16550_CLK 18432000
+# define CONFIG_SYS_NS16550_SERIAL
+# define CONFIG_SYS_NS16550
+# define CONFIG_SYS_NS16550_REG_SIZE 1
+# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008)
+# define CONFIG_SYS_NS16550_CLK 18432000
#endif
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
@@ -120,104 +120,104 @@
* I2C configuration
*/
#define CONFIG_HARD_I2C 1
-#define CFG_I2C_MODULE 1
+#define CONFIG_SYS_I2C_MODULE 1
-#define CFG_I2C_SPEED 100000 /* 100 kHz */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
* EEPROM configuration
*/
-#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
/*
#define CONFIG_ENV_IS_IN_EEPROM 1
#define CONFIG_ENV_OFFSET 0
#define CONFIG_ENV_SIZE 256
*/
-/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
else undefined it will boot from Intel Strata flash */
-#define CFG_AMD_BOOT 1
+#define CONFIG_SYS_AMD_BOOT 1
/*
* Flexbus Chipselect configuration
*/
-#if defined (CFG_AMD_BOOT)
-#define CFG_CS0_BASE 0xfff0
-#define CFG_CS0_MASK 0x00080000 /* 512 KB */
-#define CFG_CS0_CTRL 0x003f0d40
-
-#define CFG_CS1_BASE 0xfe00
-#define CFG_CS1_MASK 0x01000000 /* 16 MB */
-#define CFG_CS1_CTRL 0x003f1540
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_CS0_BASE 0xfff0
+#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */
+#define CONFIG_SYS_CS0_CTRL 0x003f0d40
+
+#define CONFIG_SYS_CS1_BASE 0xfe00
+#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */
+#define CONFIG_SYS_CS1_CTRL 0x003f1540
#else
-#define CFG_CS0_BASE 0xff00
-#define CFG_CS0_MASK 0x01000000 /* 16 MB */
-#define CFG_CS0_CTRL 0x003f1540
+#define CONFIG_SYS_CS0_BASE 0xff00
+#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */
+#define CONFIG_SYS_CS0_CTRL 0x003f1540
-#define CFG_CS1_BASE 0xfe08
-#define CFG_CS1_MASK 0x00080000 /* 512 KB */
-#define CFG_CS1_CTRL 0x003f0d40
+#define CONFIG_SYS_CS1_BASE 0xfe08
+#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */
+#define CONFIG_SYS_CS1_CTRL 0x003f0d40
#endif
-#define CFG_CS2_BASE 0xf100
-#define CFG_CS2_MASK 0x00040000
-#define CFG_CS2_CTRL 0x003f1140
+#define CONFIG_SYS_CS2_BASE 0xf100
+#define CONFIG_SYS_CS2_MASK 0x00040000
+#define CONFIG_SYS_CS2_CTRL 0x003f1140
-#define CFG_CS3_BASE 0xf200
-#define CFG_CS3_MASK 0x00040000
-#define CFG_CS3_CTRL 0x003f1100
+#define CONFIG_SYS_CS3_BASE 0xf200
+#define CONFIG_SYS_CS3_MASK 0x00040000
+#define CONFIG_SYS_CS3_CTRL 0x003f1100
-#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16)
-#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16)
+#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16)
-#if defined (CFG_AMD_BOOT)
-#define CFG_AMD_BASE CFG_FLASH0_BASE
-#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000
-#define CFG_FLASH_BASE CFG_AMD_BASE
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE
#else
-#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000
-#define CFG_AMD_BASE CFG_FLASH1_BASE
-#define CFG_FLASH_BASE CFG_INTEL_BASE
+#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000
+#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE
#endif
-#define CFG_CPLD_BASE (CFG_CS2_BASE << 16)
-#define CFG_FPGA_BASE (CFG_CS3_BASE << 16)
+#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16)
+#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16)
-#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
-#define CFG_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_CHECKSUM
/*
* Environment settings
*/
#define CONFIG_ENV_IS_IN_FLASH 1
-#if defined (CFG_AMD_BOOT)
-#define CONFIG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE
#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE
#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE
#else
-#define CONFIG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE
#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE
#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE
#endif
@@ -235,51 +235,51 @@
#undef CONFIG_ENV_IS_IN_FLASH
#endif
-#ifndef CFG_JFFS2_FIRST_SECTOR
-#define CFG_JFFS2_FIRST_SECTOR 0
+#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0
#endif
-#ifndef CFG_JFFS2_FIRST_BANK
-#define CFG_JFFS2_FIRST_BANK 0
+#ifndef CONFIG_SYS_JFFS2_FIRST_BANK
+#define CONFIG_SYS_JFFS2_FIRST_BANK 0
#endif
-#ifndef CFG_JFFS2_NUM_BANKS
-#define CFG_JFFS2_NUM_BANKS 1
+#ifndef CONFIG_SYS_JFFS2_NUM_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#endif
-#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1)
/*
* Memory map
*/
-#define CFG_MBAR 0xF0000000
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_DEFAULT_MBAR 0x80000000
-#define CFG_SRAM_BASE (CFG_MBAR + 0x20000)
-#define CFG_SRAM_SIZE 0x8000
+#define CONFIG_SYS_MBAR 0xF0000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
+#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_SRAM_SIZE 0x8000
/* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000)
-#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT 1
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT 1
#endif
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* SDRAM configuration */
-#define CFG_SDRAM_TOTAL_BANKS 2
-#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
-#define CFG_SDRAM_SPD_SIZE 0x40
-#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
+#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2
+#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
+#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40
+#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
/* SDRAM drive strength register */
-#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
+#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
(DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
(DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
@@ -296,33 +296,33 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Various low-level settings
*/
-#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL HID0_ICE
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
#endif /* __CONFIG_H */