diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.x86 | 16 | ||||
-rw-r--r-- | doc/device-tree-bindings/net/micrel-ksz90x1.txt | 27 |
2 files changed, 43 insertions, 0 deletions
diff --git a/doc/README.x86 b/doc/README.x86 index fa49cb8b8a..8e0a3f36ed 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -185,6 +185,22 @@ If you are using em100, then this command will flash write -Boot: em100 -s -d filename.rom -c W25Q64CV -r +Flash map for samus / broadwell: + + fffff800 SYS_X86_START16 + ffff0000 RESET_SEG_START + fffd8000 TPL_TEXT_BASE + fffa0000 X86_MRC_ADDR + fff90000 VGA_BIOS_ADDR + ffed0000 SYS_TEXT_BASE + ffea0000 X86_REFCODE_ADDR + ffe70000 SPL_TEXT_BASE + ffbf8000 CONFIG_ENV_OFFSET (environemnt offset) + ffbe0000 rw-mrc-cache (Memory-reference-code cache) + ffa00000 <spare> + ff801000 intel-me (address set by descriptor.bin) + ff800000 intel-descriptor + --- Intel Crown Bay specific instructions for bare mode: diff --git a/doc/device-tree-bindings/net/micrel-ksz90x1.txt b/doc/device-tree-bindings/net/micrel-ksz90x1.txt index 307f53f726..a214d35fc9 100644 --- a/doc/device-tree-bindings/net/micrel-ksz90x1.txt +++ b/doc/device-tree-bindings/net/micrel-ksz90x1.txt @@ -14,6 +14,33 @@ KSZ9021: value is 0, the maximum value is 1800, and it is incremented by 120ps steps. + The KSZ9021 hardware supports a range of skew values from negative to + positive, where the specific range is property dependent. All values + specified in the devicetree are offset by the minimum value so they + can be represented as positive integers in the devicetree since it's + difficult to represent a negative number in the devictree. + + The following 4-bit values table applies to all the skew properties: + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0000 -840ps 0 + 0001 -720ps 120 + 0010 -600ps 240 + 0011 -480ps 360 + 0100 -360ps 480 + 0101 -240ps 600 + 0110 -120ps 720 + 0111 0ps 840 + 1000 120ps 960 + 1001 240ps 1080 + 1010 360ps 1200 + 1011 480ps 1320 + 1100 600ps 1440 + 1101 720ps 1560 + 1110 840ps 1680 + 1111 960ps 1800 + Optional properties: - rxc-skew-ps : Skew control of RXC pad |