diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.dk1c20_std32 | 365 | ||||
-rw-r--r-- | doc/README.dk1s10_std32 | 353 | ||||
-rw-r--r-- | doc/README.dk1s40_std32 | 355 | ||||
-rw-r--r-- | doc/README.dk20k200_std32 | 242 | ||||
-rw-r--r-- | doc/README.nios | 98 | ||||
-rw-r--r-- | doc/README.nios_CFG_NIOS_CPU | 140 | ||||
-rw-r--r-- | doc/README.nios_DK | 192 |
7 files changed, 1729 insertions, 16 deletions
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32 new file mode 100644 index 00000000000..4822c6fa705 --- /dev/null +++ b/doc/README.dk1c20_std32 @@ -0,0 +1,365 @@ + +TODO: specify IDE i/f + specify ASMI i/f + specify OCI + + +=============================================================================== + C P U , M E M O R Y , I N / O U T C O M P O N E N T S +=============================================================================== +see also [1]-[6] + +CPU: "standard_32" + 32 bit NIOS for 50 MHz + 256 Byte for register file (15 levels) + 4 KByte instruction cache (2 bytes in each cache line) + 4 KByte data cache (4 bytes in each cache line) + 2 KByte On Chip ROM with GERMS boot monitor + no On Chip RAM + MSTEP multiplier + no Debug Core + On Chip Instrumentation (OCI) enabled + + U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000 + CFG_NIOS_CPU_ICACHE = 4096 + CFG_NIOS_CPU_DCACHE = 4096 + CFG_NIOS_CPU_REG_NUMS = 256 + CFG_NIOS_CPU_MUL = 0 + CFG_NIOS_CPU_MSTEP = 1 + CFG_NIOS_CPU_DBG_CORE = 0 + +OCI: (TODO) + +IRQ: Nr. | used by + ------+-------------------------------------------------------- + 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16 + 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25 + 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30 + 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35 + 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40 + 45 | ASMI | CFG_NIOS_CPU_ASMI0_IRQ = 45 + 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50 + +MEMORY: 8 MByte Flash + 1 MByte SRAM + 16 MByte SDRAM + +ASMI: (TODO) <-- ASMI part is 4M bits + +Timer: TIMER0: high priority programmable timer (IRQ16) + TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) + + U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1 + CFG_NIOS_CPU_USER_TIMER = 0 + +PIO: Nr. | description + ------+-------------------------------------------------------- + PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) + PIO1 | LCD: 11 in/outputs for ASCII LCD + PIO2 | LED: 8 outputs for user LEDs + PIO3 | SEVENSEG: 16 outputs for user seven segment display + PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . + PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) + PIO6 | CFPOWER: 1 output to controll CF power supply + PIO7 | CFATASEL: 1 output to controll CF ATA card select + + U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0 + CFG_NIOS_CPU_LCD_PIO = 1 + CFG_NIOS_CPU_LED_PIO = 2 + CFG_NIOS_CPU_SEVENSEG_PIO = 3 + CFG_NIOS_CPU_RECONF_PIO = 4 + CFG_NIOS_CPU_CFPRESENT_PIO = 5 + CFG_NIOS_CPU_CFPOWER_PIO = 6 + CFG_NIOS_CPU_CFATASEL_PIO = 7 + +UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, + without handshake RTS/CTS (IRQ25) + +LAN: SMsC LAN91C111 with: + - offset 0x300 (LAN91C111_REGISTERS_OFFSET) + - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) + +IDE: (TODO) + + +=============================================================================== + M E M O R Y M A P +=============================================================================== + +- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - + + 0x02000000 ---32-----------16|15------------0- + | : | \ + | : | | + SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE + | : | | = 0x01000000 + | : | / + 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + | | + : gap : + : : + +- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - + + : : + : gap : + | | + 0x________ ---32-----------16|15------------0- + | | | \ + : (real size : : | + ASMI i/f : and content : : > 0x________ + [5] : unknown) : : | + | | | / + 0x00920b00 ---32-----------16|15------------0- CFG_NIOS_CPU_ASMI0 + | | + : gap : + | | + 0x00920a80 ---32-----------16|15------------0- + | | | \ + : (real size : : | + IDE i/f : and content : : > 0x00000080 + [6] : unknown) : : | + | | | / + 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER1 | (unused) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | (unused) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO7 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO6 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6 + | edgecapture (1 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO5 | interruptmask (1 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (ro) | / + 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO4 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (rw) | / + 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO3 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (16 bit) (wo) | / + 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO2 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (8 bit) (wo) | / + 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO1 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (11 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (11 bit) (rw) | / + 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1 + | edgecapture (4 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO0 | interruptmask (4 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (4 bit) (ro) | / + 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | snaph (16 bit) (rw) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER0 | snapl (16 bit) (rw) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | periodh (16 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | periodl (16 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (4 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0 + | | \ + : gap : > (space for UART1) + | | / + 0x00920920 ---32-----------16|15------------0- + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + UART0 | (unused) | > 0x00000020 + [2] + 0x10 |- - - - - - - - - - - - - - - -| | + | control (10 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | status (10 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | txdata (8 bit) (wo) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | rxdata (8 bit) (ro) | / + 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0 + +- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - + + 0x00920900 ----------------------------------- + | | \ + : (real size : | + OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE + : unknown) : | = 0x00000100 + | | / + 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE + +- - - - - - - - - - - on chip memory - - - - - - - - - - - + + 0x00920800 ---32-----------16|15------------0- + | : | \ + | : | | + GERMS | : | > CFG_NIOS_CPU_ROM_SIZE + | : | | = 0x00000800 + | : | / + 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT + 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE + +- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - + + 0x00920000 ---32-----------16|15------------0- + | gap | \ + 0x00910310 --+-------------------------------| | + | | | + | register bank (size = 0x10) | | + | +--------.---.---.--- | | + | | bank 0 \ 1 \ 2 \ 3 \ | | + | |---------------------------+ | | + LAN91C111 | | BANK | RESERVED | | | + | |- - - - - - -|- - - - - - -| | > na_lan91c111_size + | | RPCR | MIR | | | = 0x00010000 + | |- - - - - - -|- - - - - - -| | | + | | COUNTER | RCR | | | + | |- - - - - - -|- - - - - - -| | | + | | EPH STATUS | TCR | | | + | +---------------------------+ | | + 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | + | gap | / + 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE + | | + : gap : + : : + +- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - + + : : + : gap : + | | + 0x00900000 ---32-----------16|15------------0- + 0x00900000 --+32-----------16|15------------0+ + | : | \ \ + | : | | | + | : | | > CFG_NIOS_CPU_VEC_SIZE + | : | | | = 0x00000100 + | : | | / + 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE + 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_STACK + | : | | \ + | : | | | + | : | | > stack area + | : | | | + | : | | V + | : | | + SRAM | : | > CFG_NIOS_CPU_SRAM_SIZE + | : | | = 0x00100000 + | : | / + 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + 0x00800000 ---8-------------4|3-------------0- + | sector 127 | \ + + 0x7f0000 |- - - - - - - - - - - - - - - -| | + | : | | + Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE + | sector 1 : | | = 0x00800000 + + 0x010000 |- - - - - - - - - - - - - - - -| | + | sector 0 (size = 0x10000) | / + 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE + + +=============================================================================== + F L A S H M E M O R Y A L L O C A T I O N +=============================================================================== + + 0x00800000 ---8-------------4|3-------------0- + | : | \ + SAFE | : | > 1 MByte + FPGA conf. | : | / (NOT usable by software) + 0x00700000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + USER | : | > 1 MByte + FPGA conf. | : | / (NOT usable by software) + 0x00600000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + WEB pages | : | > 2 MByte + | : | | (provisory usable) + | : | / + 0x00400000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + | : | | + | : | > 4 MByte free for use + | : | | + 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() + | : | / + 0x00000000 ---8-------------4|3-------------0- + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf +[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf +[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf +[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf +[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf + http://www.altera.com/literature/wp/wp_epcs_cyc.pdf +[6] http://www.opencores.org/projects/ata/ + http://www.t13.org/index.html + + +=============================================================================== +Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32 new file mode 100644 index 00000000000..33ae15e6dd4 --- /dev/null +++ b/doc/README.dk1s10_std32 @@ -0,0 +1,353 @@ + +TODO: specify IDE i/f + specify OCI + + +=============================================================================== + C P U , M E M O R Y , I N / O U T C O M P O N E N T S +=============================================================================== +see also [1]-[5] + +CPU: "standard_32" + 32 bit NIOS for 50 MHz + 256 Byte for register file (15 levels) + 4 KByte instruction cache (4 bytes in each cache line) + 4 KByte data cache (4 bytes in each cache line) + 2 KByte On Chip ROM with GERMS boot monitor + 64 KByte On Chip RAM + MSTEP multiplier + no Debug Core + On Chip Instrumentation (OCI) enabled + + U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000 + CFG_NIOS_CPU_ICACHE = 4096 + CFG_NIOS_CPU_DCACHE = 4096 + CFG_NIOS_CPU_REG_NUMS = 256 + CFG_NIOS_CPU_MUL = 0 + CFG_NIOS_CPU_MSTEP = 1 + CFG_NIOS_CPU_DBG_CORE = 0 + +OCI: (TODO) + +IRQ: Nr. | used by + ------+-------------------------------------------------------- + 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16 + 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25 + 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30 + 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35 + 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40 + 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50 + +MEMORY: 8 MByte Flash + 1 MByte SRAM + 16 MByte SDRAM + +Timer: TIMER0: high priority programmable timer (IRQ16) + TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) + + U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1 + CFG_NIOS_CPU_USER_TIMER = 0 + +PIO: Nr. | description + ------+-------------------------------------------------------- + PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) + PIO1 | LCD: 11 in/outputs for ASCII LCD + PIO2 | LED: 8 outputs for user LEDs + PIO3 | SEVENSEG: 16 outputs for user seven segment display + PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . + PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) + PIO6 | CFPOWER: 1 output to controll CF power supply + PIO7 | CFATASEL: 1 output to controll CF ATA card select + + U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0 + CFG_NIOS_CPU_LCD_PIO = 1 + CFG_NIOS_CPU_LED_PIO = 2 + CFG_NIOS_CPU_SEVENSEG_PIO = 3 + CFG_NIOS_CPU_RECONF_PIO = 4 + CFG_NIOS_CPU_CFPRESENT_PIO = 5 + CFG_NIOS_CPU_CFPOWER_PIO = 6 + CFG_NIOS_CPU_CFATASEL_PIO = 7 + +UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, + without handshake RTS/CTS (IRQ25) + +LAN: SMsC LAN91C111 with: + - offset 0x300 (LAN91C111_REGISTERS_OFFSET) + - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) + +IDE: (TODO) + + +=============================================================================== + M E M O R Y M A P +=============================================================================== + +- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - + + 0x02000000 ---32-----------16|15------------0- + | : | \ + | : | | + SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE + | : | | = 0x01000000 + | : | / + 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + | | + : gap : + : : + +- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - + + : : + : gap : + | | + 0x00920a80 ---32-----------16|15------------0- + | | | \ + : (real size : : | + IDE i/f : and content : : > 0x00000080 + [5] : unknown) : : | + | | | / + 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER1 | (unused) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | (unused) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO7 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO6 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6 + | edgecapture (1 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO5 | interruptmask (1 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (ro) | / + 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO4 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (rw) | / + 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO3 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (16 bit) (wo) | / + 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO2 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (8 bit) (wo) | / + 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO1 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (11 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (11 bit) (rw) | / + 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1 + | edgecapture (4 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO0 | interruptmask (4 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (4 bit) (ro) | / + 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | snaph (16 bit) (rw) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER0 | snapl (16 bit) (rw) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | periodh (16 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | periodl (16 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (4 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0 + | | \ + : gap : > (space for UART1) + | | / + 0x00920920 ---32-----------16|15------------0- + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + UART0 | (unused) | > 0x00000020 + [2] + 0x10 |- - - - - - - - - - - - - - - -| | + | control (10 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | status (10 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | txdata (8 bit) (wo) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | rxdata (8 bit) (ro) | / + 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0 + +- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - + + 0x00920900 ----------------------------------- + | | \ + : (real size : | + OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE + : unknown) : | = 0x00000100 + | | / + 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE + +- - - - - - - - - - - on chip memory 2 - - - - - - - - - - - + + 0x00920800 ---32-----------16|15------------0- + | : | \ + | : | | + GERMS | : | > CFG_NIOS_CPU_ROM_SIZE + | : | | = 0x00000800 + | : | / + 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT + 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE + +- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - + + 0x00920000 ---32-----------16|15------------0- + | gap | \ + 0x00910310 --+-------------------------------| | + | | | + | register bank (size = 0x10) | | + | +--------.---.---.--- | | + | | bank 0 \ 1 \ 2 \ 3 \ | | + | |---------------------------+ | | + LAN91C111 | | BANK | RESERVED | | | + | |- - - - - - -|- - - - - - -| | > na_lan91c111_size + | | RPCR | MIR | | | = 0x00010000 + | |- - - - - - -|- - - - - - -| | | + | | COUNTER | RCR | | | + | |- - - - - - -|- - - - - - -| | | + | | EPH STATUS | TCR | | | + | +---------------------------+ | | + 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | + | gap | / + 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE + +- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - + + 0x00910000 ---32-----------16|15------------0- + | : | \ + | : | | + onchip RAM | : | > CFG_NIOS_CPU_RAM_SIZE + | : | | = 0x00010000 + | : | / + 0x00900000 ---32-----------16|15------------0- CFG_NIOS_CPU_RAM_BASE + +- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - + + 0x00900000 ---32-----------16|15------------0- + 0x00900000 --+32-----------16|15------------0+ + | . | \ \ + | . | | | + | . | | > CFG_NIOS_CPU_VEC_SIZE + | . | | | = 0x00000100 + | . | | / + 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE + 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK + | . | | \ + | . | | | + | . | | > stack area + | . | | | + | . | | V + | . | | + SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE + | . | | = 0x00100000 + | | / + 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + 0x00800000 ---8-------------4|3-------------0- + | sector 127 | \ + + 0x7f0000 |- - - - - - - - - - - - - - - -| | + | : | | + Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE + | sector 1 : | | = 0x00800000 + + 0x010000 |- - - - - - - - - - - - - - - -| | + | sector 0 (size = 0x10000) | / + 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE + + +=============================================================================== + F L A S H M E M O R Y A L L O C A T I O N +=============================================================================== + + 0x00800000 ---8-------------4|3-------------0- + | : | \ + SAFE | : | > 1 MByte + FPGA conf. | : | / (NOT usable by software) + 0x00700000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + USER | : | > 1 MByte + FPGA conf. | : | / (NOT usable by software) + 0x00600000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + WEB pages | : | > 2 MByte + | : | | (provisory usable) + | : | / + 0x00400000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + | : | | + | : | > 4 MByte free for use + | : | | + 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() + | : | / + 0x00000000 ---8-------------4|3-------------0- + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf +[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf +[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf +[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf +[5] http://www.opencores.org/projects/ata/ + http://www.t13.org/index.html + + +=============================================================================== +Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32 new file mode 100644 index 00000000000..08c8244450b --- /dev/null +++ b/doc/README.dk1s40_std32 @@ -0,0 +1,355 @@ + +TODO: specify IDE i/f + specify OCI + + +=============================================================================== + C P U , M E M O R Y , I N / O U T C O M P O N E N T S +=============================================================================== +see also [1]-[5] + +CPU: "standard_32" + 32 bit NIOS for 50 MHz + 256 Byte for register file (15 levels) + 4 KByte instruction cache (4 bytes in each cache line) + 4 KByte data cache (4 bytes in each cache line) + 2 KByte On Chip ROM with GERMS boot monitor + 64 KByte On Chip RAM + MSTEP multiplier + no Debug Core + On Chip Instrumentation (OCI) enabled + + U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000 + CFG_NIOS_CPU_ICACHE = 4096 + CFG_NIOS_CPU_DCACHE = 4096 + CFG_NIOS_CPU_REG_NUMS = 256 + CFG_NIOS_CPU_MUL = 0 + CFG_NIOS_CPU_MSTEP = 1 + CFG_NIOS_CPU_DBG_CORE = 0 + +OCI: (TODO) + +IRQ: Nr. | used by + ------+-------------------------------------------------------- + 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16 + 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25 + 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30 + 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35 + 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40 + 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50 + +MEMORY: 8 MByte Flash + 1 MByte SRAM + 16 MByte SDRAM + +Timer: TIMER0: high priority programmable timer (IRQ16) + TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) + + U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1 + CFG_NIOS_CPU_USER_TIMER = 0 + +PIO: Nr. | description + ------+-------------------------------------------------------- + PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) + PIO1 | LCD: 11 in/outputs for ASCII LCD + PIO2 | LED: 8 outputs for user LEDs + PIO3 | SEVENSEG: 16 outputs for user seven segment display + PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . + PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) + PIO6 | CFPOWER: 1 output to controll CF power supply + PIO7 | CFATASEL: 1 output to controll CF ATA card select + + U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0 + CFG_NIOS_CPU_LCD_PIO = 1 + CFG_NIOS_CPU_LED_PIO = 2 + CFG_NIOS_CPU_SEVENSEG_PIO = 3 + CFG_NIOS_CPU_RECONF_PIO = 4 + CFG_NIOS_CPU_CFPRESENT_PIO = 5 + CFG_NIOS_CPU_CFPOWER_PIO = 6 + CFG_NIOS_CPU_CFATASEL_PIO = 7 + +UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, + without handshake RTS/CTS (IRQ25) + +LAN: SMsC LAN91C111 with: + - offset 0x300 (LAN91C111_REGISTERS_OFFSET) + - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) + +IDE: (TODO) + + +=============================================================================== + M E M O R Y M A P +=============================================================================== + +- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - + + 0x02000000 ---32-----------16|15------------0- + | : | \ + | : | | + SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE + | : | | = 0x01000000 + | : | / + 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + | | + : gap : + : : + +- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - + + : : + : gap : + | | + 0x00920a80 ---32-----------16|15------------0- + | | | \ + : (real size : : | + IDE i/f : and content : : > 0x00000080 + [5] : unknown) : : | + | | | / + 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER1 | (unused) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | (unused) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO7 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO6 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (wo) | / + 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6 + | edgecapture (1 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO5 | interruptmask (1 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (ro) | / + 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO4 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (1 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (1 bit) (rw) | / + 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO3 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (16 bit) (wo) | / + 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO2 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (8 bit) (wo) | / + 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO1 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (11 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (11 bit) (rw) | / + 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1 + | edgecapture (4 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO0 | interruptmask (4 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (4 bit) (ro) | / + 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | snaph (16 bit) (rw) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER0 | snapl (16 bit) (rw) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | periodh (16 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | periodl (16 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (4 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0 + | | \ + : gap : > (space for UART1) + | | / + 0x00920920 ---32-----------16|15------------0- + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + UART0 | (unused) | > 0x00000020 + [2] + 0x10 |- - - - - - - - - - - - - - - -| | + | control (10 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | status (10 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | txdata (8 bit) (wo) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | rxdata (8 bit) (ro) | / + 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0 + +- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - + + 0x00920900 ----------------------------------- + | | \ + : (real size : | + OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE + : unknown) : | = 0x00000100 + | | / + 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE + +- - - - - - - - - - - on chip memory 2 - - - - - - - - - - - + + 0x00920800 ---32-----------16|15------------0- + | : | \ + | : | | + GERMS | : | > CFG_NIOS_CPU_ROM_SIZE + | : | | = 0x00000800 + | : | / + 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT + 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE + +- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - + + 0x00920000 ---32-----------16|15------------0- + | gap | \ + 0x00910310 --+-------------------------------| | + | | | + | register bank (size = 0x10) | | + | +--------.---.---.--- | | + | | bank 0 \ 1 \ 2 \ 3 \ | | + | |---------------------------+ | | + LAN91C111 | | BANK | RESERVED | | | + | |- - - - - - -|- - - - - - -| | > na_lan91c111_size + | | RPCR | MIR | | | = 0x00010000 + | |- - - - - - -|- - - - - - -| | | + | | COUNTER | RCR | | | + | |- - - - - - -|- - - - - - -| | | + | | EPH STATUS | TCR | | | + | +---------------------------+ | | + 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | + | gap | / + 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE + +- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - + + 0x00910000 ---32-----------16|15------------0- + | : | \ + | : | | + onchip RAM | : | > CFG_NIOS_CPU_RAM_SIZE + | : | | = 0x00010000 + | : | / + 0x00900000 ---32-----------16|15------------0- CFG_NIOS_CPU_RAM_BASE + +- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - + + 0x00900000 ---32-----------16|15------------0- + 0x00900000 --+32-----------16|15------------0+ + | . | \ \ + | . | | | + | . | | > CFG_NIOS_CPU_VEC_SIZE + | . | | | = 0x00000100 + | . | | / + 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE + 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK + | . | | \ + | . | | | + | . | | > stack area + | . | | | + | . | | V + | . | | + SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE + | . | | = 0x00100000 + | | / + 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + 0x00800000 ---8-------------4|3-------------0- + | sector 127 | \ + + 0x7f0000 |- - - - - - - - - - - - - - - -| | + | : | | + Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE + | sector 1 : | | = 0x00800000 + + 0x010000 |- - - - - - - - - - - - - - - -| | + | sector 0 (size = 0x10000) | / + 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE + + +=============================================================================== + F L A S H M E M O R Y A L L O C A T I O N +=============================================================================== + + 0x00800000 ---8-------------4|3-------------0- + | : | \ + | : | | + SAFE | : | > 2 MByte + FPGA conf. | : | | (NOT usable by software) + | : | / + 0x00600000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + USER | : | > 2 MByte + FPGA conf. | : | | (NOT usable by software) + | : | / + 0x00400000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + WEB pages | : | > 2 MByte + | : | | (provisory usable) + | : | / + 0x00200000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + | : | > 2 MByte free for use + 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() + | : | / + 0x00000000 ---8-------------4|3-------------0- + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf +[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf +[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf +[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf +[5] http://www.opencores.org/projects/ata/ + http://www.t13.org/index.html + + +=============================================================================== +Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32 new file mode 100644 index 00000000000..2c2b1d6b41e --- /dev/null +++ b/doc/README.dk20k200_std32 @@ -0,0 +1,242 @@ + +=============================================================================== + C P U , M E M O R Y , I N / O U T C O M P O N E N T S +=============================================================================== +see also [1]-[4] + +CPU: "standard_32" + 32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000) + 256 Byte for register file (15 levels) + no instruction cache + no data cache + 1 KByte On Chip ROM with GERMS boot monitor + no On Chip RAM + MSTEP multiplier + no Debug Core + no On Chip Instrumentation (OCI) enabled + + U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000 + CFG_NIOS_CPU_ICACHE = 0 + CFG_NIOS_CPU_DCACHE = 0 + CFG_NIOS_CPU_REG_NUMS = 256 + CFG_NIOS_CPU_MUL = 0 + CFG_NIOS_CPU_MSTEP = 1 + CFG_NIOS_CPU_DBG_CORE = 0 + +IRQ: Nr. | used by + ------+-------------------------------------------------------- + 25 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 25 + 26 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 26 + 27 | PIO2 | CFG_NIOS_CPU_PIO2_IRQ = 27 + 28 | UART1 | CFG_NIOS_CPU_UART1_IRQ = 28 (debug) + +MEMORY: 1 MByte Flash + 256 KByte SRAM + (SDRAM with standard SODIMM only) + +Timer: TIMER0: high priority programmable timer (IRQ25) + + U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 0 + +PIO: Nr. | description + ------+-------------------------------------------------------- + PIO0 | SEVENSEG: 16 outputs for user seven segment display + PIO1 | LED: 8 outputs for user LEDs + PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27) + PIO3 | LCD: 11 in/outputs for ASCII LCD + + U-Boot CFG: CFG_NIOS_CPU_SEVENSEG_PIO = 0 + CFG_NIOS_CPU_LED_PIO = 1 + CFG_NIOS_CPU_BUTTON_PIO = 2 + CFG_NIOS_CPU_LCD_PIO = 3 + +UART: UART0: fixed baudrate of 115200, fixed protocol 8N2, + without handshake RTS/CTS (IRQ26) + UART1: fixed baudrate of 115200, fixed protocol 8N1, + without handshake RTS/CTS (IRQ28) + + +=============================================================================== + M E M O R Y M A P +=============================================================================== + +- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - - + + 0x00200000 ---15------------8|7-------------0- + | sector 18 | \ + + 0x0f0000 |- - - - - - - - - - - - - - - -| | + | : | | + Flash |- - - - : - - - -| | + | sector 5 : | | + + 0x020000 |- - - - - - - - -| | + | sector 4 (size = 0x10000) | | + + 0x010000 |- - - - - - - - - - - - - - - -| > CFG_NIOS_CPU_FLASH_SIZE + | sector 3 (size = 0x08000) | | = 0x00100000 + + 0x008000 |- - - - - - - - - - - - - - - -| | + | sector 2 (size = 0x02000) | | + + 0x006000 |- - - - - - - - - - - - - - - -| | + | sector 1 (size = 0x02000) | | + + 0x004000 |- - - - - - - - - - - - - - - -| | + | sector 0 (size = 0x04000) | / + 0x00100000 ---15------------8|7-------------0- CFG_NIOS_CPU_FLASH_BASE + | | + : gap : + | | + 0x00080000 ---32-----------16|15------------0- + 0x00080000 --+32-----------16|15------------0+ + | . | \ \ + | . | | | + | . | | > CFG_NIOS_CPU_VEC_SIZE + | . | | | = 0x00000100 + | . | | / + 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE + 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK + | . | | \ + | . | | | + | . | | > stack area + | . | | | + | . | | V + | . | | + SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE + | . | | = 0x00040000 + | | / + 0x00040000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE + | | + : gap : + : : + +- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - + + : : + : gap : + | | + 0x00000400 ---32-----------16|15------------0- + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + UART0 | (unused) | > 0x00000020 + [2] + 0x10 |- - - - - - - - - - - - - - - -| | + | control (10 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | status (10 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | txdata (8 bit) (wo) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | rxdata (8 bit) (ro) | / + 0x000004c0 ---32-----------16|15------------0- CFG_NIOS_CPU_UART1 + | | + : gap : + | | + 0x00000490 ---32-----------16|15------------0- + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO3 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (11 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (11 bit) (rw) | / + 0x00000480 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3 + | edgecapture (12 bit) (rw) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO2 | interruptmask (12 bit) (rw) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (12 bit) (ro) | / + 0x00000470 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO1 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | direction (2 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (2 bit) (rw) | / + 0x00000460 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | snaph (16 bit) (rw) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + TIMER0 | snapl (16 bit) (rw) | | + [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 + | periodh (16 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | periodl (16 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | control (4 bit) (rw) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | status (2 bit) (rw) | / + 0x00000440 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0 + | (unused) | \ + + 0x0c |- - - - - - - - - - - - - - - -| | + PIO0 | (unused) | | + [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 + | (unused) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | data (16 bit) (wo) | / + 0x00000420 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0 + | (unused) | \ + + 0x1c |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x18 |- - - - - - - - - - - - - - - -| | + | (unused) | | + + 0x14 |- - - - - - - - - - - - - - - -| | + UART0 | (unused) | > 0x00000020 + [2] + 0x10 |- - - - - - - - - - - - - - - -| | + | control (10 bit) (rw) | | + + 0x0c |- - - - - - - - - - - - - - - -| | + | status (10 bit) (rw) | | + + 0x08 |- - - - - - - - - - - - - - - -| | + | txdata (8 bit) (wo) | | + + 0x04 |- - - - - - - - - - - - - - - -| | + | rxdata (8 bit) (ro) | / + 0x00000400 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0 + +- - - - - - - - - - - on chip memory - - - - - - - - - - - + + 0x00000400 ---32-----------16|15------------0- + | : | \ + | : | | + GERMS | : | > na_boot_monitor_rom_size + | : | | = 0x00000400 + | : | / + 0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address + 0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom + + +=============================================================================== + F L A S H M E M O R Y A L L O C A T I O N +=============================================================================== + + 0x00200000 ---15------------8|7-------------0- + | : | \ + SAFE | : | > 256 KByte + FPGA conf. | : | / (NOT usable by software) + 0x001c0000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + USER | : | > 256 KByte + FPGA conf. | : | / (NOT usable by software) + 0x00180000 --+- - - - - - - -:- - - - - - - -+- + | : | \ + | : | | + | : | > 512 KByte free for use + 0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() + | : | / + 0x00100000 ---15------------8|7-------------0- + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf +[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf +[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf +[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf + + +=============================================================================== +Stephan Linz <linz@li-pro.net> diff --git a/doc/README.nios b/doc/README.nios index aee0ecdc274..8765df73918 100644 --- a/doc/README.nios +++ b/doc/README.nios @@ -1,12 +1,27 @@ U-Boot for Nios-32 - Last Update: October 15, 2003 + Last Update: November 30, 2003 ==================================================================== This file contains information regarding U-Boot and the Altera Nios CPU. For information regarding U-Boot and the Nios Development -Kit, Cyclone Edition (DK-1C20), see doc/README.dk1c20. +Kits see: + + * Cyclone Edition (DK-1C20), see doc/README.dk1c20 + * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO) + * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO) + * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO) + +For informations regarding Nios Development Kit hardware overview +and the NIOS CPU standard configuration of all known boards made by +Altera see: + + * Development Kit (DK) hardware overview, see doc/README.nios_DK + * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32 + * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32 + * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32 + * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32 For those interested in contributing ... see HELP WANTED below. @@ -50,16 +65,25 @@ structure definitions from the Nios SDK. 2.1 Nios-specific Options/Settings ----------------------------------- All configuration options/settings that are specific to Nios begin -with "CONFIG_NIOS_" or "CFG_NIOS_". The following is a list of -currently defined Nios-specific options/parameters. If any options -are related to Standard-32 Nios SDK excalibur.h definitions, the -related definition follows the description). +with "CONFIG_NIOS_", "CFG_NIOS_", or "CFG_NIOS_CPU_". + +The configuration follows a two-stage process. In the first stage +the NIOS CPU core will defined like defined in Alteras SOPC Builder. +At this point we use the "CFG_NIOS_CPU_" defines exclusively. For +more informations about all the definitions you have to setup see +into current board configurations and doc/README.nios_CFG_NIOS_CPU. +In second stage we bring the NIOS CPU configuration in relation to +U-Boot configuration options/settings. The following is a list of +currently defined Nios-specific options/parameters used inside of +U-Boot. If any options are related to Standard-32 Nios SDK +excalibur.h definitions, the related definition follows the +description). CONFIG_NIOS -- defined for all Nios-32 boards. CFG_NIOS_CONSOLE -- the base address of the console UART. - (standard-32: na_uart1_base). + (standard-32: nasys_uart_0 resp. na_uart1_base). CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud parameter is set to '1'. @@ -71,10 +95,11 @@ CFG_NIOS_MULT_MSTEP -- use hardware assisted multiply using the CFG_NIOS_TMRBASE -- the base address of the timer used to support xxx_timer routines (e.g. set_timer(), get_timer(), etc.). - (standard-32: na_lo_priority_timer2_base). + (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base). CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to - the timer. (standard-32: na_low_priority_timer2_irq). + the timer. (standard-32: nasys_timer_1_irq resp. + na_low_priority_timer2_irq). CFG_NIOS_TMRMS -- the period of the timer in milliseconds. @@ -105,20 +130,56 @@ is an alias for 'subi %rB,1' that is supported by the assembler but does not appear in the programmer's manual. -4. BRAIN DAMAGE +4. BOOT PROCESS +--------------- + +4.1 Boot process over GERMS +--------------------------- +When the NIOS CPU catch a reset signal it will begin to be running +code from CFG_NIOS_CPU_RST_VECT. Normally at this place it will +find the GERMS monitor. That's the case for the generic NIOS CPU +configuration "standard_32". When the GERMS monitor starts running, +it performs important system initializations and then looks for +executable code in flash, using the following steps: + + 1. Examining the two bytes at CFG_NIOS_CPU_FLASH_BASE + 0x04000C. + 2. Examining the button 0 on the PIO CFG_NIOS_CPU_BUTTON_PIO. + 3. If the button is not pressed and the two bytes contain 'N' + and 'i', the monitor executes a CALL to location + CFG_NIOS_CPU_FLASH_BASE + 0x040000. + 4. If the code is not executed in step 3 or the code returns, + then prints an 8-digit version number to STDOUT and waits for + user commands from STDIN. + +In normal case, for "standard_32", STDIN and STDOUT are the first +serial port. + +4.2 Return to GERMS command line +-------------------------------- +During the boot process, the GERMS monitor checks for the existence +of application software in flash memory. If found, the processor +immediately executes the code. To return program execution to the +GERMS monitor (that is, avoid running code stored in flash memory): + + 1. Hold down CFG_NIOS_CPU_BUTTON_PIO, button number 0. + 2. Press then release the CPU reset button. + 3. Release CFG_NIOS_CPU_BUTTON_PIO, button number 0. + + +5. BRAIN DAMAGE ---------------- This section describes some of the unfortunate and avoidable aspects of working with the Nios CPU ... and some things you can do to reduce your pain. -4.1 GERMS doesn't work with Hyperterminal +5.1 GERMS doesn't work with Hyperterminal ------------------------------------------ GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal (or minicom) -- geez. Regardless of you opion of Hyperterminal, this sad design decision is remedied by using U-Boot. -4.2 cygwin Incompatibility +5.2 cygwin Incompatibility --------------------------- The version of cygwin distributed with the nios GNUPro toolchain is out-of-date and incompatible with the latest cygwin distributions. @@ -131,7 +192,7 @@ topic). The solution ... well, you can wait for Altera ... or build as set of tools for linux. -4.3 No native gcc +5.3 No native gcc ------------------ I'm not sure how this one slipped through the cracks ... but it is a real pain. Basically, if you want to build anything for the native @@ -140,9 +201,11 @@ and the old version of cygwin makes locating one challenging. The solution ... same as above. Just download the gcc source from Altera and build up a set of cross tools for your favorite linux -distro. +distro. Anybody who wants to use an already precompiled NIOS cross +toolchain can it found in the CDK4NIOS project hosted by Source +Forge at http://cdk4nios.sourceforge.net. -4.4 Can't build default U-Boot +5.4 Can't build default U-Boot ------------------------------- By default, when you build U-Boot you will be building some native tools along with the target elf, bin, and srec files. Without a @@ -167,7 +230,7 @@ environment.o: environment.c ../tools/envcrc BTW, thats a 'zero' ... not the letter 'O'. -5. HELP WANTED +6. HELP WANTED --------------- There are plenty of areas where help is needed. Here's are some ideas @@ -190,3 +253,6 @@ Regards, --Scott <smcnutt@psyent.com> + +--Stephan +<linz@li-pro.net> diff --git a/doc/README.nios_CFG_NIOS_CPU b/doc/README.nios_CFG_NIOS_CPU new file mode 100644 index 00000000000..e38ed917213 --- /dev/null +++ b/doc/README.nios_CFG_NIOS_CPU @@ -0,0 +1,140 @@ + +=============================================================================== + C F G _ N I O S _ C P U _ * v s . N I O S S D K +=============================================================================== + +When ever you have to make a new NIOS CPU configuration you can use this table +as a reference list to the original NIOS SDK symbols made by Alteras SOPC +Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc. +Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description +(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO. + +C O R E N I O S S D K [1],[7] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_CLK nasys_clock_freq +CFG_NIOS_CPU_ICACHE nasys_icache_size +CFG_NIOS_CPU_DCACHE nasys_dcache_size +CFG_NIOS_CPU_REG_NUMS nasys_nios_num_regs +CFG_NIOS_CPU_MUL __nios_use_multiply__ +CFG_NIOS_CPU_MSTEP __nios_use_mstep__ +CFG_NIOS_CPU_STACK nasys_stack_top +CFG_NIOS_CPU_VEC_BASE nasys_vector_table +CFG_NIOS_CPU_VEC_SIZE nasys_vector_table_size +CFG_NIOS_CPU_VEC_NUMS +CFG_NIOS_CPU_RST_VECT nasys_reset_address +CFG_NIOS_CPU_DBG_CORE nasys_debug_core +CFG_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes +CFG_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size +CFG_NIOS_CPU_ROM_BASE na_boot_monitor_rom +CFG_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size +CFG_NIOS_CPU_OCI_BASE nasys_oci_core +CFG_NIOS_CPU_OCI_SIZE +CFG_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem + nasys_data_mem +CFG_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size + nasys_data_mem_size +CFG_NIOS_CPU_SDRAM_BASE na_sdram +CFG_NIOS_CPU_SDRAM_SIZE na_sdram_size +CFG_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash + nasys_am29lv065d_flash_0 + nasys_flash_0 +CFG_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size + +T I M E R N I O S S D K [3] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_TIMER_NUMS nasys_timer_count +CFG_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9] +CFG_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq +CFG_NIOS_CPU_TIMER[0-9]_PER [ptf]:period + [ptf]:period_units + [ptf]:mult +CFG_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run +CFG_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period +CFG_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot + +U A R T N I O S S D K [2] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_UART_NUMS nasys_uart_count +CFG_NIOS_CPU_UART[0-9] nasys_uart_[0-9] +CFG_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq +CFG_NIOS_CPU_UART[0-9]_BR [ptf]:baud +CFG_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits +CFG_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits +CFG_NIOS_CPU_UART[0-9]_PA [ptf]:parity +CFG_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts +CFG_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register + +P I O N I O S S D K [4] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_PIO_NUMS nasys_pio_count +CFG_NIOS_CPU_PIO[0-9] nasys_pio_[0-9] +CFG_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq +CFG_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width +CFG_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri + [ptf]:has_out + [ptf]:has_in +CFG_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture +CFG_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type +CFG_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type + +S P I N I O S S D K [6] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_SPI_NUMS nasys_spi_count +CFG_NIOS_CPU_SPI[0-9] nasys_spi_[0-9] +CFG_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq +CFG_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits +CFG_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster +CFG_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves +CFG_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock +CFG_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay +CFG_NIOS_CPU_SPI[0-9]_* [ptf]:* + +I D E N I O S S D K +------------------------------------------------------------------------------- +CFG_NIOS_CPU_IDE_NUMS nasys_usersocket_count +CFG_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9] + +A S M I N I O S S D K [5] +------------------------------------------------------------------------------- +CFG_NIOS_CPU_ASMI_NUMS nasys_asmi_count +CFG_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9] +CFG_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq + +E t h e r n e t ( L A N ) N I O S S D K +------------------------------------------------------------------------------- +CFG_NIOS_CPU_LAN_NUMS +CFG_NIOS_CPU_LAN[0-9]_BASE na_lan91c111 +CFG_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET +CFG_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq +CFG_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH +CFG_NIOS_CPU_LAN[0-9]_TYPE + +s y s t e m c o m p o s i n g N I O S S D K +------------------------------------------------------------------------------- +CFG_NIOS_CPU_TICK_TIMER (na_low_priority_timer2) +CFG_NIOS_CPU_USER_TIMER (na_timer1) +CFG_NIOS_CPU_BUTTON_PIO (na_button_pio) +CFG_NIOS_CPU_LCD_PIO (na_lcd_pio) +CFG_NIOS_CPU_LED_PIO (na_led_pio) +CFG_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio) +CFG_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio) +CFG_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio) +CFG_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio) +CFG_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio) +CFG_NIOS_CPU_USER_SPI (na_spi) + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf +[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf +[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf +[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf +[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf +[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf +[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf + + +=============================================================================== +Stephan Linz <linz@li-pro.net> diff --git a/doc/README.nios_DK b/doc/README.nios_DK new file mode 100644 index 00000000000..b119d766829 --- /dev/null +++ b/doc/README.nios_DK @@ -0,0 +1,192 @@ + +=============================================================================== + H A R D W A R E O V E R V I E W +=============================================================================== +===============|===============|===============|===============|=============== + | DK20K200 | DK1C20 | DK1S10 | DK1S40 +---------------|---------------|---------------|---------------|--------------- + | | | | + Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00 + Rev. | pilot. | 01 | 01 | 00 + Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14 +[1] | | | | +===============|===============|===============|===============|=============== + | | | | + FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix" + | EP20K200E | EP1C20 | EP1S10 | EP1S40 + | | | + | (484 FBGA) | (400 FBGA) | (780 FBGA) +[2],[3],[4] | | | +---------------|---------------|---------------|---------------|--------------- + | | + Clock (OSC) | 33.333 MHz | 50 MHz + | | (with ext. supply) + | + | PI49FCT3805 +[5] | +---------------|---------------|---------------|---------------|--------------- + | | + Flash | 1 MByte | 8 MByte + | | + | AM29LV800BB | AM29LV065DU120REI + | 8/16 bit bus | 8 bit bus + | 1 chip | 1 chip +[6],[7] | | +---------------|---------------|---------------|---------------|--------------- + | | | + serial | no such | 4 MBits | no such + Flash | | | + | | EPCS4SI8 | +[8] | | | +---------------|---------------|---------------|---------------|--------------- + | | + Compact | no such, as | see below: prototype adapter + Flash (CF) | module only | + | | +---------------|---------------|---------------|---------------|--------------- + | | + SRAM | 256 KByte | 1 MByte + | | + | IDT71V016S | IDT71V416S10PH + | 32 bit bus | 32 bit bus + | 2 chips | 2 chips + | interlaced | interlaced +[9],[10] | | +---------------|---------------|---------------|---------------|--------------- + | | + SDRAM | SODIMM only | 16 MByte + | | + | | MT48LC4M32B2TG-7 + | 64 bit bus | 32 bit bus + | | 1 chip +[11] | | +===============|===============|===============|===============|=============== + | | + serial I/O | 1 RS232 | 2 RS232 + | | + | LTC1386 | MAX3237CAI + | | + | port 1: | port 1: + | RxD / TxD, | RxD / TxD, + | RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI + | | + | ! ! ! ! ! ! | port 2: | port 2: + | RTS/CTS can | RxD / TxD | RxD / TxD + | be RxD/TxD | | RTS / CTS, DTR / DSR + | of 2nd port | | DCD, RI +[12],[13] | ! ! ! ! ! ! | | +---------------|---------------|---------------|---------------|--------------- + | | + Ethernet | no such, as | 1 10BaseT / 100BaseT + | module only | + | | LAN91C111-NE + | | 32 bit bus + | | no external EEPROM + | | LEDA# for link + | | LEDB# for Rx / Tx +[14] | | +===============|===============|===============|===============|=============== + | | + user | 8 | no such + switches | SW[7..0] | + | | +---------------|---------------|---------------|---------------|--------------- + | + user push | 4 + buttons | PB[3..0] + | +---------------|---------------|---------------|---------------|--------------- + | | + user LEDs | 2 | 8 + | LED[1..0] | LED[7..0] + | | +---------------|---------------|---------------|---------------|--------------- + | + user seven | 2 + segment | HEX[1..0][G..A,DP] + | +===============|===============|===============|===============|=============== + | | + 3.3V proto- | w/o level | no such -- only 5V + type adapter | shift buffer | + | | + | 40 I/O pins | + | 1 card sel. | + | 1 reset out. | + | 1 OSC clock | + | 1 CPU clock | + | 1 clock out. | + | | +---------------|---------------|---------------|---------------|--------------- + | | + 5V prototype | with level | 2 ports -- both card ports supplied with its + adapter | shift buffer | own level shift buffer + | | + | 40 I/O pins | port 1 & 2: + | 1 card sel. | 41 I/O pins + | 1 Vee ? ? ? | 1 card select + | 1 reset out. | 1 reset output (from dev/board) + | 1 OSC clock | 1 OSC clock (from dev/board) + | 1 CPU clock | 1 CPU clock (from dev/board) + | 1 clock inp. | 1 clock input (to dev/board) + | | + | | (special) port 1: + | | 1 CF select + | | 1 CF present + | | 1 CF ATA select + | | 1 CF power + | | + | | NOTE: Both card ports are prepared for raw + | | IDE working. You can connect such + | | devices directly to the 40 pin header. + | | The signal PDIAG (passed diagnostic) + | | is not connected to any I/O signal. + | | Card port 1 is hard wired to the on + | | board Copact Flash adapter together + | | with all other signals needed by CF + | | cards. Hot plug should be working too. +[15],[16] | | +===============|===============|===============|===============|=============== + | | + config. CPLD | EPM7064 | EPM7128 + | | + (alternative | decition by | decision by + FPGA conf.) | jumper | push button + | | + | FPGA config. | FPGA config. | FPGA config. + | from Flash | from Flash | from Flash + | only | and EPCS4 | only + | | | +===============|===============|===============|===============|=============== +=============================================================================== + + +=============================================================================== + R E F E R E N C E S +=============================================================================== +[1] http://www.altera.com/literature/lit-nio.jsp +[2] http://www.altera.com/literature/lit-apx.jsp +[3] http://www.altera.com/literature/lit-cyc.jsp +[4] http://www.altera.com/literature/lit-stx.jsp +[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf + http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805 +[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf +[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf +[8] http://www.altera.com/literature/lit-config.html + http://preview.altera.com/literature/ds/micron.pdf +[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html +[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html +[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7 +[12] http://www.linear.com/prod/datasheet.html?datasheet=33 + http://www.linear.com/pdf/1386fa.pdf +[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en + http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf +[14] http://www.smsc.com/main/catalog/lan91c111.html +[15] http://www.t13.org/index.html +[16] http://www.compactflash.org/faqs/faq.htm + + +=============================================================================== +Stephan Linz <linz@li-pro.net> |