diff options
Diffstat (limited to 'drivers/block/sym53c8xx.c')
| -rw-r--r-- | drivers/block/sym53c8xx.c | 793 |
1 files changed, 793 insertions, 0 deletions
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c new file mode 100644 index 00000000000..29eeccd9a8f --- /dev/null +++ b/drivers/block/sym53c8xx.c @@ -0,0 +1,793 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * partly derived from + * linux/drivers/scsi/sym53c8xx.c + * + */ + +/* + * SCSI support based on the chip sym53C810. + * + * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de> + * The local version of this driver for the BAB750 board does not + * use interrupts but polls the chip instead (see the call of + * 'handle_scsi_int()' in 'scsi_issue()'. + */ + +#include <common.h> + +#ifdef CONFIG_SCSI_SYM53C8XX + +#include <command.h> +#include <pci.h> +#include <asm/processor.h> +#include <sym53c8xx.h> +#include <scsi.h> + +#undef SYM53C8XX_DEBUG + +#ifdef SYM53C8XX_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) + +#undef SCSI_SINGLE_STEP +/* + * Single Step is only used for debug purposes + */ +#ifdef SCSI_SINGLE_STEP +static unsigned long start_script_select; +static unsigned long start_script_msgout; +static unsigned long start_script_msgin; +static unsigned long start_script_msg_ext; +static unsigned long start_script_cmd; +static unsigned long start_script_data_in; +static unsigned long start_script_data_out; +static unsigned long start_script_status; +static unsigned long start_script_complete; +static unsigned long start_script_error; +static unsigned long start_script_reselection; +static unsigned int len_script_select; +static unsigned int len_script_msgout; +static unsigned int len_script_msgin; +static unsigned int len_script_msg_ext; +static unsigned int len_script_cmd; +static unsigned int len_script_data_in; +static unsigned int len_script_data_out; +static unsigned int len_script_status; +static unsigned int len_script_complete; +static unsigned int len_script_error; +static unsigned int len_script_reselection; +#endif + + +static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */ +static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */ +static unsigned long script_select[8]; /* script for selection */ +static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */ +static unsigned long script_msgin[14]; /* script for message in phase */ +static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */ +static unsigned long script_cmd[18]; /* script for command phase */ +static unsigned long script_data_in[8]; /* script for data in phase */ +static unsigned long script_data_out[8]; /* script for data out phase */ +static unsigned long script_status[6]; /* script for status phase */ +static unsigned long script_complete[10]; /* script for complete */ +static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */ +static unsigned long script_error[2]; /* script for error handling */ + +static unsigned long int_stat[3]; /* interrupt status */ +static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */ + +#define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a)) +#define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a)) + +#define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */ + +#define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */ +#define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */ + +/********************************************************************************* + * forward declerations + */ + +void scsi_chip_init(void); +void handle_scsi_int(void); + + +/******************************************************************************** + * reports SCSI errors to the user + */ +void scsi_print_error(ccb *pccb) +{ + int i; + printf("SCSI Error: Target %d LUN %d Command %02X\n",pccb->target, pccb->lun, pccb->cmd[0]); + printf(" CCB: "); + for(i=0;i<pccb->cmdlen;i++) + printf("%02X ",pccb->cmd[i]); + printf("(len=%d)\n",pccb->cmdlen); + printf(" Cntrl: "); + switch(pccb->contr_stat) { + case SIR_COMPLETE: printf("Complete (no Error)\n"); break; + case SIR_SEL_ATN_NO_MSG_OUT: printf("Selected with ATN no MSG out phase\n"); break; + case SIR_CMD_OUT_ILL_PH: printf("Command out illegal phase\n"); break; + case SIR_MSG_RECEIVED: printf("MSG received Error\n"); break; + case SIR_DATA_IN_ERR: printf("Data in Error\n"); break; + case SIR_DATA_OUT_ERR: printf("Data out Error\n"); break; + case SIR_SCRIPT_ERROR: printf("Script Error\n"); break; + case SIR_MSG_OUT_NO_CMD: printf("MSG out no Command phase\n"); break; + case SIR_MSG_OVER7: printf("MSG in over 7 bytes\n"); break; + case INT_ON_FY: printf("Interrupt on fly\n"); break; + case SCSI_SEL_TIME_OUT: printf("SCSI Selection Timeout\n"); break; + case SCSI_HNS_TIME_OUT: printf("SCSI Handshake Timeout\n"); break; + case SCSI_MA_TIME_OUT: printf("SCSI Phase Error\n"); break; + case SCSI_UNEXP_DIS: printf("SCSI unexpected disconnect\n"); break; + default: printf("unknown status %lx\n",pccb->contr_stat); break; + } + printf(" Sense: SK %x (",pccb->sense_buf[2]&0x0f); + switch(pccb->sense_buf[2]&0xf) { + case SENSE_NO_SENSE: printf("No Sense)"); break; + case SENSE_RECOVERED_ERROR: printf("Recovered Error)"); break; + case SENSE_NOT_READY: printf("Not Ready)"); break; + case SENSE_MEDIUM_ERROR: printf("Medium Error)"); break; + case SENSE_HARDWARE_ERROR: printf("Hardware Error)"); break; + case SENSE_ILLEGAL_REQUEST: printf("Illegal request)"); break; + case SENSE_UNIT_ATTENTION: printf("Unit Attention)"); break; + case SENSE_DATA_PROTECT: printf("Data Protect)"); break; + case SENSE_BLANK_CHECK: printf("Blank check)"); break; + case SENSE_VENDOR_SPECIFIC: printf("Vendor specific)"); break; + case SENSE_COPY_ABORTED: printf("Copy aborted)"); break; + case SENSE_ABORTED_COMMAND: printf("Aborted Command)"); break; + case SENSE_VOLUME_OVERFLOW: printf("Volume overflow)"); break; + case SENSE_MISCOMPARE: printf("Misscompare\n"); break; + default: printf("Illegal Sensecode\n"); break; + } + printf(" ASC %x ASCQ %x\n",pccb->sense_buf[12],pccb->sense_buf[13]); + printf(" Status: "); + switch(pccb->status) { + case S_GOOD : printf("Good\n"); break; + case S_CHECK_COND: printf("Check condition\n"); break; + case S_COND_MET: printf("Condition Met\n"); break; + case S_BUSY: printf("Busy\n"); break; + case S_INT: printf("Intermediate\n"); break; + case S_INT_COND_MET: printf("Intermediate condition met\n"); break; + case S_CONFLICT: printf("Reservation conflict\n"); break; + case S_TERMINATED: printf("Command terminated\n"); break; + case S_QUEUE_FULL: printf("Task set full\n"); break; + default: printf("unknown: %02X\n",pccb->status); break; + } + +} + + +/****************************************************************************** + * sets-up the SCSI controller + * the base memory address is retrived via the pci_read_config_dword + */ +void scsi_low_level_init(int busdevfunc) +{ + unsigned int cmd; + unsigned int addr; + unsigned char vec; + + pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec); + pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr); + + addr = bus_to_phys(addr & ~0xf); + + /* + * Enable bus mastering in case this has not been done, yet. + */ + pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER; + pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd); + + scsi_mem_addr = addr; + + scsi_chip_init(); + scsi_bus_reset(); +} + + +/************************************************************************************ + * Low level Part of SCSI Driver + */ + +/* + * big-endian -> little endian conversion for the script + */ +unsigned long swap_script(unsigned long val) +{ + unsigned long tmp; + tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000); + return tmp; +} + + +void scsi_write_byte(ulong offset,unsigned char val) +{ + out8(scsi_mem_addr+offset,val); +} + + +unsigned char scsi_read_byte(ulong offset) +{ + return(in8(scsi_mem_addr+offset)); +} + + +/******************************************************************************** + * interrupt handler + */ +void handle_scsi_int(void) +{ + unsigned char stat,stat1,stat2; + unsigned short sstat; + int i; +#ifdef SCSI_SINGLE_STEP + unsigned long tt; +#endif + stat=scsi_read_byte(ISTAT); + if((stat & DIP)==DIP) { /* DMA Interrupt pending */ + stat1=scsi_read_byte(DSTAT); +#ifdef SCSI_SINGLE_STEP + if((stat1 & SSI)==SSI) + { + tt=in32r(scsi_mem_addr+DSP); + if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) { + printf("select %d\n",(tt-start_script_select)>>2); + goto end_single; + } + if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) { + printf("msgout %d\n",(tt-start_script_msgout)>>2); + goto end_single; + } + if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) { + printf("msgin %d\n",(tt-start_script_msgin)>>2); + goto end_single; + } + if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) { + printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2); + goto end_single; + } + if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) { + printf("cmd %d\n",(tt-start_script_cmd)>>2); + goto end_single; + } + if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) { + printf("data_in %d\n",(tt-start_script_data_in)>>2); + goto end_single; + } + if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) { + printf("data_out %d\n",(tt-start_script_data_out)>>2); + goto end_single; + } + if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) { + printf("status %d\n",(tt-start_script_status)>>2); + goto end_single; + } + if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) { + printf("complete %d\n",(tt-start_script_complete)>>2); + goto end_single; + } + if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) { + printf("error %d\n",(tt-start_script_error)>>2); + goto end_single; + } + if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) { + printf("reselection %d\n",(tt-start_script_reselection)>>2); + goto end_single; + } + printf("sc: %lx\n",tt); +end_single: + stat2=scsi_read_byte(DCNTL); + stat2|=STD; + scsi_write_byte(DCNTL,stat2); + } +#endif + if((stat1 & SIR)==SIR) /* script interrupt */ + { + int_stat[0]=in32(scsi_mem_addr+DSPS); + } + if((stat1 & DFE)==0) { /* fifo not epmty */ + scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ + stat2=scsi_read_byte(STEST3); + scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ + } + } + if((stat & SIP)==SIP) { /* scsi interrupt */ + sstat = (unsigned short)scsi_read_byte(SIST+1); + sstat <<=8; + sstat |= (unsigned short)scsi_read_byte(SIST); + for(i=0;i<3;i++) { + if(int_stat[i]==0) + break; /* found an empty int status */ + } + int_stat[i]=SCSI_INT_STATE | sstat; + stat1=scsi_read_byte(DSTAT); + if((stat1 & DFE)==0) { /* fifo not epmty */ + scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ + stat2=scsi_read_byte(STEST3); + scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ + } + } + if((stat & INTF)==INTF) { /* interrupt on Fly */ + scsi_write_byte(ISTAT,stat); /* clear it */ + for(i=0;i<3;i++) { + if(int_stat[i]==0) + break; /* found an empty int status */ + } + int_stat[i]=INT_ON_FY; + } +} + +void scsi_bus_reset(void) +{ + unsigned char t; + int i; + int end = CFG_SCSI_SPIN_UP_TIME*1000; + + t=scsi_read_byte(SCNTL1); + scsi_write_byte(SCNTL1,(t | CRST)); + udelay(50); + scsi_write_byte(SCNTL1,t); + + puts("waiting for devices to spin up"); + for(i=0;i<end;i++) { + udelay(1000); /* give the devices time to spin up */ + if (i % 1000 == 0) + putc('.'); + } + putc('\n'); + scsi_chip_init(); /* reinit the chip ...*/ + +} + +void scsi_int_enable(void) +{ + scsi_write_byte(SIEN,(unsigned char)scsi_int_mask); + scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8)); + scsi_write_byte(DIEN,script_int_mask); +} + +void scsi_write_dsp(unsigned long start) +{ + unsigned long val; +#ifdef SCSI_SINGLE_STEP + unsigned char t; +#endif + val = start; + out32r(scsi_mem_addr + DSP,start); +#ifdef SCSI_SINGLE_STEP + t=scsi_read_byte(DCNTL); + t|=STD; + scsi_write_byte(DCNTL,t); +#endif +} + +/* only used for debug purposes */ +void scsi_print_script(void) +{ + printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]); + printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]); + printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]); + printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]); + printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]); + printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]); + printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]); + printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]); + printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]); + printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]); +} + + +void scsi_set_script(ccb *pccb) +{ + int busdevfunc = pccb->priv; + int i; + i=0; + script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe)); + script_select[i++]=0; /* LED ON */ + script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */ + script_select[i++]=0; + /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */ + script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16); + script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */ + script_select[i++]=swap_script(SCR_JUMP); /* next section */ + /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */ + script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */ + +#ifdef SCSI_SINGLE_STEP + start_script_select=(unsigned long)&script_select[0]; + len_script_select=i*4; +#endif + + i=0; + script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT))); + script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT; + script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT); + script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0])); + script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */ + script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */ + script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */ + script_msgout[i++]=SIR_MSG_OUT_NO_CMD; + +#ifdef SCSI_SINGLE_STEP + start_script_msgout=(unsigned long)&script_msgout[0]; + len_script_msgout=i*4; +#endif + i=0; + script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND); + script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_status[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */ + script_cmd[i++]=SIR_CMD_OUT_ILL_PH; +#ifdef SCSI_SINGLE_STEP + start_script_cmd=(unsigned long)&script_cmd[0]; + len_script_cmd=i*4; +#endif + i=0; + script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */ + script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ + script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); + script_data_out[i++]=swap_script(phys_to_bus(&script_status[0])); + script_data_out[i++]=swap_script(SCR_INT); + script_data_out[i++]=SIR_DATA_OUT_ERR; + +#ifdef SCSI_SINGLE_STEP + start_script_data_out=(unsigned long)&script_data_out[0]; + len_script_data_out=i*4; +#endif + i=0; + script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */ + script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ + script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); + script_data_in[i++]=swap_script(phys_to_bus(&script_status[0])); + script_data_in[i++]=swap_script(SCR_INT); + script_data_in[i++]=SIR_DATA_IN_ERR; +#ifdef SCSI_SINGLE_STEP + start_script_data_in=(unsigned long)&script_data_in[0]; + len_script_data_in=i*4; +#endif + i=0; + script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); + script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED))); + script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0])); + script_msgin[i++]=swap_script(SCR_INT); + script_msgin[i++]=SIR_MSG_RECEIVED; +#ifdef SCSI_SINGLE_STEP + start_script_msgin=(unsigned long)&script_msgin[0]; + len_script_msgin=i*4; +#endif + i=0; + script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */ + script_msg_ext[i++]=0; + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_INT); + script_msg_ext[i++]=SIR_MSG_OVER7; +#ifdef SCSI_SINGLE_STEP + start_script_msg_ext=(unsigned long)&script_msg_ext[0]; + len_script_msg_ext=i*4; +#endif + i=0; + script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS); + script_status[i++]=swap_script(phys_to_bus(&pccb->status)); + script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); + script_status[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_status[i++]=swap_script(SCR_INT); + script_status[i++]=SIR_STATUS_ILL_PH; +#ifdef SCSI_SINGLE_STEP + start_script_status=(unsigned long)&script_status[0]; + len_script_status=i*4; +#endif + i=0; + script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f)); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN)); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_WAIT_DISC); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01)); + script_complete[i++]=0; /* LED OFF */ + script_complete[i++]=swap_script(SCR_INT); + script_complete[i++]=SIR_COMPLETE; +#ifdef SCSI_SINGLE_STEP + start_script_complete=(unsigned long)&script_complete[0]; + len_script_complete=i*4; +#endif + i=0; + script_error[i++]=swap_script(SCR_INT); /* interrupt if error */ + script_error[i++]=SIR_SCRIPT_ERROR; +#ifdef SCSI_SINGLE_STEP + start_script_error=(unsigned long)&script_error[0]; + len_script_error=i*4; +#endif + i=0; + script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */ + script_reselection[i++]=0; + script_reselection[i++]=swap_script(SCR_WAIT_RESEL); + script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */ +#ifdef SCSI_SINGLE_STEP + start_script_reselection=(unsigned long)&script_reselection[0]; + len_script_reselection=i*4; +#endif +} + + +void scsi_issue(ccb *pccb) +{ + int busdevfunc = pccb->priv; + int i; + unsigned short sstat; + int retrycnt; /* retry counter */ + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + /* struct pccb must be set-up correctly */ + retrycnt=0; + PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); + pccb->trans_bytes=0; /* no bytes transfered yet */ + scsi_set_script(pccb); /* fill in SCRIPT */ + scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ + script_int_mask=0xff; /* enable all Ints */ + scsi_int_enable(); + scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */ + /* now we have to wait for IRQs */ +retry: + /* + * This version of the driver is _not_ interrupt driven, + * but polls the chip's interrupt registers (ISTAT, DSTAT). + */ + while(int_stat[0]==0) + handle_scsi_int(); + + if(int_stat[0]==SIR_COMPLETE) { + if(pccb->msgin[0]==M_DISCONNECT) { + PRINTF("Wait for reselection\n"); + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */ + goto retry; + } + pccb->contr_stat=SIR_COMPLETE; + return; + } + if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */ + sstat=(unsigned short)int_stat[0]; + if((sstat & STO)==STO) { /* selection timeout */ + pccb->contr_stat=SCSI_SEL_TIME_OUT; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Selection Timeout\n",pccb->target); + return; + } + if((sstat & UDC)==UDC) { /* unexpected disconnect */ + pccb->contr_stat=SCSI_UNEXP_DIS; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); + return; + } + if((sstat & RSL)==RSL) { /* reselection */ + pccb->contr_stat=SCSI_UNEXP_DIS; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); + return; + } + if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */ + if(retrycnt<SCSI_MAX_RETRY) { + pccb->trans_bytes=pccb->datalen - + ((unsigned long)scsi_read_byte(DBC) | + ((unsigned long)scsi_read_byte(DBC+1)<<8) | + ((unsigned long)scsi_read_byte(DBC+2)<<16)); + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + retrycnt++; + PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", + pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); + scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ + goto retry; + } + if((sstat & MA)==MA) + pccb->contr_stat=SCSI_MA_TIME_OUT; + else + pccb->contr_stat=SCSI_HNS_TIME_OUT; + PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat); + return; + } /* no phase int */ +/* if((sstat & CMP)==CMP) { + pccb->contr_stat=SIR_COMPLETE; + return; + } +*/ + PRINTF("SCSI INT %lX\n",int_stat[0]); + pccb->contr_stat=int_stat[0]; + return; + } /* end scsi int */ + PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL)); + pccb->contr_stat=int_stat[0]; + return; +} + +int scsi_exec(ccb *pccb) +{ + unsigned char tmpcmd[16],tmpstat; + int i,retrycnt,t; + unsigned long transbytes,datalen; + unsigned char *tmpptr; + retrycnt=0; +retry: + scsi_issue(pccb); + if(pccb->contr_stat!=SIR_COMPLETE) + return FALSE; + if(pccb->status==S_GOOD) + return TRUE; + if(pccb->status==S_CHECK_COND) { /* check condition */ + for(i=0;i<16;i++) + tmpcmd[i]=pccb->cmd[i]; + pccb->cmd[0]=SCSI_REQ_SENSE; + pccb->cmd[1]=pccb->lun<<5; + pccb->cmd[2]=0; + pccb->cmd[3]=0; + pccb->cmd[4]=14; + pccb->cmd[5]=0; + pccb->cmdlen=6; + pccb->msgout[0]=SCSI_IDENTIFY; + transbytes=pccb->trans_bytes; + tmpptr=pccb->pdata; + pccb->pdata=&pccb->sense_buf[0]; + datalen=pccb->datalen; + pccb->datalen=14; + tmpstat=pccb->status; + scsi_issue(pccb); + for(i=0;i<16;i++) + pccb->cmd[i]=tmpcmd[i]; + pccb->trans_bytes=transbytes; + pccb->pdata=tmpptr; + pccb->datalen=datalen; + pccb->status=tmpstat; + PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f, + pccb->sense_buf[12],pccb->sense_buf[13]); + switch(pccb->sense_buf[2]&0xf) { + case SENSE_NO_SENSE: + case SENSE_RECOVERED_ERROR: + /* seems to be ok */ + return TRUE; + break; + case SENSE_NOT_READY: + if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { + /* if device is not in process of becoming ready */ + return FALSE; + break; + } /* else fall through */ + case SENSE_UNIT_ATTENTION: + if(retrycnt<SCSI_MAX_RETRY_NOT_READY) { + PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt); + for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++) + udelay(1000); /* 1sec wait */ + retrycnt++; + goto retry; + } + PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt); + return FALSE; + default: + return FALSE; + } + } + PRINTF("Status = %X\n",pccb->status); + return FALSE; +} + + +void scsi_chip_init(void) +{ + /* first we issue a soft reset */ + scsi_write_byte(ISTAT,SRST); + udelay(1000); + scsi_write_byte(ISTAT,0); + /* setup chip */ + scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */ + scsi_write_byte(SCNTL1,0x00); + scsi_write_byte(SCNTL2,0x00); +#ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */ + scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */ +#else + scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */ +#endif + scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */ + scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */ + scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */ + scsi_int_mask=0x0000; /* no Interrupt is enabled */ + script_int_mask=0x00; + scsi_int_enable(); + scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */ + scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */ + scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */ + scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */ + scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */ + scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */ + scsi_write_byte(STEST3,0x80); /* enable tolerANT */ + scsi_write_byte(CTEST3,0x04); /* clear FIFO */ + scsi_write_byte(CTEST4,0x00); + scsi_write_byte(CTEST5,0x00); +#ifdef SCSI_SINGLE_STEP +/* scsi_write_byte(DCNTL,IRQM | SSM); */ + scsi_write_byte(DCNTL,IRQD | SSM); + scsi_write_byte(DMODE,MAN); +#else +/* scsi_write_byte(DCNTL,IRQM); */ + scsi_write_byte(DCNTL,IRQD); + scsi_write_byte(DMODE,0x00); +#endif +} +#endif + + +#endif /* CONFIG_SCSI_SYM53C8XX */ |