diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/i2c/i2c-cortina.txt | 18 | ||||
| -rw-r--r-- | doc/device-tree-bindings/i2c/octeon-i2c.txt | 24 | ||||
| -rw-r--r-- | doc/device-tree-bindings/pwm/pwm-sifive.txt | 31 |
3 files changed, 73 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/i2c/i2c-cortina.txt b/doc/device-tree-bindings/i2c/i2c-cortina.txt new file mode 100644 index 00000000000..59d523582a4 --- /dev/null +++ b/doc/device-tree-bindings/i2c/i2c-cortina.txt @@ -0,0 +1,18 @@ +* I2C for Cortina platforms + +Required properties : +- compatible : Must be "cortina,ca-i2c" +- reg : Offset and length of the register set for the device + +Recommended properties : +- clock-frequency : desired I2C bus clock frequency in Hz. If not specified, + default value is 100000. Possible values are 100000, + 400000 and 1000000. + +Examples : + + i2c: i2c@f4329120 { + compatible = "cortina,ca-i2c"; + reg = <0x0 0xf4329120 0x28>; + clock-frequency = <400000>; + }; diff --git a/doc/device-tree-bindings/i2c/octeon-i2c.txt b/doc/device-tree-bindings/i2c/octeon-i2c.txt new file mode 100644 index 00000000000..9c1908ec2cc --- /dev/null +++ b/doc/device-tree-bindings/i2c/octeon-i2c.txt @@ -0,0 +1,24 @@ +* I2C controller embedded in Marvell Octeon platforms + +Required properties : +- compatible : Must be "cavium,octeon-7890-twsi" or a compatible string +- reg : Offset and length of the register set for the device +- clocks: Must contain the input clock of the I2C instance +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal, Fast and Fast+ + modes are implemented, possible values are 100000, 400000 and 1000000. + +Example : + + i2c0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-7890-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + clock-frequency = <100000>; + clocks = <&sclk>; + }; diff --git a/doc/device-tree-bindings/pwm/pwm-sifive.txt b/doc/device-tree-bindings/pwm/pwm-sifive.txt new file mode 100644 index 00000000000..9a988372c44 --- /dev/null +++ b/doc/device-tree-bindings/pwm/pwm-sifive.txt @@ -0,0 +1,31 @@ +SiFive PWM controller + +Unlike most other PWM controllers, the SiFive PWM controller currently only +supports one period for all channels in the PWM. All PWMs need to run at +the same period. The period also has significant restrictions on the values +it can achieve, which the driver rounds to the nearest achievable period. +PWM RTL that corresponds to the IP block version numbers can be found +here: + +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm + +Required properties: +- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". + Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive + PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the + SiFive PWM v0 IP block with no chip integration tweaks. +- reg: physical base address and length of the controller's registers +- clocks: Should contain a clock identifier for the PWM's parent clock. +- #pwm-cells: Should be 3. +- interrupts: one interrupt per PWM channel + +Examples: + +pwm: pwm@10020000 { + compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; + reg = <0x0 0x10020000 0x0 0x1000>; + clocks = <&tlclk>; + interrupt-parent = <&plic>; + interrupts = <42 43 44 45>; + #pwm-cells = <3>; +}; |