diff options
Diffstat (limited to 'include/asm-blackfin')
-rw-r--r-- | include/asm-blackfin/blackfin-config-post.h | 84 | ||||
-rw-r--r-- | include/asm-blackfin/blackfin_local.h | 2 | ||||
-rw-r--r-- | include/asm-blackfin/mach-common/bits/bootrom.h | 72 | ||||
-rw-r--r-- | include/asm-blackfin/mach-common/bits/ebiu.h | 21 | ||||
-rw-r--r-- | include/asm-blackfin/mach-common/bits/otp.h | 21 |
5 files changed, 151 insertions, 49 deletions
diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h index 0ab68ace75f..21abd724fbe 100644 --- a/include/asm-blackfin/blackfin-config-post.h +++ b/include/asm-blackfin/blackfin-config-post.h @@ -1,7 +1,7 @@ /* * blackfin-config-post.h - setup common defines for Blackfin boards based on config.h * - * Copyright (c) 2007 Analog Devices Inc. + * Copyright (c) 2007-2008 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -9,11 +9,6 @@ #ifndef __ASM_BLACKFIN_CONFIG_POST_H__ #define __ASM_BLACKFIN_CONFIG_POST_H__ -/* Check to make sure everything fits in external RAM */ -#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) -# error Memory Map does not fit into configuration -#endif - /* Sanity check CONFIG_BFIN_CPU */ #ifndef CONFIG_BFIN_CPU # error CONFIG_BFIN_CPU: your board config needs to define this @@ -65,8 +60,81 @@ #endif /* Using L1 scratch pad makes sense for everyone by default. */ -#ifndef CMD_LINE_ADDR -# define CMD_LINE_ADDR L1_SRAM_SCRATCH +#ifndef CONFIG_LINUX_CMDLINE_ADDR +# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH +#endif +#ifndef CONFIG_LINUX_CMDLINE_SIZE +# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE +#endif + +/* Default/common Blackfin memory layout */ +#ifndef CONFIG_SYS_SDRAM_BASE +# define CONFIG_SYS_SDRAM_BASE 0 +#endif +#ifndef CONFIG_SYS_MAX_RAM_SIZE +# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#endif +#ifndef CONFIG_SYS_MONITOR_BASE +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +#endif +#ifndef CONFIG_SYS_MALLOC_BASE +# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#endif +#ifndef CONFIG_SYS_GBL_DATA_SIZE +# define CONFIG_SYS_GBL_DATA_SIZE (128) +#endif +#ifndef CONFIG_SYS_GBL_DATA_ADDR +# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#endif +#ifndef CONFIG_STACKBASE +# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) +#endif +#ifndef CONFIG_SYS_MEMTEST_START +# define CONFIG_SYS_MEMTEST_START 0 +#endif +#ifndef CONFIG_SYS_MEMTEST_END +# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4) +#endif + +/* Check to make sure everything fits in external RAM */ +#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) +# error Memory Map does not fit into configuration +#endif + +/* Default/common Blackfin environment settings */ +#ifndef CONFIG_LOADADDR +# define CONFIG_LOADADDR 0x1000000 +#endif +#ifndef CONFIG_SYS_LOAD_ADDR +# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#endif +#ifndef CONFIG_SYS_BOOTM_LEN +# define CONFIG_SYS_BOOTM_LEN 0x4000000 +#endif +#ifndef CONFIG_SYS_PROMPT +# define CONFIG_SYS_PROMPT "bfin> " +#endif +#ifndef CONFIG_SYS_CBSIZE +# ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 +# else +# define CONFIG_SYS_CBSIZE 256 +# endif +#endif +#ifndef CONFIG_SYS_BARGSIZE +# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#endif +#ifndef CONFIG_SYS_PBSIZE +# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#endif +#ifndef CONFIG_SYS_MAXARGS +# define CONFIG_SYS_MAXARGS 16 +#endif +#ifndef CONFIG_SYS_HZ +# define CONFIG_SYS_HZ 1000 +#endif +#ifndef CONFIG_SYS_BAUDRATE_TABLE +# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif #endif diff --git a/include/asm-blackfin/blackfin_local.h b/include/asm-blackfin/blackfin_local.h index 6f0e662a959..c9ee91a4390 100644 --- a/include/asm-blackfin/blackfin_local.h +++ b/include/asm-blackfin/blackfin_local.h @@ -58,7 +58,7 @@ extern u_long get_sclk(void); extern void blackfin_icache_flush_range(const void *, const void *); extern void blackfin_dcache_flush_range(const void *, const void *); -extern void blackfin_dcache_invalidate_range(const void *, const void *); +extern void blackfin_dcache_flush_invalidate_range(const void *, const void *); /* Use DMA to move data from on chip to external memory. While this is * required for only L1 instruction (it is not directly readable by the diff --git a/include/asm-blackfin/mach-common/bits/bootrom.h b/include/asm-blackfin/mach-common/bits/bootrom.h index 6cdaa4f8944..fb97ff81b3b 100644 --- a/include/asm-blackfin/mach-common/bits/bootrom.h +++ b/include/asm-blackfin/mach-common/bits/bootrom.h @@ -88,27 +88,42 @@ #define _BOOTROM_REV 0xEF000040 #define _BOOTROM_SESR 0xEF001000 +#define BOOTROM_FOLLOWS_C_ABI 1 + #define BOOTROM_CAPS_ADI_BOOT_STRUCTS 1 -/* Not available on initial BF54x or BF52x */ -#if (defined(__ADSPBF54x__) && __SILICON_REVISION__ < 1) || \ - (defined(__ADSPBF52x__) && __SILICON_REVISION__ < 2) -#define BOOTROM_CAPS_SYSCONTROL 0 -#else -#define BOOTROM_CAPS_SYSCONTROL 1 #endif +#ifndef BOOTROM_FOLLOWS_C_ABI +#define BOOTROM_FOLLOWS_C_ABI 0 #endif - #ifndef BOOTROM_CAPS_ADI_BOOT_STRUCTS #define BOOTROM_CAPS_ADI_BOOT_STRUCTS 0 #endif -#ifndef BOOTROM_CAPS_SYSCONTROL -#define BOOTROM_CAPS_SYSCONTROL 0 -#endif + +/* Possible syscontrol action flags */ +#define SYSCTRL_READ 0x00000000 /* read registers */ +#define SYSCTRL_WRITE 0x00000001 /* write registers */ +#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */ +#define SYSCTRL_CORERESET 0x00000004 /* perform core reset */ +#define SYSCTRL_SOFTRESET 0x00000006 /* perform core and system reset */ +#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */ +#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */ +#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */ +#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */ +#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */ +#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */ +#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */ +#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */ #ifndef __ASSEMBLY__ +#if BOOTROM_FOLLOWS_C_ABI +# define BOOTROM_CALLED_FUNC_ATTR +#else +# define BOOTROM_CALLED_FUNC_ATTR __attribute__((saveall)) +#endif + /* Structures for the syscontrol() function */ typedef struct ADI_SYSCTRL_VALUES { uint16_t uwVrCtl; @@ -121,25 +136,26 @@ typedef struct ADI_SYSCTRL_VALUES { #ifndef _BOOTROM_SYSCONTROL #define _BOOTROM_SYSCONTROL 0 #endif -static uint32_t (* const syscontrol)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)_BOOTROM_SYSCONTROL; - -#endif /* __ASSEMBLY__ */ - -/* Possible syscontrol action flags */ -#define SYSCTRL_READ 0x00000000 /* read registers */ -#define SYSCTRL_WRITE 0x00000001 /* write registers */ -#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */ -#define SYSCTRL_SOFTRESET 0x00000004 /* perform core and system reset */ -#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */ -#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */ -#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */ -#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */ -#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */ -#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */ -#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */ -#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */ +static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)_BOOTROM_SYSCONTROL; -#ifndef __ASSEMBLY__ +/* We need a dedicated function since we need to screw with the stack pointer + * when resetting. The on-chip ROM will save/restore registers on the stack + * when doing a system reset, so the stack cannot be outside of the chip. + */ +__attribute__((__noreturn__)) +static inline void bfrom_SoftReset(void *new_stack) +{ + while (1) + __asm__ __volatile__( + "sp = %[stack];" + "jump (%[bfrom_syscontrol]);" + : : [bfrom_syscontrol] "p"(bfrom_SysControl), + "q0"(SYSCTRL_SOFTRESET), + "q1"(0), + "q2"(NULL), + [stack] "p"(new_stack) + ); +} /* Structures for working with LDRs and boot rom callbacks */ typedef struct ADI_BOOT_HEADER { diff --git a/include/asm-blackfin/mach-common/bits/ebiu.h b/include/asm-blackfin/mach-common/bits/ebiu.h index ab530ad869e..af456fbe980 100644 --- a/include/asm-blackfin/mach-common/bits/ebiu.h +++ b/include/asm-blackfin/mach-common/bits/ebiu.h @@ -410,12 +410,31 @@ /* EBIU_SDSTAT Masks */ #define SDCI 0x0001 /* SDRAM controller is idle */ -#define SDSRA 0x0002 /* SDRAM SDRAM self refresh is active */ +#define SDSRA 0x0002 /* SDRAM self refresh is active */ #define SDPUA 0x0004 /* SDRAM power up active */ #define SDRS 0x0008 /* SDRAM is in reset state */ #define SDEASE 0x0010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x0020 /* Bus granted */ +/* Only available on DDR based-parts */ +#else + +/* EBIU_ERRMST Masks */ +#define DEB0_ERROR 0x0001 /* DEB0 access on reserved memory */ +#define DEB1_ERROR 0x0002 /* DEB1 access on reserved memory */ +#define DEB2_ERROR 0x0004 /* DEB2 (USB) access on reserved memory */ +#define CORE_ERROR 0x0008 /* Core access on reserved memory */ +#define DEB0_MERROR 0x0010 /* DEB0 access on reserved memory and DEB0_ERROR is set */ +#define DEB1_MERROR 0x0020 /* DEB1 access on reserved memory and DEB1_ERROR is set */ +#define DEB2_MERROR 0x0040 /* DEB2 access on reserved memory and DEB2_ERROR is set */ +#define CORE_MERROR 0x0080 /* Core access on reserved memory and CORE_ERROR is set */ + +/* EBIU_RSTCTL Masks */ +#define DDR_SRESET 0x0001 /* Reset Control to DDR Controller */ +#define SRREQ 0x0008 /* Self Refresh Request */ +#define SRACK 0x0010 /* Self Refresh Request Acknowledgement */ +#define MDDRENABLE 0x0020 /* Mobile DDR Enable */ + #endif /* EBIU_SDGCTL */ #endif diff --git a/include/asm-blackfin/mach-common/bits/otp.h b/include/asm-blackfin/mach-common/bits/otp.h index d529a0a9829..4e3f1afcfa0 100644 --- a/include/asm-blackfin/mach-common/bits/otp.h +++ b/include/asm-blackfin/mach-common/bits/otp.h @@ -9,23 +9,22 @@ #include "bootrom.h" -static uint32_t (* const otp_command)(uint32_t command, uint32_t value) = (void *)_BOOTROM_OTP_COMMAND; -static uint32_t (* const otp_read)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_READ; -static uint32_t (* const otp_write)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_WRITE; +static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)_BOOTROM_OTP_COMMAND; +static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_READ; +static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_WRITE; #endif /* otp_command(): defines for "command" */ -#define OTP_INIT 0x00000001 -#define OTP_CLOSE 0x00000002 +#define OTP_INIT 0x00000001 +#define OTP_CLOSE 0x00000002 /* otp_{read,write}(): defines for "flags" */ -#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */ -#define OTP_UPPER_HALF 0x00000001 -#define OTP_NO_ECC 0x00000010 /* do not use ECC */ -#define OTP_LOCK 0x00000020 /* sets page protection bit for page */ -#define OTP_ACCESS_READ 0x00001000 -#define OTP_ACCESS_READWRITE 0x00002000 +#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */ +#define OTP_UPPER_HALF 0x00000001 +#define OTP_NO_ECC 0x00000010 /* do not use ECC */ +#define OTP_LOCK 0x00000020 /* sets page protection bit for page */ +#define OTP_CHECK_FOR_PREV_WRITE 0x00000080 /* Return values for all functions */ #define OTP_SUCCESS 0x00000000 |