summaryrefslogtreecommitdiff
path: root/drivers/net/npe/include/IxAtmdAccCtrl.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/npe/include/IxAtmdAccCtrl.h')
-rw-r--r--drivers/net/npe/include/IxAtmdAccCtrl.h1958
1 files changed, 1958 insertions, 0 deletions
diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h
new file mode 100644
index 0000000000..50ef582f73
--- /dev/null
+++ b/drivers/net/npe/include/IxAtmdAccCtrl.h
@@ -0,0 +1,1958 @@
+
+/**
+ * @file IxAtmdAccCtrl.h
+ *
+ * @date 20-Mar-2002
+ *
+ * @brief IxAtmdAcc Public API
+ *
+ * This file contains the public API of IxAtmdAcc, related to the
+ * control functions of the component.
+ *
+ *
+ * @par
+ * IXP400 SW Release version 2.0
+ *
+ * -- Copyright Notice --
+ *
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ *
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @par
+ * -- End of Copyright Notice --
+ */
+
+/* ------------------------------------------------------
+ Doxygen group definitions
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API
+ *
+ * @brief The public API for the IXP400 Atm Driver Control component
+ *
+ * IxAtmdAcc is the low level interface by which AAL PDU get transmitted
+ * to,and received from the Utopia bus
+ *
+ * This part is related to the Control configuration
+ *
+ * @{
+ */
+
+#ifndef IXATMDACCCTRL_H
+#define IXATMDACCCTRL_H
+
+#include "IxAtmdAcc.h"
+
+/* ------------------------------------------------------
+ AtmdAccCtrl Data Types definition
+ ------------------------------------------------------ */
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS
+*
+* @brief Port enable return code
+*
+* This constant is used to tell IxAtmDAcc user that the port disable
+* functions are not complete. The user can call ixAtmdAccPortDisableComplete()
+* to find out when the disable has finished. The port enable can then proceed.
+*
+*/
+#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @def IX_ATMDACC_ALLPDUS
+*
+* @brief All PDUs
+*
+* This constant is used to tell IxAtmDAcc to process all PDUs from
+* the RX queue or the TX Done
+*
+* @sa IxAtmdAccRxDispatcher
+* @sa IxAtmdAccTxDoneDispatcher
+*
+*/
+#define IX_ATMDACC_ALLPDUS 0xffffffff
+
+/* ------------------------------------------------------
+ Part of the IxAtmdAcc interface related to RX traffic
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @brief Callback prototype for notification of available PDUs for
+ * an Rx Q.
+ *
+ * This a protoype for a function which is called when there is at
+ * least one Pdu available for processing on a particular Rx Q.
+ *
+ * This function should call @a ixAtmdAccRxDispatch() with
+ * the aprropriate number of parameters to read and process the Rx Q.
+ *
+ * @sa ixAtmdAccRxDispatch
+ * @sa ixAtmdAccRxVcConnect
+ * @sa ixAtmdAccRxDispatcherRegister
+ *
+ * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process.
+ * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of
+ * PDUs available to process all PDUs from the queue.
+ * @param reservedPtr unsigned int* [out] pointer to a int location which can
+ * be written to, but does not retain written values. This is
+ * provided to make this prototype compatible
+ * with @a ixAtmdAccRxDispatch()
+ *
+ * @return @li int - ignored.
+ *
+ */
+typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId,
+ unsigned int numberOfPdusToProcess,
+ unsigned int *reservedPtr);
+
+/* ------------------------------------------------------
+ Part of the IxAtmdAcc interface related to TX traffic
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @brief Callback prototype for transmitted mbuf when threshold level is
+ * crossed.
+ *
+ * IxAtmdAccTxDoneDispatcher is the prototype of the user function
+ * which get called when pdus are completely transmitted. This function
+ * is likely to call the @a ixAtmdAccTxDoneDispatch() function.
+ *
+ * This function is called when the number of available pdus for
+ * reception is crossing the threshold level as defined
+ * in @a ixAtmdAccTxDoneDispatcherRegister()
+ *
+ * This function is called inside an Qmgr dispatch context. No system
+ * resource or interrupt-unsafe feature should be used inside this
+ * callback.
+ *
+ * Transmitted buffers recycling implementation is a sytem-wide mechanism
+ * and needs to be set before any traffic is started. If this threshold
+ * mechanism is not used, the user is responsible for polling the
+ * transmitted buffers with @a ixAtmdAccTxDoneDispatch()
+ * and @a ixAtmdAccTxDoneLevelQuery() functions.
+ *
+ * @sa ixAtmdAccTxDoneDispatcherRegister
+ * @sa ixAtmdAccTxDoneDispatch
+ * @sa ixAtmdAccTxDoneLevelQuery
+ *
+ * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently
+ * available for recycling
+ * @param *reservedPtr unsigned int [out] - pointer to a int location which can be
+ * written to but does not retain written values. This is provided
+ * to make this prototype compatible
+ * with @a ixAtmdAccTxDoneDispatch()
+ *
+ * @return @li IX_SUCCESS This is provided to make
+ * this prototype compatible with @a ixAtmdAccTxDoneDispatch()
+ * @return @li IX_FAIL invalid parameters or some unspecified internal
+ * error occured. This is provided to make
+ * this prototype compatible with @a ixAtmdAccTxDoneDispatch()
+ *
+ */
+typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess,
+ unsigned int *reservedPtr);
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @brief Notification that the threshold number of scheduled cells
+* remains in a port's transmit Q.
+*
+* The is the prototype for of the user notification function which
+* gets called on a per-port basis, when the number of remaining
+* scheduled cells to be transmitted decreases to the threshold level.
+* The number of cells passed as a parameter can be used for scheduling
+* purposes as the maximum number of cells that can be passed in a
+* schedule table to the @a ixAtmdAccPortTxProcess() function.
+*
+* @sa ixAtmdAccPortTxCallbackRegister
+* @sa ixAtmdAccPortTxProcess
+* @sa ixAtmdAccPortTxFreeEntriesQuery
+*
+* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+* @param numberOfAvailableCells unsigned int [in] - number of available
+* cell entries.for the port
+*
+* @note - This functions shall not use system resources when used
+* inside an interrupt context.
+*
+*/
+typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port,
+ unsigned int numberOfAvailableCells);
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @brief Prototype to submit cells for transmission
+*
+* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback
+* function used by AtmD to notify an ATM Scheduler that the user of
+* a VC has submitted cells for transmission.
+*
+* @sa IxAtmdAccTxVcDemandUpdateCallback
+* @sa IxAtmdAccTxVcDemandClearCallback
+* @sa IxAtmdAccTxSchVcIdGetCallback
+* @sa ixAtmdAccPortTxScheduledModeEnable
+*
+* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated
+* is established
+* @param vcId int [in] - Identifies the VC to be updated. This is the value
+* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
+* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added
+* to the queue for this VC.
+*
+* @return @li IX_SUCCESS the function is registering the cell demand for
+* this VC.
+* @return @li IX_FAIL the function cannot register cell for this VC : the
+* scheduler maybe overloaded or misconfigured
+*
+*/
+typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port,
+ int vcId,
+ unsigned int numberOfCells);
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @brief prototype to remove all currently queued cells from a
+* registered VC
+*
+* IxAtmdAccTxVcDemandClearCallback is the prototype of the function
+* to remove all currently queued cells from a registered VC. The
+* pending cell count for the specified VC is reset to zero. After the
+* use of this callback, the scheduler shall not schedule more cells
+* for this VC.
+*
+* This callback function is called during a VC disconnection
+* @a ixAtmdAccTxVcTryDisconnect()
+*
+* @sa IxAtmdAccTxVcDemandUpdateCallback
+* @sa IxAtmdAccTxVcDemandClearCallback
+* @sa IxAtmdAccTxSchVcIdGetCallback
+* @sa ixAtmdAccPortTxScheduledModeEnable
+* @sa ixAtmdAccTxVcTryDisconnect
+*
+* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared
+* is established
+* @param vcId int [in] - Identifies the VC to be cleared. This is the value
+* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
+*
+* @return none
+*
+*/
+typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port,
+ int vcId);
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @brief prototype to get a scheduler vc id
+*
+* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get
+* a scheduler vcId
+*
+* @sa IxAtmdAccTxVcDemandUpdateCallback
+* @sa IxAtmdAccTxVcDemandClearCallback
+* @sa IxAtmdAccTxSchVcIdGetCallback
+* @sa ixAtmdAccPortTxScheduledModeEnable
+*
+* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is
+* established
+* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the
+* VC is established.
+* For OAM specifies the dedicated "OAM Tx channel" VPI.
+* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the
+* VC is established.
+* For OAM specifies the dedicated "OAM Tx channel" VCI.
+* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already
+* associated with this VC
+* @param vcId int* [out] - pointer to a vcId
+*
+* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this
+* VC
+* @return @li IX_FAIL the function cannot process scheduling for this VC.
+* the contents of vcId is unspecified
+*
+*/
+typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port,
+ unsigned int vpi,
+ unsigned int vci,
+ IxAtmConnId connId,
+ int *vcId);
+
+/* ------------------------------------------------------
+ Part of the IxAtmdAcc interface related to RX traffic
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccRxDispatcherRegister (
+ IxAtmRxQueueId queueId,
+ IxAtmdAccRxDispatcher callback)
+ *
+ * @brief Register a notification callback to be invoked when there is
+ * at least one entry on a particular Rx queue.
+ *
+ * This function registers a callback to be invoked when there is at
+ * least one entry in a particular queue. The registered callback is
+ * called every time when the hardware adds one or more pdus to the
+ * specified Rx queue.
+ *
+ * This function cannot be used when a Rx Vc using this queue is
+ * already existing.
+ *
+ * @note -The callback function can be the API function
+ * @a ixAtmdAccRxDispatch() : every time the threhold level
+ * of the queue is reached, the ixAtmdAccRxDispatch() is
+ * invoked to remove all entries from the queue.
+ *
+ * @sa ixAtmdAccRxDispatch
+ * @sa IxAtmdAccRxDispatcher
+ *
+ * @param queueId @ref IxAtmRxQueueId [in] RX queue identification
+ * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming
+ * traffic. This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister()
+ * @return @li IX_FAIL error in the parameters, or there is an
+ * already active RX VC for this queue or some unspecified
+ * internal error occurred.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister (
+ IxAtmRxQueueId queueId,
+ IxAtmdAccRxDispatcher callback);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
+ unsigned int numberOfPdusToProcess,
+ unsigned int *numberOfPdusProcessedPtr)
+ *
+ *
+ * @brief Control function which executes Rx processing for a particular
+ * Rx stream.
+ *
+ * The @a IxAtmdAccRxDispatch() function is used to process received Pdus
+ * available from one of the two incoming RX streams. When this function
+ * is invoked, the incoming traffic (up to the number of PDUs passed as
+ * a parameter) will be transferred to the IxAtmdAcc users through the
+ * callback @a IxAtmdAccRxVcRxCallback(), as registered during the
+ * @a ixAtmdAccRxVcConnect() call.
+ *
+ * The user receive callbacks will be executed in the context of this
+ * function.
+ *
+ * Failing to use this function on a regular basis when there is traffic
+ * will block incoming traffic and can result in Pdus being dropped by
+ * the hardware.
+ *
+ * This should be used to control when received pdus are handed off from
+ * the hardware to Aal users from a particluar stream. The function can
+ * be used from a timer context, or can be registered as a callback in
+ * response to an rx stream threshold event, or can be used inside an
+ * active polling mechanism which is under user control.
+ *
+ * @note - The signature of this function is directly compatible with the
+ * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister().
+ *
+ * @sa ixAtmdAccRxDispatcherRegister
+ * @sa IxAtmdAccRxVcRxCallback
+ * @sa ixAtmdAccRxVcFreeEntriesQuery
+ *
+ * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process.
+ * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to
+ * remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates
+ * to process all PDUs from the queue. This includes at least the PDUs
+ * in the queue when the fuction is invoked. Because of real-time
+ * constraints, there is no guarantee thatthe queue will be empty
+ * when the function exits. If this parameter is greater than the
+ * number of entries of the queues, the function will succeed
+ * and the parameter numberOfPdusProcessedPtr will reflect the exact
+ * number of PDUs processed.
+ * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU
+ * processed during this call. This parameter cannot be a null
+ * pointer.
+ *
+ * @return @li IX_SUCCESS the number of PDUs as indicated in
+ * numberOfPdusProcessedPtr are removed from the RX queue and the VC callback
+ * are called.
+ * @return @li IX_FAIL invalid parameters or some unspecified internal
+ * error occured.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
+ unsigned int numberOfPdusToProcess,
+ unsigned int *numberOfPdusProcessedPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
+ unsigned int *numberOfPdusPtr)
+ *
+ * @brief Query the number of entries in a particular RX queue.
+ *
+ * This function is used to retrieve the number of pdus received by
+ * the hardware and ready for distribution to users.
+ *
+ * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
+ * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available
+ * PDUs in the RX queue. This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
+ * number of incoming pdus waiting in this queue
+ * @return @li IX_FAIL an error occurs during processing.
+ * The value in numberOfPdusPtr is unspecified.
+ *
+ * @note - This function is reentrant, doesn't use system resources
+ * and can be used from an interrupt context.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
+ unsigned int *numberOfPdusPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
+ unsigned int *numberOfPdusPtr)
+ *
+ * @brief Query the size of a particular RX queue.
+ *
+ * This function is used to retrieve the number of pdus the system is
+ * able to queue when reception is complete.
+ *
+ * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
+ * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus
+ * the system is able to queue in the RX queue. This parameter
+ * cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
+ * number of pdus the system is able to queue.
+ * @return @li IX_FAIL an error occurs during processing.
+ * The value in numberOfPdusPtr is unspecified.
+ *
+ * @note - This function is reentrant, doesn't use system resources
+ * and can be used from an interrupt context.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
+ unsigned int *numberOfPdusPtr);
+
+/* ------------------------------------------------------
+ Part of the IxAtmdAcc interface related to TX traffic
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
+ unsigned int *numberOfCellsPtr)
+ *
+ * @brief Get the number of available cells the system can accept for
+ * transmission.
+ *
+ * The function is used to retrieve the number of cells that can be
+ * queued for transmission to the hardware.
+ *
+ * This number is based on the worst schedule table where one cell
+ * is stored in one schedule table entry, depending on the pdus size
+ * and mbuf size and fragmentation.
+ *
+ * This function doesn't use system resources and can be used from a
+ * timer context, or can be associated with a threshold event, or can
+ * be used inside an active polling mechanism
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ * @param numberOfCellsPtr unsigned int* [out] - number of available cells.
+ * This parameter cannot be a null pointer.
+ *
+ * @sa ixAtmdAccPortTxProcess
+ *
+ * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled
+ * for this port.
+ * @return @li IX_FAIL error in the parameters, or some processing error
+ * occured.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
+ unsigned int *numberOfCellsPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
+ unsigned int numberOfCells,
+ IxAtmdAccPortTxLowCallback callback)
+ *
+ * @brief Configure the Tx port threshold value and register a callback to handle
+ * threshold notifications.
+ *
+ * This function sets the threshold in cells
+ *
+ * @sa ixAtmdAccPortTxCallbackRegister
+ * @sa ixAtmdAccPortTxProcess
+ * @sa ixAtmdAccPortTxFreeEntriesQuery
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ * @param numberOfCells unsigned int [in] - threshold value which triggers the callback
+ * invocation, This number has to be one of the
+ * values 0,1,2,4,8,16,32 ....
+ * The maximum value cannot be more than half of the txVc queue
+ * size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery()
+ * before any Tx traffic is sent for this port)
+ * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold
+ * level is reached.
+ * This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister()
+ * @return @li IX_FAIL error in the parameters, Tx channel already set for this port
+ * threshold level is not correct or within the range regarding the
+ * queue size:or unspecified error during processing:
+ *
+ * @note - This callback function get called when the threshold level drops from
+ * (numberOfCells+1) cells to (numberOfCells) cells
+ *
+ * @note - This function should be called during system initialisation,
+ * outside an interrupt context
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
+ unsigned int numberOfCells,
+ IxAtmdAccPortTxLowCallback callback);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
+ IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
+ IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
+ IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback)
+ *
+ * @brief Put the port into Scheduled Mode
+ *
+ * This function puts the specified port into scheduled mode of
+ * transmission which means an external s/w entity controls the
+ * transmission of cells on this port. This faciltates traffic shaping on
+ * the port.
+ *
+ * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc.
+ * The transmission of these buffers to and by the hardware will be driven
+ * by a transmit schedule submitted regulary in calls to
+ * @a ixAtmdAccPortTxProcess() by traffic shaping entity.
+ *
+ * The transmit schedule is expected to be dynamic in nature based on
+ * the demand in cells for each VC on the port. Hence the callback
+ * parameters provided to this function allow IxAtmdAcc to inform the
+ * shaping entity of demand changes for each VC on the port.
+ *
+ * By default a port is in Unscheduled Mode so if this function is not
+ * called, transmission of data is done without sheduling rules, on a
+ * first-come, first-out basis.
+ *
+ * Once a port is put in scheduled mode it cannot be reverted to
+ * un-scheduled mode. Note that unscheduled mode is not supported
+ * in ixp425 1.0
+ *
+ * @note - This function should be called before any VCs have be
+ * connected on a port. Otherwise this function call will return failure.
+ *
+ * @note - This function uses internal locks and should not be called from
+ * an interrupt context
+ *
+ * @sa IxAtmdAccTxVcDemandUpdateCallback
+ * @sa IxAtmdAccTxVcDemandClearCallback
+ * @sa IxAtmdAccTxSchVcIdGetCallback
+ * @sa ixAtmdAccPortTxProcess
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update
+ * the number of outstanding cells for transmission. This parameter
+ * cannot be a null pointer.
+ * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all
+ * clear the number of outstanding cells for a VC. This parameter
+ * cannot be a null pointer.
+ * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc
+ * Identifiers between IxAtmdAcc and the entity supplying the
+ * transmit schedule. This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS scheduler registration is complete and the port
+ * is now in scheduled mode.
+ * @return @li IX_FAIL failed (wrong parameters, or traffic is already
+ * enabled on this port, possibly without ATM shaping)
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
+ IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
+ IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
+ IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
+ IxAtmScheduleTable* scheduleTablePtr)
+ *
+ * @brief Transmit queue cells to the H/W based on the supplied schedule
+ * table.
+ *
+ * This function @a ixAtmdAccPortTxProcess() process the schedule
+ * table provided as a parameter to the function. As a result cells are
+ * sent to the underlaying hardware for transmission.
+ *
+ * The schedule table is executed in its entirety or not at all. So the
+ * onus is on the caller not to submit a table containing more cells than
+ * can be transmitted at that point. The maximum numbers that can be
+ * transmitted is guaranteed to be the number of cells as returned by the
+ * function @a ixAtmdAccPortTxFreeEntriesQuery().
+ *
+ * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the
+ * minimum number of cells (to ensure the callback will fire again later)
+ * and the maximum number of cells that @a ixAtmdAccPortTxProcess()
+ * will be able to process (assuming the ATM scheduler is able
+ * to produce the worst-case schedule table, i.e. one entry per cell).
+ *
+ * When invoked ouside a threshold level, the overall number of cells of
+ * the schedule table should be less than the number of cells returned
+ * by the @a ixAtmdAccPortTxFreeEntriesQuery() function.
+ *
+ * After invoking the @a ixAtmdAccPortTxProcess() function, it is the
+ * user choice to query again the queue level with the function
+ * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell
+ * number, submit an other schedule table.
+ *
+ * IxAtmdAcc will check that the number of cells in the schedule table
+ * is compatible with the current transmit level. If the
+ *
+ * Obsolete or invalid connection Id will be silently discarded.
+ *
+ * This function is not reentrant for the same port.
+ *
+ * This functions doesn't use system resources and can be used inside an
+ * interrupt context.
+ *
+ * This function is used as a response to the hardware requesting more
+ * cells to transmit.
+ *
+ * @sa ixAtmdAccPortTxScheduledModeEnable
+ * @sa ixAtmdAccPortTxFreeEntriesQuery
+ * @sa ixAtmdAccPortTxCallbackRegister
+ * @sa ixAtmdAccPortEnable
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The
+ * content of this table is not modified by this function. This
+ * parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS the schedule table process is complete
+ * and cells are transmitted to the hardware
+ * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed
+ * the hardware capacity If this error is ignored, further traffic
+ * and schedule will work correctly.
+ * Overscheduling does not occur when the schedule table does
+ * not contain more entries that the number of free entries returned
+ * by @a ixAtmdAccPortTxFreeEntriesQuery().
+ * However, Disconnect attempts just after this error will fail permanently
+ * with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is
+ * necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect()
+ * successful.
+ * @return @li IX_FAIL a wrong parameter is supplied, or the format of
+ * the schedule table is invalid, or the port is not Enabled, or
+ * an internal severe error occured. No cells is transmitted to the hardware
+ *
+ * @note - If the failure is linked to an overschedule of data cells
+ * the result is an inconsistency in the output traffic (one or many
+ * cells may be missing and the traffic contract is not respected).
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
+ IxAtmScheduleTable* scheduleTablePtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
+ unsigned int *numberOfPdusProcessedPtr)
+ *
+ * @brief Process a number of pending transmit done pdus from the hardware.
+ *
+ * As a by-product of Atm transmit operation buffers which transmission
+ * is complete need to be recycled to users. This function is invoked
+ * to service the oustanding list of transmitted buffers and pass them
+ * to VC users.
+ *
+ * Users are handed back pdus by invoking the free callback registered
+ * during the @a ixAtmdAccTxVcConnect() call.
+ *
+ * There is a single Tx done stream servicing all active Atm Tx ports
+ * which can contain a maximum of 64 entries. If this stream fills port
+ * transmission will stop so this function must be call sufficently
+ * frequently to ensure no disruption to the transmit operation.
+ *
+ * This function can be used from a timer context, or can be associated
+ * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ),
+ * or can be used inside an active polling mechanism under user control.
+ *
+ * For ease of use the signature of this function is compatible with the
+ * TxDone threshold event callback prototype.
+ *
+ * This functions can be used inside an interrupt context.
+ *
+ * @sa ixAtmdAccTxDoneDispatcherRegister
+ * @sa IxAtmdAccTxVcBufferReturnCallback
+ * @sa ixAtmdAccTxDoneLevelQuery
+ *
+ * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove
+ * from the TX Done queue
+ * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from
+ * the TX Done queue. This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS the number of pdus as indicated in
+ * numberOfPdusToProcess are removed from the TX Done hardware
+ * and passed to the user through the Tx Done callback registered
+ * during a call to @a ixAtmdAccTxVcConnect()
+ * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is
+ * a null pointer or some unspecified internal error occured.
+ *
+ */
+PUBLIC IX_STATUS
+ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
+ unsigned int *numberOfPdusProcessedPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr)
+ *
+ * @brief Query the current number of transmit pdus ready for
+ * recycling.
+ *
+ * This function is used to get the number of transmitted pdus which
+ * the hardware is ready to hand back to user.
+ *
+ * This function can be used from a timer context, or can be associated
+ * with a threshold event, on can be used inside an active polling
+ * mechanism
+ *
+ * @sa ixAtmdAccTxDoneDispatch
+ *
+ * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted
+ * at the time of this function call, and ready for recycling
+ * This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus
+ * ready for recycling at the time of this function call
+ *
+ * @return @li IX_FAIL wrong parameter (null pointer as parameter).or
+ * unspecified rocessing error occurs..The value in numberOfPdusPtr
+ * is unspecified.
+ *
+ */
+PUBLIC IX_STATUS
+ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr)
+ *
+ * @brief Query the TxDone queue size.
+ *
+ * This function is used to get the number of pdus which
+ * the hardware is able to store after transmission is complete
+ *
+ * The returned value can be used to set a threshold and enable
+ * a callback to be notified when the number of pdus is going over
+ * the threshold.
+ *
+ * @sa ixAtmdAccTxDoneDispatcherRegister
+ *
+ * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system
+ * is able to queue after transmission
+ *
+ * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of
+ * pdus the system is able to queue after transmission
+ * @return @li IX_FAIL wrong parameter (null pointer as parameter).or
+ * unspecified rocessing error occurs..The value in numberOfPdusPtr
+ * is unspecified.
+ *
+ * @note - This function is reentrant, doesn't use system resources
+ * and can be used from an interrupt context.
+ */
+PUBLIC IX_STATUS
+ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
+ IxAtmdAccTxDoneDispatcher notificationCallback)
+ *
+ * @brief Configure the Tx Done stream threshold value and register a
+ * callback to handle threshold notifications.
+ *
+ * This function sets the threshold level in term of number of pdus at
+ * which the supplied notification function should be called.
+ *
+ * The higher the threshold value is, the less events will be necessary
+ * to process transmitted buffers.
+ *
+ * Transmitted buffers recycling implementation is a sytem-wide mechanism
+ * and needs to be set prior any traffic is started. If this threshold
+ * mechanism is not used, the user is responsible for polling the
+ * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and
+ * @a ixAtmdAccTxDoneLevelQuery() functions.
+ *
+ * This function should be called during system initialisation outside
+ * an interrupt context
+ *
+ * @sa ixAtmdAccTxDoneDispatcherRegister
+ * @sa ixAtmdAccTxDoneDispatch
+ * @sa ixAtmdAccTxDoneLevelQuery
+ *
+ * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the
+ * callback invocation This number has to be a power of 2, one of the
+ * values 0,1,2,4,8,16,32 ...
+ * The maximum value cannot be more than half of the txDone queue
+ * size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery())
+ * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This
+ * parameter can be @a ixAtmdAccTxDoneDispatch()).This
+ * parameter ust not be a null pointer.
+ *
+ * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister
+ * @return @li IX_FAIL error in the parameters:
+ *
+ * @note - The notificationCallback will be called exactly when the threshold level
+ * will increase from (numberOfPdus) to (numberOfPdus+1)
+ *
+ * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will
+ * be released to the user (when txDone level is permanently under the threshold
+ * level. One of the preffered way to return resources to the user is to use
+ * a mix of txDone notifications, used together with a slow
+ * rate timer and an exclusion mechanism protecting from re-entrancy
+ *
+ * @note - The TxDone threshold will only hand back buffers when the threshold level is
+ * crossed. Setting this threshold to a great number reduce the interrupt rate
+ * and the cpu load, but also increase the number of outstanding mbufs and has
+ * a system wide impact when these mbufs are needed by other components.
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
+ IxAtmdAccTxDoneDispatcher notificationCallback);
+
+/* ------------------------------------------------------
+ Part of the IxAtmdAcc interface related to Utopia config
+ ------------------------------------------------------ */
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API
+ *
+ * @brief The public API for the IXP400 Atm Driver Control component
+ *
+ * IxAtmdAcc is the low level interface by which AAL PDU get
+ * transmitted to,and received from the Utopia bus
+ *
+ * This part is related to the UTOPIA configuration.
+ *
+ * @{
+ */
+
+/**
+ *
+ * @brief Utopia configuration
+ *
+ * This structure is used to set the Utopia parameters
+ * @li contains the values of Utopia registers, to be set during initialisation
+ * @li contains debug commands for NPE, to be used during development steps
+ *
+ * @note - the exact description of all parameters is done in the Utopia reference
+ * documents.
+ *
+ */
+typedef struct
+{
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxConfig_
+ * @brief Utopia Tx Config Register
+ */
+ struct UtTxConfig_
+ {
+
+ unsigned int reserved_1:1; /**< [31] These bits are always 0.*/
+ unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding
+ * is used to set the Utopia Transmit interface as ATM master
+ * or PHY slave:
+ * @li 1 - PHY
+ * @li 0 - ATM
+ */
+ unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used
+ * to set the Utopia Transmit mode to SPHY or MPHY:
+ * @li 1 - SPHY
+ * @li 0 - MPHY
+ */
+ unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set
+ * the Utopia cell transfer protocol to Octet-level handshaking.
+ * Note this is only applicable in SPHY mode.
+ * @li 1 - Octet-handshaking enabled
+ * @li 0 - Cell-handshaking enabled
+ */
+ unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity
+ * defines the parity format odd/even.
+ * @li 1 - Enable Parity generation.
+ * @li 0 - ut_op_prty held low.
+ */
+ unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode
+ * @li 1 - Even Parity Generated.
+ * @li 0 - Odd Parity Generated.
+ */
+ unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit
+ * cell header check byte is calculated and inserted when set.
+ * @li 1 - Generate HEC.
+ * @li 0 - Disable HEC generation.
+ */
+ unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
+ * being presented on the Utopia bus.
+ * @li 1 - Enable HEC ExOR with value 0x55
+ * @li 0 - Use generated HEC value.
+ */
+
+ unsigned int reserved_2:1; /**< [23] These bits are always 0
+ */
+ unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size
+ * for the transmit module: Values between 52-64 are valid.
+ */
+ unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */
+ unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this
+ * register specifies the upper limit of the PHY polling logical
+ * range. The number of active PHYs are TxAddrRange + 1.
+ */
+ unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */
+ unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register
+ * specifies the physical address of the PHY.
+ */
+ }
+
+ utTxConfig; /**< Tx config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxStatsConfig_
+ * @brief Utopia Tx stats Register
+ */
+ struct UtTxStatsConfig_
+ {
+
+ unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
+ @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */
+
+ unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */
+
+ unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1]
+ @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test.
+ @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
+ address as defined by this register is used for ATM statistics [4:0]. */
+
+ unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0]
+ @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test.
+ @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
+ address as defined by this register is used for ATM statistics [4:0]. */
+ }
+
+ utTxStatsConfig; /**< Tx stats config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxDefineIdle_
+ * @brief Utopia Tx idle cells Register
+ */
+ struct UtTxDefineIdle_
+ {
+
+ unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
+ @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */
+
+ unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */
+
+ unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0]
+ @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/
+
+ unsigned int clp:1; /**< [0] ATM CLP [0]
+ @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/
+ }
+
+ utTxDefineIdle; /**< Tx idle cell config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxEnableFields_
+ * @brief Utopia Tx ienable fields Register
+ */
+ struct UtTxEnableFields_
+ {
+
+ unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC
+ field of the ATM header when testing for Idle cells.
+ @li 1 - GFC field is valid.
+ @li 0 - GFC field ignored.*/
+
+ unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI
+ field of the ATM header when testing for Idle cells.
+ @li 1 - PTI field is valid
+ @li 0 - PTI field ignored.*/
+
+ unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or
+ exclude the CLP field of the ATM header when testing for Idle cells.
+ @li 1 - CLP field is valid.
+ @li 0 - CLP field ignored. */
+
+ unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM
+ statistics gathering based on the specified PHY address as defined
+ in TxStatsConfig register.
+ @li 1 - Enable statistics for specified transmit PHY address.
+ @li 0 - Disable statistics for specified transmit PHY address. */
+
+ unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM
+ statistics-gathering mode from the specified logical PHY address
+ to a specific VPI/VCI address.
+ @li 1 - Enable statistics for specified VPI/VCI address.
+ @li 0 - Disable statistics for specified VPI/VCI address */
+
+ unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC
+ field of the ATM header when ATM VPI/VCI statistics are enabled.
+ GFC is only available at the UNI and uses the first 4-bits of
+ the VPI field.
+ @li 1 - GFC field is valid
+ @li 0 - GFC field ignored.*/
+
+ unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI
+ field of the ATM header when ATM VPI/VCI statistics are enabled.
+ @li 1 - PTI field is valid
+ @li 0 - PTI field ignored.*/
+
+ unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP
+ field of the ATM header when ATM VPI/VCI statistics are enabled.
+ @li 1 - CLP field is valid
+ @li 0 - CLP field ignored. */
+
+ unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */
+
+ unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition
+ where there is a change in polling status.
+ @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status
+ @li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available
+ */
+ unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition
+ assertion.
+ @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition.
+ @li 0 - No CBI Transmit Status condition assertion */
+
+ unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition
+ @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition
+ @li 0 - No CBI Transmit Status condition assertion..*/
+
+ unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count.
+ @li 1 - Enable count of Idle cells transmitted.
+ @li 0 - No count is maintained. */
+
+ unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells
+ @li 1 - Enable count of valid cells transmitted- non-idle/non-error
+ @li 0 - No count is maintained.*/
+
+ unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */
+ } utTxEnableFields; /**< Tx enable Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable0_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable0_
+ {
+
+ unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */
+
+ unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */
+
+ unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */
+
+ unsigned int reserved_1:1; /**< [16] These bits are always 0.*/
+
+ unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */
+
+ unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */
+
+ unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utTxTransTable0; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable1_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable1_
+ {
+
+ unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */
+
+ unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */
+
+ unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */
+
+ unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */
+
+ unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utTxTransTable1; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable2_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable2_
+ {
+
+ unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */
+
+ unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */
+
+ unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */
+
+ unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */
+
+ unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utTxTransTable2; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable3_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable3_
+ {
+
+ unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */
+
+ unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */
+
+ unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */
+
+ unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */
+
+ unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utTxTransTable3; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable4_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable4_
+ {
+
+ unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */
+
+ unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */
+
+ unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */
+
+ unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */
+
+ unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utTxTransTable4; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxTransTable5_
+ * @brief Utopia Tx translation table Register
+ */
+ struct UtTxTransTable5_
+ {
+
+ unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */
+
+ unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */
+
+ } utTxTransTable5; /**< Tx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxConfig_
+ * @brief Utopia Rx config Register
+ */
+ struct UtRxConfig_
+ {
+
+ unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used
+ to set the Utopia Receive interface as ATM master or PHY slave:
+ @li 1 - PHY
+ @li 0 - ATM */
+
+ unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set
+ the Utopia Receive mode to SPHY or MPHY:
+ @li 1 - SPHY
+ @li 0 - MPHY */
+
+ unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia
+ cell transfer protocol to Octet-level handshaking. Note this is only
+ applicable in SPHY mode.
+ @li 1 - Octet-handshaking enabled
+ @li 0 - Cell-handshaking enabled */
+
+ unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable.
+ @li 1 - Parity checking enabled
+ @li 0 - Parity checking disabled */
+
+ unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode
+ @li 1 - Check for Even Parity
+ @li 0 - Check for Odd Parity.*/
+
+ unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header
+ error checking on the received cell header.
+ @li 1 - HEC checking enabled
+ @li 0 - HEC checking disabled */
+
+ unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
+ before being tested with the received HEC.
+ @li 1 - Enable HEC ExOR with value 0x55.
+ @li 0 - Use generated HEC value.*/
+
+ unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred
+ after optional processing to the NPE2 Coprocessor Bus Interface or
+ if it should be discarded.
+ @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2.
+ @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/
+
+ unsigned int reserved_1:1; /**< [23] These bits are always 0 */
+
+ unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size.
+ Values between 52-64 are valid */
+
+ unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be
+ included in the Hash data input or if the bits should be padded
+ with 1'b0.
+ @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
+ @li 0 - VPI [11:8]/GFC field padded with 1'b0 */
+
+ unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
+ incoming cell data should be pre-hashed to allow VPI/VCI header look-up
+ in a hash table.
+ @li 1 - Pre-hashing enabled
+ @li 0 - Pre-hashing disabled */
+
+ unsigned int reserved_2:1; /**< [13] These bits are always 0 */
+
+ unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode,
+ * this register specifies the upper
+ * limit of the PHY polling logical range. The number of active PHYs are
+ * RxAddrRange + 1.
+ */
+ unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/
+ unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register
+ * specifies the physical address of the PHY.
+ */
+ } utRxConfig; /**< Rx config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxStatsConfig_
+ * @brief Utopia Rx stats config Register
+ */
+ struct UtRxStatsConfig_
+ {
+
+ unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0]
+ @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */
+
+ unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */
+
+ unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1]
+ @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test.
+ @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
+ for statistics gathering.. */
+
+ unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0]
+ @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test.
+ @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
+ for statistics gathering.. */
+ } utRxStatsConfig; /**< Rx stats config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxDefineIdle_
+ * @brief Utopia Rx idle cells config Register
+ */
+ struct UtRxDefineIdle_
+ {
+
+ unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
+ @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */
+
+ unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */
+
+ unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0]
+ @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/
+
+ unsigned int clp:1; /**< [0] ATM CLP [0]
+ @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/
+ } utRxDefineIdle; /**< Rx idle cell config Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxEnableFields_
+ * @brief Utopia Rx enable Register
+ */
+ struct UtRxEnableFields_
+ {
+
+ unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC
+ field of the ATM header when testing for Idle cells.
+ @li 1 - GFC field is valid.
+ @li 0 - GFC field ignored.*/
+
+ unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI
+ field of the ATM header when testing for Idle cells.
+ @li 1 - PTI field is valid.
+ @li 0 - PTI field ignored.*/
+
+ unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP
+ field of the ATM header when testing for Idle cells.
+ @li 1 - CLP field is valid.
+ @li 0 - CLP field ignored.*/
+
+ unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics
+ gathering based on the specified PHY address as defined in RxStatsConfig
+ register.
+ @li 1 - Enable statistics for specified receive PHY address.
+ @li 0 - Disable statistics for specified receive PHY address.*/
+
+ unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics
+ gathering based on a specific VPI/VCI address.
+ @li 1 - Enable statistics for specified VPI/VCI address.
+ @li 0 - Disable statistics for specified VPI/VCI address.*/
+
+ unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field
+ of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only
+ available at the UNI and uses the first 4-bits of the VPI field.
+ @li 1 - GFC field is valid.
+ @li 0 - GFC field ignored. */
+
+ unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field
+ of the ATM header when ATM VPI/VCI statistics are enabled.
+ @li 1 - PTI field is valid.
+ @li 0 - PTI field ignored.*/
+
+ unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field
+ of the ATM header when ATM VPI/VCI statistics are enabled.
+ @li 1 - CLP field is valid.
+ @li 0 - CLP field ignored. */
+
+ unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC.
+ @li 1 - Discard cells with HEC errors
+ @li 0 - Cells with HEC errors are passed */
+
+ unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors.
+ @li 1 - Discard cells with parity errors
+ @li 0 - Cells with parity errors are passed */
+
+ unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values
+ @li 1 - Discard IDLE cells
+ @li 0 - IDLE cells passed */
+
+ unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count.
+ @li 1 - Enable count of received cells containing HEC errors
+ @li 0 - No count is maintained. */
+
+ unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count
+ @li 1 - Enable count of received cells containing Parity errors
+ @li 0 - No count is maintained. */
+
+ unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count.
+ @li 1 - Enable count of Idle cells received.
+ @li 0 - No count is maintained.*/
+
+ unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count.
+ @li 1 - Enable count of received cells of incorrect size
+ @li 0 - No count is maintained. */
+
+ unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells.
+ @li 1 - Enable count of valid cells received - non-idle/non-error
+ @li 0 - No count is maintained. */
+
+ unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */
+
+ unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount
+ register overflows.
+ @li 1 - CBI Receive Status asserted.
+ @li 0 - No CBI Receive Status asserted.*/
+
+ unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount
+ register overflows.
+ @li 1 - CBI Receive Condition asserted.
+ @li 0 - No CBI Receive Condition asserted */
+
+ unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount
+ register overflows
+ @li 1 - CBI Receive Condition asserted.
+ @li 0 - No CBI Receive Condition asserted */
+
+ unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
+ register overflows.
+ @li 1 - CBI Receive Status Condition asserted.
+ @li 0 - No CBI Receive Status asserted */
+
+ unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
+ @li 1 - CBI Receive Condition asserted.
+ @li 0 - No CBI Receive Condition asserted */
+
+ unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */
+
+ unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase
+ the PHY receive address range. The register should be programmed with
+ the address-range limit, i.e. if set to 0x3 the address range increases
+ to a maximum of 4 addresses. */
+ } utRxEnableFields; /**< Rx enable Utopia register */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable0_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable0_
+ {
+
+ unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */
+
+ unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */
+
+ unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */
+
+ unsigned int reserved_1:1; /**< [16] These bits are always 0 */
+
+ unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */
+
+ unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */
+
+ unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ }
+
+ utRxTransTable0; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable1_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable1_
+ {
+
+ unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */
+
+ unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */
+
+ unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */
+
+ unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */
+
+ unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ }
+
+ utRxTransTable1; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable2_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable2_
+ {
+
+ unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */
+
+ unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */
+
+ unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */
+
+ unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */
+
+ unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utRxTransTable2; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable3_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable3_
+ {
+
+ unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */
+
+ unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */
+
+ unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */
+
+ unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */
+
+ unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utRxTransTable3; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable4_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable4_
+ {
+
+ unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */
+
+ unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */
+
+ unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */
+
+ unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
+
+ unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */
+
+ unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */
+
+ unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */
+
+ unsigned int reserved_2:1; /**< [0] These bits are always 0 */
+ } utRxTransTable4; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxTransTable5_
+ * @brief Utopia Rx translation table Register
+ */
+ struct UtRxTransTable5_
+ {
+
+ unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */
+
+ unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */
+
+ } utRxTransTable5; /**< Rx translation table */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtSysConfig_
+ * @brief NPE setup Register
+ */
+ struct UtSysConfig_
+ {
+
+ unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */
+ unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM
+ * @li 1 - FSM enabled
+ * @li 0 - FSM inactive
+ */
+ unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM
+ * @li 1 - FSM enabled
+ * @li 0 - FSM inactive
+ */
+ unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an
+ * inactive state. Note that this bit is set on reset and must be
+ * de-asserted
+ * @li 0 - Normal data transfer
+ * @li 1 - Utopia interface pins are forced inactive
+ */
+ unsigned int tstLoop:1; /**< [26] Test Loop Back Enable.
+ * @li Note: For loop back to function RxMode and Tx Mode must both be set
+ * to single PHY mode.
+ * @li 0 - Loop back
+ * @li 1 - Normal operating mode
+ */
+
+ unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
+ * @li Note: All transmit configuration and status registers will be reset
+ * to their reset values.
+ * @li 0 - Normal operating mode
+ * @li 1 - Reset transmit modules
+ */
+
+ unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state.
+ * @li Note: All receive configuration and status registers will be reset
+ * to their reset values.
+ * @li 0 - Normal operating mode
+ * @li 1 - Reset receive modules
+ */
+
+ unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */
+ } utSysConfig; /**< NPE debug config */
+
+}
+IxAtmdAccUtopiaConfig;
+
+/**
+*
+* @brief Utopia status
+*
+* This structure is used to set/get the Utopia status parameters
+* @li contains debug cell counters, to be accessed during a read operation
+*
+* @note - the exact description of all parameters is done in the Utopia reference
+* documents.
+*
+*/
+typedef struct
+{
+
+ unsigned int utTxCellCount; /**< count of cells transmitted */
+
+ unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtTxCellConditionStatus_
+ * @brief Utopia Tx Status Register
+ */
+ struct UtTxCellConditionStatus_
+ {
+
+ unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */
+ unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte
+ * Transmit FIFO2 indicates a FIFO underflow
+ * error condition.
+ */
+ unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if
+ * 64-byte Transmit FIFO1 indicates a FIFO
+ * underflow error condition.
+ */
+ unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte
+ * Transmit FIFO2 indicates a FIFO overflow
+ * error condition.
+ */
+ unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte
+ * Transmit FIFO1 indicates a FIFO overflow
+ * error condition.
+ */
+ unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the
+ * TxIdleCellCount register overflows.
+ */
+ unsigned int txCellCountOvr:1; /**< [24] This bit is set if the
+ * TxCellCount register overflows
+ */
+ unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */
+ } utTxCellConditionStatus; /**< Tx cells condition status */
+
+ unsigned int utRxCellCount; /**< count of cell received */
+ unsigned int utRxIdleCellCount; /**< count of idle cell received */
+ unsigned int utRxInvalidHECount; /**< count of invalid cell
+ * received because of HEC errors
+ */
+ unsigned int utRxInvalidParCount; /**< count of invalid cell received
+ * because of parity errors
+ */
+ unsigned int utRxInvalidSizeCount; /**< count of invalid cell
+ * received because of cell
+ * size errors
+ */
+
+ /**
+ * @ingroup IxAtmdAccUtopiaCtrlAPI
+ * @struct UtRxCellConditionStatus_
+ * @brief Utopia Rx Status Register
+ */
+ struct UtRxCellConditionStatus_
+ {
+
+ unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/
+ unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */
+ unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/
+ unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/
+ unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/
+ unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/
+ unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */
+ unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2
+ * indicates a FIFO underflow error condition.
+ */
+ unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive
+ * FIFO1 indicates a FIFO underflow error condition
+ . */
+ unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2
+ * indicates a FIFO overflow error condition.
+ */
+ unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1
+ * indicates a FIFO overflow error condition.
+ */
+ unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */
+ } utRxCellConditionStatus; /**< Rx cells condition status */
+
+} IxAtmdAccUtopiaStatus;
+
+/**
+ * @} defgroup IxAtmdAccUtopiaCtrlAPI
+ */
+
+ /**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
+ ixAtmdAccUtopiaConfigPtr)
+ *
+ * @brief Send the configuration structure to the Utopia interface
+ *
+ * This function downloads the @a IxAtmdAccUtopiaConfig structure to
+ * the Utopia and has the following effects
+ * @li setup the Utopia interface
+ * @li initialise the NPE
+ * @li reset the Utopia cell counters and status registers to known values
+ *
+ * This action has to be done once at initialisation. A lock is preventing
+ * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and
+ * @A ixAtmdAccUtopiaConfigSet()
+ *
+ * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to
+ * Utopia. This parameter cannot be a null pointer.
+ *
+ * @return @li IX_SUCCESS successful download
+ * @return @li IX_FAIL error in the parameters, or configuration is not
+ * complete or failed
+ *
+ * @sa ixAtmdAccUtopiaStatusGet
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
+ ixAtmdAccUtopiaConfigPtr);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
+ ixAtmdAccUtopiaStatus)
+ *
+ * @brief Get the Utopia interface configuration.
+ *
+ * This function reads the Utopia registers and the Cell counts
+ * and fills the @a IxAtmdAccUtopiaStatus structure
+ *
+ * A lock is preventing the concurrent
+ * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet()
+ *
+ * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal
+ * hardware counters. This parameter cannot be a NULL pointer.
+ *
+ * @return @li IX_SUCCESS successful read
+ * @return @li IX_FAIL error in the parameters null pointer, or
+ * configuration read is not complete or failed
+ *
+ * @sa ixAtmdAccUtopiaConfigSet
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
+ ixAtmdAccUtopiaStatus);
+
+/**
+ *
+ * @ingroup IxAtmdAcc
+ *
+ * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port)
+ *
+ * @brief enable a PHY logical port
+ *
+ * This function enables the transmission over one port. It should be
+ * called before accessing any resource from this port and before the
+ * establishment of a VC.
+ *
+ * When a port is enabled, the cell transmission to the Utopia interface
+ * is started. If there is no traffic already running, idle cells are
+ * sent over the interface.
+ *
+ * This function can be called multiple times.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ *
+ * @return @li IX_SUCCESS enable is complete
+ * @return @li IX_ATMDACC_WARNING port already enabled
+ * @return @li IX_FAIL enable failed, wrong parameter, or cannot
+ * initialise this port (the port is maybe already in use,
+ * or there is a hardware issue)
+ *
+ * @note - This function needs internal locks and should not be
+ * called from an interrupt context
+ *
+ * @sa ixAtmdAccPortDisable
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port);
+
+/**
+ *
+ * @ingroup IxAtmdAccCtrlAPI
+ *
+ * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port)
+ *
+ * @brief disable a PHY logical port
+ *
+ * This function disable the transmission over one port.
+ *
+ * When a port is disabled, the cell transmission to the Utopia interface
+ * is stopped.
+ *
+ * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+ *
+ * @return @li IX_SUCCESS disable is complete
+ * @return @li IX_ATMDACC_WARNING port already disabled
+ * @return @li IX_FAIL disable failed, wrong parameter .
+ *
+ * @note - This function needs internal locks and should not be called
+ * from an interrupt context
+ *
+ * @note - The response from hardware is done through the txDone mechanism
+ * to ensure the synchrnisation with tx resources. Therefore, the
+ * txDone mechanism needs to be serviced to make a PortDisable complete.
+ *
+ * @sa ixAtmdAccPortEnable
+ * @sa ixAtmdAccPortDisableComplete
+ * @sa ixAtmdAccTxDoneDispatch
+ *
+ */
+PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port);
+
+/**
+*
+* @ingroup IxAtmdAccCtrlAPI
+*
+* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port)
+*
+* @brief disable a PHY logical port
+*
+* This function indicates if the port disable for a port has completed. This
+* function will return TRUE if the port has never been enabled.
+*
+* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
+*
+* @return @li TRUE disable is complete
+* @return @li FALSE disable failed, wrong parameter .
+*
+* @note - This function needs internal locks and should not be called
+* from an interrupt context
+*
+* @sa ixAtmdAccPortEnable
+* @sa ixAtmdAccPortDisable
+*
+*/
+PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port);
+
+#endif /* IXATMDACCCTRL_H */
+
+/**
+ * @} defgroup IxAtmdAccCtrlAPI
+ */
+
+