summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/I2C_Edge_Conditions41
1 files changed, 41 insertions, 0 deletions
diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
new file mode 100644
index 00000000000..91557a3ca97
--- /dev/null
+++ b/doc/I2C_Edge_Conditions
@@ -0,0 +1,41 @@
+I2C Edge Conditions:
+====================
+
+ I2C devices may be left in a write state if a read was occuring
+ and the CPU was reset. This may result in EEPROM data corruption.
+
+ The edge condition is as follows:
+ 1) A read operation begins.
+ 2) I2C controller issues a start command.
+ 3) The I2C writes the device address.
+ 4) The CPU is reset at this point.
+
+ Once the CPU reinitializes and the read is tried again:
+ 1) The I2C controller issues a start command.
+ 2) The I2C controller writes the device address.
+ 3) The I2C controller writes the offset.
+
+ The EEPROM sees:
+ 1) START
+ 2) device address
+ 3) START "this start is ignored by most EEPROMs"
+ 4) device address "EEPROM interprets this as offset"
+ 5) Offset in device, "EEPROM interprets this as data to write"
+
+ The device will interpret this sequence as a WRITE command and
+ write rubbish into itself, i.e. the "offset" will be interpreted
+ as data to be written in location "device address".
+
+Notes
+-----
+!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
+
+This reset edge condition could possibly be present in every I2C
+controller and device available. We should probably have a bus reset
+function for all our target CPUs.
+
+Many thanks to Bill Hunter for finding this serious BUG.
+email to: <williamhunter@attbi.com>
+
+Erik Theisen <etheisen@mindspring.com>
+Tue, 5 Mar 2002 23:02:19 -0500 (Wed 05:02 MET)