summaryrefslogtreecommitdiff
path: root/include/configs/ELPPC.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ELPPC.h')
-rw-r--r--include/configs/ELPPC.h204
1 files changed, 102 insertions, 102 deletions
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 08e3d711348..79392668e07 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -63,7 +63,7 @@
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
/*
* BOOTP options
@@ -88,8 +88,8 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
/*
* choose between COM1 and COM2 as serial console
@@ -97,72 +97,72 @@
#define CONFIG_CONS_INDEX 1
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
-#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CFG_HZ 1000 /* dec. freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
#define CONFIG_MISC_INIT_R
/*
* Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
*/
-#undef CFG_ADDRESS_MAP_A
+#undef CONFIG_SYS_ADDRESS_MAP_A
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x40000000
+#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS 0x80000000
-#define CFG_PCI_MEM_SIZE 0x7d000000
+#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
-#define CFG_ISA_MEM_BUS 0x00000000
-#define CFG_ISA_MEM_PHYS 0xfd000000
-#define CFG_ISA_MEM_SIZE 0x01000000
+#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
+#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-#define CFG_PCI_IO_BUS 0x00800000
-#define CFG_PCI_IO_PHYS 0xfe800000
-#define CFG_PCI_IO_SIZE 0x00400000
+#define CONFIG_SYS_PCI_IO_BUS 0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
+#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0xfe000000
-#define CFG_ISA_IO_SIZE 0x00800000
+#define CONFIG_SYS_ISA_IO_BUS 0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
+#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
/* driver defines FDC,IDE,... */
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
/*
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CFG_USR_LED_BASE 0x78000000
-#define CFG_NVRAM_BASE 0xff000000
-#define CFG_UART_BASE 0xff400000
-#define CFG_FLASH_BASE 0xfff00000
+#define CONFIG_SYS_USR_LED_BASE 0x78000000
+#define CONFIG_SYS_NVRAM_BASE 0xff000000
+#define CONFIG_SYS_UART_BASE 0xff400000
+#define CONFIG_SYS_FLASH_BASE 0xfff00000
#define MPC107_EUMB_ADDR 0xfce00000
#define MPC107_EUMB_PI 0xfce41090
@@ -173,11 +173,11 @@
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
-#define CFG_INIT_RAM_END 0x4000
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
+#define CONFIG_SYS_INIT_RAM_END 0x4000
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Flash mapping/organization on the MPC10x.
@@ -185,11 +185,11 @@
#define FLASH_BASE0_PRELIM 0xff800000
#define FLASH_BASE1_PRELIM 0xffc00000
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/*
* JFFS2 partitions
@@ -209,33 +209,33 @@
#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
*/
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
-#undef CFG_MEMTEST
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
+#undef CONFIG_SYS_MEMTEST
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CFG_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
+#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
#define CONFIG_ENV_ADDR 0x0
#define CONFIG_ENV_MAP_ADRS 0xff000000
-#define CFG_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CFG_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
-#define CFG_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
+#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
+#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
/*
* Serial devices
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK 24000000
-#define CFG_NS16550_COM1 (CFG_UART_BASE + 0)
-#define CFG_NS16550_COM2 (CFG_UART_BASE + 8)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK 24000000
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8)
/*
* PCI stuff
@@ -263,74 +263,74 @@
*/
#if 1
-#define CFG_IBAT0L 0
-#define CFG_IBAT0U 0
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L 0
+#define CONFIG_SYS_IBAT0U 0
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-#define CFG_IBAT1L 0
-#define CFG_IBAT1U 0
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L 0
+#define CONFIG_SYS_IBAT1U 0
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CFG_IBAT2L 0
-#define CFG_IBAT2U 0
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L 0
+#define CONFIG_SYS_IBAT2U 0
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CFG_IBAT3L 0
-#define CFG_IBAT3U 0
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L 0
+#define CONFIG_SYS_IBAT3U 0
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
#else
/* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
/* address range for flashes */
-#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* ISA IO space */
-#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* ISA memory space */
-#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
#endif
/*
* Speed settings are board specific
*/
-#define CFG_BUS_HZ 100000000
-#define CFG_CPU_CLK 400000000
-#define CFG_BUS_CLK CFG_BUS_HZ
+#define CONFIG_SYS_BUS_HZ 100000000
+#define CONFIG_SYS_CPU_CLK 400000000
+#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
@@ -338,7 +338,7 @@
* look in include/74xx_7xx.h for the defines used here
*/
-#define CFG_L2
+#define CONFIG_SYS_L2
#if 1
#define L2_INIT 0 /* cpu 750 CXe*/
@@ -358,7 +358,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE
#endif /* __CONFIG_H */