summaryrefslogtreecommitdiff
path: root/include/configs/M5475EVB.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M5475EVB.h')
-rw-r--r--include/configs/M5475EVB.h198
1 files changed, 99 insertions, 99 deletions
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 37b1c603dca..e48de15f79a 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -39,9 +39,9 @@
#define CONFIG_M5475 /* define processor type */
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
@@ -72,27 +72,27 @@
# define CONFIG_MII_INIT 1
# define CONFIG_HAS_ETH1
-# define CFG_DMA_USE_INTSRAM 1
-# define CFG_DISCOVER_PHY
-# define CFG_RX_ETH_BUFFER 32
-# define CFG_TX_ETH_BUFFER 48
-# define CFG_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_DMA_USE_INTSRAM 1
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 32
+# define CONFIG_SYS_TX_ETH_BUFFER 48
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CFG_FEC0_PINMUX 0
-# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define CFG_FEC1_PINMUX 0
-# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+# define CONFIG_SYS_FEC1_PINMUX 0
+# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
-# ifndef CFG_FAULT_ECHO_LINK_DOWN
-# define CFG_FAULT_ECHO_LINK_DOWN
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# endif
-# endif /* CFG_DISCOVER_PHY */
+# endif /* CONFIG_SYS_DISCOVER_PHY */
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
@@ -114,21 +114,21 @@
# define CONFIG_PCI_OHCI
# define CONFIG_DOS_PARTITION
-# undef CFG_USB_OHCI_BOARD_INIT
-# undef CFG_USB_OHCI_CPU_INIT
-# define CFG_USB_OHCI_MAX_ROOT_PORTS 15
-# define CFG_USB_OHCI_SLOT_NAME "isp1561"
-# define CFG_OHCI_SWAP_REG_ACCESS
+# undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+# undef CONFIG_SYS_USB_OHCI_CPU_INIT
+# define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+# define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561"
+# define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
#endif
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 80000
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_OFFSET 0x00008F00
-#define CFG_IMMR CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x00008F00
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
/* PCI */
#ifdef CONFIG_CMD_PCI
@@ -136,19 +136,19 @@
#define CONFIG_PCI_PNP 1
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-#define CFG_PCI_CACHE_LINE_SIZE 8
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
-#define CFG_PCI_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-#define CFG_PCI_IO_BUS 0x71000000
-#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
-#define CFG_PCI_IO_SIZE 0x01000000
+#define CONFIG_SYS_PCI_IO_BUS 0x71000000
+#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE 0x01000000
-#define CFG_PCI_CFG_BUS 0x70000000
-#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
-#define CFG_PCI_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCI_CFG_BUS 0x70000000
+#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
#endif
#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
@@ -177,29 +177,29 @@
""
#define CONFIG_PRAM 512 /* 512 KB */
-#define CFG_PROMPT "-> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#ifdef CONFIG_CMD_KGDB
-# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00010000
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x00010000
-#define CFG_HZ 1000
-#define CFG_CLK CFG_BUSCLK
-#define CFG_CPU_CLK CFG_CLK * 2
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK
+#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
-#define CFG_MBAR 0xF0000000
-#define CFG_INTSRAM (CFG_MBAR + 0x10000)
-#define CFG_INTSRAMSZ 0x8000
+#define CONFIG_SYS_MBAR 0xF0000000
+#define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000)
+#define CONFIG_SYS_INTSRAMSZ 0x8000
-/*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/
+/*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/
/*
* Low Level Configuration Settings
@@ -209,68 +209,68 @@
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0xF2000000
-#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL 0x21
-#define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
-#define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
-#define CFG_INIT_RAM1_CTRL 0x21
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000
+#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL 0x21
+#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END)
+#define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM1_CTRL 0x21
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_CFG1 0x73711630
-#define CFG_SDRAM_CFG2 0x46770000
-#define CFG_SDRAM_CTRL 0xE10B0000
-#define CFG_SDRAM_EMOD 0x40010000
-#define CFG_SDRAM_MODE 0x018D0000
-#define CFG_SDRAM_DRVSTRENGTH 0x000002AA
-#ifdef CFG_DRAMSZ1
-# define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1)
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_CFG1 0x73711630
+#define CONFIG_SYS_SDRAM_CFG2 0x46770000
+#define CONFIG_SYS_SDRAM_CTRL 0xE10B0000
+#define CONFIG_SYS_SDRAM_EMOD 0x40010000
+#define CONFIG_SYS_SDRAM_MODE 0x018D0000
+#define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA
+#ifdef CONFIG_SYS_DRAMSZ1
+# define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1)
#else
-# define CFG_SDRAM_SIZE CFG_DRAMSZ
+# define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ
#endif
-#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_BOOTPARAMS_LEN 64*1024
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
-# define CFG_FLASH_BASE (CFG_CS0_BASE)
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+# define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE)
# define CONFIG_FLASH_CFI_DRIVER 1
-# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-# define CFG_FLASH_USE_BUFFER_WRITE
-#ifdef CFG_NOR1SZ
-# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-# define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
-# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_NOR1SZ
+# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+# define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
+# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
#else
-# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CFG_FLASH_SIZE (CFG_BOOTSZ << 20)
+# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20)
#endif
#endif
@@ -285,7 +285,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Chipselect bank definitions
@@ -298,14 +298,14 @@
* CS4 - Available
* CS5 - Available
*/
-#define CFG_CS0_BASE 0xFF800000
-#define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS0_CTRL 0x00101980
-
-#ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE 0xE0000000
-#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL 0x00101D80
+#define CONFIG_SYS_CS0_BASE 0xFF800000
+#define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS0_CTRL 0x00101980
+
+#ifdef CONFIG_SYS_NOR1SZ
+#define CONFIG_SYS_CS1_BASE 0xE0000000
+#define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS1_CTRL 0x00101D80
#endif
#endif /* _M5475EVB_H */