diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.sh7752evb | 67 | ||||
-rw-r--r-- | doc/README.usb | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/exynos/isp-spi.txt | 22 | ||||
-rw-r--r-- | doc/device-tree-bindings/exynos/sound.txt | 27 |
4 files changed, 117 insertions, 1 deletions
diff --git a/doc/README.sh7752evb b/doc/README.sh7752evb new file mode 100644 index 0000000000..c1fb54cdcd --- /dev/null +++ b/doc/README.sh7752evb @@ -0,0 +1,67 @@ +======================================== +Renesas R0P7752C00000RZ board +======================================== + +This board specification: +========================= + +The R0P7752C00000RZ(board config name:sh7752evb) has the following device: + + - SH7752 (SH-4A) + - DDR3-SDRAM 512MB + - SPI ROM 8MB + - Gigabit Ethernet controllers + - eMMC 4GB + + +Configuration for This board: +============================= + +You can select the configuration as follows: + + - make sh7752evb_config + + +This board specific command: +============================ + +This board has the following its specific command: + + - write_mac + + +1. write_mac + +You can write MAC address to SPI ROM. + + Usage 1) Write MAC address + + write_mac [GETHERC ch0] [GETHERC ch1] + + For example) + => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f + *) We have to input the command as a single line + (without carriage return) + *) We have to reset after input the command. + + Usage 2) Show current data + + write_mac + + For example) + => write_mac + GETHERC ch0 = 74:90:50:00:33:9e + GETHERC ch1 = 74:90:50:00:33:9f + + +Update SPI ROM: +============================ + +1. Copy u-boot image to RAM area. +2. Probe SPI device. + => sf probe 0 + SF: Detected MX25L6405D with page size 64KiB, total 8 MiB +3. Erase SPI ROM. + => sf erase 0 80000 +4. Write u-boot image to SPI ROM. + => sf write 0x48000000 0 80000 diff --git a/doc/README.usb b/doc/README.usb index ef1d6ba366..b4c3ef5224 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -63,7 +63,7 @@ Common USB Commands: Storage USB Commands: - usb scan: scans the USB for storage devices.The USB must be running for this command (usb start) -- usb device [dev]: show or set current USB staorage device +- usb device [dev]: show or set current USB storage device - usb part [dev]: print partition table of one or all USB storage devices - usb read addr blk# cnt: diff --git a/doc/device-tree-bindings/exynos/isp-spi.txt b/doc/device-tree-bindings/exynos/isp-spi.txt new file mode 100644 index 0000000000..b8086e82b1 --- /dev/null +++ b/doc/device-tree-bindings/exynos/isp-spi.txt @@ -0,0 +1,22 @@ +Exynos ISP SPI Subsystem + +The device node for ISP SPI subsytem. +Since Peripheral id in EXYNOS is decoded based on Interrupts, currently +ISP SPI have no individual interrupts hence we add ad dummy interrupt node +which will have a value beyond the maximum number of interrupts exynos5 can +support. + +Required properties : + - compatible : Should be "samsung,exynos-spi" for spi. + - reg : Base adrress of the the subsystem. + - interrupts : A value which is beyond the maximum number of interrupts +exynos5 can support. + +Example: +spi@131a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x131a0000 0x30>; + interrupts = <0 129 0>; +}; diff --git a/doc/device-tree-bindings/exynos/sound.txt b/doc/device-tree-bindings/exynos/sound.txt new file mode 100644 index 0000000000..98d1798d0c --- /dev/null +++ b/doc/device-tree-bindings/exynos/sound.txt @@ -0,0 +1,27 @@ +Exynos Sound Subsystem + +The device node for sound subsytem which contains codec and i2s block +that is a part of Exynos5250 + +Required properties : + - compatible : Should be "samsung,exynos-sound" for sound + - samsung,i2s-epll-clock-frequency : epll clock output frequency in Hz + - samsung,i2s-sampling-rate : sampling rate, default is 48000 + - samsung,i2s-bits-per-sample : sample width, defalut is 16 bit + - samsung,i2s-channels : nummber of channels, default is 2 + - samsung,i2s-lr-clk-framesize : lr clock frame size + - samsung,i2s-bit-clk-framesize : bit clock frame size + - samsung,codec-type : sound codec type + +Example: + +sound@12d60000 { + compatible = "samsung,exynos-sound" + samsung,i2s-epll-clock-frequency = <192000000>; + samsung,i2s-sampling-rate = <48000>; + samsung,i2s-bits-per-sample = <16>; + samsung,i2s-channels = <2>; + samsung,i2s-lr-clk-framesize = <256>; + samsung,i2s-bit-clk-framesize = <32>; + samsung,codec-type = "wm8994"; +}; |