diff options
Diffstat (limited to 'drivers/mmc/owl_mmc.c')
-rw-r--r-- | drivers/mmc/owl_mmc.c | 408 |
1 files changed, 408 insertions, 0 deletions
diff --git a/drivers/mmc/owl_mmc.c b/drivers/mmc/owl_mmc.c new file mode 100644 index 00000000000..e84171a661a --- /dev/null +++ b/drivers/mmc/owl_mmc.c @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amit Singh Tomar <amittomer25@gmail.com> + * + * Driver for SD/MMC controller present on Actions Semi S700/S900 SoC, based + * on Linux Driver "drivers/mmc/host/owl-mmc.c". + * + * Though, there is a bit (BSEL, BUS or DMA Special Channel Selection) that + * controls the data transfer from SDx_DAT register either using CPU AHB Bus + * or DMA channel, but seems like, it only works correctly using external DMA + * channel, and those special bits used in this driver is picked from vendor + * source exclusively for MMC/SD. + */ +#include <common.h> +#include <clk.h> +#include <cpu_func.h> +#include <dm.h> +#include <errno.h> +#include <log.h> +#include <mmc.h> +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iopoll.h> + +/* + * SDC registers + */ +#define OWL_REG_SD_EN 0x0000 +#define OWL_REG_SD_CTL 0x0004 +#define OWL_REG_SD_STATE 0x0008 +#define OWL_REG_SD_CMD 0x000c +#define OWL_REG_SD_ARG 0x0010 +#define OWL_REG_SD_RSPBUF0 0x0014 +#define OWL_REG_SD_RSPBUF1 0x0018 +#define OWL_REG_SD_RSPBUF2 0x001c +#define OWL_REG_SD_RSPBUF3 0x0020 +#define OWL_REG_SD_RSPBUF4 0x0024 +#define OWL_REG_SD_DAT 0x0028 +#define OWL_REG_SD_BLK_SIZE 0x002c +#define OWL_REG_SD_BLK_NUM 0x0030 +#define OWL_REG_SD_BUF_SIZE 0x0034 + +/* SD_EN Bits */ +#define OWL_SD_EN_RANE BIT(31) +#define OWL_SD_EN_RESE BIT(10) +#define OWL_SD_ENABLE BIT(7) +#define OWL_SD_EN_BSEL BIT(6) +#define OWL_SD_EN_DATAWID(x) (((x) & 0x3) << 0) +#define OWL_SD_EN_DATAWID_MASK 0x03 + +/* SD_CTL Bits */ +#define OWL_SD_CTL_TOUTEN BIT(31) +#define OWL_SD_CTL_DELAY_MSK GENMASK(23, 16) +#define OWL_SD_CTL_RDELAY(x) (((x) & 0xf) << 20) +#define OWL_SD_CTL_WDELAY(x) (((x) & 0xf) << 16) +#define OWL_SD_CTL_TS BIT(7) +#define OWL_SD_CTL_LBE BIT(6) +#define OWL_SD_CTL_TM(x) (((x) & 0xf) << 0) + +#define OWL_SD_DELAY_LOW_CLK 0x0f +#define OWL_SD_DELAY_MID_CLK 0x0a +#define OWL_SD_RDELAY_HIGH 0x08 +#define OWL_SD_WDELAY_HIGH 0x09 + +/* SD_STATE Bits */ +#define OWL_SD_STATE_DAT0S BIT(7) +#define OWL_SD_STATE_CLNR BIT(4) +#define OWL_SD_STATE_CRC7ER BIT(0) + +#define OWL_MMC_OCR (MMC_VDD_32_33 | MMC_VDD_33_34 | \ + MMC_VDD_165_195) + +#define DATA_TRANSFER_TIMEOUT 3000000 +#define DMA_TRANSFER_TIMEOUT 5000000 + +/* + * Simple DMA transfer operations defines for MMC/SD card + */ +#define SD_DMA_CHANNEL(base, channel) ((base) + 0x100 + 0x100 * (channel)) + +#define DMA_MODE 0x0000 +#define DMA_SOURCE 0x0004 +#define DMA_DESTINATION 0x0008 +#define DMA_FRAME_LEN 0x000C +#define DMA_FRAME_CNT 0x0010 +#define DMA_START 0x0024 + +/* DMAx_MODE */ +#define DMA_MODE_ST(x) (((x) & 0x3) << 8) +#define DMA_MODE_ST_DEV DMA_MODE_ST(0) +#define DMA_MODE_DT(x) (((x) & 0x3) << 10) +#define DMA_MODE_DT_DCU DMA_MODE_DT(2) +#define DMA_MODE_SAM(x) (((x) & 0x3) << 16) +#define DMA_MODE_SAM_CONST DMA_MODE_SAM(0) +#define DMA_MODE_DAM(x) (((x) & 0x3) << 18) +#define DMA_MODE_DAM_INC DMA_MODE_DAM(1) + +#define DMA_ENABLE 0x1 + +struct owl_mmc_plat { + struct mmc_config cfg; + struct mmc mmc; +}; + +struct owl_mmc_priv { + void *reg_base; + void *dma_channel; + struct clk clk; + unsigned int clock; /* Current clock */ + unsigned int dma_drq; /* Trigger Source */ +}; + +static void owl_dma_config(struct owl_mmc_priv *priv, unsigned int src, + unsigned int dst, unsigned int len) +{ + unsigned int mode = priv->dma_drq; + + /* Set Source and Destination adderess mode */ + mode |= (DMA_MODE_ST_DEV | DMA_MODE_SAM_CONST | DMA_MODE_DT_DCU | + DMA_MODE_DAM_INC); + + writel(mode, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_MODE); + writel(src, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_SOURCE); + writel(dst, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_DESTINATION); + writel(len, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_FRAME_LEN); + writel(0x1, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_FRAME_CNT); +} + +static void owl_mmc_prepare_data(struct owl_mmc_priv *priv, + struct mmc_data *data) +{ + unsigned int total; + u32 buf = 0; + + setbits_le32(priv->reg_base + OWL_REG_SD_EN, OWL_SD_EN_BSEL); + + writel(data->blocks, priv->reg_base + OWL_REG_SD_BLK_NUM); + writel(data->blocksize, priv->reg_base + OWL_REG_SD_BLK_SIZE); + total = data->blocksize * data->blocks; + + if (total < 512) + writel(total, priv->reg_base + OWL_REG_SD_BUF_SIZE); + else + writel(512, priv->reg_base + OWL_REG_SD_BUF_SIZE); + + /* DMA STOP */ + writel(0x0, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_START); + + if (data) { + if (data->flags == MMC_DATA_READ) { + buf = (ulong) (data->dest); + owl_dma_config(priv, (ulong) priv->reg_base + + OWL_REG_SD_DAT, buf, total); + invalidate_dcache_range(buf, buf + total); + } else { + buf = (ulong) (data->src); + owl_dma_config(priv, buf, (ulong) priv->reg_base + + OWL_REG_SD_DAT, total); + flush_dcache_range(buf, buf + total); + } + /* DMA START */ + writel(0x1, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_START); + } +} + +static int owl_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct owl_mmc_priv *priv = dev_get_priv(dev); + unsigned int cmd_rsp_mask, mode, reg; + int ret; + + setbits_le32(priv->reg_base + OWL_REG_SD_EN, OWL_SD_ENABLE); + + /* setup response */ + mode = 0; + if (cmd->resp_type != MMC_RSP_NONE) + cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER; + if (cmd->resp_type == MMC_RSP_R1) { + if (data) { + if (data->flags == MMC_DATA_READ) + mode |= OWL_SD_CTL_TM(4); + else + mode |= OWL_SD_CTL_TM(5); + } else + mode |= OWL_SD_CTL_TM(1); + } else if (cmd->resp_type == MMC_RSP_R2) { + mode = OWL_SD_CTL_TM(2); + } else if (cmd->resp_type == MMC_RSP_R1b) { + mode = OWL_SD_CTL_TM(3); + } else if (cmd->resp_type == MMC_RSP_R3) { + cmd_rsp_mask = OWL_SD_STATE_CLNR; + mode = OWL_SD_CTL_TM(1); + } + + mode |= (readl(priv->reg_base + OWL_REG_SD_CTL) & (0xff << 16)); + + /* setup command */ + writel(cmd->cmdidx, priv->reg_base + OWL_REG_SD_CMD); + writel(cmd->cmdarg, priv->reg_base + OWL_REG_SD_ARG); + + /* Set LBE to send clk at the end of last read block */ + if (data) + mode |= (OWL_SD_CTL_TS | OWL_SD_CTL_LBE | 0xE4000000); + else + mode |= OWL_SD_CTL_TS; + + if (data) + owl_mmc_prepare_data(priv, data); + + /* Start transfer */ + writel(mode, priv->reg_base + OWL_REG_SD_CTL); + + ret = readl_poll_timeout(priv->reg_base + OWL_REG_SD_CTL, reg, + !(reg & OWL_SD_CTL_TS), DATA_TRANSFER_TIMEOUT); + + if (ret == -ETIMEDOUT) { + debug("error: transferred data timeout\n"); + return ret; + } + + reg = readl(priv->reg_base + OWL_REG_SD_STATE) & cmd_rsp_mask; + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (reg & OWL_SD_STATE_CLNR) { + printf("Error CMD_NO_RSP\n"); + return -1; + } + + if (reg & OWL_SD_STATE_CRC7ER) { + printf("Error CMD_RSP_CRC\n"); + return -1; + } + + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[3] = readl(priv->reg_base + OWL_REG_SD_RSPBUF0); + cmd->response[2] = readl(priv->reg_base + OWL_REG_SD_RSPBUF1); + cmd->response[1] = readl(priv->reg_base + OWL_REG_SD_RSPBUF2); + cmd->response[0] = readl(priv->reg_base + OWL_REG_SD_RSPBUF3); + } else { + u32 rsp[2]; + + rsp[0] = readl(priv->reg_base + OWL_REG_SD_RSPBUF0); + rsp[1] = readl(priv->reg_base + OWL_REG_SD_RSPBUF1); + cmd->response[0] = rsp[1] << 24 | rsp[0] >> 8; + cmd->response[1] = rsp[1] >> 8; + } + } + + if (data) { + ret = readl_poll_timeout(SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_START, + reg, !(reg & DMA_ENABLE), DMA_TRANSFER_TIMEOUT); + + if (ret == -ETIMEDOUT) { + debug("error: DMA transfer timeout\n"); + return ret; + } + + /* DMA STOP */ + writel(0x0, SD_DMA_CHANNEL(priv->dma_channel, 0) + DMA_START); + /* Transmission STOP */ + while (readl(priv->reg_base + OWL_REG_SD_CTL) & OWL_SD_CTL_TS) + clrbits_le32(priv->reg_base + OWL_REG_SD_CTL, + OWL_SD_CTL_TS); + } + + return 0; +} + +static int owl_mmc_clk_set(struct owl_mmc_priv *priv, int rate) +{ + u32 reg, wdelay, rdelay; + + reg = readl(priv->reg_base + OWL_REG_SD_CTL); + reg &= ~OWL_SD_CTL_DELAY_MSK; + + /* Set RDELAY and WDELAY based on the clock */ + if (rate <= 1000000) + rdelay = wdelay = OWL_SD_DELAY_LOW_CLK; + else if ((rate > 1000000) && (rate <= 26000000)) + rdelay = wdelay = OWL_SD_DELAY_MID_CLK; + else if ((rate > 26000000) && (rate <= 52000000)) { + rdelay = OWL_SD_RDELAY_HIGH; + wdelay = OWL_SD_WDELAY_HIGH; + } else { + debug("SD clock rate not supported\n"); + return -EINVAL; + } + + writel(reg | OWL_SD_CTL_RDELAY(rdelay) | OWL_SD_CTL_WDELAY(wdelay), + priv->reg_base + OWL_REG_SD_CTL); + + return 0; +} + +static int owl_mmc_set_ios(struct udevice *dev) +{ + struct owl_mmc_priv *priv = dev_get_priv(dev); + struct owl_mmc_plat *plat = dev_get_plat(dev); + struct mmc *mmc = &plat->mmc; + u32 reg, ret; + + if (mmc->clock != priv->clock) { + priv->clock = mmc->clock; + ret = owl_mmc_clk_set(priv, mmc->clock); + if (IS_ERR_VALUE(ret)) + return ret; + + ret = clk_set_rate(&priv->clk, mmc->clock); + if (IS_ERR_VALUE(ret)) + return ret; + } + + if (mmc->clk_disable) + ret = clk_disable(&priv->clk); + else + ret = clk_enable(&priv->clk); + if (ret) + return ret; + + /* Set the Bus width */ + reg = readl(priv->reg_base + OWL_REG_SD_EN); + reg &= ~OWL_SD_EN_DATAWID_MASK; + if (mmc->bus_width == 8) + reg |= OWL_SD_EN_DATAWID(2); + else if (mmc->bus_width == 4) + reg |= OWL_SD_EN_DATAWID(1); + + writel(reg, priv->reg_base + OWL_REG_SD_EN); + + return 0; +} + +static const struct dm_mmc_ops owl_mmc_ops = { + .send_cmd = owl_mmc_send_cmd, + .set_ios = owl_mmc_set_ios, +}; + +static int owl_mmc_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct owl_mmc_plat *plat = dev_get_plat(dev); + struct owl_mmc_priv *priv = dev_get_priv(dev); + struct mmc_config *cfg = &plat->cfg; + struct ofnode_phandle_args args; + int ret; + fdt_addr_t addr; + + cfg->name = dev->name; + cfg->voltages = OWL_MMC_OCR; + cfg->f_min = 400000; + cfg->f_max = 52000000; + cfg->b_max = 512; + cfg->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz; + + ret = mmc_of_parse(dev, cfg); + if (ret) + return ret; + + addr = dev_read_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->reg_base = (void *)addr; + + ret = dev_read_phandle_with_args(dev, "dmas", "#dma-cells", 0, 0, + &args); + if (ret) + return ret; + + priv->dma_channel = (void *)ofnode_get_addr(args.node); + priv->dma_drq = args.args[0]; + + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) { + debug("clk_get_by_index() failed: %d\n", ret); + return ret; + } + + upriv->mmc = &plat->mmc; + + return 0; +} + +static int owl_mmc_bind(struct udevice *dev) +{ + struct owl_mmc_plat *plat = dev_get_plat(dev); + + return mmc_bind(dev, &plat->mmc, &plat->cfg); +} + +static const struct udevice_id owl_mmc_ids[] = { + { .compatible = "actions,s700-mmc" }, + { .compatible = "actions,owl-mmc" }, + { } +}; + +U_BOOT_DRIVER(owl_mmc_drv) = { + .name = "owl_mmc", + .id = UCLASS_MMC, + .of_match = owl_mmc_ids, + .bind = owl_mmc_bind, + .probe = owl_mmc_probe, + .ops = &owl_mmc_ops, + .plat_auto = sizeof(struct owl_mmc_plat), + .priv_auto = sizeof(struct owl_mmc_priv), +}; |