diff options
Diffstat (limited to 'drivers/mmc/tegra_mmc.c')
-rw-r--r-- | drivers/mmc/tegra_mmc.c | 84 |
1 files changed, 76 insertions, 8 deletions
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index f022e935525..73ac58c6c8d 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -3,7 +3,7 @@ * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2016 NVIDIA Corporation + * Portions Copyright 2011-2019 NVIDIA Corporation */ #include <bouncebuf.h> @@ -15,6 +15,9 @@ #include <asm/io.h> #include <asm/arch-tegra/tegra_mmc.h> #include <linux/err.h> +#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210) +#include <asm/arch/clock.h> +#endif struct tegra_mmc_plat { struct mmc_config cfg; @@ -30,6 +33,7 @@ struct tegra_mmc_priv { struct gpio_desc wp_gpio; /* Write Protect GPIO */ unsigned int version; /* SDHCI spec. version */ unsigned int clock; /* Current clock (MHz) */ + int mmc_id; /* peripheral id */ }; static void tegra_mmc_set_power(struct tegra_mmc_priv *priv, @@ -446,16 +450,19 @@ static int tegra_mmc_set_ios(struct udevice *dev) static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv) { -#if defined(CONFIG_TEGRA30) +#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210) u32 val; + u16 clk_con; + int timeout; + int id = priv->mmc_id; - debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)priv->reg); + debug("%s: sdmmc address = %p, id = %d\n", __func__, + priv->reg, id); /* Set the pad drive strength for SDMMC1 or 3 only */ - if (priv->reg != (void *)0x78000000 && - priv->reg != (void *)0x78000400) { + if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) { debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", - __func__); + __func__); return; } @@ -464,11 +471,65 @@ static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv) val |= MEMCOMP_PADCTRL_VREF; writel(val, &priv->reg->sdmemcmppadctl); + /* Disable SD Clock Enable before running auto-cal as per TRM */ + clk_con = readw(&priv->reg->clkcon); + debug("%s: CLOCK_CONTROL = 0x%04X\n", __func__, clk_con); + clk_con &= ~TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE; + writew(clk_con, &priv->reg->clkcon); + val = readl(&priv->reg->autocalcfg); val &= 0xFFFF0000; - val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; + val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET; writel(val, &priv->reg->autocalcfg); -#endif + val |= AUTO_CAL_START | AUTO_CAL_ENABLE; + writel(val, &priv->reg->autocalcfg); + debug("%s: AUTO_CAL_CFG = 0x%08X\n", __func__, val); + udelay(1); + timeout = 100; /* 10 mSec max (100*100uS) */ + do { + val = readl(&priv->reg->autocalsts); + udelay(100); + } while ((val & AUTO_CAL_ACTIVE) && --timeout); + val = readl(&priv->reg->autocalsts); + debug("%s: Final AUTO_CAL_STATUS = 0x%08X, timeout = %d\n", + __func__, val, timeout); + + /* Re-enable SD Clock Enable when auto-cal is done */ + clk_con |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE; + writew(clk_con, &priv->reg->clkcon); + clk_con = readw(&priv->reg->clkcon); + debug("%s: final CLOCK_CONTROL = 0x%04X\n", __func__, clk_con); + + if (timeout == 0) { + printf("%s: Warning: Autocal timed out!\n", __func__); + /* TBD: Set CFG2TMC_SDMMC1_PAD_CAL_DRV* regs here */ + } + +#if defined(CONFIG_TEGRA210) + u32 tap_value, trim_value; + + /* Set tap/trim values for SDMMC1/3 @ <48MHz here */ + val = readl(&priv->reg->venspictl); /* aka VENDOR_SYS_SW_CNTL */ + val &= IO_TRIM_BYPASS_MASK; + if (id == PERIPH_ID_SDMMC1) { + tap_value = 4; /* default */ + if (val) + tap_value = 3; + trim_value = 2; + } else { /* SDMMC3 */ + tap_value = 3; + trim_value = 3; + } + + val = readl(&priv->reg->venclkctl); + val &= ~TRIM_VAL_MASK; + val |= (trim_value << TRIM_VAL_SHIFT); + val &= ~TAP_VAL_MASK; + val |= (tap_value << TAP_VAL_SHIFT); + writel(val, &priv->reg->venclkctl); + debug("%s: VENDOR_CLOCK_CNTRL = 0x%08X\n", __func__, val); +#endif /* T210 */ +#endif /* T30/T210 */ } static void tegra_mmc_reset(struct tegra_mmc_priv *priv, struct mmc *mmc) @@ -514,6 +575,13 @@ static int tegra_mmc_init(struct udevice *dev) unsigned int mask; debug(" tegra_mmc_init called\n"); +#if defined(CONFIG_TEGRA210) + priv->mmc_id = clock_decode_periph_id(dev); + if (priv->mmc_id == PERIPH_ID_NONE) { + printf("%s: Missing/invalid peripheral ID\n", __func__); + return -EINVAL; + } +#endif tegra_mmc_reset(priv, mmc); #if defined(CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK) |