summaryrefslogtreecommitdiff
path: root/drivers/net/sk98lin/skge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sk98lin/skge.c')
-rw-r--r--drivers/net/sk98lin/skge.c80
1 files changed, 40 insertions, 40 deletions
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 61a6094230..e1d7e8720c 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -3,7 +3,7 @@
* Name: skge.c
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.46 $
- * Date: $Date: 2003/02/25 14:16:36 $
+ * Date: $Date: 2003/02/25 14:16:36 $
* Purpose: The main driver source module
*
******************************************************************************/
@@ -348,7 +348,7 @@
#if 0
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
+#include <linux/proc_fs.h>
#endif
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
@@ -501,7 +501,7 @@ static struct pci_device_id supported[] = {
/*****************************************************************************
*
- * skge_probe - find all SK-98xx adapters
+ * skge_probe - find all SK-98xx adapters
*
* Description:
* This function scans the PCI bus for SK-98xx adapters. Resources for
@@ -646,7 +646,7 @@ int skge_probe (struct eth_device ** ret_dev)
dev->set_mac_address = &SkGeSetMacAddr;
dev->do_ioctl = &SkGeIoctl;
dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
+ dev->flags &= ~IFF_RUNNING;
#endif
#ifdef SK_ZEROCOPY
@@ -793,7 +793,7 @@ int skge_probe (struct eth_device ** ret_dev)
dev->set_mac_address = &SkGeSetMacAddr;
dev->do_ioctl = &SkGeIoctl;
dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
+ dev->flags &= ~IFF_RUNNING;
#endif
#ifdef SK_ZEROCOPY
@@ -857,7 +857,7 @@ int skge_probe (struct eth_device ** ret_dev)
/*****************************************************************************
*
- * FreeResources - release resources allocated for adapter
+ * FreeResources - release resources allocated for adapter
*
* Description:
* This function releases the IRQ, unmaps the IO and
@@ -992,7 +992,7 @@ static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */
/*****************************************************************************
*
- * skge_init_module - module initialization function
+ * skge_init_module - module initialization function
*
* Description:
* Very simple, only call skge_probe and return approriate result.
@@ -1020,7 +1020,7 @@ static int __init skge_init_module(void)
/*****************************************************************************
*
- * skge_cleanup_module - module unload function
+ * skge_cleanup_module - module unload function
*
* Description:
* Disable adapter if it is still running, free resources,
@@ -1098,7 +1098,7 @@ module_exit(skge_cleanup_module);
/*****************************************************************************
*
- * SkGeBoardInit - do level 0 and 1 initialization
+ * SkGeBoardInit - do level 0 and 1 initialization
*
* Description:
* This function prepares the board hardware for running. The desriptor
@@ -1262,7 +1262,7 @@ SK_BOOL DualNet;
/*****************************************************************************
*
- * BoardAllocMem - allocate the memory for the descriptor rings
+ * BoardAllocMem - allocate the memory for the descriptor rings
*
* Description:
* This function allocates the memory for all descriptor rings.
@@ -1360,7 +1360,7 @@ size_t AllocLength; /* length of complete descriptor area */
/*****************************************************************************
*
- * BoardInitMem - initiate the descriptor rings
+ * BoardInitMem - initiate the descriptor rings
*
* Description:
* This function sets the descriptor rings up in memory.
@@ -1408,7 +1408,7 @@ int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/
/*****************************************************************************
*
- * SetupRing - create one descriptor ring
+ * SetupRing - create one descriptor ring
*
* Description:
* This function creates one descriptor ring in the given memory area.
@@ -1477,7 +1477,7 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */
/*****************************************************************************
*
- * PortReInitBmu - re-initiate the descriptor rings for one port
+ * PortReInitBmu - re-initiate the descriptor rings for one port
*
* Description:
* This function reinitializes the descriptor rings of one port
@@ -1998,7 +1998,7 @@ struct SK_NET_DEVICE *dev)
/*****************************************************************************
*
- * SkGeXmit - Linux frame transmit function
+ * SkGeXmit - Linux frame transmit function
*
* Description:
* The system calls this function to send frames onto the wire.
@@ -2078,7 +2078,7 @@ int Rc; /* return code of XmitFrame */
/*****************************************************************************
*
- * XmitFrame - fill one socket buffer into the transmit ring
+ * XmitFrame - fill one socket buffer into the transmit ring
*
* Description:
* This function puts a message into the transmit descriptor ring
@@ -2099,7 +2099,7 @@ int Rc; /* return code of XmitFrame */
* < 0 - on failure: other problems ( -> return failure to upper layers)
*/
static int XmitFrame(
-SK_AC *pAC, /* pointer to adapter context */
+SK_AC *pAC, /* pointer to adapter context */
TX_PORT *pTxPort, /* pointer to struct of port to send to */
struct sk_buff *pMessage) /* pointer to send-message */
{
@@ -2186,7 +2186,7 @@ int BytesSend;
/*****************************************************************************
*
- * XmitFrameSG - fill one socket buffer into the transmit ring
+ * XmitFrameSG - fill one socket buffer into the transmit ring
* (use SG and TCP/UDP hardware checksumming)
*
* Description:
@@ -2201,12 +2201,12 @@ int BytesSend;
*/
#if 0
static int XmitFrameSG(
-SK_AC *pAC, /* pointer to adapter context */
+SK_AC *pAC, /* pointer to adapter context */
TX_PORT *pTxPort, /* pointer to struct of port to send to */
struct sk_buff *pMessage) /* pointer to send-message */
{
- int i;
+ int i;
int BytesSend;
int hlength;
int protocol;
@@ -2374,7 +2374,7 @@ void dump_frag( SK_U8 *data, int length)
/*****************************************************************************
*
- * FreeTxDescriptors - release descriptors from the descriptor ring
+ * FreeTxDescriptors - release descriptors from the descriptor ring
*
* Description:
* This function releases descriptors from a transmit ring if they
@@ -2444,7 +2444,7 @@ SK_U64 PhysAddr; /* address of DMA mapping */
/*****************************************************************************
*
- * FillRxRing - fill the receive ring with valid descriptors
+ * FillRxRing - fill the receive ring with valid descriptors
*
* Description:
* This function fills the receive ring descriptors with data
@@ -2476,7 +2476,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * FillRxDescriptor - fill one buffer into the receive ring
+ * FillRxDescriptor - fill one buffer into the receive ring
*
* Description:
* The function allocates a new receive buffer and
@@ -2532,7 +2532,7 @@ SK_U64 PhysAddr; /* physical address of a rx buffer */
/*****************************************************************************
*
- * ReQueueRxBuffer - fill one buffer back into the receive ring
+ * ReQueueRxBuffer - fill one buffer back into the receive ring
*
* Description:
* Fill a given buffer back into the rx ring. The buffer
@@ -2566,7 +2566,7 @@ SK_U16 Length; /* data fragment length */
/*****************************************************************************
*
- * ReceiveIrq - handle a receive IRQ
+ * ReceiveIrq - handle a receive IRQ
*
* Description:
* This function is called when a receive IRQ is set.
@@ -2598,7 +2598,7 @@ unsigned int NumBytes;
unsigned int ForRlmt;
SK_BOOL IsBc;
SK_BOOL IsMc;
-SK_BOOL IsBadFrame; /* Bad frame */
+SK_BOOL IsBadFrame; /* Bad frame */
SK_U32 FrameStat;
unsigned short Csum1;
@@ -2935,7 +2935,7 @@ rx_failed:
/*****************************************************************************
*
- * ClearAndStartRx - give a start receive command to BMU, clear IRQ
+ * ClearAndStartRx - give a start receive command to BMU, clear IRQ
*
* Description:
* This function sends a start command and a clear interrupt
@@ -2955,7 +2955,7 @@ int PortIndex) /* index of the receive port (XMAC) */
/*****************************************************************************
*
- * ClearTxIrq - give a clear transmit IRQ command to BMU
+ * ClearTxIrq - give a clear transmit IRQ command to BMU
*
* Description:
* This function sends a clear tx IRQ command for one
@@ -2975,7 +2975,7 @@ int Prio) /* priority or normal queue */
/*****************************************************************************
*
- * ClearRxRing - remove all buffers from the receive ring
+ * ClearRxRing - remove all buffers from the receive ring
*
* Description:
* This function removes all receive buffers from the ring.
@@ -3052,7 +3052,7 @@ unsigned long Flags;
#if 0
/*****************************************************************************
*
- * SetQueueSizes - configure the sizes of rx and tx queues
+ * SetQueueSizes - configure the sizes of rx and tx queues
*
* Description:
* This function assigns the sizes for active and passive port
@@ -3145,7 +3145,7 @@ if (pAC->RlmtNets == 1) {
/*****************************************************************************
*
- * SkGeSetMacAddr - Set the hardware MAC address
+ * SkGeSetMacAddr - Set the hardware MAC address
*
* Description:
* This function sets the MAC address used by the adapter.
@@ -3188,7 +3188,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * SkGeSetRxMode - set receive mode
+ * SkGeSetRxMode - set receive mode
*
* Description:
* This function sets the receive mode of an adapter. The adapter
@@ -3264,7 +3264,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * SkGeChangeMtu - set the MTU to another value
+ * SkGeChangeMtu - set the MTU to another value
*
* Description:
* This function sets is called whenever the MTU size is changed
@@ -3282,7 +3282,7 @@ DEV_NET *pOtherNet;
SK_AC *pAC;
unsigned long Flags;
int i;
-SK_EVPARA EvPara;
+SK_EVPARA EvPara;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeChangeMtu starts now...\n"));
@@ -3487,7 +3487,7 @@ SK_EVPARA EvPara;
/*****************************************************************************
*
- * SkGeStats - return ethernet device statistics
+ * SkGeStats - return ethernet device statistics
*
* Description:
* This function return statistic data about the ethernet device
@@ -3560,7 +3560,7 @@ unsigned long Flags; /* for spin lock */
/*****************************************************************************
*
- * SkGeIoctl - IO-control function
+ * SkGeIoctl - IO-control function
*
* Description:
* This function is called if an ioctl is issued on the device.
@@ -3619,7 +3619,7 @@ int Size;
/*****************************************************************************
*
- * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
+ * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
*
* Description:
* This function reads/writes the MIB data using PNMI (Private Network
@@ -3673,7 +3673,7 @@ SK_AC *pAC;
/*****************************************************************************
*
- * GetConfiguration - read configuration information
+ * GetConfiguration - read configuration information
*
* Description:
* This function reads per-adapter configuration information from
@@ -3717,7 +3717,7 @@ int Capabilities[3][3] =
/* settings for port A */
/* settings link speed */
- LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
Speed_A[pAC->Index] != NULL) {
if (strcmp(Speed_A[pAC->Index],"")==0) {
@@ -3876,7 +3876,7 @@ int Capabilities[3][3] =
/* settings for port B */
/* settings link speed */
- LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
Speed_B[pAC->Index] != NULL) {
if (strcmp(Speed_B[pAC->Index],"")==0) {
@@ -4100,7 +4100,7 @@ int Capabilities[3][3] =
/*****************************************************************************
*
- * ProductStr - return a adapter identification string from vpd
+ * ProductStr - return a adapter identification string from vpd
*
* Description:
* This function reads the product name string from the vpd area