summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.cmi84
-rw-r--r--doc/README.mpc5xx48
2 files changed, 132 insertions, 0 deletions
diff --git a/doc/README.cmi b/doc/README.cmi
new file mode 100644
index 00000000000..48052b867ba
--- /dev/null
+++ b/doc/README.cmi
@@ -0,0 +1,84 @@
+
+Summary:
+========
+
+This file contains information about the cmi board configuration.
+Please see cmi_mpc5xx_config for further details. The cmi board is
+a customer specific board but should work with small modifications
+on every board which has a MPC5xx and either a 28F128J3A,
+28F320J3A or 28F640J3A Intel flash mounted.
+
+Board Discription:
+==================
+
+* Motorola MPC555
+* RS232 connection
+* Intel flash 28F640J3A
+* Micron SRAM 1M
+* Altera PLD
+
+Bootstrap:
+==========
+
+In contrast to the usual boot sequence used in U-Boot, on the
+cmi board we don't boot from the external flash directly.
+Because of we use a 16-bit flash and don't sample a RCW
+from the data bus to set the startup buswidth to 16-bit.
+Unfortunatly the default width, sampled from the default RCW
+is 32-bit. For this reason we burn the proper RCW into the
+internal flash shadow location and boot after power-on or
+reset from the internal flash and then branch to 0x02000100
+where the U-Boot reset vector handler is located.
+
+Memory Map:
+===========
+
+Memory Map after relocation:
+
+ 0x0000 0000 CFG_SDRAM_BASE
+ :
+ 0x000F 9FFF
+ :
+ :
+ 0x0100 0000 CFG_IMMR (Internal memory map base adress)
+ :
+ 0x0130 7FFF
+ :
+ :
+ 0x0200 0000 CFG_FLASH_BASE
+ :
+ 0x027C FFFF
+ :
+ :
+ 0x0300 0000 PLD_BASE
+
+Flash Partition:
+
+ 0x0200 0000 Block 0 and 1 contain U-Boot except
+ : environment
+ :
+ 0x0201 FFFF
+ 0x0202 0000 Block 2 contains environment (.ppcenv)
+ :
+ 0x0202 FFFF
+
+See README file for futher information about U-Boot relocation
+and partitioning.
+
+Tested Features:
+================
+
+* U-Boot commands: go, loads, loadb, all memory features, printenv,
+ setenv, saveenv, protect, erase, fli, bdi, mtest, reset, version,
+ coninfo, help (see configuration file for available commands)
+
+* Blinking led to indicate boot process
+
+Added or Changed Files:
+=======================
+
+u-boot-0.2.0/board/cmi/*
+u-boot-0.2.0/include/configs/cmi_mpc5xx.h
+
+Regards,
+Martin
diff --git a/doc/README.mpc5xx b/doc/README.mpc5xx
new file mode 100644
index 00000000000..2c1a29321ba
--- /dev/null
+++ b/doc/README.mpc5xx
@@ -0,0 +1,48 @@
+
+Summary:
+========
+
+This file contains information about the port of U-Boot to the
+Motorola mpc5xx series of CPUs. Most of this code is taken from
+existing code mainly from the mpc8xx port. In contrast to mpc8xx,
+the mpc5xx has no CPM, MMU and cache facilities.
+
+The implemented features have been tested on the cmi board, a
+customer specific board (see README.cmi).
+
+Hence this port is only tested on the cmi board further possible
+tests on other boards will be very valuable.
+
+Not Tested Features:
+====================
+
+* System calls
+* Interrupts
+
+Added or Changed Files:
+=======================
+
+u-boot-0.2.0/common/cmd_boot.c
+u-boot-0.2.0/common/cmd_reginfo.c
+u-boot-0.2.0/common/environment.c
+u-boot-0.2.0/cpu/mpc5xx/*
+u-boot-0.2.0/include/cmd_reginfo.h
+u-boot-0.2.0/include/common.h
+u-boot-0.2.0/include/ppc_asm.tmpl
+u-boot-0.2.0/include/watchdog.h
+u-boot-0.2.0/include/mpc5xx.h
+u-boot-0.2.0/include/status_led.h
+u-boot-0.2.0/include/asm-ppc/u-boot.h
+u-boot-0.2.0/include/asm-ppc/5xx_immap.h
+u-boot-0.2.0/lib_ppc/board.c
+u-boot-0.2.0/lib_ppc/cache.c
+u-boot-0.2.0/lib_ppc/time.c
+u-boot-0.2.0/Makefile
+u-boot-0.2.0/CREDITS
+u-boot-0.2.0/doc/README.mpc5xx
+u-boot-0.2.0/doc/README.cmi
+u-boot-0.2.0/README
+u-boot-0.2.0/MAKEALL
+
+Regards,
+Martin