diff options
Diffstat (limited to 'include/configs/MPC8260ADS.h')
-rw-r--r-- | include/configs/MPC8260ADS.h | 23 |
1 files changed, 15 insertions, 8 deletions
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 254ec46f175..9625cdf1765 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -10,7 +10,7 @@ * (C) Copyright 2003 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2. - * Ported to PQ2FADS-ZU board. + * Ported to PQ2FADS-ZU and PQ2FADS-VR boards. * * See file CREDITS for list of people who contributed to this * project. @@ -45,7 +45,7 @@ /* ADS flavours */ #define CFG_8260ADS 1 /* MPC8260ADS */ #define CFG_8266ADS 2 /* MPC8266ADS */ -#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */ +#define CFG_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */ #ifndef CONFIG_ADSTYPE #define CONFIG_ADSTYPE CFG_8260ADS @@ -130,7 +130,7 @@ #undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */ #else #define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR) @@ -139,14 +139,14 @@ #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ #ifndef CONFIG_SDRAM_PBI -#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */ +#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */ #endif #ifndef CONFIG_8260_CLKIN #if CONFIG_ADSTYPE == CFG_PQ2FADS #define CONFIG_8260_CLKIN 100000000 /* in Hz */ #else -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ +#define CONFIG_8260_CLKIN 66000000 /* in Hz */ #endif #endif @@ -188,7 +188,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram rw" @@ -201,7 +200,8 @@ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #endif -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ /* * Miscellaneous configurable options @@ -291,9 +291,14 @@ #endif #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ + #ifndef CFG_RAMBOOT # define CFG_ENV_IS_IN_FLASH 1 # define CFG_ENV_SECT_SIZE 0x40000 @@ -335,12 +340,14 @@ #endif /* CONFIG_ADSTYPE == CFG_8266ADS */ #if CONFIG_ADSTYPE == CFG_PQ2FADS +#define CFG_OR2 0xFE002EC0 #define CFG_PSDMR 0x824B36A3 #define CFG_PSRT 0x13 #define CFG_LSDMR 0x828737A3 #define CFG_LSRT 0x13 #define CFG_MPTPR 0x2800 #else +#define CFG_OR2 0xFF000CA0 #define CFG_PSDMR 0x016EB452 #define CFG_PSRT 0x21 #define CFG_LSDMR 0x0086A522 |