summaryrefslogtreecommitdiff
path: root/drivers/i2c/tsi108_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/tsi108_i2c.c')
-rw-r--r--drivers/i2c/tsi108_i2c.c20
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e393417e..fda822c52d3 100644
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
chan_offset = TSI108_I2C_SDRAM_OFFSET;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
I2C_CNTRL2_START))) {
/* Set device address and operation (read = 0) */
temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
temp;
/* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
* (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
(I2C_CNTRL2_START);
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
) {
op_status = TSI108_I2C_SUCCESS;
- temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
chan_offset +
I2C_RD_DATA);
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
u32 op_status = TSI108_I2C_TIMEOUT_ERR;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
/* Place data into the I2C Tx Register */
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_TX_DATA) = (u32) * buffer;
/* Set device address and operation */
temp =
I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL1) = temp;
/* Issue the write command (at this moment all other parameters
* are 0 (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL2) = (I2C_CNTRL2_START);
op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &