summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ax88180.c10
-rw-r--r--drivers/net/eepro100.c18
-rw-r--r--drivers/net/lan91c96.c10
-rw-r--r--drivers/net/smc91111.c22
4 files changed, 30 insertions, 30 deletions
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
index d13eb11187..2715653cd4 100644
--- a/drivers/net/ax88180.c
+++ b/drivers/net/ax88180.c
@@ -118,7 +118,7 @@ static int ax88180_phy_reset (struct eth_device *dev)
/* Wait for the reset to complete, or time out (500 ms) */
while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) {
- udelay (1000);
+ udelay(1000);
if (--delay_cnt == 0) {
printf ("Failed to reset PHY!\n");
return -1;
@@ -177,7 +177,7 @@ static int ax88180_poll_tx_complete (struct eth_device *dev)
if ((tmpval & txbs_txdp) == 0)
break;
- udelay (100);
+ udelay(100);
}
if (TimeOutCnt)
@@ -342,7 +342,7 @@ static void ax88180_media_config (struct eth_device *dev)
if (bmsr_val & BMSR_LSTATUS) {
break;
}
- udelay (100);
+ udelay(100);
}
bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
@@ -364,7 +364,7 @@ static void ax88180_media_config (struct eth_device *dev)
if (bmsr_val & BMSR_ANEGCOMPLETE) {
break;
}
- udelay (100);
+ udelay(100);
}
} else
debug ("ax88180: Auto-negotiation is disabled.\n");
@@ -680,7 +680,7 @@ static void ax88180_read_mac_addr (struct eth_device *dev)
tmp_regval = INW (dev, PROMCTRL);
if ((tmp_regval & RELOAD_EEPROM) == 0)
break;
- udelay (1000);
+ udelay(1000);
}
/* Get MAC addresses */
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 2fe0ba6e20..36a9d4d91c 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -462,7 +462,7 @@ int eepro100_initialize (bd_t * bis)
*/
pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
- udelay (10 * 1000);
+ udelay(10 * 1000);
read_hw_addr (dev, bis);
}
@@ -480,10 +480,10 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
/* Reset the ethernet controller
*/
OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
- udelay (20);
+ udelay(20);
OUTL (dev, I82559_RESET, SCBPort);
- udelay (20);
+ udelay(20);
if (!wait_for_eepro100 (dev)) {
printf ("Error: Can not reset ethernet controller.\n");
@@ -721,10 +721,10 @@ static void eepro100_halt (struct eth_device *dev)
/* Reset the ethernet controller
*/
OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
- udelay (20);
+ udelay(20);
OUTL (dev, I82559_RESET, SCBPort);
- udelay (20);
+ udelay(20);
if (!wait_for_eepro100 (dev)) {
printf ("Error: Can not reset ethernet controller.\n");
@@ -760,19 +760,19 @@ static int read_eeprom (struct eth_device *dev, int location, int addr_len)
short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
OUTW (dev, EE_ENB | dataval, SCBeeprom);
- udelay (1);
+ udelay(1);
OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay (1);
+ udelay(1);
}
OUTW (dev, EE_ENB, SCBeeprom);
for (i = 15; i >= 0; i--) {
OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom);
- udelay (1);
+ udelay(1);
retval = (retval << 1) |
((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0);
OUTW (dev, EE_ENB, SCBeeprom);
- udelay (1);
+ udelay(1);
}
/* Terminate the EEPROM access. */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c08bd21f95..1989b66a48 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -211,7 +211,7 @@ static void smc_reset(struct eth_device *dev)
SMC_SELECT_BANK(dev, 0);
SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
- udelay (10);
+ udelay(10);
/* Disable transmit and receive functionality */
SMC_outw(dev, 0, LAN91C96_RCR);
@@ -438,7 +438,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet,
/* wait for MMU getting ready (low) */
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (10);
+ udelay(10);
PRINTK2("MMU ready\n");
@@ -455,7 +455,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet,
/* wait for MMU getting ready (low) */
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (10);
+ udelay(10);
PRINTK2 ("MMU ready\n");
}
@@ -600,13 +600,13 @@ static int smc_rcv(struct eth_device *dev)
}
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
/* error or good, tell the card to get rid of this packet */
SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
if (!is_error) {
/* Pass the packet up to the protocol layers. */
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 5754c3106c..52bbf05a1e 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -266,7 +266,7 @@ static inline void smc_wait_mmu_release_complete (struct eth_device *dev)
/* assume bank 2 selected */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
if (++count > 200)
break;
}
@@ -318,7 +318,7 @@ static void smc_reset (struct eth_device *dev)
SMC_SELECT_BANK (dev, 0);
/* this should pause enough for the chip to be happy */
- udelay (10);
+ udelay(10);
/* Disable transmit and receive functionality */
SMC_outw (dev, RCR_CLEAR, RCR_REG);
@@ -333,7 +333,7 @@ static void smc_reset (struct eth_device *dev)
smc_wait_mmu_release_complete (dev);
SMC_outw (dev, MC_RESET, MMU_CMD_REG);
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
/* Note: It doesn't seem that waiting for the MMU busy is needed here,
but this is a place where future chipsets _COULD_ break. Be wary
@@ -564,7 +564,7 @@ again:
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (10);
+ udelay(10);
}
PRINTK2 ("MMU ready\n");
@@ -583,7 +583,7 @@ again:
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (10);
+ udelay(10);
}
PRINTK2 ("MMU ready\n");
@@ -957,19 +957,19 @@ static word smc_read_phy_register (struct eth_device *dev, byte phyreg)
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
@@ -1078,19 +1078,19 @@ static void smc_write_phy_register (struct eth_device *dev, byte phyreg,
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 00:33:25 +0000