diff options
Diffstat (limited to 'drivers/net/e1000.c')
| -rw-r--r-- | drivers/net/e1000.c | 173 |
1 files changed, 171 insertions, 2 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 875682b1b89..1d9f8f3ae2e 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -150,6 +150,7 @@ static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #ifndef CONFIG_E1000_NO_NVM static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); @@ -861,6 +862,174 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, return E1000_SUCCESS; } +#ifndef CONFIG_DM_ETH +/****************************************************************************** + * e1000_write_eeprom_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If e1000_update_eeprom_checksum_i210 is not called after this function, the + * Shadow Ram will most likely contain an invalid checksum. + *****************************************************************************/ +static int32_t e1000_write_eeprom_srwr(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data) +{ + struct e1000_eeprom_info *eeprom = &hw->eeprom; + uint32_t i, k, eewr = 0; + uint32_t attempts = 100000; + int32_t ret_val = 0; + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= eeprom->word_size) || + (words > (eeprom->word_size - offset)) || (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << E1000_EEPROM_RW_ADDR_SHIFT) + | (data[i] << E1000_EEPROM_RW_REG_DATA) | + E1000_EEPROM_RW_REG_START; + + E1000_WRITE_REG(hw, I210_EEWR, eewr); + + for (k = 0; k < attempts; k++) { + if (E1000_EEPROM_RW_REG_DONE & + E1000_READ_REG(hw, I210_EEWR)) { + ret_val = 0; + break; + } + udelay(5); + } + + if (ret_val) { + DEBUGOUT("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/****************************************************************************** + * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + *****************************************************************************/ +static int32_t e1000_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + int32_t ret_val = -E1000_ERR_EEPROM; + uint32_t i, reg; + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = E1000_READ_REG(hw, EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = 0; + break; + } + udelay(5); + } + + return ret_val; +} + +/****************************************************************************** + * e1000_update_flash_i210 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + * + *****************************************************************************/ +static int32_t e1000_update_flash_i210(struct e1000_hw *hw) +{ + int32_t ret_val = 0; + uint32_t flup; + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == -E1000_ERR_EEPROM) { + DEBUGOUT("Flash update time out\n"); + goto out; + } + + flup = E1000_READ_REG(hw, EECD) | E1000_EECD_FLUPD_I210; + E1000_WRITE_REG(hw, EECD, flup); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val) + DEBUGOUT("Flash update time out\n"); + else + DEBUGOUT("Flash update complete\n"); + +out: + return ret_val; +} + +/****************************************************************************** + * e1000_update_eeprom_checksum_i210 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + *****************************************************************************/ +static int32_t e1000_update_eeprom_checksum_i210(struct e1000_hw *hw) +{ + int32_t ret_val = 0; + uint16_t checksum = 0; + uint16_t i, nvm_data; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = e1000_read_eeprom_eerd(hw, 0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("EEPROM read failed\n"); + goto out; + } + + if (!(e1000_get_hw_eeprom_semaphore(hw))) { + /* Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { + ret_val = e1000_read_eeprom_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("EEPROM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (uint16_t)EEPROM_SUM - checksum; + ret_val = e1000_write_eeprom_srwr(hw, EEPROM_CHECKSUM_REG, 1, + &checksum); + if (ret_val) { + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("EEPROM Write Error while updating checksum.\n"); + goto out; + } + + e1000_put_hw_eeprom_semaphore(hw); + + ret_val = e1000_update_flash_i210(hw); + } else { + ret_val = -E1000_ERR_SWFW_SYNC; + } + +out: + return ret_val; +} +#endif + /****************************************************************************** * Verifies that the EEPROM has a valid checksum * @@ -970,7 +1139,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC(); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan && hw->mac_type != e1000_igb) return E1000_SUCCESS; while (timeout) { @@ -1044,7 +1213,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) if (!hw->eeprom_semaphore_present) return E1000_SUCCESS; - if (hw->mac_type == e1000_80003es2lan) { + if (hw->mac_type == e1000_80003es2lan || hw->mac_type == e1000_igb) { /* Get the SW semaphore. */ if (e1000_get_software_semaphore(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; |