diff options
Diffstat (limited to 'include/configs/MPC8349EMDS.h')
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 58 |
1 files changed, 2 insertions, 56 deletions
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index b4e1cae8938..dd11e9841e9 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -22,8 +22,6 @@ /* * DDR Setup */ -#define CONFIG_DDR_ECC /* support DDR ECC function */ -#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* @@ -35,26 +33,11 @@ #define SPD_EEPROM_ADDRESS2 0x51 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -/* - * 32-bit data path mode. - * - * Please note that using this mode for devices with the real density of 64-bit - * effectively reduces the amount of available memory due to the effect of - * wrapping around while translating address to row/columns, for example in the - * 256MB module the upper 128MB get aliased with contents of the lower - * 128MB); normally this define should be used for devices with real 32-bit - * data path. - */ -#undef CONFIG_DDR_32BIT - #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#undef CONFIG_DDR_2T_TIMING - /* * DDRCDR - DDR Control Driver Register */ @@ -70,21 +53,6 @@ * Manually set up DDR parameters */ #define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#if defined(CONFIG_DDR_II) -#define CONFIG_SYS_DDRCDR 0x80080001 -#define CONFIG_SYS_DDR_CS2_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS2_CONFIG 0x80330102 -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x38357322 -#define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000 -#define CONFIG_SYS_DDR_MODE 0x47d00432 -#define CONFIG_SYS_DDR_MODE2 0x8000c000 -#define CONFIG_SYS_DDR_INTERVAL 0x03cf0080 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#else #define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \ | CSCONFIG_ROW_BIT_13 \ | CSCONFIG_COL_BIT_10) @@ -93,17 +61,10 @@ #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ #define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ -#if defined(CONFIG_DDR_32BIT) -/* set burst length to 8 for 32-bit data path */ - /* DLL,normal,seq,4/2.5, 8 burst len */ -#define CONFIG_SYS_DDR_MODE 0x00000023 -#else /* the default burst length is 4 - for 64-bit data path */ /* DLL,normal,seq,4/2.5, 4 burst len */ #define CONFIG_SYS_DDR_MODE 0x00000022 #endif -#endif -#endif /* * SDRAM on the Local Bus @@ -149,7 +110,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* * Serial Port @@ -165,14 +125,6 @@ #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) /* I2C */ -#define CONFIG_SYS_I2C_LEGACY -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* SPI */ @@ -218,9 +170,6 @@ #if defined(CONFIG_PCI) -#define CONFIG_83XX_PCI_STREAMING - - #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xFIXME #define PCI_ENET0_MEMADDR 0xFIXME @@ -280,7 +229,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data @@ -320,8 +268,6 @@ #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=mpc8349emds\0" \ @@ -346,7 +292,7 @@ "fdtfile=mpc834x_mds.dtb\0" \ "" -#define CONFIG_NFSBOOTCOMMAND \ +#define NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ @@ -356,7 +302,7 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ |