diff options
Diffstat (limited to 'drivers')
33 files changed, 1226 insertions, 914 deletions
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index f0d611007a..75d182d27f 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -1,6 +1,5 @@ config DM bool "Enable Driver Model" - depends on !SPL_BUILD help This config option enables Driver Model. This brings in the core support, including scanning of platform data on start-up. If @@ -22,31 +21,28 @@ config SPL_DM config DM_WARN bool "Enable warnings in driver model" + depends on DM + default y help The dm_warn() function can use up quite a bit of space for its strings. By default this is disabled for SPL builds to save space. This will cause dm_warn() to be compiled out - it will do nothing when called. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD config DM_DEVICE_REMOVE bool "Support device removal" + depends on DM + default y help We can save some code space by dropping support for removing a device. This is not normally required in SPL, so by default this option is disabled for SPL. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD config DM_STDIO bool "Support stdio registration" + depends on DM + default y help Normally serial drivers register with stdio so that they can be used as normal output devices. In SPL we don't normally use stdio, so we can omit this feature. - depends on DM - default y if !SPL_BUILD - default n if SPL_BUILD diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c index bc0107521c..9923bcbfe9 100644 --- a/drivers/crypto/fsl/fsl_blob.c +++ b/drivers/crypto/fsl/fsl_blob.c @@ -11,7 +11,7 @@ #include "desc.h" #include "jr.h" -int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +int blob_decap(u8 *key_mod, u8 *src, u8 *dst, u32 len) { int ret, i = 0; u32 *desc; @@ -36,7 +36,7 @@ int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) return ret; } -int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +int blob_encap(u8 *key_mod, u8 *src, u8 *dst, u32 len) { int ret, i = 0; u32 *desc; diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c index d77f2573d0..c298404f25 100644 --- a/drivers/crypto/fsl/fsl_hash.c +++ b/drivers/crypto/fsl/fsl_hash.c @@ -10,6 +10,9 @@ #include "jobdesc.h" #include "desc.h" #include "jr.h" +#include "fsl_hash.h" +#include <hw_sha.h> +#include <asm-generic/errno.h> #define CRYPTO_MAX_ALG_NAME 80 #define SHA1_DIGEST_SIZE 20 @@ -39,6 +42,122 @@ static struct caam_hash_template driver_hash[] = { }, }; +static enum caam_hash_algos get_hash_type(struct hash_algo *algo) +{ + if (!strcmp(algo->name, driver_hash[SHA1].name)) + return SHA1; + else + return SHA256; +} + +/* Create the context for progressive hashing using h/w acceleration. + * + * @ctxp: Pointer to the pointer of the context for hashing + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -ENOMEM on error + */ +static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo) +{ + *ctxp = calloc(1, sizeof(struct sha_ctx)); + if (*ctxp == NULL) { + debug("Cannot allocate memory for context\n"); + return -ENOMEM; + } + return 0; +} + +/* + * Update sg table for progressive hashing using h/w acceleration + * + * The context is freed by this function if an error occurs. + * We support at most 32 Scatter/Gather Entries. + * + * @hash_ctx: Pointer to the context for hashing + * @buf: Pointer to the buffer being hashed + * @size: Size of the buffer being hashed + * @is_last: 1 if this is the last update; 0 otherwise + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -EINVAL on error + */ +static int caam_hash_update(void *hash_ctx, const void *buf, + unsigned int size, int is_last, + enum caam_hash_algos caam_algo) +{ + uint32_t final = 0; + dma_addr_t addr = virt_to_phys((void *)buf); + struct sha_ctx *ctx = hash_ctx; + + if (ctx->sg_num >= MAX_SG_32) { + free(ctx); + return -EINVAL; + } + +#ifdef CONFIG_PHYS_64BIT + ctx->sg_tbl[ctx->sg_num].addr_hi = addr >> 32; +#else + ctx->sg_tbl[ctx->sg_num].addr_hi = 0x0; +#endif + ctx->sg_tbl[ctx->sg_num].addr_lo = addr; + + sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag, + (size & SG_ENTRY_LENGTH_MASK)); + + ctx->sg_num++; + + if (is_last) { + final = sec_in32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag) | + SG_ENTRY_FINAL_BIT; + sec_out32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag, final); + } + + return 0; +} + +/* + * Perform progressive hashing on the given buffer and copy hash at + * destination buffer + * + * The context is freed after completion of hash operation. + * + * @hash_ctx: Pointer to the context for hashing + * @dest_buf: Pointer to the destination buffer where hash is to be copied + * @size: Size of the buffer being hashed + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -EINVAL on error + */ +static int caam_hash_finish(void *hash_ctx, void *dest_buf, + int size, enum caam_hash_algos caam_algo) +{ + uint32_t len = 0; + struct sha_ctx *ctx = hash_ctx; + int i = 0, ret = 0; + + if (size < driver_hash[caam_algo].digestsize) { + free(ctx); + return -EINVAL; + } + + for (i = 0; i < ctx->sg_num; i++) + len += (sec_in32(&ctx->sg_tbl[i].len_flag) & + SG_ENTRY_LENGTH_MASK); + + inline_cnstr_jobdesc_hash(ctx->sha_desc, (uint8_t *)ctx->sg_tbl, len, + ctx->hash, + driver_hash[caam_algo].alg_type, + driver_hash[caam_algo].digestsize, + 1); + + ret = run_descriptor_jr(ctx->sha_desc); + + if (ret) + debug("Error %x\n", ret); + else + memcpy(dest_buf, ctx->hash, sizeof(ctx->hash)); + + free(ctx); + return ret; +} + int caam_hash(const unsigned char *pbuf, unsigned int buf_len, unsigned char *pout, enum caam_hash_algos algo) { @@ -48,7 +167,7 @@ int caam_hash(const unsigned char *pbuf, unsigned int buf_len, desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE); if (!desc) { debug("Not enough memory for descriptor allocation\n"); - return -1; + return -ENOMEM; } inline_cnstr_jobdesc_hash(desc, pbuf, buf_len, pout, @@ -75,3 +194,20 @@ void hw_sha1(const unsigned char *pbuf, unsigned int buf_len, if (caam_hash(pbuf, buf_len, pout, SHA1)) printf("CAAM was not setup properly or it is faulty\n"); } + +int hw_sha_init(struct hash_algo *algo, void **ctxp) +{ + return caam_hash_init(ctxp, get_hash_type(algo)); +} + +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last) +{ + return caam_hash_update(ctx, buf, size, is_last, get_hash_type(algo)); +} + +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size) +{ + return caam_hash_finish(ctx, dest_buf, size, get_hash_type(algo)); +} diff --git a/drivers/crypto/fsl/fsl_hash.h b/drivers/crypto/fsl/fsl_hash.h new file mode 100644 index 0000000000..f5be651d7a --- /dev/null +++ b/drivers/crypto/fsl/fsl_hash.h @@ -0,0 +1,34 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef _SHA_H +#define _SHA_H + +#include <fsl_sec.h> +#include <hash.h> +#include "jr.h" + +/* We support at most 32 Scatter/Gather Entries.*/ +#define MAX_SG_32 32 + +/* + * Hash context contains the following fields + * @sha_desc: Sha Descriptor + * @sg_num: number of entries in sg table + * @len: total length of buffer + * @sg_tbl: sg entry table + * @hash: index to the hash calculated + */ +struct sha_ctx { + uint32_t sha_desc[64]; + uint32_t sg_num; + uint32_t len; + struct sg_entry sg_tbl[MAX_SG_32]; + u8 hash[HASH_MAX_DIGEST_SIZE]; +}; + +#endif diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c index c139da6da9..7160da4ec8 100644 --- a/drivers/ddr/fsl/arm_ddr_gen3.c +++ b/drivers/ddr/fsl/arm_ddr_gen3.c @@ -222,7 +222,7 @@ step2: bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 1; + (get_ddr_freq(ctrl_num) >> 20)) << 1; total_gb_size_per_controller >>= 4; /* shift down to gb size */ debug("total %d GB\n", total_gb_size_per_controller); debug("Need to wait up to %d * 10ms\n", timeout); diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index 03d7ff17dd..690e73dacf 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -17,8 +17,6 @@ #include <fsl_immap.h> #include <asm/io.h> -unsigned int picos_to_mclk(unsigned int picos); - /* * Determine Rtt value. * @@ -78,10 +76,11 @@ static inline int fsl_ddr_get_rtt(void) * 16 for <= 2933MT/s * 18 for higher */ -static inline unsigned int compute_cas_write_latency(void) +static inline unsigned int compute_cas_write_latency( + const unsigned int ctrl_num) { unsigned int cwl; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (mclk_ps >= 1250) cwl = 9; else if (mclk_ps >= 1070) @@ -111,10 +110,11 @@ static inline unsigned int compute_cas_write_latency(void) * 11 if 0.935ns > tCK >= 0.833ns * 12 if 0.833ns > tCK >= 0.75ns */ -static inline unsigned int compute_cas_write_latency(void) +static inline unsigned int compute_cas_write_latency( + const unsigned int ctrl_num) { unsigned int cwl; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (mclk_ps >= 2500) cwl = 5; @@ -287,7 +287,8 @@ static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) * Avoid writing for DDR I. The new PQ38 DDR controller * dreams up non-zero default values to be backwards compatible. */ -static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, +static void set_timing_cfg_0(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const dimm_params_t *dimm_params) { @@ -306,7 +307,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; #if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3) - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #endif #ifdef CONFIG_SYS_FSL_DDR4 @@ -314,15 +315,15 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */ trwt_mclk = 2; twrt_mclk = 1; - act_pd_exit_mclk = picos_to_mclk(txp); + act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp); pre_pd_exit_mclk = act_pd_exit_mclk; /* * MRS_CYC = max(tMRD, tMOD) * tMRD = 8nCK, tMOD = max(24nCK, 15ns) */ - tmrd_mclk = max(24U, picos_to_mclk(15000)); + tmrd_mclk = max(24U, picos_to_mclk(ctrl_num, 15000)); #elif defined(CONFIG_SYS_FSL_DDR3) - unsigned int data_rate = get_ddr_freq(0); + unsigned int data_rate = get_ddr_freq(ctrl_num); int txp; unsigned int ip_rev; int odt_overlap; @@ -344,7 +345,8 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, * tMRD = 4nCK (8nCK for RDIMM) * tMOD = max(12nCK, 15ns) */ - tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000)); + tmrd_mclk = max((unsigned int)12, + picos_to_mclk(ctrl_num, 15000)); } else { /* * MRS_CYC = tMRD @@ -388,7 +390,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, taxpd_mclk = 1; } else { /* act_pd_exit_mclk = tXARD, see above */ - act_pd_exit_mclk = picos_to_mclk(txp); + act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp); /* Mode register MR0[A12] is '1' - fast exit */ pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 1; @@ -424,11 +426,12 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, #endif /* !defined(CONFIG_SYS_FSL_DDR1) */ /* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ -static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) +static void set_timing_cfg_3(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency, + unsigned int additive_latency) { /* Extended precharge to activate interval (tRP) */ unsigned int ext_pretoact = 0; @@ -447,18 +450,18 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, /* Control Adjust */ unsigned int cntl_adj = 0; - ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4; - ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4; - ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4; + ext_pretoact = picos_to_mclk(ctrl_num, common_dimm->trp_ps) >> 4; + ext_acttopre = picos_to_mclk(ctrl_num, common_dimm->tras_ps) >> 4; + ext_acttorw = picos_to_mclk(ctrl_num, common_dimm->trcd_ps) >> 4; ext_caslat = (2 * cas_latency - 1) >> 4; ext_add_lat = additive_latency >> 4; #ifdef CONFIG_SYS_FSL_DDR4 - ext_refrec = (picos_to_mclk(common_dimm->trfc1_ps) - 8) >> 4; + ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8) >> 4; #else - ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4; + ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ #endif - ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) + + ext_wrrec = (picos_to_mclk(ctrl_num, common_dimm->twr_ps) + (popts->otf_burst_chop_en ? 2 : 0)) >> 4; ddr->timing_cfg_3 = (0 @@ -475,10 +478,11 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */ -static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency) +static void set_timing_cfg_1(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency) { /* Precharge-to-activate interval (tRP) */ unsigned char pretoact_mclk; @@ -510,9 +514,9 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, 1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0}; #endif - pretoact_mclk = picos_to_mclk(common_dimm->trp_ps); - acttopre_mclk = picos_to_mclk(common_dimm->tras_ps); - acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps); + pretoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trp_ps); + acttopre_mclk = picos_to_mclk(ctrl_num, common_dimm->tras_ps); + acttorw_mclk = picos_to_mclk(ctrl_num, common_dimm->trcd_ps); /* * Translate CAS Latency to a DDR controller field value: @@ -547,19 +551,19 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, #endif #ifdef CONFIG_SYS_FSL_DDR4 - refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8; - wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); - acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4U); - wrtord_mclk = max(2U, picos_to_mclk(2500)); + refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8; + wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); + acttoact_mclk = max(picos_to_mclk(ctrl_num, common_dimm->trrds_ps), 4U); + wrtord_mclk = max(2U, picos_to_mclk(ctrl_num, 2500)); if ((wrrec_mclk < 1) || (wrrec_mclk > 24)) printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); else wrrec_mclk = wrrec_table[wrrec_mclk - 1]; #else - refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8; - wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); - acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps); - wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps); + refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8; + wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); + acttoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trrd_ps); + wrtord_mclk = picos_to_mclk(ctrl_num, common_dimm->twtr_ps); if ((wrrec_mclk < 1) || (wrrec_mclk > 16)) printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); else @@ -602,11 +606,12 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */ -static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) +static void set_timing_cfg_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency, + unsigned int additive_latency) { /* Additive latency */ unsigned char add_lat_mclk; @@ -623,7 +628,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, /* Window for four activates (tFAW) */ unsigned short four_act; #ifdef CONFIG_SYS_FSL_DDR3 - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #endif /* FIXME add check that this must be less than acttorw_mclk */ @@ -641,13 +646,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, #elif defined(CONFIG_SYS_FSL_DDR2) wr_lat = cas_latency - 1; #else - wr_lat = compute_cas_write_latency(); + wr_lat = compute_cas_write_latency(ctrl_num); #endif #ifdef CONFIG_SYS_FSL_DDR4 - rd_to_pre = picos_to_mclk(7500); + rd_to_pre = picos_to_mclk(ctrl_num, 7500); #else - rd_to_pre = picos_to_mclk(common_dimm->trtp_ps); + rd_to_pre = picos_to_mclk(ctrl_num, common_dimm->trtp_ps); #endif /* * JEDEC has some min requirements for tRTP @@ -665,19 +670,20 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, wr_data_delay = popts->write_data_delay; #ifdef CONFIG_SYS_FSL_DDR4 cpo = 0; - cke_pls = max(3U, picos_to_mclk(5000)); + cke_pls = max(3U, picos_to_mclk(ctrl_num, 5000)); #elif defined(CONFIG_SYS_FSL_DDR3) /* * cke pulse = max(3nCK, 7.5ns) for DDR3-800 * max(3nCK, 5.625ns) for DDR3-1066, 1333 * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 */ - cke_pls = max(3U, picos_to_mclk(mclk_ps > 1870 ? 7500 : - (mclk_ps > 1245 ? 5625 : 5000))); + cke_pls = max(3U, picos_to_mclk(ctrl_num, mclk_ps > 1870 ? 7500 : + (mclk_ps > 1245 ? 5625 : 5000))); #else cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR; #endif - four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps); + four_act = picos_to_mclk(ctrl_num, + popts->tfaw_window_four_activates_ps); ddr->timing_cfg_2 = (0 | ((add_lat_mclk & 0xf) << 28) @@ -818,7 +824,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */ -static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const unsigned int unq_mrs_en) { @@ -865,7 +872,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, #endif #if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) - slow = get_ddr_freq(0) < 1249000000; + slow = get_ddr_freq(ctrl_num) < 1249000000; #endif if (popts->registered_dimm_en) { @@ -915,7 +922,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -926,10 +934,10 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned int wr_crc = 0; /* Disable */ unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ - unsigned int cwl = compute_cas_write_latency() - 9; + unsigned int cwl = compute_cas_write_latency(ctrl_num) - 9; unsigned int mpr = 0; /* serial */ unsigned int wc_lat; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (popts->rtt_override) rtt_wr = popts->rtt_wr_override_value; @@ -1002,7 +1010,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, } #elif defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1013,7 +1022,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ unsigned int asr = 0; /* auto self-refresh disable */ - unsigned int cwl = compute_cas_write_latency() - 5; + unsigned int cwl = compute_cas_write_latency(ctrl_num) - 5; unsigned int pasr = 0; /* partial array self refresh disable */ if (popts->rtt_override) @@ -1077,7 +1086,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, #else /* for DDR2 and DDR1 */ /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1144,7 +1154,8 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */ -static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_10(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1152,7 +1163,7 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, int i; unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */ unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */ - unsigned int tccdl_min = picos_to_mclk(common_dimm->tccdl_ps); + unsigned int tccdl_min = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps); esdmode6 = ((tccdl_min - 4) & 0x7) << 10; @@ -1196,14 +1207,15 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, #endif /* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */ -static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm) +static void set_ddr_sdram_interval(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm) { unsigned int refint; /* Refresh interval */ unsigned int bstopre; /* Precharge interval */ - refint = picos_to_mclk(common_dimm->refresh_rate_ps); + refint = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps); bstopre = popts->bstopre; @@ -1217,7 +1229,8 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1292,7 +1305,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, * 1=fast exit DLL on (tXP) */ - wr_mclk = picos_to_mclk(common_dimm->twr_ps); + wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); if (wr_mclk <= 24) { wr = wr_table[wr_mclk - 10]; } else { @@ -1387,7 +1400,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #elif defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1466,7 +1480,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ dll_on = 1; - wr_mclk = picos_to_mclk(common_dimm->twr_ps); + wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); if (wr_mclk <= 16) { wr = wr_table[wr_mclk - 5]; } else { @@ -1582,7 +1596,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #else /* !CONFIG_SYS_FSL_DDR3 */ /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1654,7 +1669,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_SYS_FSL_DDR1) wr = 0; /* Historical */ #elif defined(CONFIG_SYS_FSL_DDR2) - wr = picos_to_mclk(common_dimm->twr_ps); + wr = picos_to_mclk(ctrl_num, common_dimm->twr_ps); #endif dll_res = 0; mode = 0; @@ -1842,15 +1857,16 @@ static void set_timing_cfg_6(fsl_ddr_cfg_regs_t *ddr) debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6); } -static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr, - const common_timing_params_t *common_dimm) +static void set_timing_cfg_7(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const common_timing_params_t *common_dimm) { unsigned int txpr, tcksre, tcksrx; unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd; - txpr = max(5U, picos_to_mclk(common_dimm->trfc1_ps + 10000)); - tcksre = max(5U, picos_to_mclk(10000)); - tcksrx = max(5U, picos_to_mclk(10000)); + txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000)); + tcksre = max(5U, picos_to_mclk(ctrl_num, 10000)); + tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000)); par_lat = 0; cs_to_cmd = 0; @@ -1883,14 +1899,15 @@ static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7); } -static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, +static void set_timing_cfg_8(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency) { unsigned int rwt_bg, wrt_bg, rrt_bg, wwt_bg; unsigned int acttoact_bg, wrtord_bg, pre_all_rec; - unsigned int tccdl = picos_to_mclk(common_dimm->tccdl_ps); + unsigned int tccdl = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps); unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + ((ddr->timing_cfg_2 & 0x00040000) >> 14); @@ -1911,11 +1928,11 @@ static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, wwt_bg = tccdl - 4; } else { rrt_bg = tccdl - 2; - wwt_bg = tccdl - 4; + wwt_bg = tccdl - 2; } - acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps); - wrtord_bg = max(4U, picos_to_mclk(7500)); + acttoact_bg = picos_to_mclk(ctrl_num, common_dimm->trrdl_ps); + wrtord_bg = max(4U, picos_to_mclk(ctrl_num, 7500)); if (popts->otf_burst_chop_en) wrtord_bg += 2; @@ -2147,7 +2164,8 @@ check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) } unsigned int -compute_fsl_memctl_config_regs(const memctl_options_t *popts, +compute_fsl_memctl_config_regs(const unsigned int ctrl_num, + const memctl_options_t *popts, fsl_ddr_cfg_regs_t *ddr, const common_timing_params_t *common_dimm, const dimm_params_t *dimm_params, @@ -2319,14 +2337,14 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_SYS_FSL_DDR1) - set_timing_cfg_0(ddr, popts, dimm_params); + set_timing_cfg_0(ctrl_num, ddr, popts, dimm_params); #endif - set_timing_cfg_3(ddr, popts, common_dimm, cas_latency, + set_timing_cfg_3(ctrl_num, ddr, popts, common_dimm, cas_latency, additive_latency); - set_timing_cfg_1(ddr, popts, common_dimm, cas_latency); - set_timing_cfg_2(ddr, popts, common_dimm, - cas_latency, additive_latency); + set_timing_cfg_1(ctrl_num, ddr, popts, common_dimm, cas_latency); + set_timing_cfg_2(ctrl_num, ddr, popts, common_dimm, + cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); set_ddr_cdr2(ddr, popts); @@ -2338,15 +2356,15 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if ((ip_rev > 0x40700) && (popts->cswl_override != 0)) ddr->debug[18] = popts->cswl_override; - set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en); - set_ddr_sdram_mode(ddr, popts, common_dimm, - cas_latency, additive_latency, unq_mrs_en); - set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en); + set_ddr_sdram_cfg_2(ctrl_num, ddr, popts, unq_mrs_en); + set_ddr_sdram_mode(ctrl_num, ddr, popts, common_dimm, + cas_latency, additive_latency, unq_mrs_en); + set_ddr_sdram_mode_2(ctrl_num, ddr, popts, common_dimm, unq_mrs_en); #ifdef CONFIG_SYS_FSL_DDR4 set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en); - set_ddr_sdram_mode_10(ddr, popts, common_dimm, unq_mrs_en); + set_ddr_sdram_mode_10(ctrl_num, ddr, popts, common_dimm, unq_mrs_en); #endif - set_ddr_sdram_interval(ddr, popts, common_dimm); + set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm); set_ddr_data_init(ddr); set_ddr_sdram_clk_cntl(ddr, popts); set_ddr_init_addr(ddr); @@ -2356,8 +2374,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, #ifdef CONFIG_SYS_FSL_DDR4 set_ddr_sdram_cfg_3(ddr, popts); set_timing_cfg_6(ddr); - set_timing_cfg_7(ddr, common_dimm); - set_timing_cfg_8(ddr, popts, common_dimm, cas_latency); + set_timing_cfg_7(ctrl_num, ddr, common_dimm); + set_timing_cfg_8(ctrl_num, ddr, popts, common_dimm, cas_latency); set_timing_cfg_9(ddr); set_ddr_dq_mapping(ddr, dimm_params); #endif @@ -2372,7 +2390,11 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, #ifdef CONFIG_SYS_FSL_DDR_EMU /* disble DDR training for emulator */ ddr->debug[2] = 0x00000400; - ddr->debug[4] = 0xff800000; + ddr->debug[4] = 0xff800800; + ddr->debug[5] = 0x08000800; + ddr->debug[6] = 0x08000800; + ddr->debug[7] = 0x08000800; + ddr->debug[8] = 0x08000800; #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004508 if ((ip_rev >= 0x40000) && (ip_rev < 0x40400)) diff --git a/drivers/ddr/fsl/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c index 7df27b90b7..7f1c3afcc4 100644 --- a/drivers/ddr/fsl/ddr1_dimm_params.c +++ b/drivers/ddr/fsl/ddr1_dimm_params.c @@ -228,10 +228,10 @@ compute_derated_DDR1_CAS_latency(unsigned int mclk_ps) * * FIXME: use #define for the retvals */ -unsigned int -ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr1_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; @@ -311,16 +311,16 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, & ~(1 << pdimm->caslat_x_minus_1)); /* Compute CAS latencies below that defined by SPD */ - pdimm->caslat_lowest_derated - = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps()); + pdimm->caslat_lowest_derated = compute_derated_DDR1_CAS_latency( + get_memory_clk_period_ps(ctrl_num)); /* Compute timing parameters */ pdimm->trcd_ps = spd->trcd * 250; pdimm->trp_ps = spd->trp * 250; pdimm->tras_ps = spd->tras * 1000; - pdimm->twr_ps = mclk_to_picos(3); - pdimm->twtr_ps = mclk_to_picos(1); + pdimm->twr_ps = mclk_to_picos(ctrl_num, 3); + pdimm->twtr_ps = mclk_to_picos(ctrl_num, 1); pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc); pdimm->trrd_ps = spd->trrd * 250; @@ -335,7 +335,7 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, pdimm->tdh_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); - pdimm->trtp_ps = mclk_to_picos(2); /* By the book. */ + pdimm->trtp_ps = mclk_to_picos(ctrl_num, 2); /* By the book. */ pdimm->tdqsq_max_ps = spd->tdqsq * 10; pdimm->tqhs_ps = spd->tqhs * 10; diff --git a/drivers/ddr/fsl/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c index d865df78a8..49cc1a07ff 100644 --- a/drivers/ddr/fsl/ddr2_dimm_params.c +++ b/drivers/ddr/fsl/ddr2_dimm_params.c @@ -211,10 +211,10 @@ compute_derated_DDR2_CAS_latency(unsigned int mclk_ps) * * FIXME: use #define for the retvals */ -unsigned int -ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr2_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; @@ -310,8 +310,8 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, & ~(1 << pdimm->caslat_x_minus_1)); /* Compute CAS latencies below that defined by SPD */ - pdimm->caslat_lowest_derated - = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps()); + pdimm->caslat_lowest_derated = compute_derated_DDR2_CAS_latency( + get_memory_clk_period_ps(ctrl_num)); /* Compute timing parameters */ pdimm->trcd_ps = spd->trcd * 250; diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c index a4b8c101f5..69177150ec 100644 --- a/drivers/ddr/fsl/ddr3_dimm_params.c +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -83,10 +83,10 @@ compute_ranksize(const ddr3_spd_eeprom_t *spd) * Writes the results to the dimm_params_t structure pointed by pdimm. * */ -unsigned int -ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr3_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; unsigned int mtb_ps; diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index aaddc8fa08..bbfb4ee417 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -119,10 +119,10 @@ compute_ranksize(const struct ddr4_spd_eeprom_s *spd) * Writes the results to the dimm_params_t structure pointed by pdimm. * */ -unsigned int -ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const generic_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; int i; diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index 4eef047343..d9fce7d2f3 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -32,24 +32,44 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, u32 temp_sdram_cfg; u32 total_gb_size_per_controller; int timeout; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + u32 *eddrtqcr1; +#endif switch (ctrl_num) { case 0: ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800; +#endif break; #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800; +#endif break; #endif #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800; +#endif break; #endif #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR4_ADDR + 0x800; +#endif break; #endif default: @@ -60,6 +80,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, if (step == 2) goto step2; +#ifdef CONFIG_SYS_FSL_ERRATUM_A008336 +#ifdef CONFIG_LS2085A + /* A008336 only applies to general DDR controllers */ + if ((ctrl_num == 0) || (ctrl_num == 1)) +#endif + ddr_out32(eddrtqcr1, 0x63b30002); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A008514 +#ifdef CONFIG_LS2085A + /* A008514 only applies to DP-DDR controler */ + if (ctrl_num == 2) +#endif + ddr_out32(eddrtqcr1, 0x63b20002); +#endif if (regs->ddr_eor) ddr_out32(&ddr->eor, regs->ddr_eor); @@ -253,7 +287,7 @@ step2: bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 2; + (get_ddr_freq(ctrl_num) >> 20)) << 2; total_gb_size_per_controller >>= 4; /* shift down to gb size */ debug("total %d GB\n", total_gb_size_per_controller); debug("Need to wait up to %d * 10ms\n", timeout); diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index 73db444615..b295344c4d 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -13,7 +13,8 @@ #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) static unsigned int -compute_cas_latency(const dimm_params_t *dimm_params, +compute_cas_latency(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) { @@ -22,7 +23,7 @@ compute_cas_latency(const dimm_params_t *dimm_params, unsigned int caslat_actual; unsigned int retry = 16; unsigned int tmp; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #ifdef CONFIG_SYS_FSL_DDR3 const unsigned int taamax = 20000; #else @@ -72,12 +73,13 @@ compute_cas_latency(const dimm_params_t *dimm_params, } #else /* for DDR1 and DDR2 */ static unsigned int -compute_cas_latency(const dimm_params_t *dimm_params, +compute_cas_latency(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) { int i; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); unsigned int lowest_good_caslat; unsigned int not_ok; unsigned int temp1, temp2; @@ -212,7 +214,8 @@ compute_cas_latency(const dimm_params_t *dimm_params, * by dimm_params. */ unsigned int -compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, +compute_lowest_common_dimm_parameters(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, const unsigned int number_of_dimms) { @@ -442,7 +445,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, printf("ERROR: Mix different RDIMM detected!\n"); /* calculate cas latency for all DDR types */ - if (compute_cas_latency(dimm_params, outpdimm, number_of_dimms)) + if (compute_cas_latency(ctrl_num, dimm_params, + outpdimm, number_of_dimms)) return 1; /* Determine if all DIMMs ECC capable. */ @@ -518,11 +522,12 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, #if defined(CONFIG_SYS_FSL_DDR2) if ((outpdimm->lowest_common_spd_caslat < 4) && - (picos_to_mclk(trcd_ps) > outpdimm->lowest_common_spd_caslat)) { - additive_latency = picos_to_mclk(trcd_ps) - + (picos_to_mclk(ctrl_num, trcd_ps) > + outpdimm->lowest_common_spd_caslat)) { + additive_latency = picos_to_mclk(ctrl_num, trcd_ps) - outpdimm->lowest_common_spd_caslat; - if (mclk_to_picos(additive_latency) > trcd_ps) { - additive_latency = picos_to_mclk(trcd_ps); + if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) { + additive_latency = picos_to_mclk(ctrl_num, trcd_ps); debug("setting additive_latency to %u because it was " " greater than tRCD_ps\n", additive_latency); } @@ -534,7 +539,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, * * AL <= tRCD(min) */ - if (mclk_to_picos(additive_latency) > trcd_ps) { + if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) { printf("Error: invalid additive latency exceeds tRCD(min).\n"); return 1; } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 6f291ebc03..b72b24290e 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -450,7 +450,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, &(pinfo->spd_installed_dimms[i][j]); dimm_params_t *pdimm = &(pinfo->dimm_params[i][j]); - retval = compute_dimm_parameters(spd, pdimm, i); + retval = compute_dimm_parameters( + i, spd, pdimm, j); #ifdef CONFIG_SYS_DDR_RAW_TIMING if (!i && !j && retval) { printf("SPD error on controller %d! " @@ -507,10 +508,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, for (i = first_ctrl; i <= last_ctrl; i++) { debug("Computing lowest common DIMM" " parameters for memctl=%u\n", i); - compute_lowest_common_dimm_parameters( - pinfo->dimm_params[i], - &timing_params[i], - CONFIG_DIMM_SLOTS_PER_CTLR); + compute_lowest_common_dimm_parameters + (i, + pinfo->dimm_params[i], + &timing_params[i], + CONFIG_DIMM_SLOTS_PER_CTLR); } case STEP_GATHER_OPTS: @@ -562,12 +564,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, continue; } - compute_fsl_memctl_config_regs( - &pinfo->memctl_opts[i], - &ddr_reg[i], &timing_params[i], - pinfo->dimm_params[i], - dbw_capacity_adjust[i], - size_only); + compute_fsl_memctl_config_regs + (i, + &pinfo->memctl_opts[i], + &ddr_reg[i], &timing_params[i], + pinfo->dimm_params[i], + dbw_capacity_adjust[i], + size_only); } default: @@ -689,6 +692,10 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) } } +#ifdef CONFIG_FSL_DDR_SYNC_REFRESH + fsl_ddr_sync_memctl_refresh(first_ctrl, last_ctrl); +#endif + #ifdef CONFIG_PPC /* program LAWs */ for (i = first_ctrl; i <= last_ctrl; i++) { diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index 8f4d01ad85..6752d4d29e 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -426,7 +426,7 @@ step2: bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 1; + (get_ddr_freq(ctrl_num) >> 20)) << 1; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 timeout_save = timeout; #endif @@ -538,12 +538,14 @@ step2: case 1: out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds); break; +#if CONFIG_CHIP_SELECTS_PER_CTRL > 2 case 2: out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds); break; case 3: out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds); break; +#endif } clrbits_be32(&ddr->sdram_cfg, 0x2); } diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 6d098d1fa2..5beb11b02b 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -732,7 +732,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, #endif /* Global Timing Parameters. */ - debug("mclk_ps = %u ps\n", get_memory_clk_period_ps()); + debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num)); /* Pick a caslat override. */ popts->cas_latency_override = 0; @@ -785,7 +785,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, * FIXME: width, was considering looking at pdimm->primary_sdram_width */ #if defined(CONFIG_SYS_FSL_DDR1) - popts->tfaw_window_four_activates_ps = mclk_to_picos(1); + popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1); #elif defined(CONFIG_SYS_FSL_DDR2) /* @@ -1036,7 +1036,7 @@ done: if (pdimm[0].n_ranks == 4) popts->quad_rank_present = 1; - ddr_freq = get_ddr_freq(0) / 1000000; + ddr_freq = get_ddr_freq(ctrl_num) / 1000000; if (popts->registered_dimm_en) { popts->rcw_override = 1; popts->rcw_1 = 0x000a5a00; diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 58b519b403..664081b1b8 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -43,9 +43,9 @@ u32 fsl_ddr_get_version(void) * propagation, compute a suitably rounded mclk_ps to compute * a working memory controller configuration. */ -unsigned int get_memory_clk_period_ps(void) +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num) { - unsigned int data_rate = get_ddr_freq(0); + unsigned int data_rate = get_ddr_freq(ctrl_num); unsigned int result; /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ @@ -59,10 +59,10 @@ unsigned int get_memory_clk_period_ps(void) } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ -unsigned int picos_to_mclk(unsigned int picos) +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos) { unsigned long long clks, clks_rem; - unsigned long data_rate = get_ddr_freq(0); + unsigned long data_rate = get_ddr_freq(ctrl_num); /* Short circuit for zero picos */ if (!picos) @@ -88,9 +88,9 @@ unsigned int picos_to_mclk(unsigned int picos) return (unsigned int) clks; } -unsigned int mclk_to_picos(unsigned int mclk) +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk) { - return get_memory_clk_period_ps() * mclk; + return get_memory_clk_period_ps(ctrl_num) * mclk; } #ifdef CONFIG_PPC @@ -308,3 +308,58 @@ void board_add_ram_info(int use_default) { detail_board_ddr_info(); } + +#ifdef CONFIG_FSL_DDR_SYNC_REFRESH +#define DDRC_DEBUG20_INIT_DONE 0x80000000 +#define DDRC_DEBUG2_RF 0x00000040 +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl) +{ + unsigned int i; + u32 ddrc_debug20; + u32 ddrc_debug2[CONFIG_NUM_DDR_CONTROLLERS] = {}; + u32 *ddrc_debug2_p[CONFIG_NUM_DDR_CONTROLLERS] = {}; + struct ccsr_ddr __iomem *ddr; + + for (i = first_ctrl; i <= last_ctrl; i++) { + switch (i) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl = %u\n", __func__, i); + return; + } + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + ddrc_debug2_p[i] = &ddr->debug[1]; + while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) { + /* keep polling until DDRC init is done */ + udelay(100); + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + } + ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF; + } + /* + * Sync refresh + * This is put together to make sure the refresh reqeusts are sent + * closely to each other. + */ + for (i = first_ctrl; i <= last_ctrl; i++) + ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]); +} +#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */ diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index c55eb28217..f5d2ccba15 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -319,7 +319,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) esdhc_write32(®s->cmdarg, cmd->cmdarg); #if defined(CONFIG_FSL_USDHC) esdhc_write32(®s->mixctrl, - (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F)); + (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F) + | (mmc->ddr_mode ? XFERTYP_DDREN : 0)); esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000); #else esdhc_write32(®s->xfertyp, xfertyp); @@ -442,7 +443,7 @@ static void set_sysctl(struct mmc *mmc, uint clock) if ((sdhc_clk / (div * pre_div)) <= clock) break; - pre_div >>= 1; + pre_div >>= mmc->ddr_mode ? 2 : 1; div -= 1; clk = (pre_div << 8) | (div << 4); @@ -601,6 +602,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) } cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC; +#ifdef CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE + cfg->cfg.host_caps |= MMC_MODE_DDR_52MHz; +#endif if (cfg->max_bus_width > 0) { if (cfg->max_bus_width < 8) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c24221499b..72825c3e2e 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -6,8 +6,6 @@ config SYS_NAND_SELF_INIT This option, if enabled, provides more flexible and linux-like NAND initialization process. -if !SPL_BUILD - config NAND_DENALI bool "Support Denali NAND controller" select SYS_NAND_SELF_INIT @@ -34,9 +32,7 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES of OOB area before last ECC sector data starts. This is potentially used to preserve the bad block marker in the OOB area. -endif - -if SPL_BUILD +if SPL config SPL_NAND_DENALI bool "Support Denali NAND controller for SPL" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 46c4ac697d..b8b08034eb 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o -obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_MACB) += macb.o @@ -65,5 +64,5 @@ obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \ xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o -obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/ +obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ obj-$(CONFIG_VSC9953) += vsc9953.o diff --git a/drivers/net/fsl_mc/Makefile b/drivers/net/fsl-mc/Makefile index 483408623c..206ac6be07 100644 --- a/drivers/net/fsl_mc/Makefile +++ b/drivers/net/fsl-mc/Makefile @@ -5,4 +5,6 @@ # # Layerscape MC driver -obj-y += mc.o +obj-y += mc.o \ + mc_sys.o \ + dpmng.o diff --git a/drivers/net/fsl-mc/dpmng.c b/drivers/net/fsl-mc/dpmng.c new file mode 100644 index 0000000000..cc14c7b755 --- /dev/null +++ b/drivers/net/fsl-mc/dpmng.c @@ -0,0 +1,91 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <fsl-mc/fsl_mc_sys.h> +#include <fsl-mc/fsl_mc_cmd.h> +#include <fsl-mc/fsl_dpmng.h> +#include "fsl_dpmng_cmd.h" + +int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info) +{ + struct mc_command cmd = { 0 }; + int err; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_GET_VERSION, + MC_CMD_PRI_LOW, 0); + + /* send command to mc*/ + err = mc_send_command(mc_io, &cmd); + if (err) + return err; + + /* retrieve response parameters */ + DPMNG_RSP_GET_VERSION(cmd, mc_ver_info); + + return 0; +} + +int dpmng_reset_aiop(struct fsl_mc_io *mc_io, int container_id, + int aiop_tile_id) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_AIOP, + MC_CMD_PRI_LOW, 0); + DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_load_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + uint64_t img_iova, + uint32_t img_size) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_LOAD_AIOP, + MC_CMD_PRI_LOW, + 0); + DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size, + img_iova); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_run_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + const struct dpmng_aiop_run_cfg *cfg) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RUN_AIOP, + MC_CMD_PRI_LOW, + 0); + DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_MC_PORTAL, + MC_CMD_PRI_LOW, + 0); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} diff --git a/drivers/net/fsl-mc/fsl_dpmng_cmd.h b/drivers/net/fsl-mc/fsl_dpmng_cmd.h new file mode 100644 index 0000000000..c9fe021f45 --- /dev/null +++ b/drivers/net/fsl-mc/fsl_dpmng_cmd.h @@ -0,0 +1,49 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __FSL_DPMNG_CMD_H +#define __FSL_DPMNG_CMD_H + +/* Command IDs */ +#define DPMNG_CMDID_GET_VERSION 0x831 +#define DPMNG_CMDID_RESET_AIOP 0x832 +#define DPMNG_CMDID_LOAD_AIOP 0x833 +#define DPMNG_CMDID_RUN_AIOP 0x834 +#define DPMNG_CMDID_RESET_MC_PORTAL 0x835 + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_RSP_GET_VERSION(cmd, mc_ver_info) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mc_ver_info->revision); \ + MC_RSP_OP(cmd, 0, 32, 32, uint32_t, mc_ver_info->major); \ + MC_RSP_OP(cmd, 1, 0, 32, uint32_t, mc_ver_info->minor); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size, \ + img_iova) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, img_size); \ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, img_iova); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->cores_mask); \ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options); \ +} while (0) + +#endif /* __FSL_DPMNG_CMD_H */ diff --git a/drivers/net/fsl_mc/mc.c b/drivers/net/fsl-mc/mc.c index df84568a94..74b0085301 100644 --- a/drivers/net/fsl_mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -3,9 +3,12 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include <errno.h> #include <asm/io.h> -#include <fsl_mc.h> +#include <fsl-mc/fsl_mc.h> +#include <fsl-mc/fsl_mc_sys.h> +#include <fsl-mc/fsl_dpmng.h> DECLARE_GLOBAL_DATA_PTR; static int mc_boot_status; @@ -14,7 +17,7 @@ static int mc_boot_status; * Copying MC firmware or DPL image to DDR */ static int mc_copy_image(const char *title, - u64 image_addr, u32 image_size, u64 mc_ram_addr) + u64 image_addr, u32 image_size, u64 mc_ram_addr) { debug("%s copied to address %p\n", title, (void *)mc_ram_addr); memcpy((void *)mc_ram_addr, (void *)image_addr, image_size); @@ -25,10 +28,9 @@ static int mc_copy_image(const char *title, * MC firmware FIT image parser checks if the image is in FIT * format, verifies integrity of the image and calculates * raw image address and size values. - * Returns 0 if success and 1 if any of the above mentioned + * Returns 0 on success and a negative errno on error. * task fail. **/ - int parse_mc_firmware_fit_image(const void **raw_image_addr, size_t *raw_image_size) { @@ -39,7 +41,7 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, size_t size; const char *uname = "firmware"; - /* Check if the image is in NOR flash*/ + /* Check if the image is in NOR flash */ #ifdef CONFIG_SYS_LS_MC_FW_IN_NOR fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR; #else @@ -50,26 +52,26 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, format = genimg_get_format(fit_hdr); if (format != IMAGE_FORMAT_FIT) { - debug("Not a FIT image\n"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n"); + return -EINVAL; } if (!fit_check_format(fit_hdr)) { - debug("Bad FIT image format\n"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n"); + return -EINVAL; } node_offset = fit_image_get_node(fit_hdr, uname); if (node_offset < 0) { - debug("Can not find %s subimage\n", uname); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n"); + return -ENOENT; } /* Verify MC firmware image */ if (!(fit_image_verify(fit_hdr, node_offset))) { - debug("Bad MC firmware hash"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n"); + return -EINVAL; } /* Get address and size of raw image */ @@ -90,12 +92,13 @@ int mc_init(bd_t *bis) u64 mc_dpl_offset; u32 reg_gsr; u32 mc_fw_boot_status; - void *fdt_hdr; + void *dpl_fdt_hdr; int dpl_size; const void *raw_image_addr; size_t raw_image_size = 0; - - BUILD_BUG_ON(CONFIG_SYS_LS_MC_FW_LENGTH % 4 != 0); + struct fsl_mc_io mc_io; + int portal_id; + struct mc_version mc_ver_info; /* * The MC private DRAM block was already carved at the end of DRAM @@ -130,25 +133,44 @@ int mc_init(bd_t *bis) /* * Load the MC FW at the beginning of the MC private DRAM block: */ - mc_copy_image( - "MC Firmware", - (u64)raw_image_addr, - raw_image_size, - mc_ram_addr); + mc_copy_image("MC Firmware", + (u64)raw_image_addr, raw_image_size, mc_ram_addr); + + /* + * Get address and size of the DPL blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR + dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" +#endif + + error = fdt_check_header(dpl_fdt_hdr); + if (error != 0) { + printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); + goto out; + } + + dpl_size = fdt_totalsize(dpl_fdt_hdr); + if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", + dpl_size); + error = -EINVAL; + goto out; + } /* * Calculate offset in the MC private DRAM block at which the MC DPL * blob is to be placed: */ #ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET - BUILD_BUG_ON( - (CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; #else mc_dpl_offset = mc_get_dram_block_size() - - roundup(CONFIG_SYS_LS_MC_DPL_LENGTH, 4096); + roundup(CONFIG_SYS_LS_MC_DPL_MAX_LENGTH, 4096); if ((mc_dpl_offset & 0x3) != 0 || mc_dpl_offset > 0xffffffff) { printf("%s: Invalid MC DPL offset: %llu\n", @@ -158,23 +180,14 @@ int mc_init(bd_t *bis) } #endif - /* Check if DPL image is in NOR flash */ -#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR - fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; -#else -#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" -#endif - - dpl_size = fdt_totalsize(fdt_hdr); - /* * Load the MC DPL blob at the far end of the MC private DRAM block: + * + * TODO: Should we place the DPL at a different location to match + * assumptions of MC firmware about its memory layout? */ - mc_copy_image( - "MC DPL blob", - (u64)fdt_hdr, - dpl_size, - mc_ram_addr + mc_dpl_offset); + mc_copy_image("MC DPL blob", + (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); debug("mc_ccsr_regs %p\n", mc_ccsr_regs); @@ -200,6 +213,8 @@ int mc_init(bd_t *bis) */ out_le32(&mc_ccsr_regs->reg_gsr, (u32)(mc_dpl_offset >> 2)); + printf("\nfsl-mc: Booting Management Complex ...\n"); + /* * Deassert reset and release MC core 0 to run */ @@ -219,17 +234,13 @@ int mc_init(bd_t *bis) } if (timeout <= 0) { - printf("%s: timeout booting management complex firmware\n", - __func__); + printf("fsl-mc: timeout booting management complex firmware\n"); /* TODO: Get an error status from an MC CCSR register */ error = -ETIMEDOUT; goto out; } - printf("Management complex booted (boot status: %#x)\n", - mc_fw_boot_status); - if (mc_fw_boot_status != 0x1) { /* * TODO: Identify critical errors from the GSR register's FS @@ -237,8 +248,41 @@ int mc_init(bd_t *bis) * appropriate errno, so that the status property is set to * failure in the fsl,dprc device tree node. */ + printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", + reg_gsr); } + /* + * TODO: need to obtain the portal_id for the root container from the + * DPL + */ + portal_id = 0; + + /* + * Check that the MC firmware is responding portal commands: + */ + mc_io.mmio_regs = SOC_MC_PORTAL_ADDR(portal_id); + debug("Checking access to MC portal of root DPRC container (portal_id %d, portal physical addr %p)\n", + portal_id, mc_io.mmio_regs); + + error = mc_get_version(&mc_io, &mc_ver_info); + if (error != 0) { + printf("fsl-mc: ERROR: Firmware version check failed (error: %d)\n", + error); + goto out; + } + + if (MC_VER_MAJOR != mc_ver_info.major) + printf("fsl-mc: ERROR: Firmware major version mismatch (found: %d, expected: %d)\n", + mc_ver_info.major, MC_VER_MAJOR); + + if (MC_VER_MINOR != mc_ver_info.minor) + printf("fsl-mc: WARNING: Firmware minor version mismatch (found: %d, expected: %d)\n", + mc_ver_info.minor, MC_VER_MINOR); + + printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n", + mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision, + mc_fw_boot_status); out: if (error != 0) mc_boot_status = -error; diff --git a/drivers/net/fsl-mc/mc_sys.c b/drivers/net/fsl-mc/mc_sys.c new file mode 100644 index 0000000000..7c8e003ad0 --- /dev/null +++ b/drivers/net/fsl-mc/mc_sys.c @@ -0,0 +1,63 @@ +/* + * Freescale Layerscape MC I/O wrapper + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Author: German Rivera <German.Rivera@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <fsl-mc/fsl_mc_sys.h> +#include <fsl-mc/fsl_mc_cmd.h> +#include <common.h> +#include <errno.h> +#include <asm/io.h> + +#define MC_CMD_HDR_READ_CMDID(_hdr) \ + ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S)) + +/** + * mc_send_command - Send MC command and wait for response + * + * @mc_io: Pointer to MC I/O object to be used + * @cmd: MC command buffer. On input, it contains the command to send to the MC. + * On output, it contains the response from the MC if any. + * + * Depending on the sharing option specified when creating the MC portal + * wrapper, this function will use a spinlock or mutex to ensure exclusive + * access to the MC portal from the point when the command is sent until a + * response is received from the MC. + */ +int mc_send_command(struct fsl_mc_io *mc_io, + struct mc_command *cmd) +{ + enum mc_cmd_status status; + int timeout = 2000; + + mc_write_command(mc_io->mmio_regs, cmd); + + for ( ; ; ) { + status = mc_read_response(mc_io->mmio_regs, cmd); + if (status != MC_CMD_STATUS_READY) + break; + + if (--timeout == 0) { + printf("Error: Timeout waiting for MC response\n"); + return -ETIMEDOUT; + } + + udelay(500); + } + + if (status != MC_CMD_STATUS_OK) { + printf("Error: MC command failed (portal: %p, obj handle: %#x, command: %#x, status: %#x)\n", + mc_io->mmio_regs, + (unsigned int)MC_CMD_HDR_READ_AUTHID(cmd->header), + (unsigned int)MC_CMD_HDR_READ_CMDID(cmd->header), + (unsigned int)status); + + return -EIO; + } + + return 0; +} diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c deleted file mode 100644 index b4822e9504..0000000000 --- a/drivers/net/ks8695eth.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * ks8695eth.c -- KS8695 ethernet driver - * - * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/****************************************************************************/ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <asm/io.h> -#include <asm/arch/platform.h> - -/****************************************************************************/ - -/* - * Hardware register access to the KS8695 LAN ethernet port - * (well, it is the 4 port switch really). - */ -#define ks8695_read(a) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) -#define ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v) - -/****************************************************************************/ - -/* - * Define the descriptor in-memory data structures. - */ -struct ks8695_txdesc { - uint32_t owner; - uint32_t ctrl; - uint32_t addr; - uint32_t next; -}; - -struct ks8695_rxdesc { - uint32_t status; - uint32_t ctrl; - uint32_t addr; - uint32_t next; -}; - -/****************************************************************************/ - -/* - * Allocate local data structures to use for receiving and sending - * packets. Just to keep it all nice and simple. - */ - -#define TXDESCS 4 -#define RXDESCS 4 -#define BUFSIZE 2048 - -volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256))); -volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256))); -volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));; - -/****************************************************************************/ - -/* - * Ideally we want to use the MAC address stored in flash. - * But we do some sanity checks in case they are not present - * first. - */ -unsigned char eth_mac[] = { - 0x00, 0x13, 0xc6, 0x00, 0x00, 0x00 -}; - -void ks8695_getmac(void) -{ - unsigned char *fp; - int i; - - /* Check if flash MAC is valid */ - fp = (unsigned char *) 0x0201c000; - for (i = 0; (i < 6); i++) { - if ((fp[i] != 0) && (fp[i] != 0xff)) - break; - } - - /* If we found a valid looking MAC address then use it */ - if (i < 6) - memcpy(ð_mac[0], fp, 6); -} - -/****************************************************************************/ - -static int ks8695_eth_init(struct eth_device *dev, bd_t *bd) -{ - int i; - - debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__); - - /* Reset the ethernet engines first */ - ks8695_write(KS8695_LAN_DMA_TX, 0x80000000); - ks8695_write(KS8695_LAN_DMA_RX, 0x80000000); - - ks8695_getmac(); - - /* Set MAC address */ - ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) | - (eth_mac[3] << 16) | (eth_mac[2] << 24))); - ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8))); - - /* Turn the 4 port switch on */ - i = ks8695_read(KS8695_SWITCH_CTRL0); - ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1)); - /* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */ - - /* Initialize descriptor rings */ - for (i = 0; (i < TXDESCS); i++) { - ks8695_tx[i].owner = 0; - ks8695_tx[i].ctrl = 0; - ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE]; - ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1]; - } - ks8695_tx[TXDESCS-1].ctrl = 0x02000000; - ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0]; - - for (i = 0; (i < RXDESCS); i++) { - ks8695_rx[i].status = 0x80000000; - ks8695_rx[i].ctrl = BUFSIZE - 4; - ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE]; - ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1]; - } - ks8695_rx[RXDESCS-1].ctrl |= 0x00080000; - ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0]; - - /* The KS8695 is pretty slow reseting the ethernets... */ - udelay(2000000); - - /* Enable the ethernet engine */ - ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]); - ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]); - ks8695_write(KS8695_LAN_DMA_TX, 0x3); - ks8695_write(KS8695_LAN_DMA_RX, 0x71); - ks8695_write(KS8695_LAN_DMA_RX_START, 0x1); - - printf("KS8695 ETHERNET: %pM\n", eth_mac); - return 0; -} - -/****************************************************************************/ - -static void ks8695_eth_halt(struct eth_device *dev) -{ - debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__); - - /* Reset the ethernet engines */ - ks8695_write(KS8695_LAN_DMA_TX, 0x80000000); - ks8695_write(KS8695_LAN_DMA_RX, 0x80000000); -} - -/****************************************************************************/ - -static int ks8695_eth_recv(struct eth_device *dev) -{ - volatile struct ks8695_rxdesc *dp; - int i, len = 0; - - debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__); - - for (i = 0; (i < RXDESCS); i++) { - dp= &ks8695_rx[i]; - if ((dp->status & 0x80000000) == 0) { - len = (dp->status & 0x7ff) - 4; - NetReceive((void *) dp->addr, len); - dp->status = 0x80000000; - ks8695_write(KS8695_LAN_DMA_RX_START, 0x1); - break; - } - } - - return len; -} - -/****************************************************************************/ - -static int ks8695_eth_send(struct eth_device *dev, void *packet, int len) -{ - volatile struct ks8695_txdesc *dp; - static int next = 0; - - debug ("%s(%d): eth_send(packet=%p,len=%d)\n", __FILE__, __LINE__, - packet, len); - - dp = &ks8695_tx[next]; - memcpy((void *) dp->addr, (void *) packet, len); - - if (len < 64) { - memset((void *) (dp->addr + len), 0, 64-len); - len = 64; - } - - dp->ctrl = len | 0xe0000000; - dp->owner = 0x80000000; - - ks8695_write(KS8695_LAN_DMA_TX, 0x3); - ks8695_write(KS8695_LAN_DMA_TX_START, 0x1); - - if (++next >= TXDESCS) - next = 0; - - return 0; -} - -/****************************************************************************/ - -int ks8695_eth_initialize(void) -{ - struct eth_device *dev; - - dev = malloc(sizeof(*dev)); - if (dev == NULL) - return -1; - memset(dev, 0, sizeof(*dev)); - - dev->iobase = KS8695_IO_BASE + KS8695_LAN_DMA_TX; - dev->init = ks8695_eth_init; - dev->halt = ks8695_eth_halt; - dev->send = ks8695_eth_send; - dev->recv = ks8695_eth_recv; - strcpy(dev->name, "ks8695eth"); - - eth_register(dev); - return 0; -} diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 291c249c86..bcad8f2aec 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -1,5 +1,5 @@ /* - * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2014-2015 Freescale Semiconductor, Inc. * Layerscape PCIe driver * * SPDX-License-Identifier: GPL-2.0+ @@ -9,8 +9,465 @@ #include <asm/arch/fsl_serdes.h> #include <pci.h> #include <asm/io.h> +#include <errno.h> +#include <malloc.h> #include <asm/pcie_layerscape.h> +#ifndef CONFIG_SYS_PCI_MEMORY_BUS +#define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE +#endif + +#ifndef CONFIG_SYS_PCI_MEMORY_PHYS +#define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE +#endif + +#ifndef CONFIG_SYS_PCI_MEMORY_SIZE +#define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */ +#endif + +/* iATU registers */ +#define PCIE_ATU_VIEWPORT 0x900 +#define PCIE_ATU_REGION_INBOUND (0x1 << 31) +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0) +#define PCIE_ATU_CR1 0x904 +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_CR2 0x908 +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_LOWER_BASE 0x90C +#define PCIE_ATU_UPPER_BASE 0x910 +#define PCIE_ATU_LIMIT 0x914 +#define PCIE_ATU_LOWER_TARGET 0x918 +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) +#define PCIE_ATU_UPPER_TARGET 0x91C + +#define PCIE_LINK_CAP 0x7c +#define PCIE_LINK_SPEED_MASK 0xf +#define PCIE_LINK_STA 0x82 + +#define PCIE_DBI_SIZE (4 * 1024) /* 4K */ + +struct ls_pcie { + int idx; + void __iomem *dbi; + void __iomem *va_cfg0; + void __iomem *va_cfg1; + struct pci_controller hose; +}; + +struct ls_pcie_info { + unsigned long regs; + int pci_num; + u64 cfg0_phys; + u64 cfg0_size; + u64 cfg1_phys; + u64 cfg1_size; + u64 mem_bus; + u64 mem_phys; + u64 mem_size; + u64 io_bus; + u64 io_phys; + u64 io_size; +}; + +#define SET_LS_PCIE_INFO(x, num) \ +{ \ + x.regs = CONFIG_SYS_PCIE##num##_ADDR; \ + x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \ + x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \ + x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \ + x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \ + x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \ + x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \ + x.pci_num = num; \ +} + +#ifdef CONFIG_LS102XA +#include <asm/arch/immap_ls102xa.h> + +/* PEX1/2 Misc Ports Status Register */ +#define LTSSM_STATE_SHIFT 20 +#define LTSSM_STATE_MASK 0x3f +#define LTSSM_PCIE_L0 0x11 /* L0 state */ + +static int ls_pcie_link_state(struct ls_pcie *pcie) +{ + u32 state; + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + + state = in_be32(&scfg->pexmscportsr[pcie->idx]); + state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK; + if (state < LTSSM_PCIE_L0) { + debug("....PCIe link error. LTSSM=0x%02x.\n", state); + return 0; + } + + return 1; +} +#else +#define PCIE_LDBG 0x7FC + +static int ls_pcie_link_state(struct ls_pcie *pcie) +{ + u32 state; + + state = readl(pcie->dbi + PCIE_LDBG); + if (state) + return 1; + + debug("....PCIe link error.\n"); + return 0; +} +#endif + +static int ls_pcie_link_up(struct ls_pcie *pcie) +{ + int state; + u32 cap; + + state = ls_pcie_link_state(pcie); + if (state) + return state; + + /* Try to download speed to gen1 */ + cap = readl(pcie->dbi + PCIE_LINK_CAP); + writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP); + udelay(2000); + state = ls_pcie_link_state(pcie); + if (state) + return state; + + writel(cap, pcie->dbi + PCIE_LINK_CAP); + + return 0; +} + +static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev) +{ + writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, + pcie->dbi + PCIE_ATU_VIEWPORT); + writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); +} + +static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev) +{ + writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, + pcie->dbi + PCIE_ATU_VIEWPORT); + writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); +} + +static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type, + u64 phys, u64 bus_addr, pci_size_t size) +{ + writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT); + writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE); + writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE); + writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT); + writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET); + writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET); + writel(type, pcie->dbi + PCIE_ATU_CR1); + writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2); +} + +static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info) +{ +#ifdef DEBUG + int i; +#endif + + /* ATU 0 : OUTBOUND : CFG0 */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0, + PCIE_ATU_TYPE_CFG0, + info->cfg0_phys, + 0, + info->cfg0_size); + /* ATU 1 : OUTBOUND : CFG1 */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_CFG1, + info->cfg1_phys, + 0, + info->cfg1_size); + /* ATU 2 : OUTBOUND : MEM */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2, + PCIE_ATU_TYPE_MEM, + info->mem_phys, + info->mem_bus, + info->mem_size); + /* ATU 3 : OUTBOUND : IO */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3, + PCIE_ATU_TYPE_IO, + info->io_phys, + info->io_bus, + info->io_size); + +#ifdef DEBUG + for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) { + writel(PCIE_ATU_REGION_OUTBOUND | i, + pcie->dbi + PCIE_ATU_VIEWPORT); + debug("iATU%d:\n", i); + debug("\tLOWER PHYS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LOWER_BASE)); + debug("\tUPPER PHYS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_UPPER_BASE)); + debug("\tLOWER BUS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LOWER_TARGET)); + debug("\tUPPER BUS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_UPPER_TARGET)); + debug("\tLIMIT 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LIMIT)); + debug("\tCR1 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_CR1)); + debug("\tCR2 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_CR2)); + } +#endif +} + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + /* Do not skip controller */ + return 0; +} + +static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d) +{ + if (PCI_DEV(d) > 0) + return -EINVAL; + + return 0; +} + +static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 *val) +{ + struct ls_pcie *pcie = hose->priv_data; + u32 busdev, *addr; + + if (ls_pcie_addr_valid(hose, d)) { + *val = 0xffffffff; + return -EINVAL; + } + + if (PCI_BUS(d) == hose->first_busno) { + addr = pcie->dbi + (where & ~0x3); + } else { + busdev = PCIE_ATU_BUS(PCI_BUS(d)) | + PCIE_ATU_DEV(PCI_DEV(d)) | + PCIE_ATU_FUNC(PCI_FUNC(d)); + + if (PCI_BUS(d) == hose->first_busno + 1) { + ls_pcie_cfg0_set_busdev(pcie, busdev); + addr = pcie->va_cfg0 + (where & ~0x3); + } else { + ls_pcie_cfg1_set_busdev(pcie, busdev); + addr = pcie->va_cfg1 + (where & ~0x3); + } + } + + *val = readl(addr); + + return 0; +} + +static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 val) +{ + struct ls_pcie *pcie = hose->priv_data; + u32 busdev, *addr; + + if (ls_pcie_addr_valid(hose, d)) + return -EINVAL; + + if (PCI_BUS(d) == hose->first_busno) { + addr = pcie->dbi + (where & ~0x3); + } else { + busdev = PCIE_ATU_BUS(PCI_BUS(d)) | + PCIE_ATU_DEV(PCI_DEV(d)) | + PCIE_ATU_FUNC(PCI_FUNC(d)); + + if (PCI_BUS(d) == hose->first_busno + 1) { + ls_pcie_cfg0_set_busdev(pcie, busdev); + addr = pcie->va_cfg0 + (where & ~0x3); + } else { + ls_pcie_cfg1_set_busdev(pcie, busdev); + addr = pcie->va_cfg1 + (where & ~0x3); + } + } + + writel(val, addr); + + return 0; +} + +static void ls_pcie_setup_ctrl(struct ls_pcie *pcie, + struct ls_pcie_info *info) +{ + struct pci_controller *hose = &pcie->hose; + pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); + + ls_pcie_setup_atu(pcie, info); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0); + + /* program correct class for RC */ + pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE, + PCI_CLASS_BRIDGE_PCI); +} + +int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info) +{ + struct ls_pcie *pcie; + struct pci_controller *hose; + int num = dev - PCIE1; + pci_dev_t pdev = PCI_BDF(busno, 0, 0); + int i, linkup, ep_mode; + u8 header_type; + u16 temp16; + + if (!is_serdes_configured(dev)) { + printf("PCIe%d: disabled\n", num + 1); + return busno; + } + + pcie = malloc(sizeof(*pcie)); + if (!pcie) + return busno; + memset(pcie, 0, sizeof(*pcie)); + + hose = &pcie->hose; + hose->priv_data = pcie; + hose->first_busno = busno; + pcie->idx = num; + pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE); + pcie->va_cfg0 = map_physmem(info->cfg0_phys, + info->cfg0_size, + MAP_NOCACHE); + pcie->va_cfg1 = map_physmem(info->cfg1_phys, + info->cfg1_size, + MAP_NOCACHE); + + /* outbound memory */ + pci_set_region(&hose->regions[0], + (pci_size_t)info->mem_bus, + (phys_size_t)info->mem_phys, + (pci_size_t)info->mem_size, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(&hose->regions[1], + (pci_size_t)info->io_bus, + (phys_size_t)info->io_phys, + (pci_size_t)info->io_size, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(&hose->regions[2], + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, + PCI_REGION_SYS_MEMORY); + + hose->region_count = 3; + + for (i = 0; i < hose->region_count; i++) + debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", + i, + (u64)hose->regions[i].phys_start, + (u64)hose->regions[i].bus_start, + (u64)hose->regions[i].size, + hose->regions[i].flags); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + ls_pcie_read_config, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + ls_pcie_write_config); + + pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type); + ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; + printf("PCIe%u: %s ", info->pci_num, + ep_mode ? "Endpoint" : "Root Complex"); + + linkup = ls_pcie_link_up(pcie); + + if (!linkup) { + /* Let the user know there's no PCIe link */ + printf("no link, regs @ 0x%lx\n", info->regs); + hose->last_busno = hose->first_busno; + return busno; + } + + /* Print the negotiated PCIe link width */ + pci_hose_read_config_word(hose, dev, PCIE_LINK_STA, &temp16); + printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, + (temp16 & 0xf), info->regs); + + if (ep_mode) + return busno; + + ls_pcie_setup_ctrl(pcie, info); + + pci_register_hose(hose); + + hose->last_busno = pci_hose_scan(hose); + + printf("PCIe%x: Bus %02x - %02x\n", + info->pci_num, hose->first_busno, hose->last_busno); + + return hose->last_busno + 1; +} + +int ls_pcie_init_board(int busno) +{ + struct ls_pcie_info info; + +#ifdef CONFIG_PCIE1 + SET_LS_PCIE_INFO(info, 1); + busno = ls_pcie_init_ctrl(busno, PCIE1, &info); +#endif + +#ifdef CONFIG_PCIE2 + SET_LS_PCIE_INFO(info, 2); + busno = ls_pcie_init_ctrl(busno, PCIE2, &info); +#endif + +#ifdef CONFIG_PCIE3 + SET_LS_PCIE_INFO(info, 3); + busno = ls_pcie_init_ctrl(busno, PCIE3, &info); +#endif + +#ifdef CONFIG_PCIE4 + SET_LS_PCIE_INFO(info, 4); + busno = ls_pcie_init_ctrl(busno, PCIE4, &info); +#endif + + return busno; +} + +void pci_init_board(void) +{ + ls_pcie_init_board(0); +} + #ifdef CONFIG_OF_BOARD_SETUP #include <libfdt.h> #include <fdt_support.h> @@ -38,6 +495,14 @@ void ft_pcie_setup(void *blob, bd_t *bd) #ifdef CONFIG_PCIE2 ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2); #endif + + #ifdef CONFIG_PCIE3 + ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3); + #endif + + #ifdef CONFIG_PCIE4 + ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4); + #endif } #else @@ -45,7 +510,3 @@ void ft_pcie_setup(void *blob, bd_t *bd) { } #endif - -void pci_init_board(void) -{ -} diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 63b0cbf5da..b385852eee 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P) += serial_s5p.o obj-$(CONFIG_IMX_SERIAL) += serial_imx.o -obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o obj-$(CONFIG_MXC_UART) += serial_mxc.o obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 95c992a5a3..9f78492298 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -127,7 +127,6 @@ serial_initfunc(evb64260_serial_initialize); serial_initfunc(imx_serial_initialize); serial_initfunc(iop480_serial_initialize); serial_initfunc(jz_serial_initialize); -serial_initfunc(ks8695_serial_initialize); serial_initfunc(leon2_serial_initialize); serial_initfunc(leon3_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); @@ -220,7 +219,6 @@ void serial_initialize(void) imx_serial_initialize(); iop480_serial_initialize(); jz_serial_initialize(); - ks8695_serial_initialize(); leon2_serial_initialize(); leon3_serial_initialize(); lh7a40x_serial_initialize(); diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c deleted file mode 100644 index 13adabd112..0000000000 --- a/drivers/serial/serial_ks8695.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * serial.c -- KS8695 serial driver - * - * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> -#include <serial.h> -#include <linux/compiler.h> - -#ifndef CONFIG_SERIAL1 -#error "Bad: you didn't configure serial ..." -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Define the UART hardware register access structure. - */ -struct ks8695uart { - unsigned int RX; /* 0x00 - Receive data (r) */ - unsigned int TX; /* 0x04 - Transmit data (w) */ - unsigned int FCR; /* 0x08 - Fifo Control (r/w) */ - unsigned int LCR; /* 0x0c - Line Control (r/w) */ - unsigned int MCR; /* 0x10 - Modem Control (r/w) */ - unsigned int LSR; /* 0x14 - Line Status (r/w) */ - unsigned int MSR; /* 0x18 - Modem Status (r/w) */ - unsigned int BD; /* 0x1c - Baud Rate (r/w) */ - unsigned int SR; /* 0x20 - Status (r/w) */ -}; - -#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER)) -#define KS8695_UART_CLK 25000000 - - -/* - * Under some circumstances we want to be "quiet" and not issue any - * serial output - though we want u-boot to otherwise work and behave - * the same. By default be noisy. - */ -int serial_console = 1; - - -static void ks8695_serial_setbrg(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/ - uartp->BD = KS8695_UART_CLK / gd->baudrate; - uartp->LCR = KS8695_UART_LINEC_WLEN8; -} - -static int ks8695_serial_init(void) -{ - serial_console = 1; - serial_setbrg(); - return 0; -} - -static void ks8695_serial_raw_putc(const char c) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - int i; - - for (i = 0; (i < 0x100000); i++) { - if (uartp->LSR & KS8695_UART_LINES_TXFE) - break; - } - - uartp->TX = c; -} - -static void ks8695_serial_putc(const char c) -{ - if (serial_console) { - ks8695_serial_raw_putc(c); - if (c == '\n') - ks8695_serial_raw_putc('\r'); - } -} - -static int ks8695_serial_tstc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - if (serial_console) - return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0); - return 0; -} - -static int ks8695_serial_getc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0) - ; - return (uartp->RX); -} - -static struct serial_device ks8695_serial_drv = { - .name = "ks8695_serial", - .start = ks8695_serial_init, - .stop = NULL, - .setbrg = ks8695_serial_setbrg, - .putc = ks8695_serial_putc, - .puts = default_serial_puts, - .getc = ks8695_serial_getc, - .tstc = ks8695_serial_tstc, -}; - -void ks8695_serial_initialize(void) -{ - serial_register(&ks8695_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ks8695_serial_drv; -} diff --git a/drivers/video/Makefile b/drivers/video/Makefile index af2d47bd75..22a316b536 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o -obj-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o diff --git a/drivers/video/mb86r0xgdc.c b/drivers/video/mb86r0xgdc.c deleted file mode 100644 index bb7a7497cc..0000000000 --- a/drivers/video/mb86r0xgdc.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * mb86r0xgdc.c - Graphic interface for Fujitsu MB86R0x integrated graphic - * controller. - */ - -#include <common.h> - -#include <malloc.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <video_fb.h> -#include "videomodes.h" - -/* - * 4MB (at the end of system RAM) - */ -#define VIDEO_MEM_SIZE 0x400000 - -#define FB_SYNC_CLK_INV (1<<16) /* pixel clock inverted */ - -/* - * Graphic Device - */ -static GraphicDevice mb86r0x; - -static void dsp_init(struct mb86r0x_gdc_dsp *dsp, char *modestr, - u32 *videomem) -{ - struct ctfb_res_modes var_mode; - u32 dcm1, dcm2, dcm3; - u16 htp, hdp, hdb, hsp, vtr, vsp, vdp; - u8 hsw, vsw; - u32 l2m, l2em, l2oa0, l2da0, l2oa1, l2da1; - u16 l2dx, l2dy, l2wx, l2wy, l2ww, l2wh; - unsigned long div; - int bpp; - - bpp = video_get_params(&var_mode, modestr); - - if (bpp == 0) { - var_mode.xres = 640; - var_mode.yres = 480; - var_mode.pixclock = 39721; /* 25MHz */ - var_mode.left_margin = 48; - var_mode.right_margin = 16; - var_mode.upper_margin = 33; - var_mode.lower_margin = 10; - var_mode.hsync_len = 96; - var_mode.vsync_len = 2; - var_mode.sync = 0; - var_mode.vmode = 0; - bpp = 15; - } - - /* Fill memory with white */ - memset(videomem, 0xFF, var_mode.xres * var_mode.yres * 2); - - mb86r0x.winSizeX = var_mode.xres; - mb86r0x.winSizeY = var_mode.yres; - - /* LCD base clock is ~ 660MHZ. We do calculations in kHz */ - div = 660000 / (1000000000L / var_mode.pixclock); - if (div > 64) - div = 64; - if (0 == div) - div = 1; - - dcm1 = (div - 1) << 8; - dcm2 = 0x00000000; - if (var_mode.sync & FB_SYNC_CLK_INV) - dcm3 = 0x00000100; - else - dcm3 = 0x00000000; - - htp = var_mode.left_margin + var_mode.xres + - var_mode.hsync_len + var_mode.right_margin; - hdp = var_mode.xres; - hdb = var_mode.xres; - hsp = var_mode.xres + var_mode.right_margin; - hsw = var_mode.hsync_len; - - vsw = var_mode.vsync_len; - vtr = var_mode.upper_margin + var_mode.yres + - var_mode.vsync_len + var_mode.lower_margin; - vsp = var_mode.yres + var_mode.lower_margin; - vdp = var_mode.yres; - - l2m = ((var_mode.yres - 1) << (0)) | - (((var_mode.xres * 2) / 64) << (16)) | - ((1) << (31)); - - l2em = (1 << 0) | (1 << 1); - - l2oa0 = mb86r0x.frameAdrs; - l2da0 = mb86r0x.frameAdrs; - l2oa1 = mb86r0x.frameAdrs; - l2da1 = mb86r0x.frameAdrs; - l2dx = 0; - l2dy = 0; - l2wx = 0; - l2wy = 0; - l2ww = var_mode.xres; - l2wh = var_mode.yres - 1; - - writel(dcm1, &dsp->dcm1); - writel(dcm2, &dsp->dcm2); - writel(dcm3, &dsp->dcm3); - - writew(htp, &dsp->htp); - writew(hdp, &dsp->hdp); - writew(hdb, &dsp->hdb); - writew(hsp, &dsp->hsp); - writeb(hsw, &dsp->hsw); - - writeb(vsw, &dsp->vsw); - writew(vtr, &dsp->vtr); - writew(vsp, &dsp->vsp); - writew(vdp, &dsp->vdp); - - writel(l2m, &dsp->l2m); - writel(l2em, &dsp->l2em); - writel(l2oa0, &dsp->l2oa0); - writel(l2da0, &dsp->l2da0); - writel(l2oa1, &dsp->l2oa1); - writel(l2da1, &dsp->l2da1); - writew(l2dx, &dsp->l2dx); - writew(l2dy, &dsp->l2dy); - writew(l2wx, &dsp->l2wx); - writew(l2wy, &dsp->l2wy); - writew(l2ww, &dsp->l2ww); - writew(l2wh, &dsp->l2wh); - - writel(dcm1 | (1 << 18) | (1 << 31), &dsp->dcm1); -} - -void *video_hw_init(void) -{ - struct mb86r0x_gdc *gdc = (struct mb86r0x_gdc *) MB86R0x_GDC_BASE; - GraphicDevice *pGD = &mb86r0x; - char *s; - u32 *vid; - - memset(pGD, 0, sizeof(GraphicDevice)); - - pGD->gdfIndex = GDF_15BIT_555RGB; - pGD->gdfBytesPP = 2; - pGD->memSize = VIDEO_MEM_SIZE; - pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE; - - vid = (u32 *)pGD->frameAdrs; - - s = getenv("videomode"); - if (s != NULL) - dsp_init(&gdc->dsp0, s, vid); - - s = getenv("videomode1"); - if (s != NULL) - dsp_init(&gdc->dsp1, s, vid); - - return pGD; -} diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 1dc0f5aa10..482a4bd5be 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa)) obj-y += imx_watchdog.o endif -obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o obj-$(CONFIG_S5P) += s5p_wdt.o obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o obj-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o diff --git a/drivers/watchdog/tnetv107x_wdt.c b/drivers/watchdog/tnetv107x_wdt.c deleted file mode 100644 index 3d3f366c02..0000000000 --- a/drivers/watchdog/tnetv107x_wdt.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * TNETV107X: Watchdog timer implementation (for reset) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> - -#define MAX_DIV 0xFFFE0001 - -struct wdt_regs { - u32 kick_lock; -#define KICK_LOCK_1 0x5555 -#define KICK_LOCK_2 0xaaaa - u32 kick; - - u32 change_lock; -#define CHANGE_LOCK_1 0x6666 -#define CHANGE_LOCK_2 0xbbbb - u32 change; - - u32 disable_lock; -#define DISABLE_LOCK_1 0x7777 -#define DISABLE_LOCK_2 0xcccc -#define DISABLE_LOCK_3 0xdddd - u32 disable; - - u32 prescale_lock; -#define PRESCALE_LOCK_1 0x5a5a -#define PRESCALE_LOCK_2 0xa5a5 - u32 prescale; -}; - -static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE; - -#define wdt_reg_read(reg) __raw_readl(®s->reg) -#define wdt_reg_write(reg, val) __raw_writel((val), ®s->reg) - -static int write_prescale_reg(unsigned long prescale_value) -{ - wdt_reg_write(prescale_lock, PRESCALE_LOCK_1); - if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1) - return -1; - - wdt_reg_write(prescale_lock, PRESCALE_LOCK_2); - if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3) - return -1; - - wdt_reg_write(prescale, prescale_value); - - return 0; -} - -static int write_change_reg(unsigned long initial_timer_value) -{ - wdt_reg_write(change_lock, CHANGE_LOCK_1); - if ((wdt_reg_read(change_lock) & 0x3) != 0x1) - return -1; - - wdt_reg_write(change_lock, CHANGE_LOCK_2); - if ((wdt_reg_read(change_lock) & 0x3) != 0x3) - return -1; - - wdt_reg_write(change, initial_timer_value); - - return 0; -} - -static int wdt_control(unsigned long disable_value) -{ - wdt_reg_write(disable_lock, DISABLE_LOCK_1); - if ((wdt_reg_read(disable_lock) & 0x3) != 0x1) - return -1; - - wdt_reg_write(disable_lock, DISABLE_LOCK_2); - if ((wdt_reg_read(disable_lock) & 0x3) != 0x2) - return -1; - - wdt_reg_write(disable_lock, DISABLE_LOCK_3); - if ((wdt_reg_read(disable_lock) & 0x3) != 0x3) - return -1; - - wdt_reg_write(disable, disable_value); - return 0; -} - -static int wdt_set_period(unsigned long msec) -{ - unsigned long change_value, count_value; - unsigned long prescale_value = 1; - unsigned long refclk_khz, maxdiv; - int ret; - - refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM); - maxdiv = (MAX_DIV / refclk_khz); - - if ((!msec) || (msec > maxdiv)) - return -1; - - count_value = refclk_khz * msec; - if (count_value > 0xffff) { - change_value = count_value / 0xffff + 1; - prescale_value = count_value / change_value; - } else { - change_value = count_value; - } - - ret = write_prescale_reg(prescale_value - 1); - if (ret) - return ret; - - ret = write_change_reg(change_value); - if (ret) - return ret; - - return 0; -} - -unsigned long last_wdt = -1; - -int wdt_start(unsigned long msecs) -{ - int ret; - ret = wdt_control(0); - if (ret) - return ret; - ret = wdt_set_period(msecs); - if (ret) - return ret; - ret = wdt_control(1); - if (ret) - return ret; - ret = wdt_kick(); - last_wdt = msecs; - return ret; -} - -int wdt_stop(void) -{ - last_wdt = -1; - return wdt_control(0); -} - -int wdt_kick(void) -{ - wdt_reg_write(kick_lock, KICK_LOCK_1); - if ((wdt_reg_read(kick_lock) & 0x3) != 0x1) - return -1; - - wdt_reg_write(kick_lock, KICK_LOCK_2); - if ((wdt_reg_read(kick_lock) & 0x3) != 0x3) - return -1; - - wdt_reg_write(kick, 1); - return 0; -} - -void reset_cpu(ulong addr) -{ - clk_enable(TNETV107X_LPSC_WDT_ARM); - wdt_start(1); - wdt_kick(); -} |