diff options
Diffstat (limited to 'drivers/video/pxa_lcd.c')
-rw-r--r-- | drivers/video/pxa_lcd.c | 650 |
1 files changed, 650 insertions, 0 deletions
diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c new file mode 100644 index 00000000000..25747b112e0 --- /dev/null +++ b/drivers/video/pxa_lcd.c @@ -0,0 +1,650 @@ +/* + * PXA LCD Controller + * + * (C) Copyright 2001-2002 + * Wolfgang Denk, DENX Software Engineering -- wd@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************/ +/* ** HEADER FILES */ +/************************************************************************/ + +#include <config.h> +#include <common.h> +#include <version.h> +#include <stdarg.h> +#include <linux/types.h> +#include <stdio_dev.h> +#include <lcd.h> +#include <asm/arch/pxa-regs.h> +#include <asm/io.h> + +/* #define DEBUG */ + +#ifdef CONFIG_LCD + +/*----------------------------------------------------------------------*/ +/* + * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for + * your display. + */ + +#ifdef CONFIG_PXA_VGA +/* LCD outputs connected to a video DAC */ +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f8 +# define REG_LCCR3 0x0300FF01 + +/* 640x480x16 @ 61 Hz */ +vidinfo_t panel_info = { + .vl_col = 640, + .vl_row = 480, + .vl_width = 640, + .vl_height = 480, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 0, + .vl_clor = 0, + .vl_tft = 1, + .vl_hpw = 40, + .vl_blw = 56, + .vl_elw = 56, + .vl_vpw = 20, + .vl_bfw = 8, + .vl_efw = 8, +}; +#endif /* CONFIG_PXA_VIDEO */ + +/*----------------------------------------------------------------------*/ +#ifdef CONFIG_SHARP_LM8V31 + +# define LCD_BPP LCD_COLOR8 +# define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x0030087C +# define REG_LCCR3 0x0340FF08 + +vidinfo_t panel_info = { + .vl_col = 640, + .vl_row = 480, + .vl_width = 157, + .vl_height = 118, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 0, + .vl_hpw = 1, + .vl_blw = 3, + .vl_elw = 3, + .vl_vpw = 1, + .vl_bfw = 0, + .vl_efw = 0, +}; +#endif /* CONFIG_SHARP_LM8V31 */ +/*----------------------------------------------------------------------*/ +#ifdef CONFIG_VOIPAC_LCD + +# define LCD_BPP LCD_COLOR8 +# define LCD_INVERT_COLORS + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x043008f8 +# define REG_LCCR3 0x0340FF08 + +vidinfo_t panel_info = { + .vl_col = 640, + .vl_row = 480, + .vl_width = 157, + .vl_height = 118, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 32, + .vl_blw = 144, + .vl_elw = 32, + .vl_vpw = 2, + .vl_bfw = 13, + .vl_efw = 30, +}; +#endif /* CONFIG_VOIPAC_LCD */ + +/*----------------------------------------------------------------------*/ +#ifdef CONFIG_HITACHI_SX14 +/* Hitachi SX14Q004-ZZA color STN LCD */ +#define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +#define REG_LCCR0 0x00301079 +#define REG_LCCR3 0x0340FF20 + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 240, + .vl_width = 167, + .vl_height = 109, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 1, + .vl_splt = 0, + .vl_clor = 1, + .vl_tft = 0, + .vl_hpw = 1, + .vl_blw = 1, + .vl_elw = 1, + .vl_vpw = 7, + .vl_bfw = 0, + .vl_efw = 0, +}; +#endif /* CONFIG_HITACHI_SX14 */ + +/*----------------------------------------------------------------------*/ +#ifdef CONFIG_LMS283GF05 + +# define LCD_BPP LCD_COLOR8 +/*# define LCD_INVERT_COLORS*/ + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x043008f8 +# define REG_LCCR3 0x03b00009 + +vidinfo_t panel_info = { + .vl_col = 240, + .vl_row = 320, + .vl_width = 240, + .vl_height = 320, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 4, + .vl_blw = 4, + .vl_elw = 8, + .vl_vpw = 4, + .vl_bfw = 4, + .vl_efw = 8, +}; +#endif /* CONFIG_LMS283GF05 */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_ACX517AKN + +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f9 +# define REG_LCCR3 0x03700006 + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 320, + .vl_width = 320, + .vl_height = 320, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 0x04, + .vl_blw = 0x1c, + .vl_elw = 0x08, + .vl_vpw = 0x01, + .vl_bfw = 0x07, + .vl_efw = 0x08, +}; +#endif /* CONFIG_ACX517AKN */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_LQ038J7DH53 + +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f9 +# define REG_LCCR3 0x03700004 + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 480, + .vl_width = 320, + .vl_height = 480, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 1, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 0x04, + .vl_blw = 0x20, + .vl_elw = 0x01, + .vl_vpw = 0x01, + .vl_bfw = 0x04, + .vl_efw = 0x01, +}; +#endif /* CONFIG_ACX517AKN */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_LITTLETON_LCD +# define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f8 +# define REG_LCCR3 0x0300FF04 + +vidinfo_t panel_info = { + .vl_col = 480, + .vl_row = 640, + .vl_width = 480, + .vl_height = 640, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_oep = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 0, + .vl_clor = 0, + .vl_tft = 1, + .vl_hpw = 9, + .vl_blw = 8, + .vl_elw = 24, + .vl_vpw = 2, + .vl_bfw = 2, + .vl_efw = 4, +}; +#endif /* CONFIG_LITTLETON_LCD */ + +/*----------------------------------------------------------------------*/ + +#if LCD_BPP == LCD_COLOR8 +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); +#endif +#if LCD_BPP == LCD_MONOCHROME +void lcd_initcolregs (void); +#endif + +#ifdef NOT_USED_SO_FAR +void lcd_disable (void); +void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue); +#endif /* NOT_USED_SO_FAR */ + +void lcd_ctrl_init (void *lcdbase); +void lcd_enable (void); + +int lcd_line_length; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + +static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid); +static void pxafb_setup_gpio (vidinfo_t *vid); +static void pxafb_enable_controller (vidinfo_t *vid); +static int pxafb_init (vidinfo_t *vid); +/************************************************************************/ + +/************************************************************************/ +/* --------------- PXA chipset specific functions ------------------- */ +/************************************************************************/ + +void lcd_ctrl_init (void *lcdbase) +{ + pxafb_init_mem(lcdbase, &panel_info); + pxafb_init(&panel_info); + pxafb_setup_gpio(&panel_info); + pxafb_enable_controller(&panel_info); +} + +/*----------------------------------------------------------------------*/ +#ifdef NOT_USED_SO_FAR +void +lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) +{ +} +#endif /* NOT_USED_SO_FAR */ + +/*----------------------------------------------------------------------*/ +#if LCD_BPP == LCD_COLOR8 +void +lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) +{ + struct pxafb_info *fbi = &panel_info.pxa; + unsigned short *palette = (unsigned short *)fbi->palette; + u_int val; + + if (regno < fbi->palette_size) { + val = ((red << 8) & 0xf800); + val |= ((green << 4) & 0x07e0); + val |= (blue & 0x001f); + +#ifdef LCD_INVERT_COLORS + palette[regno] = ~val; +#else + palette[regno] = val; +#endif + } + + debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n", + regno, &palette[regno], + red, green, blue, + palette[regno]); +} +#endif /* LCD_COLOR8 */ + +/*----------------------------------------------------------------------*/ +#if LCD_BPP == LCD_MONOCHROME +void lcd_initcolregs (void) +{ + struct pxafb_info *fbi = &panel_info.pxa; + cmap = (ushort *)fbi->palette; + ushort regno; + + for (regno = 0; regno < 16; regno++) { + cmap[regno * 2] = 0; + cmap[(regno * 2) + 1] = regno & 0x0f; + } +} +#endif /* LCD_MONOCHROME */ + +/*----------------------------------------------------------------------*/ +void lcd_enable (void) +{ +} + +/*----------------------------------------------------------------------*/ +#ifdef NOT_USED_SO_FAR +static void lcd_disable (void) +{ +} +#endif /* NOT_USED_SO_FAR */ + +/*----------------------------------------------------------------------*/ + +/************************************************************************/ +/* ** PXA255 specific routines */ +/************************************************************************/ + +/* + * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb, + * descriptors and palette areas. + */ +ulong calc_fbsize (void) +{ + ulong size; + int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; + + size = line_length * panel_info.vl_row; + size += PAGE_SIZE; + + return size; +} + +static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid) +{ + u_long palette_mem_size; + struct pxafb_info *fbi = &vid->pxa; + int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; + + fbi->screen = (u_long)lcdbase; + + fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; + palette_mem_size = fbi->palette_size * sizeof(u16); + + debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + /* locate palette and descs at end of page following fb */ + fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; + + return 0; +} +#ifdef CONFIG_CPU_MONAHANS +static inline void pxafb_setup_gpio (vidinfo_t *vid) {} +#else +static void pxafb_setup_gpio (vidinfo_t *vid) +{ + u_long lccr0; + + /* + * setup is based on type of panel supported + */ + + lccr0 = vid->pxa.reg_lccr0; + + /* 4 bit interface */ + if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD)) + { + debug("Setting GPIO for 4 bit data\n"); + /* bits 58-61 */ + writel(readl(GPDR1) | (0xf << 26), GPDR1); + writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20), + GAFR1_U); + + /* bits 74-77 */ + writel(readl(GPDR2) | (0xf << 10), GPDR2); + writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), + GAFR2_L); + } + + /* 8 bit interface */ + else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) || + (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS))) + { + debug("Setting GPIO for 8 bit data\n"); + /* bits 58-65 */ + writel(readl(GPDR1) | (0x3f << 26), GPDR1); + writel(readl(GPDR2) | (0x3), GPDR2); + + writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), + GAFR1_U); + writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L); + + /* bits 74-77 */ + writel(readl(GPDR2) | (0xf << 10), GPDR2); + writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), + GAFR2_L); + } + + /* 16 bit interface */ + else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS))) + { + debug("Setting GPIO for 16 bit data\n"); + /* bits 58-77 */ + writel(readl(GPDR1) | (0x3f << 26), GPDR1); + writel(readl(GPDR2) | 0x00003fff, GPDR2); + + writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), + GAFR1_U); + writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L); + } + else + { + printf("pxafb_setup_gpio: unable to determine bits per pixel\n"); + } +} +#endif + +static void pxafb_enable_controller (vidinfo_t *vid) +{ + debug("Enabling LCD controller\n"); + + /* Sequence from 11.7.10 */ + writel(vid->pxa.reg_lccr3, LCCR3); + writel(vid->pxa.reg_lccr2, LCCR2); + writel(vid->pxa.reg_lccr1, LCCR1); + writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0); + writel(vid->pxa.fdadr0, FDADR0); + writel(vid->pxa.fdadr1, FDADR1); + writel(readl(LCCR0) | LCCR0_ENB, LCCR0); + +#ifdef CONFIG_CPU_MONAHANS + writel(readl(CKENA) | CKENA_1_LCD, CKENA); +#else + writel(readl(CKEN) | CKEN16_LCD, CKEN); +#endif + + debug("FDADR0 = 0x%08x\n", readl(FDADR0)); + debug("FDADR1 = 0x%08x\n", readl(FDADR1)); + debug("LCCR0 = 0x%08x\n", readl(LCCR0)); + debug("LCCR1 = 0x%08x\n", readl(LCCR1)); + debug("LCCR2 = 0x%08x\n", readl(LCCR2)); + debug("LCCR3 = 0x%08x\n", readl(LCCR3)); +} + +static int pxafb_init (vidinfo_t *vid) +{ + struct pxafb_info *fbi = &vid->pxa; + + debug("Configuring PXA LCD\n"); + + fbi->reg_lccr0 = REG_LCCR0; + fbi->reg_lccr3 = REG_LCCR3; + + debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n", + vid->vl_col, vid->vl_hpw, + vid->vl_blw, vid->vl_elw); + debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n", + vid->vl_row, vid->vl_vpw, + vid->vl_bfw, vid->vl_efw); + + fbi->reg_lccr1 = + LCCR1_DisWdth(vid->vl_col) + + LCCR1_HorSnchWdth(vid->vl_hpw) + + LCCR1_BegLnDel(vid->vl_blw) + + LCCR1_EndLnDel(vid->vl_elw); + + fbi->reg_lccr2 = + LCCR2_DisHght(vid->vl_row) + + LCCR2_VrtSnchWdth(vid->vl_vpw) + + LCCR2_BegFrmDel(vid->vl_bfw) + + LCCR2_EndFrmDel(vid->vl_efw); + + fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP); + fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH) + | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH); + + + /* setup dma descriptors */ + fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); + fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); + fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); + + #define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \ + (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \ + (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)) + + /* populate descriptors */ + fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow; + fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL; + fbi->dmadesc_fblow->fidr = 0; + fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL; + + fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */ + + fbi->dmadesc_fbhigh->fsadr = fbi->screen; + fbi->dmadesc_fbhigh->fidr = 0; + fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL; + + fbi->dmadesc_palette->fsadr = fbi->palette; + fbi->dmadesc_palette->fidr = 0; + fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; + + if( NBITS(vid->vl_bpix) < 12) + { + /* assume any mode with <12 bpp is palette driven */ + fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh; + fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette; + /* flips back and forth between pal and fbhigh */ + fbi->fdadr0 = (u_long)fbi->dmadesc_palette; + } + else + { + /* palette shouldn't be loaded in true-color mode */ + fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh; + fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */ + } + + debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow); + debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh); + debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette); + + debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr); + debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr); + debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr); + + debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr); + debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr); + debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr); + + debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd); + debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd); + debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd); + + return 0; +} + +/************************************************************************/ +/************************************************************************/ + +#endif /* CONFIG_LCD */ |