summaryrefslogtreecommitdiff
path: root/drivers/smc91111.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/smc91111.h')
-rw-r--r--drivers/smc91111.h619
1 files changed, 619 insertions, 0 deletions
diff --git a/drivers/smc91111.h b/drivers/smc91111.h
new file mode 100644
index 00000000000..a372c2734d5
--- /dev/null
+++ b/drivers/smc91111.h
@@ -0,0 +1,619 @@
+/*------------------------------------------------------------------------
+ . smc91111.h - macros for the LAN91C111 Ethernet Driver
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ . Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ .
+ . This file contains register information and access macros for
+ . the LAN91C111 single chip ethernet controller. It is a modified
+ . version of the smc9194.h file.
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC. To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ . Authors
+ . Erik Stahlman ( erik@vt.edu )
+ . Daris A Nevil ( dnevil@snmc.com )
+ .
+ . History
+ . 03/16/01 Daris A Nevil Modified for use with LAN91C111 device
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC91111_H_
+#define _SMC91111_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr(const char *addr);
+
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+/*
+ . DEBUGGING LEVELS
+ .
+ . 0 for normal operation
+ . 1 for slightly more details
+ . >2 for various levels of increasingly useless information
+ . 2 for interrupt tracking, status flags
+ . 3 for packet info
+ . 4 for complete packet dumps
+*/
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+#ifdef CONFIG_PXA250
+
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(p) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \
+ unsigned int __v = *(volatile unsigned short *)((SMC_BASE_ADDRESS + __p) & ~1); \
+ if (__p & 1) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r); \
+ } \
+ })
+
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+
+#define SMC_insb(r,b,l) ({ int __i ; \
+ byte *__b2; \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inb(r); \
+ SMC_inb(0); \
+ }; \
+ })
+
+#else /* if not CONFIG_PXA250 */
+
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+#if 0
+#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+#endif
+
+#if 0
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+#endif
+
+#endif
+
+/*---------------------------------------------------------------
+ .
+ . A description of the SMSC registers is probably in order here,
+ . although for details, the SMC datasheet is invaluable.
+ .
+ . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ . are accessed by writing a number into the BANK_SELECT register
+ . ( I also use a SMC_SELECT_BANK macro for this ).
+ .
+ . The banks are configured so that for most purposes, bank 2 is all
+ . that is needed for simple run time tasks.
+ -----------------------------------------------------------------------*/
+
+/*
+ . Bank Select Register:
+ .
+ . yyyy yyyy 0000 00xx
+ . xx = bank number
+ . yyyy yyyy = 0x33, for identification purposes.
+*/
+#define BANK_SELECT 14
+
+/* Transmit Control Register */
+/* BANK 0 */
+#define TCR_REG 0x0000 /* transmit control register */
+#define TCR_ENABLE 0x0001 /* When 1 we can transmit */
+#define TCR_LOOP 0x0002 /* Controls output pin LBK */
+#define TCR_FORCOL 0x0004 /* When 1 will force a collision */
+#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */
+#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */
+#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */
+#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
+#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */
+#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */
+#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */
+
+#define TCR_CLEAR 0 /* do NOTHING */
+/* the default settings for the TCR register : */
+/* QUESTION: do I want to enable padding of short packets ? */
+#define TCR_DEFAULT TCR_ENABLE
+
+
+/* EPH Status Register */
+/* BANK 0 */
+#define EPH_STATUS_REG 0x0002
+#define ES_TX_SUC 0x0001 /* Last TX was successful */
+#define ES_SNGL_COL 0x0002 /* Single collision detected for last tx */
+#define ES_MUL_COL 0x0004 /* Multiple collisions detected for last tx */
+#define ES_LTX_MULT 0x0008 /* Last tx was a multicast */
+#define ES_16COL 0x0010 /* 16 Collisions Reached */
+#define ES_SQET 0x0020 /* Signal Quality Error Test */
+#define ES_LTXBRD 0x0040 /* Last tx was a broadcast */
+#define ES_TXDEFR 0x0080 /* Transmit Deferred */
+#define ES_LATCOL 0x0200 /* Late collision detected on last tx */
+#define ES_LOSTCARR 0x0400 /* Lost Carrier Sense */
+#define ES_EXC_DEF 0x0800 /* Excessive Deferral */
+#define ES_CTR_ROL 0x1000 /* Counter Roll Over indication */
+#define ES_LINK_OK 0x4000 /* Driven by inverted value of nLNK pin */
+#define ES_TXUNRN 0x8000 /* Tx Underrun */
+
+
+/* Receive Control Register */
+/* BANK 0 */
+#define RCR_REG 0x0004
+#define RCR_RX_ABORT 0x0001 /* Set if a rx frame was aborted */
+#define RCR_PRMS 0x0002 /* Enable promiscuous mode */
+#define RCR_ALMUL 0x0004 /* When set accepts all multicast frames */
+#define RCR_RXEN 0x0100 /* IFF this is set, we can receive packets */
+#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */
+#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */
+#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */
+#define RCR_SOFTRST 0x8000 /* resets the chip */
+
+/* the normal settings for the RCR register : */
+#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
+#define RCR_CLEAR 0x0 /* set it to a base state */
+
+/* Counter Register */
+/* BANK 0 */
+#define COUNTER_REG 0x0006
+
+/* Memory Information Register */
+/* BANK 0 */
+#define MIR_REG 0x0008
+
+/* Receive/Phy Control Register */
+/* BANK 0 */
+#define RPC_REG 0x000A
+#define RPC_SPEED 0x2000 /* When 1 PHY is in 100Mbps mode. */
+#define RPC_DPLX 0x1000 /* When 1 PHY is in Full-Duplex Mode */
+#define RPC_ANEG 0x0800 /* When 1 PHY is in Auto-Negotiate Mode */
+#define RPC_LSXA_SHFT 5 /* Bits to shift LS2A,LS1A,LS0A to lsb */
+#define RPC_LSXB_SHFT 2 /* Bits to get LS2B,LS1B,LS0B to lsb */
+#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES (0x01) /* LED = Reserved */
+#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
+#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
+#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
+#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
+#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
+#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
+
+/* Bank 0 0x000C is reserved */
+
+/* Bank Select Register */
+/* All Banks */
+#define BSR_REG 0x000E
+
+
+/* Configuration Reg */
+/* BANK 1 */
+#define CONFIG_REG 0x0000
+#define CONFIG_EXT_PHY 0x0200 /* 1=external MII, 0=internal Phy */
+#define CONFIG_GPCNTRL 0x0400 /* Inverse value drives pin nCNTRL */
+#define CONFIG_NO_WAIT 0x1000 /* When 1 no extra wait states on ISA bus */
+#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
+
+/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
+#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
+
+
+/* Base Address Register */
+/* BANK 1 */
+#define BASE_REG 0x0002
+
+
+/* Individual Address Registers */
+/* BANK 1 */
+#define ADDR0_REG 0x0004
+#define ADDR1_REG 0x0006
+#define ADDR2_REG 0x0008
+
+
+/* General Purpose Register */
+/* BANK 1 */
+#define GP_REG 0x000A
+
+
+/* Control Register */
+/* BANK 1 */
+#define CTL_REG 0x000C
+#define CTL_RCV_BAD 0x4000 /* When 1 bad CRC packets are received */
+#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
+#define CTL_LE_ENABLE 0x0080 /* When 1 enables Link Error interrupt */
+#define CTL_CR_ENABLE 0x0040 /* When 1 enables Counter Rollover interrupt */
+#define CTL_TE_ENABLE 0x0020 /* When 1 enables Transmit Error interrupt */
+#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
+#define CTL_RELOAD 0x0002 /* When set reads EEPROM into registers */
+#define CTL_STORE 0x0001 /* When set stores registers into EEPROM */
+#define CTL_DEFAULT (0x1210)
+
+/* MMU Command Register */
+/* BANK 2 */
+#define MMU_CMD_REG 0x0000
+#define MC_BUSY 1 /* When 1 the last release has not completed */
+#define MC_NOP (0<<5) /* No Op */
+#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
+#define MC_RESET (2<<5) /* Reset MMU to initial state */
+#define MC_REMOVE (3<<5) /* Remove the current rx packet */
+#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
+#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
+#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */
+#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */
+
+
+/* Packet Number Register */
+/* BANK 2 */
+#define PN_REG 0x0002
+
+
+/* Allocation Result Register */
+/* BANK 2 */
+#define AR_REG 0x0003
+#define AR_FAILED 0x80 /* Alocation Failed */
+
+
+/* RX FIFO Ports Register */
+/* BANK 2 */
+#define RXFIFO_REG 0x0004 /* Must be read as a word */
+#define RXFIFO_REMPTY 0x8000 /* RX FIFO Empty */
+
+
+/* TX FIFO Ports Register */
+/* BANK 2 */
+#define TXFIFO_REG RXFIFO_REG /* Must be read as a word */
+#define TXFIFO_TEMPTY 0x80 /* TX FIFO Empty */
+
+
+/* Pointer Register */
+/* BANK 2 */
+#define PTR_REG 0x0006
+#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */
+#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
+#define PTR_READ 0x2000 /* When 1 the operation is a read */
+
+
+/* Data Register */
+/* BANK 2 */
+#define SMC91111_DATA_REG 0x0008
+
+
+/* Interrupt Status/Acknowledge Register */
+/* BANK 2 */
+#define SMC91111_INT_REG 0x000C
+
+
+/* Interrupt Mask Register */
+/* BANK 2 */
+#define IM_REG 0x000D
+#define IM_MDINT 0x80 /* PHY MI Register 18 Interrupt */
+#define IM_ERCV_INT 0x40 /* Early Receive Interrupt */
+#define IM_EPH_INT 0x20 /* Set by Etheret Protocol Handler section */
+#define IM_RX_OVRN_INT 0x10 /* Set by Receiver Overruns */
+#define IM_ALLOC_INT 0x08 /* Set when allocation request is completed */
+#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
+#define IM_TX_INT 0x02 /* Transmit Interrrupt */
+#define IM_RCV_INT 0x01 /* Receive Interrupt */
+
+
+/* Multicast Table Registers */
+/* BANK 3 */
+#define MCAST_REG1 0x0000
+#define MCAST_REG2 0x0002
+#define MCAST_REG3 0x0004
+#define MCAST_REG4 0x0006
+
+
+/* Management Interface Register (MII) */
+/* BANK 3 */
+#define MII_REG 0x0008
+#define MII_MSK_CRS100 0x4000 /* Disables CRS100 detection during tx half dup */
+#define MII_MDOE 0x0008 /* MII Output Enable */
+#define MII_MCLK 0x0004 /* MII Clock, pin MDCLK */
+#define MII_MDI 0x0002 /* MII Input, pin MDI */
+#define MII_MDO 0x0001 /* MII Output, pin MDO */
+
+
+/* Revision Register */
+/* BANK 3 */
+#define REV_REG 0x000A /* ( hi: chip id low: rev # ) */
+
+
+/* Early RCV Register */
+/* BANK 3 */
+/* this is NOT on SMC9192 */
+#define ERCV_REG 0x000C
+#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
+#define ERCV_THRESHOLD 0x001F /* ERCV Threshold Mask */
+
+/* External Register */
+/* BANK 7 */
+#define EXT_REG 0x0000
+
+
+#define CHIP_9192 3
+#define CHIP_9194 4
+#define CHIP_9195 5
+#define CHIP_9196 6
+#define CHIP_91100 7
+#define CHIP_91100FD 8
+#define CHIP_91111FD 9
+
+#if 0
+static const char * chip_ids[ 15 ] = {
+ NULL, NULL, NULL,
+ /* 3 */ "SMC91C90/91C92",
+ /* 4 */ "SMC91C94",
+ /* 5 */ "SMC91C95",
+ /* 6 */ "SMC91C96",
+ /* 7 */ "SMC91C100",
+ /* 8 */ "SMC91C100FD",
+ /* 9 */ "SMC91C111",
+ NULL, NULL,
+ NULL, NULL, NULL};
+#endif
+
+/*
+ . Transmit status bits
+*/
+#define TS_SUCCESS 0x0001
+#define TS_LOSTCAR 0x0400
+#define TS_LATCOL 0x0200
+#define TS_16COL 0x0010
+
+/*
+ . Receive status bits
+*/
+#define RS_ALGNERR 0x8000
+#define RS_BRODCAST 0x4000
+#define RS_BADCRC 0x2000
+#define RS_ODDFRAME 0x1000 /* bug: the LAN91C111 never sets this on receive */
+#define RS_TOOLONG 0x0800
+#define RS_TOOSHORT 0x0400
+#define RS_MULTICAST 0x0001
+#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+
+/* PHY Types */
+enum {
+ PHY_LAN83C183 = 1, /* LAN91C111 Internal PHY */
+ PHY_LAN83C180
+};
+
+
+/* PHY Register Addresses (LAN91C111 Internal PHY) */
+
+/* PHY Control Register */
+#define PHY_CNTL_REG 0x00
+#define PHY_CNTL_RST 0x8000 /* 1=PHY Reset */
+#define PHY_CNTL_LPBK 0x4000 /* 1=PHY Loopback */
+#define PHY_CNTL_SPEED 0x2000 /* 1=100Mbps, 0=10Mpbs */
+#define PHY_CNTL_ANEG_EN 0x1000 /* 1=Enable Auto negotiation */
+#define PHY_CNTL_PDN 0x0800 /* 1=PHY Power Down mode */
+#define PHY_CNTL_MII_DIS 0x0400 /* 1=MII 4 bit interface disabled */
+#define PHY_CNTL_ANEG_RST 0x0200 /* 1=Reset Auto negotiate */
+#define PHY_CNTL_DPLX 0x0100 /* 1=Full Duplex, 0=Half Duplex */
+#define PHY_CNTL_COLTST 0x0080 /* 1= MII Colision Test */
+
+/* PHY Status Register */
+#define PHY_STAT_REG 0x01
+#define PHY_STAT_CAP_T4 0x8000 /* 1=100Base-T4 capable */
+#define PHY_STAT_CAP_TXF 0x4000 /* 1=100Base-X full duplex capable */
+#define PHY_STAT_CAP_TXH 0x2000 /* 1=100Base-X half duplex capable */
+#define PHY_STAT_CAP_TF 0x1000 /* 1=10Mbps full duplex capable */
+#define PHY_STAT_CAP_TH 0x0800 /* 1=10Mbps half duplex capable */
+#define PHY_STAT_CAP_SUPR 0x0040 /* 1=recv mgmt frames with not preamble */
+#define PHY_STAT_ANEG_ACK 0x0020 /* 1=ANEG has completed */
+#define PHY_STAT_REM_FLT 0x0010 /* 1=Remote Fault detected */
+#define PHY_STAT_CAP_ANEG 0x0008 /* 1=Auto negotiate capable */
+#define PHY_STAT_LINK 0x0004 /* 1=valid link */
+#define PHY_STAT_JAB 0x0002 /* 1=10Mbps jabber condition */
+#define PHY_STAT_EXREG 0x0001 /* 1=extended registers implemented */
+
+/* PHY Identifier Registers */
+#define PHY_ID1_REG 0x02 /* PHY Identifier 1 */
+#define PHY_ID2_REG 0x03 /* PHY Identifier 2 */
+
+/* PHY Auto-Negotiation Advertisement Register */
+#define PHY_AD_REG 0x04
+#define PHY_AD_NP 0x8000 /* 1=PHY requests exchange of Next Page */
+#define PHY_AD_ACK 0x4000 /* 1=got link code word from remote */
+#define PHY_AD_RF 0x2000 /* 1=advertise remote fault */
+#define PHY_AD_T4 0x0200 /* 1=PHY is capable of 100Base-T4 */
+#define PHY_AD_TX_FDX 0x0100 /* 1=PHY is capable of 100Base-TX FDPLX */
+#define PHY_AD_TX_HDX 0x0080 /* 1=PHY is capable of 100Base-TX HDPLX */
+#define PHY_AD_10_FDX 0x0040 /* 1=PHY is capable of 10Base-T FDPLX */
+#define PHY_AD_10_HDX 0x0020 /* 1=PHY is capable of 10Base-T HDPLX */
+#define PHY_AD_CSMA 0x0001 /* 1=PHY is capable of 802.3 CMSA */
+
+/* PHY Auto-negotiation Remote End Capability Register */
+#define PHY_RMT_REG 0x05
+/* Uses same bit definitions as PHY_AD_REG */
+
+/* PHY Configuration Register 1 */
+#define PHY_CFG1_REG 0x10
+#define PHY_CFG1_LNKDIS 0x8000 /* 1=Rx Link Detect Function disabled */
+#define PHY_CFG1_XMTDIS 0x4000 /* 1=TP Transmitter Disabled */
+#define PHY_CFG1_XMTPDN 0x2000 /* 1=TP Transmitter Powered Down */
+#define PHY_CFG1_BYPSCR 0x0400 /* 1=Bypass scrambler/descrambler */
+#define PHY_CFG1_UNSCDS 0x0200 /* 1=Unscramble Idle Reception Disable */
+#define PHY_CFG1_EQLZR 0x0100 /* 1=Rx Equalizer Disabled */
+#define PHY_CFG1_CABLE 0x0080 /* 1=STP(150ohm), 0=UTP(100ohm) */
+#define PHY_CFG1_RLVL0 0x0040 /* 1=Rx Squelch level reduced by 4.5db */
+#define PHY_CFG1_TLVL_SHIFT 2 /* Transmit Output Level Adjust */
+#define PHY_CFG1_TLVL_MASK 0x003C
+#define PHY_CFG1_TRF_MASK 0x0003 /* Transmitter Rise/Fall time */
+
+
+/* PHY Configuration Register 2 */
+#define PHY_CFG2_REG 0x11
+#define PHY_CFG2_APOLDIS 0x0020 /* 1=Auto Polarity Correction disabled */
+#define PHY_CFG2_JABDIS 0x0010 /* 1=Jabber disabled */
+#define PHY_CFG2_MREG 0x0008 /* 1=Multiple register access (MII mgt) */
+#define PHY_CFG2_INTMDIO 0x0004 /* 1=Interrupt signaled with MDIO pulseo */
+
+/* PHY Status Output (and Interrupt status) Register */
+#define PHY_INT_REG 0x12 /* Status Output (Interrupt Status) */
+#define PHY_INT_INT 0x8000 /* 1=bits have changed since last read */
+#define PHY_INT_LNKFAIL 0x4000 /* 1=Link Not detected */
+#define PHY_INT_LOSSSYNC 0x2000 /* 1=Descrambler has lost sync */
+#define PHY_INT_CWRD 0x1000 /* 1=Invalid 4B5B code detected on rx */
+#define PHY_INT_SSD 0x0800 /* 1=No Start Of Stream detected on rx */
+#define PHY_INT_ESD 0x0400 /* 1=No End Of Stream detected on rx */
+#define PHY_INT_RPOL 0x0200 /* 1=Reverse Polarity detected */
+#define PHY_INT_JAB 0x0100 /* 1=Jabber detected */
+#define PHY_INT_SPDDET 0x0080 /* 1=100Base-TX mode, 0=10Base-T mode */
+#define PHY_INT_DPLXDET 0x0040 /* 1=Device in Full Duplex */
+
+/* PHY Interrupt/Status Mask Register */
+#define PHY_MASK_REG 0x13 /* Interrupt Mask */
+/* Uses the same bit definitions as PHY_INT_REG */
+
+
+
+/*-------------------------------------------------------------------------
+ . I define some macros to make it easier to do somewhat common
+ . or slightly complicated, repeated tasks.
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { SMC_outw( x, BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( IM_REG );\
+ mask |= (x);\
+ SMC_outb( mask, IM_REG ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( IM_REG );\
+ mask &= ~(x);\
+ SMC_outb( mask, IM_REG ); \
+}
+
+/*----------------------------------------------------------------------
+ . Define the interrupts that I want to receive from the card
+ .
+ . I want:
+ . IM_EPH_INT, for nasty errors
+ . IM_RCV_INT, for happy received packets
+ . IM_RX_OVRN_INT, because I have to kick the receiver
+ . IM_MDINT, for PHY Register 18 Status Changes
+ --------------------------------------------------------------------------*/
+#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
+ IM_MDINT)
+
+#endif /* _SMC_91111_H_ */
+